Effect of rotating laser welding on microstructure and mechanical properties of Ti6Al4V alloy butt-welded joint
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Zhang W, Xu J (2022) Advanced lightweight materials for automobiles: a review. Mater Des 221:110994. https://doi.org/10.1016/j.matdes.2022.11099410.1016/j.matdes.2022.110994 ↗
2. Zhou Y, Chen K, Ferreirós PA, Gao D, Song M, Shen Z, Que Z, Yu J, Zhang L, Zeng X (2025) Printed cellular structure enhancing re-passivation of stress corrosion cracking in high-temperature water. Corros Sci 244:112636. https://doi.org/10.1016/j.corsci.2024.11263610.1016/j.corsci.2024.112636 ↗
3. Wang Z, Shen Z, Liu Y, Zhao Y, Zhu Q, Chen Y, Wang J, Li Y, Lozano-Perez S, Zeng X (2024) The effect of LPSO phase on the high-temperature oxidation of a stainless Mg-Y-Al alloy. J Magnes Alloy 12(10):4045–4052. https://doi.org/10.1016/j.jma.2024.07.00910.1016/j.jma.2024.07.009 ↗
4. Sheng L, Xiao Y, Jiao C, Du B, Li Y, Wu Z, Shao L (2021) Influence of layer number on microstructure, mechanical properties and wear behavior of the TiN/Ti multilayer coatings fabricated by high-power magnetron sputtering deposition. J Manuf Process 70:529–542. https://doi.org/10.1016/j.jmapro.2021.09.00210.1016/j.jmapro.2021.09.002 ↗
5. Li W, Cao C, Yin S (2020) Solid-state cold spraying of Ti and its alloys: a literature review. Prog Mater Sci 110:100633. https://doi.org/10.1016/j.pmatsci.2019.10063310.1016/j.pmatsci.2019.100633 ↗
6. Chao Y, Liu Y, Xu Z, Xie W, Zhang L, Ouyang W, Wu H, Pan Z, Jiao J, Li S, Zhang G, Zhang W, Sheng L (2023) Improving superficial microstructure and properties of the laser-processed ultrathin kerf in Ti-6Al-4V alloy by waterjet guiding. J Mater Sci Technol 156:32–53. https://doi.org/10.1016/j.jmst.2022.11.05810.1016/j.jmst.2022.11.058 ↗
7. Junet A, Messager A, Weck A, Nadot Y, Boulnat X, Buffiere J (2023) Internal fatigue crack propagation in a Ti-6Al-4V alloy: An insitu study. Int J Fatigue 168:107450. https://doi.org/10.1016/j.ijfatigue.2022.10745010.1016/j.ijfatigue.2022.107450 ↗
8. Kimura M, Ohara K, Kusaka M, Kaizu K, Hayashid K (2020) Effects of tensile strength on friction welding condition and weld faying surface properties of friction welded joints between pure copper and austenitic stainless steel. J Adv Join Process 2:100028. https://doi.org/10.1016/j.jajp.2020.10002810.1016/j.jajp.2020.100028 ↗
9. Carvalho GHSFL, Galvão I, Mendes R, Leal RM, Loureiro A (2020) Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers. J Mater Process Tech 283:116707. https://doi.org/10.1016/j.jmatprotec.2020.11670710.1016/j.jmatprotec.2020.116707 ↗
10. Eftekhar A, Sadrossadat S, Reihanian M (2022) Effect of heat input on microstructure and mechanical properties of TIG-welded semisolid cast AXE622 Mg alloy. Mater Charact 184:111692. https://doi.org/10.1016/j.matchar.2021.11169210.1016/j.matchar.2021.111692 ↗
11. Prasad R, Waghmare DT, Kumar K, Masanta M (2020) Effect of overlapping condition on large area NiTi layer deposited on Ti-6Al-4V alloy by TIG cladding technique. Surf Coat Tech 385:125417. https://doi.org/10.1016/j.surfcoat.2020.12541710.1016/j.surfcoat.2020.125417 ↗
12. Tsai CJ, Wang L (2014) Improved mechanical properties of Ti–6Al–4V alloy by electron beam welding process plus annealing treatments and its microstructural evolution. Mater Des 60:587–598. https://doi.org/10.1016/j.matdes.2014.04.03710.1016/j.matdes.2014.04.037 ↗
13. Gao D, Shen Z, Chen K, Zhou X, Liu H, Wang J, Li Y, Liu Z, Deng H, Wang WY (2024) Review of progress in calculation and simulation of high-temperature oxidation. Prog Mater Sci 147:101348. https://doi.org/10.1016/j.pmatsci.2024.10134810.1016/j.pmatsci.2024.101348 ↗
