Interface regulation strategies toward the challenges faced by cathode materials and solid electrolytes

1. Grey CP, Tarascon JM (2016) Sustainability and in situ monitoring in battery development. Nat Mater 16:45–56. https://doi.org/10.1038/nmat477710.1038/nmat4777 ↗

2. Zhang H, Li C, Piszcz M, Coya E, Rojo T, Rodriguez-Martinez LM, Armand M, Zhou Z (2017) Single lithium-ion conducting solid polymer electrolytes: advances and perspectives. Chem Soc Rev 46:797–815. https://doi.org/10.1039/c6cs00491a10.1039/c6cs00491a ↗

3. Xia S, Wu X, Zhang Z, Cui Y, Liu W (2019) Practical challenges and future perspectives of all-solid-state lithium-metal batteries. Chem 5:753–785. https://doi.org/10.1016/j.chempr.2018.11.01310.1016/j.chempr.2018.11.013 ↗

4. Jiang, Y. et al. Development of the PEO based solid polymer electrolytes for all-solid state lithium ion batteries. Polymers (Basel) 10(11), 1237. https://doi.org/10.3390/polym10111237 (2018).10.3390/polym10111237 ↗

5. Janek J, Zeier WG (2016) A solid future for battery development. Nat Energy 1:1–4. https://doi.org/10.1038/nenergy.2016.14110.1038/nenergy.2016.141 ↗

6. Kamaya N, Homma K, Yamakawa Y, Hirayama M, Kanno R, Yonemura M, Kamiyama T, Kato Y, Hama S, Kawamoto K, Mitsui A (2011) A lithium superionic conductor. Nat Mater 10:682–686. https://doi.org/10.1038/nmat306610.1038/nmat3066 ↗

7. Seino Y, Ota T, Takada K, Hayashi A, Tatsumisago M (2014) A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries. Energy Environ Sci 7:627–631. https://doi.org/10.1039/c3ee41655k10.1039/c3ee41655k ↗

8. Chen X, He W, Ding L-X, Wang S, Wang H (2019) Enhancing interfacial contact in all solid state batteries with a cathode-supported solid electrolyte membrane framework. Energy Environ Sci 12:938–944. https://doi.org/10.1039/c8ee02617c10.1039/c8ee02617c ↗

9. Kazyak E, Chen K-H, Wood KN, Davis AL, Thompson T, Bielinski AR, Sanchez AJ, Wang X, Wang C, Sakamoto J, Dasgupta NP (2017) Atomic layer deposition of the solid electrolyte garnet Li7La3Zr2O12. Chem Mater 29:3785–3792. https://doi.org/10.1021/acs.chemmater.7b0094410.1021/acs.chemmater.7b00944 ↗

10. Loho C, Djenadic R, Bruns M, Clemens O, Hahn H (2016) Garnet-type Li7La3Zr2O12 solid electrolyte thin films grown by CO2-laser assisted CVD for all-solid-state batteries. J Electrochem Soc 164:A6131–A6139. https://doi.org/10.1149/2.0201701jes10.1149/2.0201701jes ↗

11. Matsuyama T, Takano R, Tadanaga K, Hayashi A, Tatsumisago M (2016) Fabrication of all-solid-state lithium secondary batteries with amorphous TiS4 positive electrodes and Li7La3Zr2O12 solid electrolytes. Solid State Ion 285:122–125. https://doi.org/10.1016/j.ssi.2015.05.02510.1016/j.ssi.2015.05.025 ↗

12. Tan J, Tiwari A (2012) Fabrication and characterization of Li7La3Zr2O12 thin films for lithium Ion battery. ECS Solid State Lett 1:Q57–Q60. https://doi.org/10.1149/2.013206ssl10.1149/2.013206ssl ↗

13. Xu X, Takada K, Fukuda K, Ohnishi T, Akatsuka K, Osada M, Hang BT, Kumagai K, Sekiguchi T, Sasaki T (2011) Tantalum oxide nanomesh as self-standing one nanometre thick electrolyte. Energy Environ Sci 4:3509–3512. https://doi.org/10.1039/c1ee01389k10.1039/c1ee01389k ↗

14. Woo JH, Trevey JE, Cavanagh AS, Choi YS, Kim SC, George SM, Oh KH, Lee S-H (2012) Nanoscale interface modification of LiCoO2 by Al2O3 atomic layer deposition for solid-state Li batteries. J Electrochem Soc 159:A1120–A1124. https://doi.org/10.1149/2.085207jes10.1149/2.085207jes ↗

