Effect of pre-annealing on the formation of the ω-phase in the Ti-2 wt%V alloy after high-pressure torsion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Donachie Jr MJ (2000) Titanium: A technical guide, 2nd ed. ASM International: Materials Park, OH. 1–28010.31399/asm.tb.ttg2.9781627082693 ↗
2. Boyer R, Collings EW, Welsch G (1994) Materials properties handbook: titanium alloys, ASM International, Materials Park, OH. 1–310
3. Straumal BB, Kilmametov AR, Ivanisenko Yu, Gornakova AS, Mazilkin AA, Kriegel MJ, Fabrichnaya OB, Baretzky B, Hahn H (2015) Phase transformations in Ti–Fe alloys induced by high pressure torsion. Adv Eng Mater 17:1835–1841. https://doi.org/10.1002/adem.20150014310.1002/adem.201500143 ↗
4. Kutsar AR, Pavlovskii MN, Komissarov VV (1982) The observation of two-wave configuration of shock wave in titanium. JETP Lett 35:108–112
5. Sikka SK, Vohra YK, Chidambaram R (1982) Omega phase in materials. Prog Mater Sci 27:245–310. https://doi.org/10.1016/0079-6425(82)90002-010.1016/0079-6425(82)90002-0 ↗
6. Jamieson JC (1963) Crystal structures of titanium, zirconium, and hafnium at high pressures. Science 140:72–73. https://doi.org/10.1126/science.140.3562.7210.1126/science.140.3562.72 ↗
7. Hickman BS (1969) The formation of omega phase in Ti and Zr alloys: a review. J Mater Sci 4:554–563. https://doi.org/10.1007/BF0055021710.1007/BF00550217 ↗
8. Panigrahi A, Bönisch M, Waitz T, Schafler E, Calin M, Eckert J, Skrotzki W, Zehetbauer M (2015) Phase transformations and mechanical properties of biocompatible Ti–16.1Nb processed by severe plastic deformation. J Alloys Compd 628:434–441. https://doi.org/10.1016/j.jallcom.2014.12.15910.1016/j.jallcom.2014.12.159 ↗
9. Dai N, Zhang LC, Zhang J, Zhang X, Ni Q, Chen Y, Wu M, Yang C (2016) Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes. Corr Sci. 111:703–710. https://doi.org/10.1016/j.prostr.2020.10.09210.1016/j.prostr.2020.10.092 ↗
10. Murray JL (1987) Phase diagrams of binary titanium alloys, 2nd ed. ASM International, Metals Park, Ohio, 1–250
11. Hong K-M, Shin YC (2016) Analysis of microstructure and mechanical properties change in laser welding of Ti6Al4V with a multiphysics prediction model. J Mater Proc Technol 237:420–429. https://doi.org/10.1016/j.jmatprotec.2016.06.03410.1016/j.jmatprotec.2016.06.034 ↗
12. Yang J, Yu H, Yin J, Gao M, Wang Z, Zeng X (2016) Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Mater Design 108:308–318. https://doi.org/10.1016/j.matdes.2016.06.11710.1016/j.matdes.2016.06.117 ↗
13. Zhao P, Fu L, Chen H (2016) Low cycle fatigue properties of linear friction welded joint of TC11 and TC17 titanium alloys. J Alloys Compd 675:248–256. https://doi.org/10.1016/j.jallcom.2016.03.11310.1016/j.jallcom.2016.03.113 ↗
14. Usikov MP, Zilbershtein VA (1973) The orientation relationship between the α- and ω-phases of titanium and zirconium. Phys Status Sol A 19:53–58. https://doi.org/10.1002/pssa.221019010310.1002/pssa.2210190103 ↗
15. Xia H, Parthasarathy G, Luo H, Vohra YK, Ruoff AL (1990) Crystal structures of group IVa metals at ultrahigh pressures. Phys Rev B 42:6736–6738. https://doi.org/10.1103/PhysRevB.42.673610.1103/PhysRevB.42.6736 ↗
16. Zhang J, Zhao Y, Hixson RS, Gray GT III, Wang L, Wataru U, Saito H, Hattori T (2008) Experimental constraints on the phase diagram of titanium metal. J Phys Chem Sol 69:2559–2563. https://doi.org/10.1016/j.jpcs.2008.05.01610.1016/j.jpcs.2008.05.016 ↗
17. Vohra YK, Sikka SK, Vaidya SN, Chidambaram R (1977) Impurity effects and reaction kinetics of the pressure-induced α → ω transformation in Ti. J Phys Chem Sol 38:1293–1296. https://doi.org/10.1016/0022-3697(77)90031-210.1016/0022-3697(77)90031-2 ↗