14. Zhao C, Wen M, Wang Q, Ouyang W, Xu, D, Jia Z, Zheng Y, Xi T, Sheng L (2025). Tailoring the corrosion resistance and biological performance of Mg-Zn-Y-Nd bioimplants with multiphasic, pore-sealed cerium-doped ceramic coatings via facile one-pot plasma electrolytic oxidation. J Mater Sci Technol https://doi.org/10.1016/j.jmst.2025.01.01610.1016/j.jmst.2025.01.016 ↗
15. Harkin R, Wu H, Nikam S, Yin S, Lupoi R, McKay W, Walls P, Quinn J, McFadden S (2022) Powder Reuse in Laser-Based Powder Bed Fusion of Ti6Al4V—Changes in Mechanical Properties during a Powder Top-Up Regime. Materials 15:2238. https://doi.org/10.3390/ma1506223810.3390/ma15062238 ↗
16. Ouyang W, Xu Z, Chao Y, Liu Y, Luo W, Jiao J, Sheng L, Zhang W (2022) Effect of electrostatic field on microstructure and mechanical properties of the 316L stainless steel modified layer fabricated by laser cladding. Mater Charact 191:112113. https://doi.org/10.1016/j.matchar.2022.11212310.1016/j.matchar.2022.112123 ↗
17. Sheng L, Cheng X, Jiang S, Zhao C, Liu J, Jing C, Wang J, Xu L, Xiao Y, Wang B, Jiao J (2025) Investigation on cutting of CFRP composite by nanosecond short-pulsed laser with rotary drilling method. Sci Eng Compos Mater 32(1):2024–0047. https://doi.org/10.1515/secm-2024-004710.1515/secm-2024-0047 ↗
18. Cao X, Jahazi M (2009) Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser. Opt Laser Eng 47:1231–1241. https://doi.org/10.1016/j.optlaseng.2009.05.01010.1016/j.optlaseng.2009.05.010 ↗
19. Mukherjee T, Gao M, Palmer T, DebRoy T (2023) Keyhole mode wobble laser welding of a nickel base superalloy - modeling, experiments, and process maps. J Manuf Process 106:465–479. https://doi.org/10.1016/j.jmapro.2023.10.01710.1016/j.jmapro.2023.10.017 ↗
20. Ahn J, Chen L, Davies CM, Dear JP (2016) Parametric optimisation and microstructural analysis on high power Yb-fibre laser welding of Ti–6Al–4V. Opt Laser Eng 86:156–171. https://doi.org/10.1016/j.optlaseng.2016.06.00210.1016/j.optlaseng.2016.06.002 ↗
21. Ju J, Yu H, Zhao Y, Yang T, Xiao B, Peng P, Wang R, Wang H, Zeng X, Wang J (2024) Understanding the oxidation behaviors of a Ni-Co-based superalloy at elevated temperatures through multiscale characterization. Corros Sci 227:111800. https://doi.org/10.1016/j.corsci.2023.11180010.1016/j.corsci.2023.111800 ↗
22. Boccarusso L, Arleo G, Astarita A, Bernardo F, Fazio P, Durante M, Minutolo F, Sepe R, Squillace A (2017) A new approach to study the influence of the weld bead morphology on the fatigue behaviour of Ti–6Al–4V laser beam-welded butt joints. Int J Adv Manuf Technol 88:75–88. https://doi.org/10.1007/s00170-016-8764-410.1007/s00170-016-8764-4 ↗
23. Examilioti T, Papanikos P, Kashaev N, Klusemann B, Alexopoulos N (2022) Experimental and numerical investigation of laser beam-welded Al–Cu–Li joints using micro-mechanical characteristics. J Mater Res Technol 19:2431–2446. https://doi.org/10.1016/j.jmrt.2022.05.19710.1016/j.jmrt.2022.05.197 ↗
24. Zhang L, Ouyang W, Wu D, Sheng L, Guo C, Ma L, Chen Z, Zhu Z, Du Y, Cui P, Hou Z, Zhang W (2023) Effect of synchronized laser shock peening on decreasing defects and improving microstructures of Ti-6Al-4V laser joint. Materials 16:4570. https://doi.org/10.3390/ma1613457010.3390/ma16134570 ↗
25. Wang Z, Oliveira JP, Zeng Zhi BuXZ, Peng B, Shao XY (2019) Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties. Opt Laser Technol 111:58–65. https://doi.org/10.1016/j.optlastec.2018.09.03610.1016/j.optlastec.2018.09.036 ↗
26. Ke W, Bu X, Oliveira JP, Xu W, Wang Z, Zeng Z (2021) Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy. Opt Laser Technol 133:106540. https://doi.org/10.1016/j.optlastec.2020.10654010.1016/j.optlastec.2020.106540 ↗
27. Cai C, Yu J, Chen Z, Li Z, Chen H, Tang P, Xiong F (2025) Welding process stability in narrow-gap oscillating laser-MIG hybrid welding of titanium alloys with various oscillating patterns. J Manuf Process 133:151–162. https://doi.org/10.1016/j.jmapro.2024.11.03610.1016/j.jmapro.2024.11.036 ↗