15. Ohta N, Takada K, Zhang L, Ma R, Osada M, Sasaki T (2006) Enhancement of the high-rate capability of solid-state lithium batteries by nanoscale interfacial modification. Adv Mater 18:2226–2229. https://doi.org/10.1002/adma.20050260410.1002/adma.200502604 ↗

16. Takada K, Ohta N, Zhang L, Xu X, Hang BT, Ohnishi T, Osada M, Sasaki T (2012) Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte. Solid State Ion 225:594–597. https://doi.org/10.1016/j.ssi.2012.01.00910.1016/j.ssi.2012.01.009 ↗

17. Ohta N, Takada K, Sakaguchi I, Zhang L, Ma R, Fukuda K, Osada M, Sasaki T (2007) LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries. Electrochem Commun 9:1486–1490. https://doi.org/10.1016/j.elecom.2007.02.00810.1016/j.elecom.2007.02.008 ↗

18. Sakuda A, Kitaura H, Hayashi A, Tadanaga K, Tatsumisago M (2009) All-solid-state lithium secondary batteries with oxide-coated LiCoO2 electrode and Li2S–P2S5 electrolyte. J Power Sources 189:527–530. https://doi.org/10.1016/j.jpowsour.2008.10.12910.1016/j.jpowsour.2008.10.129 ↗

19. Sakuda A (2009) Modfication of interface between LiCoO2 electrode and Li2S–P2S5 solid electrolyte using Li2O–SiO2 glassy layers. J Electrochem Soc 156:A27–A32. https://doi.org/10.1149/1.300597210.1149/1.3005972 ↗

20. Sakurai Y, Sakuda A, Hayashi A, Tatsumisago M (2011) Preparation of amorphous Li4SiO4–Li3PO4 thin films by pulsed laser deposition for all-solid-state lithium secondary batteries. Solid State Ion 182:59–63. https://doi.org/10.1016/j.ssi.2010.12.00110.1016/j.ssi.2010.12.001 ↗

21. Chang, B. et al. Highly elastic binder for improved cyclability of nickel-rich layered cathode materials in lithium-ion batteries. Adv. Energy Mater. 10, 2001069. https://doi.org/10.1002/aenm.202001069 (2020).10.1002/aenm.202001069 ↗

22. Li, S. et al. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries. Adv. Sci. (Weinh) 7, 1903088. https://doi.org/10.1002/advs.201903088 (2020).10.1002/advs.201903088 ↗

23. Devaux D, Glé D, Phan TNT, Gigmes D, Giroud E, Deschamps M, Denoyel R, Bouchet R (2015) Optimization of block copolymer electrolytes for lithium metal batteries. Chem Mater 27:4682–4692. https://doi.org/10.1021/acs.chemmater.5b0127310.1021/acs.chemmater.5b01273 ↗

24. Masayoshi Watanabe TH, Mutoh S (2002) Polymer electrolytes derived from dendritic polyether macromonomers. Solid State Ion 148:339–404. https://doi.org/10.1016/S0167-2738(02)00079-610.1016/S0167-2738(02)00079-6 ↗

25. An SY, Jeong IC, Won M-S, Jeong ED, Shim Y-B (2009) Effect of additives in PEO/PAA/PMAA composite solid polymer electrolytes on the ionic conductivity and Li ion battery performance. J Appl Electrochem 39:1573–1578. https://doi.org/10.1007/s10800-009-9843-010.1007/s10800-009-9843-0 ↗

26. Fan LZ, Hu YS, Bhattacharyya AJ, Maier J (2007) Succinonitrile as a versatile additive for polymer electrolytes. Adv Funct Mater 17:2800–2807. https://doi.org/10.1002/adfm.20060107010.1002/adfm.200601070 ↗

27. Quartarone E, Mustarelli P (2011) Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. Chem Soc Rev 40:2525–2540. https://doi.org/10.1039/c0cs00081g10.1039/c0cs00081g ↗

28. Y,i .S. et al. Fast ion conductor modified double-polymer (PVDF and PEO) matrix electrolyte for solid lithium-ion batteries. Solid State Ion 355, 115419. https://doi.org/10.1016/j.ssi.2020.115419 (2020).10.1016/j.ssi.2020.115419 ↗

29. Luo, W. et al. Reducing interfacial resistance between garnet-structured solid-state electrolyte and Li-metal anode by a germanium layer. Adv. Mater. 29, 1606042. https://doi.org/10.1002/adma.201606042 (2017).10.1002/adma.201606042 ↗