18. Errandonea D, Meng Y, Somayazulu M, Häusermann D (2005) Pressure-induced α → ω transition in titanium metal: a systematic study of the effects of uniaxial stress. Physica B 355:116–125. https://doi.org/10.1016/j.physb.2004.10.03010.1016/j.physb.2004.10.030 ↗
19. Velisavljevic N, MacLeod S, Cynn H (2012) Titanium alloys at extreme pressure conditions. In: Amin N (ed) Titanium alloys—towards achieving enhanced properties for diversified applications. InTech. 67–86. https://doi.org/10.5772/3603810.5772/36038 ↗
20. Trinkle DR, Hennig RG, Srinivasan SG, Hatch DM, Jones MD, Stokes HT, Albers RC, Wilkins JW (2003) New mechanism for the α to ω martensitic transformation in pure titanium. Phys Rev Lett 91:025701. https://doi.org/10.1103/PhysRevLett.91.02570110.1103/PhysRevLett.91.025701 ↗
21. Dobromyslov AV, Elkin VA (2001) Martensitic transformation and metastable β-phase in binary titanium alloys with d-metals of 4–6 periods. Scripta Mater 44:905–910. https://doi.org/10.1016/S1359-6462(00)00694-110.1016/S1359-6462(00)00694-1 ↗
22. Dobromyslov AV, Elkin VA (2006) The orthorhombic α″-phase in binary titanium-base alloys with d-metals of V-VIII groups. Mater Sci Eng A 438:324–326. https://doi.org/10.1016/j.msea.2006.02.08610.1016/j.msea.2006.02.086 ↗
23. Edalati K, Matsubara E, Horita Z (2009) Processing pure Ti by high-pressure torsion in wide ranges of pressures and strain. Metal Mater Trans A 40:2079–2086. https://doi.org/10.1007/s11661-009-9890-510.1007/s11661-009-9890-5 ↗
24. Islamgaliev RK, Kazyhanov VU, Shestakova LO, Sharafutdinov AV, Valiev RZ (2008) Microstructure and mechanical properties of titanium (grade 4) processed by high-pressure torsion. Mater Sci Eng A 493:190–194. https://doi.org/10.1016/j.msea.2007.08.08410.1016/j.msea.2007.08.084 ↗
25. Sergueeva AV, Stolyarov VV, Valiev RZ, Mukherjee AK (2001) Advanced mechanical properties of pure titanium with ultrafine grained structure. Scripta Mater 45:747–752. https://doi.org/10.1016/S1359-6462(01)01089-210.1016/S1359-6462(01)01089-2 ↗
26. Valiev RZ, Sergueeva AV, Mukherjee AK (2003) The effect of annealing on tensile deformation behavior of nanostructured SPD titanium. Scripta Mater 49:669–674. https://doi.org/10.1016/S1359-6462(03)00395-610.1016/S1359-6462(03)00395-6 ↗
27. Todaka I, Sasaki J, Moto T, Umemoto M (2008) Bulk submicrocrystalline ω-Ti produced by high-pressure torsion straining. Scripta Mater 59:615–618. https://doi.org/10.1016/j.scriptamat.2008.05.01510.1016/j.scriptamat.2008.05.015 ↗
28. Todaka I, Umemoto M, Yamazaki A, Sasaki J, Tsuchiya K (2008) Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium. Mater Trans 49:47–53. https://doi.org/10.2320/matertrans.ME20071410.2320/matertrans.ME200714 ↗
29. Ivanisenko Y, Kilmametov A, Rösner H, Valiev RZ (2008) Evidence of α→ ω phase transition in titanium after high pressure torsion. Int J Mater Res 99:36–41. https://doi.org/10.3139/146.10160610.3139/146.101606 ↗
30. Valiev RZ (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nature Mater Res 3:511–516. https://doi.org/10.1038/nmat118010.1038/nmat1180 ↗
31. Valiev RZ, Alexandrov IV, Zhu YT, Lowe TC (2002) Paradox of strength and ductility in metals processed by severe plastic deformation. J Mater Res 17:5–8. https://doi.org/10.1557/JMR.2002.000210.1557/JMR.2002.0002 ↗
32. Edalati K, Horita Z, Mine Y (2010) High-pressure torsion of hafnium. Mater Sci Eng A 527:2136–2141. https://doi.org/10.1016/j.msea.2009.11.06010.1016/j.msea.2009.11.060 ↗
33. Zhilyaev AP, Sabirov I, González-Doncela G, Molina-Aldareguía J, Srinivasarao B, Pérez-Prado MT (2011) Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions. Mater Sci Eng A 528:3496–3505. https://doi.org/10.1016/j.msea.2011.01.06210.1016/j.msea.2011.01.062 ↗
34. Nosova GI (1968) Phase transformations in titanium alloys, 1st ed. Metallurgy. 1–180