30. Wang D, Zhong G, Dolotko O, Li Y, McDonald MJ, Mi J, Fu R, Yang Y (2014) The synergistic effects of Al and Te on the structure and Li+-mobility of garnet-type solid electrolytes. J Mater Chem A 2:20271–20279. https://doi.org/10.1039/c4ta03591g10.1039/c4ta03591g ↗

31. Hu S, Li Y-F, Yang R, Yang Z, Wang L (2018) Structure and ionic conductivity of Li7La3Zr2−xGexO12 garnet-like solid electrolyte for all solid state lithium ion batteries. Ceram Int 44:6614–6618. https://doi.org/10.1016/j.ceramint.2018.01.06510.1016/j.ceramint.2018.01.065 ↗

32. Ohta S, Seki J, Yagi Y, Kihira Y, Tani T, Asaoka T (2014) Co-sinterable lithium garnet-type oxide electrolyte with cathode for all-solid-state lithium ion battery. J Power Sources 265:40–44. https://doi.org/10.1016/j.jpowsour.2014.04.06510.1016/j.jpowsour.2014.04.065 ↗

33. Hitz GT, McOwen DW, Zhang L, Ma Z, Fu Z, Wen Y, Gong Y, Dai J, Hamann TR, Hu L, Wachsman ED (2019) High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture. Mater Today 22:50–57. https://doi.org/10.1016/j.mattod.2018.04.00410.1016/j.mattod.2018.04.004 ↗

34. Xu S, McOwen DW, Wang C, Zhang L, Luo W, Chen C, Li Y, Gong Y, Dai J, Kuang Y, Yang C, Hamann TR, Wachsman ED, Hu L (2018) Three-dimensional, solid-state mixed electron-ion conductive framework for lithium metal anode. Nano Lett 18:3926–3933. https://doi.org/10.1021/acs.nanolett.8b0129510.1021/acs.nanolett.8b01295 ↗

35. Fu K, Gong Y, Hitz GT, McOwen DW, Li Y, Xu S, Wen Y, Zhang L, Wang C, Pastel G, Dai J, Liu B, Xie H, Yao Y, Wachsman ED, Hu L (2017) Three-dimensional bilayer garnet solid electrolyte based high energy density lithium metal–sulfur batteries. Energy Environ Sci 10:1568–1575. https://doi.org/10.1039/c7ee01004d10.1039/c7ee01004d ↗

36. Han F, Yue J, Chen C, Zhao N, Fan X, Ma Z, Gao T, Wang F, Guo X, Wang C (2018) Interphase engineering enabled all-ceramic lithium battery. Joule 2:497–508. https://doi.org/10.1016/j.joule.2018.02.00710.1016/j.joule.2018.02.007 ↗

37. Wang J, Zhao S, Tang L, Han F, Zhang Y, Xia Y, Wang L, Lu S (2022) Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries. Int J Miner Metall Mater 29:1003–1018. https://doi.org/10.1007/s12613-022-2453-010.1007/s12613-022-2453-0 ↗

38. Mizushima PCJK, Wiseman PJ, Goodenough JB (1980) LixCoO2(0<x<=1): a new cathode material for batteries of high energy density. Mater Res Bull 15:783–789. https://doi.org/10.1016/0167-2738(81)90077-110.1016/0167-2738(81)90077-1 ↗

39. Qiu, J. et al. Enabling stable cycling of 4.2 V high-voltage all-solid-state batteries with PEO-based solid electrolyte. Adv Funct Mater 30, 1909392. https://doi.org/10.1002/adfm.201909392 (2020).10.1002/adfm.201909392 ↗

40. Liang J, Sun Y, Zhao Y, Sun Q, Luo J, Zhao F, Lin X, Li X, Li R, Zhang L, Lu S, Huang H, Sun X (2020) Engineering the conductive carbon/PEO interface to stabilize solid polymer electrolytes for all-solid-state high voltage LiCoO2 batteries. J Mater Chem A 8:2769–2776. https://doi.org/10.1039/c9ta08607b10.1039/c9ta08607b ↗

41. Zhou, W. et al. Double-layer polymer electrolyte for high-voltage all-solid-state rechargeable batteries. Adv Mater 31, e1805574. https://doi.org/10.1002/adma.201805574 (2019).10.1002/adma.201805574 ↗

42. Jeon, Y. M., Kim, S., Lee, M., Lee, W. B. & Park, J. H. Polymer-clay nanocomposite solid-state electrolyte with selective cation transport boosting and retarded lithium dendrite formation. Adv Energy Mater 10, 2003114. https://doi.org/10.1002/aenm.202003114 (2020).10.1002/aenm.202003114 ↗

43. Chen Y, Huo F, Chen S, Cai W, Zhang S (2021) In-built quasi-solid-state poly-ether electrolytes enabling stable cycling of high-voltage and wide-temperature Li metal batteries. Adv Funct Mater 31, 2102347:1–10. https://doi.org/10.1002/adfm.20210234710.1002/adfm.202102347 ↗

44. Ihrig M, Finsterbusch M, Laptev AM, Tu CH, Tran NTT, Lin CA, Kuo LY, Ye R, Sohn YJ, Kaghazchi P, Lin SK, Fattakhova-Rohlfing D, Guillon O (2022) Study of LiCoO2/Li7La3Zr2O12: Ta interface degradation in all-solid-state lithium batteries. ACS Appl Mater Interfaces 14:11288–11299. https://doi.org/10.1021/acsami.1c2224610.1021/acsami.1c22246 ↗

45. Chandra S, Kim Y, Vivona D, Waluyo I, Hunt A, Schlueter C, Lee JB, Shao-Horn Y, Yildiz B (2022) Thermally-driven reactivity of Li0.35La0.55TiO3 solid electrolyte with LiCoO2 cathode. J Mater Chem A 10:3485–3494. https://doi.org/10.1039/d1ta08853j10.1039/d1ta08853j ↗

46. Kato T, Hamanaka T, Yamamoto K, Hirayama T, Sagane F, Motoyama M, Iriyama Y (2014) In-situ Li7La3Zr2O12/LiCoO2 interface modification for advanced all-solid-state battery. J Power Sources 260:292–298. https://doi.org/10.1016/j.jpowsour.2014.02.10210.1016/j.jpowsour.2014.02.102 ↗

47. Park K, Yu B-C, Jung J-W, Li Y, Zhou W, Gao H, Son S, Goodenough JB (2016) Electrochemical nature of the cathode interface for a solid-state lithium-ion battery: interface between LiCoO2 and garnet-Li7La3Zr2O12. Chem Mater 28:8051–8059. https://doi.org/10.1021/acs.chemmater.6b0387010.1021/acs.chemmater.6b03870 ↗

48. Singh K (1997) Electrical conductivity of Li2O–B2O3–Bi2O3: a mixed conductor. Solid State Ion 93:147–158. https://doi.org/10.1016/S0167-2738(96)00469-910.1016/S0167-2738(96)00469-9 ↗

49. Wang J, Chen R, Yang L, Zan M, Chen P, Li Y, Li W, Yu H, Yu X, Huang X, Chen L, Li H (2022) Raising the intrinsic safety of layered oxide cathodes by surface re-lithiation with LLZTO garnet-type solid electrolytes. Adv Mater 34, e2200655:1–12. https://doi.org/10.1002/adma.20220065510.1002/adma.202200655 ↗

50. Okumura T, Nakatsutsumi T, Ina T, Orikasa Y, Arai H, Fukutsuka T, Iriyama Y, Uruga T, Tanida H, Uchimoto Y, Ogumi Z (2011) Depth-resolved X-ray absorption spectroscopic study on nanoscale observation of the electrode–solid electrolyte interface for all solid state lithium ion batteries. J Mater Chem 21:10051–10060. https://doi.org/10.1039/c0jm04366d10.1039/c0jm04366d ↗

51. Morimoto H, Awano H, Terashima J, Shindo Y, Nakanishi S, Ito N, Ishikawa K, Tobishima S-I (2013) Preparation of lithium ion conducting solid electrolyte of NASICON-type Li1+xAlxTi2−x(PO4)3 (x = 0.3) obtained by using the mechanochemical method and its application as surface modification materials of LiCoO2 cathode for lithium cell. J Power Sources 240:636–643. https://doi.org/10.1016/j.jpowsour.2013.05.03910.1016/j.jpowsour.2013.05.039 ↗

52. Yang Q, Huang J, Li Y, Wang Y, Qiu J, Zhang J, Yu H, Yu X, Li H, Chen L (2018) Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries. J Power Sources 388:65–70. https://doi.org/10.1016/j.jpowsour.2018.03.07610.1016/j.jpowsour.2018.03.076 ↗