35. Zwicker U (1974) Titan und titanlegierungen, 1st ed. Springer-Verlag. 1–51110.1007/978-3-642-80587-5_1 ↗
36. Ilyin AA, Kolachev BA, Polkin IS (2009) Titanium alloys, 1st ed. VILS-MATI, 520
37. Massalski TB, Murray JL, Bennett LH, Baker H (1986) Binary alloy phase diagrams. Am Soc Metals, Metals Park, Ohio 2:2384–2386
38. Murray JL (1981) The Ti–V (titanium-vanadium) system. Bull alloy ph diagr, Cent Mater Res 2:48–5510.1007/BF02873703 ↗
39. Hu B, Sridar S, Hao L, Xiong W (2020) A new thermodynamic modeling of the Ti–V system including the metastable ω phase. Interme 122:106791. https://doi.org/10.1016/j.intermet.2020.10679110.1016/j.intermet.2020.106791 ↗
40. Campos-Quirós A, Cubero-Sesín JM, Edalati K (2020) Synthesis of nanostructured biomaterials by high-pressure torsion: effect of niobium content on microstructure and mechanical properties of Ti-Nb alloys. Mater Sci Eng A 795:139972. https://doi.org/10.1016/j.msea.2020.13997210.1016/j.msea.2020.139972 ↗
41. Cvijović-Alagić I, Rakin M, Laketić S, Zagorac D (2020) Microstructural study of Ti45Nb alloy before and after HPT processing using experimental and ab initio data mining approach. Mater Charact 169:110635. https://doi.org/10.1016/j.matchar.2020.11063510.1016/j.matchar.2020.110635 ↗
42. Edalati K, Daio T, Lee S, Horita Z, Nishizaki T, Akune T, Sasaki T (2014) High strength and superconductivity in nanostructured niobium–titanium alloy by high-pressure torsion and annealing: significance of elemental decomposition and supersaturation. Acta Mater 80:149–158. https://doi.org/10.1016/j.actamat.2014.07.06510.1016/j.actamat.2014.07.065 ↗
43. Korneva A, Straumal B, Kilmametov A, Kopacz S, Szczerba M, Cios G, Chulist R (2022) Phase transitions and mechanical behavior of Ti–3 wt% Nb alloy after high pressure torsion and low-temperature annealing. Mater Sci Eng A 857:144096. https://doi.org/10.1016/j.msea.2022.14409610.1016/j.msea.2022.144096 ↗
44. Deng G, Bhattacharjee T, Chong Y, Zheng R, Bai Y, Shibata A, Tsuji N (2020) Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion. J Alloys Compd 822:153604. https://doi.org/10.1016/j.jallcom.2019.15360410.1016/j.jallcom.2019.153604 ↗
45. Gornakova AS, Straumal BB, Mazilkin AA, Afonikova NS, Karpov MI, Novikova EA, Tyurin AI (2021) Phase composition, nanohardness and Young’s modulus in Ti-Fe alloys after heat treatment and high pressure torsion. Metals 11:1657. https://doi.org/10.3390/met1110165710.3390/met11101657 ↗
46. Straumal BB, Kilmametov AR, Ivanisenko Y, Mazilkin AA, Valiev RZ, Afonikova NS, Hahn H (2018) Diffusive and displacive phase transitions in Ti–Fe and Ti–Co alloys under high pressure torsion. J Alloys Compd 735:2281–2286. https://doi.org/10.1016/j.jallcom.2017.11.31710.1016/j.jallcom.2017.11.317 ↗
47. Kilmametov A, Ivanisenko Y, Straumal BB, Mazilkin AA, Gornakova AS, Kriegel MJ, Hahn H (2017) Transformations of α’martensite in Ti–Fe alloys under high pressure torsion. Scripta Mater 136:46–49. https://doi.org/10.1016/j.scriptamat.2017.04.01010.1016/j.scriptamat.2017.04.010 ↗
48. Janeček M, Čížek J, Stráský J, Václavová K, Hruška P, Polyakova V, Semenova I (2014) Microstructure evolution in solution treated Ti15Mo alloy processed by high pressure torsion. Mater Charact 98:233–240. https://doi.org/10.1016/j.matchar.2014.10.02410.1016/j.matchar.2014.10.024 ↗
49. Meenakshi KS, Kumar SA (2022) Corrosion resistant behaviour of titanium–Molybdenum alloy in sulphuric acid environment. Mater Today Procs 65:3282–3287. https://doi.org/10.1016/j.matpr.2022.05.38910.1016/j.matpr.2022.05.389 ↗
50. Kerber M, Waitz T, Matsuda M (2023) Structural changes of TiPt high-temperature shape memory alloys induced by high pressure torsion. J Alloys Compd 935:168037. https://doi.org/10.1016/j.jallcom.2022.16803710.1016/j.jallcom.2022.168037 ↗
51. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
52. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19:3–20. https://doi.org/10.1557/jmr.2004.19.1.310.1557/jmr.2004.19.1.3 ↗
53. Oliver WC, Pharr GM (2010) Nanoindentation in materials research: past, present, and future. MRS Bull 35:897–907. https://doi.org/10.1557/mrs2010.71710.1557/mrs2010.717 ↗
54. Kilmametov A, Ivanisenko Yu, Mazilkin AA, Straumal BB, Gornakova AS, Fabrichnaya OB, Kriegel MJ, Rafaja D, Hahn H (2018) The α → ω and β → ω phase transformations in Ti–Fe alloys under high-pressure torsion. Acta Mater 144:337. https://doi.org/10.1016/j.actamat.2017.10.05110.1016/j.actamat.2017.10.051 ↗
55. Korneva A, Straumal BB, Kilmametov AR, Gondek Ł, Wierzbicka-Miernik A, Lityńska-Dobrzyńska L, Chulist R, Cios G, Zięba P (2021) The α ↔ ω phase transformations and thermal stability of Ti–Co alloy treated by high pressure torsion. Mater Charact 80:110937. https://doi.org/10.1016/j.matchar.2021.11093710.1016/j.matchar.2021.110937 ↗
56. Korneva A, Straumal B, Gornakova A, Kilmametov A, Gondek Ł, Lityńska-Dobrzyńska L, Chulist R, Pomorska M, Zięba P (2022) Formation and thermal stability of ω-phase in Ti–Nb and Ti–Mo alloys subjected to HPT. Materials 15:4136. https://doi.org/10.3390/ma1512413610.3390/ma15124136 ↗
57. Korneva A, Straumal B, Kilmametov A, Lityńska-Dobrzyńska L, Chulist R, Gondek Ł, Zięba P (2022) The phase transformations induced by high-pressure torsion in Ti–Nb-based alloys. Microsc Microanal 28:946. https://doi.org/10.1017/S143192762101227710.1017/S1431927621012277 ↗
58. Huang Y, Mortier S, Pereira PHR, Bazarnik P, Lewandowska M, Langdon TG (2017) Thermal stability and mechanical properties of HPT processed CP–Ti. In: IOP Conf. Ser.: Mater Sci Eng. 194:012012. https://doi.org/10.1088/1757-899X/194/1/01201210.1088/1757-899X/194/1/012012 ↗
59. Zayed EM, Shazly M, El-Sabbagh A, El-Mahallawy NA (2023) Deformation behavior and properties of severe plastic deformation techniques for bulk materials: a review. Heliyon 9:e16700. https://doi.org/10.1016/j.heliyon.2023.e1670010.1016/j.heliyon.2023.e16700 ↗
60. Atefi S, Parsa MH, Ahmadkhaniha D, Zanella C, Jafarian HR (2022) A study on microstructure development and mechanical properties of pure copper subjected to severe plastic deformation by the ECAP-conform process. J Mater Res Technol 21:1614–1629. https://doi.org/10.1016/j.jmrt.2022.09.10310.1016/j.jmrt.2022.09.103 ↗
61. Edalati K, Horita Z (2016) A review on high-pressure torsion (HPT) from 1935 to 1988. Mater Sci Eng A 652:325–352. https://doi.org/10.1016/j.msea.2015.11.07410.1016/j.msea.2015.11.074 ↗
62. Jiang B, Men D, Emura S, Tsuchiya K (2023) Microstructural response and mechanical properties of α-precipitated Ti-5Al-5Mo-5V-3Cr alloy processed by high-pressure torsion. J Mater Res Technol 23:564–576. https://doi.org/10.1016/j.jmrt.2023.01.04710.1016/j.jmrt.2023.01.047 ↗
63. Sun K, Sun B, Yi X, Yaqian Y, Meng X, Gao Z, Cai W (2022) The microstructure and martensitic transformation of Ti-13 V-3Al light weight shape memory alloy deformed by high-pressure torsion. J Alloys Compd 895:162612. https://doi.org/10.1016/j.jallcom.2021.16261210.1016/j.jallcom.2021.162612 ↗
64. Shahmir H, Langdon TG (2016) Characteristics of the allotropic phase transformation in titanium processed by high-pressure torsion using different rotation speeds. Mater Sci Eng A 667:293–299. https://doi.org/10.1016/j.msea.2016.05.00110.1016/j.msea.2016.05.001 ↗
65. Chen W, Xu J, Liu D, Bao J, Sabbaghianrad S, Shan D, Langdon TG (2020) Microstructural evolution and microhardness variations in pure titanium processed by high-pressure torsion. Adv Eng Mater 22:1901462. https://doi.org/10.1002/adem.20190146210.1002/adem.201901462 ↗