53. Wang Z, Santhanagopalan D, Zhang W, Wang F, Xin HL, He K, Li J, Dudney N, Meng YS (2016) In situ STEM–EELS observation of nanoscale interfacial phenomena in all-solid-state batteries. Nano Lett 16:3760–3767. https://doi.org/10.1021/acs.nanolett.6b0111910.1021/acs.nanolett.6b01119 ↗

54. Jeong E, Hong C, Tak Y, Nam SC, Cho S (2006) Investigation of interfacial resistance between LiCoO2 cathode and LiPON electrolyte in the thin film battery. J Power Sources 159:223–226. https://doi.org/10.1016/j.jpowsour.2006.04.04210.1016/j.jpowsour.2006.04.042 ↗

55. Kato A, Yamamoto M, Sakuda A, Hayashi A, Tatsumisago M (2018) Mechanical properties of Li2S–P2S5 glasses with lithium halides and application in all-solid-state batteries. ACS Appl Energy Mater 1:1002–1007. https://doi.org/10.1021/acsaem.7b0014010.1021/acsaem.7b00140 ↗

56. Zhang W, Richter FH, Culver SP, Leichtweiss T, Lozano JG, Dietrich C, Bruce PG, Zeier WG, Janek J (2018) Degradation mechanisms at the Li10GeP2S12/LiCoO2 cathode interface in an all-solid-state lithium-ion battery. ACS Appl Mater Interfaces 10:22226–22236. https://doi.org/10.1021/acsami.8b0513210.1021/acsami.8b05132 ↗

57. Cheng Z, Liu M, Ganapathy S, Li C, Li Z, Zhang X, He P, Zhou H, Wagemaker M (2020) Revealing the impact of space-charge layers on the Li-ion transport in all-solid-state batteries. Joule 4:1311–1323. https://doi.org/10.1016/j.joule.2020.04.00210.1016/j.joule.2020.04.002 ↗

58. Kim S, Harada K, Toyama N, Oguchi H, Kisu K, Orimo S-I (2020) Room temperature operation of all-solid-state battery using a closo-type complex hydride solid electrolyte and a LiCoO2 cathode by interfacial modification. J Energy Chem 43:47–51. https://doi.org/10.1016/j.jechem.2019.08.00710.1016/j.jechem.2019.08.007 ↗

59. Takada K, Ohta N, Zhang L, Fukuda K, Sakaguchi I, Ma R, Osada M, Sasaki T (2008) Interfacial modification for high-power solid-state lithium batteries. Solid State Ion 179:1333–1337. https://doi.org/10.1016/j.ssi.2008.02.01710.1016/j.ssi.2008.02.017 ↗

60. Okada K, Machida N, Naito M, Shigematsu T, Ito S, Fujiki S, Nakano M, Aihara Y (2014) Preparation and electrochemical properties of LiAlO2-coated Li(Ni1/3Mn1/3Co1/3)O2 for all-solid-state batteries. Solid State Ion 255:120–127. https://doi.org/10.1016/j.ssi.2013.12.01910.1016/j.ssi.2013.12.019 ↗

61. Sun Z, Lai Y, lv N, Hu Y, Li B, Jing S, Jiang L, Jia M, Li J, Chen S, Liu F (2021) Boosting the electrochemical performance of all-solid-state batteries with sulfide Li6PS5Cl solid electrolyte using Li2WO4-coated LiCoO2 cathode. Adv Mater Interfaces 8, 2100624:1–8. https://doi.org/10.1002/admi.20210062410.1002/admi.202100624 ↗

62. Kim AY, Strauss F, Bartsch T, Teo JH, Hatsukade T, Mazilkin A, Janek J, Hartmann P, Brezesinski T (2019) Stabilizing effect of a hybrid surface coating on a Ni-rich NCM cathode material in all-solid-state batteries. Chem Mater 31:9664–9672. https://doi.org/10.1021/acs.chemmater.9b0294710.1021/acs.chemmater.9b02947 ↗

63. Ito S, Fujiki S, Yamada T, Aihara Y, Park Y, Kim TY, Baek S-W, Lee J-M, Doo S, Machida N (2014) A rocking chair type all-solid-state lithium ion battery adopting Li2O–ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte. J Power Sources 248:943–950. https://doi.org/10.1016/j.jpowsour.2013.10.00510.1016/j.jpowsour.2013.10.005 ↗

64. Shiro Seki YK, Miyashiro H, Mita Y, Iwahori T (2005) Fabrication of high-voltage, high-capacity all-solid-state lithium polymer secondary batteries by application of the polymer electrolyte/inorganic electrolyte composite concept. Chem Mater 17:2041–2045. https://doi.org/10.1021/cm047846c10.1021/cm047846c ↗

65. Wang C-W, Ren F-C, Zhou Y, Yan P-F, Zhou X-D, Zhang S-J, Liu W, Zhang W-D, Zou M-H, Zeng L-Y, Yao X-Y, Huang L, Li J-T, Sun S-G (2021) Engineering the interface between LiCoO2 and Li10GeP2S12 solid electrolytes with an ultrathin Li2CoTi3O8 interlayer to boost the performance of all-solid-state batteries. Energy Environ Sci 14:437–450. https://doi.org/10.1039/d0ee03212c10.1039/d0ee03212c ↗

66. Park KH, Oh DY, Choi YE, Nam YJ, Han L, Kim JY, Xin H, Lin F, Oh SM, Jung YS (2016) Solution-Processable Glass LiI–Li4 SnS4 superionic conductors for all-solid-state Li-ion batteries. Adv Mater 28:1874–1883. https://doi.org/10.1002/adma.20150500810.1002/adma.201505008 ↗

67. Kim DH, Oh DY, Park KH, Choi YE, Nam YJ, Lee HA, Lee SM, Jung YS (2017) Infiltration of solution-processable solid electrolytes into conventional Li-ion-battery electrodes for all-solid-state Li-ion batteries. Nano Lett 17:3013–3020. https://doi.org/10.1021/acs.nanolett.7b0033010.1021/acs.nanolett.7b00330 ↗

68. Dyer LD, Borie BS, Smith GP (1954) Alkali metal-nickel oxides of the type MNiO2. J Am Chem Soc 76:1499–1503. https://doi.org/10.1021/ja01635a01210.1021/ja01635a012 ↗

69. Dahn JR, Von Sacken U, Juzkow MW, Al-Janaby H (1991) Rechargeable LiNiO2/carbon cells. J Eletrochem Soc 138:2207–2211. https://doi.org/10.1002/chin.19914101010.1002/chin.199141010 ↗

70. Liu Z, Yu A, Lee JY (1999) Synthesis and characterization of LiNi1−x−yCoxMnyO2 as the cathode materials of secondary lithium batteries. J Power Sources 81–82:416–419. https://doi.org/10.1016/S0378-7753(99)00221-910.1016/S0378-7753(99)00221-9 ↗

71. Abels G, Bardenhagen I, Schwenzel J, Langer F (2022) Thermal stability of polyethylene oxide electrolytes in lithium nickel manganese cobalt oxide based composite cathodes. J Electrochem Soc 169, 020560:1–7. https://doi.org/10.1149/1945-7111/ac534c10.1149/1945-7111/ac534c ↗

72. Miyashiro H, Seki S, Kobayashi Y, Ohno Y, Mita Y, Usami A (2005) All-solid-state lithium polymer secondary battery with LiNi0.5Mn1.5O4 by mixing of Li3PO4. Electrochem Commun 7:1083–1086. https://doi.org/10.1016/j.elecom.2005.08.00610.1016/j.elecom.2005.08.006 ↗

73. Liang J, Hwang S, Li S, Luo J, Sun Y, Zhao Y, Sun Q, Li W, Li M, Banis MN, Li X, Li R, Zhang L, Zhao S, Lu S, Huang H, Su D, Sun X (2020) Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries. Nano Energy 78, 105107:1–25. https://doi.org/10.1016/j.nanoen.2020.10510710.1016/j.nanoen.2020.105107 ↗

74. Li Q, Zhang X, Peng J, Wang Z, Rao Z, Li Y, Li Z, Fang C, Han J, Huang Y (2022) Engineering a high-voltage durable cathode/electrolyte interface for all-solid-state lithium metal batteries via In situ electropolymerization. ACS Appl Mater Interfaces 14:21018–21027. https://doi.org/10.1021/acsami.2c0273110.1021/acsami.2c02731 ↗

75. Wang X, Song Y, Jiang X, Liu Q, Dong J, Wang J, Zhou X, Li B, Yin G, Jiang Z, Wang J (2022) Constructing interfacial nanolayer stabilizes 4.3 V high-voltage all-solid-state lithium batteries with PEO-based solid-state electrolyte. Adv Funct Mater 32, 2113068:1–10. https://doi.org/10.1002/adfm.20211306810.1002/adfm.202113068 ↗

76. Shen J, Lei Z, Wang C (2022) An ion conducting ZIF-8 coating protected PEO based polymer electrolyte for high voltage lithium metal batteries. Chem Eng J 447,137503:1–7. https://doi.org/10.1016/j.cej.2022.13750310.1016/j.cej.2022.137503 ↗

77. Wang L, Zhang X, Wang T, Yin Y, Shi J, Wang C, Guo Y (2018) Ameliorating the interfacial problems of cathode and solid-state electrolytes by interface modification of functional polymers. Adv Energy Mater 8, 18001528:1–8. https://doi.org/10.1002/aenm.20180152810.1002/aenm.201801528 ↗

78. Guo Q, Zheng J, Zhu Y, Jiang H, Jiang H, Wang H, Sun W, Sang H, Han Y, Zheng C, Xie K (2022) Design of a fast ion-transport interlayer on cathode-electrolyte interface for solid-state lithium metal batteries. Energy Storage Mater 48:205–211. https://doi.org/10.1016/j.ensm.2022.03.01610.1016/j.ensm.2022.03.016 ↗

79. He F, Tang W, Zhang X, Deng L, Luo J (2021) High energy density solid state lithium metal batteries enabled by sub-5 microm solid polymer electrolytes. Adv Mater 33, e2105329:1–9. https://doi.org/10.1002/adma.20210532910.1002/adma.202105329 ↗

80. Lu Y, Zhang X, Xue C, Xin C, Li M, Nan C-W, Shen Y (2020) Three-dimensional structured asymmetric electrolytes for high interface stability and fast Li-ion transport in solid-state Li-metal batteries. Mater Today Energy 18, 100522:1–8. https://doi.org/10.1016/j.mtener.2020.10052210.1016/j.mtener.2020.100522 ↗

81. Wang G, He P, Fan LZ (2020) Asymmetric polymer electrolyte constructed by metal-organic framework for solid-state dendrite-free lithium metal battery. Adv Funct Mater 31, 2007198:1–9. https://doi.org/10.1002/adfm.20200719810.1002/adfm.202007198 ↗

82. Duan H, Fan M, Chen WP, Li JY, Wang PF, Wang WP, Shi JL, Yin YX, Wan LJ, Guo YG (2019) Extended electrochemical window of solid electrolytes via heterogeneous multilayered structure for high-voltage lithium metal batteries. Adv Mater 31, e1807789:1–7. https://doi.org/10.1002/adma.20180778910.1002/adma.201807789 ↗

83. Wen K, Tan X, Chen T, Chen S, Zhang S (2020) Fast Li-ion transport and uniform Li-ion flux enabled by a double–layered polymer electrolyte for high performance Li metal battery. Energy Storage Mater 32:55–64. https://doi.org/10.1016/j.ensm.2020.07.03710.1016/j.ensm.2020.07.037 ↗

84. Liu F, Cheng Y, Zuo X, Chen R, Zhang J, Mai L, Xu L (2022) Gradient trilayer solid-state electrolyte with excellent interface compatibility for high-voltage lithium batteries. Chem Eng J 441, 136077:1–7. https://doi.org/10.1016/j.cej.2022.13607710.1016/j.cej.2022.136077 ↗

85. Koerver R, Zhang W, de Biasi L, Schweidler S, Kondrakov AO, Kolling S, Brezesinski T, Hartmann P, Zeier WG, Janek J (2018) Chemo-mechanical expansion of lithium electrode materials—on the route to mechanically optimized all-solid-state batteries. Energy Environ Sci 11:2142–2158. https://doi.org/10.1039/c8ee00907d10.1039/c8ee00907d ↗

86. Zhu Y, He X, Mo Y (2016) First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries. J Mater Chem A 4:3253–3266. https://doi.org/10.1039/c5ta08574h10.1039/c5ta08574h ↗

87. Nolan AM, Wachsman ED, Mo Y (2021) Computation-guided discovery of coating materials to stabilize the interface between lithium garnet solid electrolyte and high-energy cathodes for all-solid-state lithium batteries. Energy Storage Mater 41:571–580. https://doi.org/10.1016/j.ensm.2021.06.02710.1016/j.ensm.2021.06.027 ↗

88. Zhang N, Long X, Wang Z, Yu P, Han F, Fu J, Ren G, Wu Y, Zheng S, Huang W, Wang C, Li H, Liu X (2018) Mechanism study on the interfacial stability of a lithium garnet-type oxide electrolyte against cathode materials. ACS Appl Energy Mater 1:5968–5976. https://doi.org/10.1021/acsaem.8b0103510.1021/acsaem.8b01035 ↗

89. Alexander GV, Rosero-Navarro NC, Miura A, Tadanaga K, Murugan R (2018) Electrochemical performance of a garnet solid electrolyte based lithium metal battery with interface modification. J Mater Chem A 6:21018–21028. https://doi.org/10.1039/c8ta07652a10.1039/c8ta07652a ↗

90. Zhao Z, Wen Z, Liu X, Yang H, Chen S, Li C, Lv H, Wu F, Wu B, Mu D (2021) Tuning a compatible interface with LLZTO integrated on cathode material for improving NCM811/LLZTO solid-state battery. Chem Eng J 405, 127031:1–9. https://doi.org/10.1016/j.cej.2020.12703110.1016/j.cej.2020.127031 ↗

91. Liu T, Zhang Y, Zhang X, Wang L, Zhao S-X, Lin Y-H, Shen Y, Luo J, Li L, Nan C-W (2018) Enhanced electrochemical performance of bulk type oxide ceramic lithium batteries enabled by interface modification. J Mater Chem A 6:4649–4657. https://doi.org/10.1039/c7ta06833f10.1039/c7ta06833f ↗

92. Malaki M, Pokle A, Otto S-K, Henss A, Beaupain JP, Beyer A, Müller J, Butz B, Wätzig K, Kusnezoff M, Janek J, Volz K (2022) Advanced analytical characterization of interface degradation in Ni-rich NCM cathode co-sintered with LATP solid electrolyte. ACS Appl Energy Mater 5:4651–4663. https://doi.org/10.1021/acsaem.2c0008410.1021/acsaem.2c00084 ↗

93. Liang JY, Zeng XX, Zhang XD, Wang PF, Ma JY, Yin YX, Wu XW, Guo YG, Wan LJ (2018) Mitigating interfacial potential drop of cathode-solid electrolyte via ionic conductor layer to enhance interface dynamics for solid batteries. J Am Chem Soc 140:6767–6770. https://doi.org/10.1021/jacs.8b0331910.1021/jacs.8b03319 ↗

94. Zhu Y, He X, Mo Y (2015) Origin of outstanding stability in the lithium solid electrolyte materials: insights from thermodynamic analyses based on first-principles calculations. ACS Appl Mater Interfaces 7:23685–23693. https://doi.org/10.1021/acsami.5b0751710.1021/acsami.5b07517 ↗

95. Richards WD, Miara LJ, Wang Y, Kim JC, Ceder G (2015) Interface stability in solid-state batteries. Chem of Mater 28:266–273. https://doi.org/10.1021/acs.chemmater.5b0408210.1021/acs.chemmater.5b04082 ↗

96. Hakari T, Deguchi M, Mitsuhara K, Ohta T, Saito K, Orikasa Y, Uchimoto Y, Kowada Y, Hayashi A, Tatsumisago M (2017) Structural and electronic state changes of a sulfide solid electrolyte during the Li deinsertion/insertion processes. Chem Mater 29:4768–4774. https://doi.org/10.1021/acs.chemmater.7b0055110.1021/acs.chemmater.7b00551 ↗

97. Auvergniot J, Cassel A, Foix D, Viallet V, Seznec V, Dedryvère R (2017) Redox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: an XPS study. Solid State Ion 300:78–85. https://doi.org/10.1016/j.ssi.2016.11.02910.1016/j.ssi.2016.11.029 ↗

98. Li X, Guan H, Ma Z, Liang M, Song D, Zhang H, Shi X, Li C, Jiao L, Zhang L (2020) In/ex-situ Raman spectra combined with EIS for observing interface reactions between Ni-rich layered oxide cathode and sulfide electrolyte. J Energy Chem 48:195–202. https://doi.org/10.1016/j.jechem.2020.01.02110.1016/j.jechem.2020.01.021 ↗

99. Jiang W, Zhu X, Huang R, Zhao S, Fan X, Ling M, Liang C, Wang L (2022) Revealing the design principles of Ni-rich cathodes for all-solid-state batteries. Adv Energy Mater 12, 2103473:1–9. https://doi.org/10.1002/aenm.20210347310.1002/aenm.202103473 ↗

100. Jung SH, Kim UH, Kim JH, Jun S, Yoon CS, Jung YS, Sun YK (2019) Ni-rich layered cathode materials with electrochemo-mechanically compliant microstructures for all-solid-state Li batteries. Adv Energy Mater 10, 1903360:1–12. https://doi.org/10.1002/aenm.20190336010.1002/aenm.201903360 ↗