28. Dai G, Sun Z, Li Y, Jain J, Bhowmik A, Shinjo J, Lu J, Panwisawas C (2023) Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations. Int J Mach Tool Manu 189:104031. https://doi.org/10.1016/j.ijmachtools.2023.10403110.1016/j.ijmachtools.2023.104031 ↗
29. Meng X, Bachmann M, Artinov A, Rethmeier M (2019) Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring. J Manuf Process 45:408–418. https://doi.org/10.1016/j.jmapro.2019.07.02110.1016/j.jmapro.2019.07.021 ↗
30. Zhang K, Li Y, Yang Y (2020) Influence of the low voltage pulsed magnetic field on the columnar-to-equiaxed transition during directional solidification of superalloy K4169. J Mater Sci Technol 48:9–17. https://doi.org/10.1016/j.jmst.2020.02.00910.1016/j.jmst.2020.02.009 ↗
31. Sheng LY, Guo JT, Tian YX, Zhou LZ, Ye HQ (2009) Microstructure and mechanical properties of rapidly solidified NiAl–Cr(Mo) eutectic alloy doped with trace Dy. J Alloy Compd 475(1–2):730–734. https://doi.org/10.1016/j.jallcom.2008.07.10910.1016/j.jallcom.2008.07.109 ↗
32. Wang C, Wu J, Liu Y, Xu D, Liu Y, Li S, Hou W, Wang J, Chen X, Sheng L, Lin H (2023) Improving osteoinduction and osteogenesis of Ti6Al4V alloy porous scaffold by regulating the pore structure. Front Chem 11:1190630. https://doi.org/10.3389/fchem.2023.119063010.3389/fchem.2023.1190630 ↗
33. Xiao X, Xu H, Sheng LY, Zhou LZ (2012) The hot deformation behavior and microstructural evolution of Ti-6Al-2Zr-3Ni alloy. Adv Mat Res 452–453:61–65. https://doi.org/10.4028/www.scientific.net/AMR.452-453.6110.4028/www.scientific.net/AMR.452-453.61 ↗
34. Babu N, Raman S, Murthy C, Reddy G (2007) Effect of beam oscillation on fatigue life of Ti-6Al-4V electron beam weldments. Mater Sci Eng A 471:113–119. https://doi.org/10.1016/j.msea.2007.03.04010.1016/j.msea.2007.03.040 ↗
35. Thomas G, Ramachandra V, Ganeshan R, Vasudevan R (1993) Effect of pre- and post-weld heat treatments on the mechanical properties of electron beam welded Ti-6Al-4V alloy. J Mater Sci Technol 28:4892–4899. https://doi.org/10.1007/BF0036115210.1007/BF00361152 ↗
36. Logesh M, Selvabharathi R, Thangeeswari T, Palani S (2020) Influence of severe double shot peening on microstructure properties of Ti 6Al-4V and titanium grade 2 dissimilar joints using laser beam welding. Opt Laser Technol 123:105883. https://doi.org/10.1016/j.optlastec.2019.10588310.1016/j.optlastec.2019.105883 ↗
37. Chattopadhyay A, Muvvala G, Sarkar S, Racherla V, Nath A (2021) Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium. Opt Laser Technol 133:106527. https://doi.org/10.1016/j.optlastec.2020.10652710.1016/j.optlastec.2020.106527 ↗
38. Ma T, Li W, Zhong B, Zhang Y, Li L (2012) Effect of post-weld heat treatment on microstructure and property of linear friction welded Ti17 titanium alloy joint. Sci Technol Weld Joi 17(3):180–185. https://doi.org/10.1179/1362171811Y.000000007910.1179/1362171811Y.0000000079 ↗
39. Chen X, Xie F, Ma T, Li W, Wu X (2016) Effects of post-weld heat treatment on microstructure and mechanical properties of linear friction welded Ti2AlNb alloy. Mater Design 94:45–53. https://doi.org/10.1016/j.matdes.2016.01.01710.1016/j.matdes.2016.01.017 ↗
40. Zhao H, Zhao C, Xie W, Wu D, Du B, Zhang X, Wen M, Ma R, Li R, Jiao J, Chang C, Yan X, Sheng L (2023) Research progress of laser cladding on the surface of titanium and its alloys. Materials 16:3250. https://doi.org/10.3390/ma1608325010.3390/ma16083250 ↗
41. Zhang L, Ouyang W, Wu H, Qin X, Zhang S, Xie W, Jiang S, Zhang W, Sheng L (2024) Microstructure and high-temperature tribological properties of Ti–6Al–4V alloy treated by laser shock peening. J Mater Res Technol 29:4129–4145. https://doi.org/10.1016/j.jmrt.2024.02.13210.1016/j.jmrt.2024.02.132 ↗
42. Zhao Y, Bai Y, Yang J, Shen Y, Lou Y, Zhang K, Wu Y, Li Y, Li J, Cui Z, Wei T, Ma S, Shen Z, Wang H, Zeng X (2024) Autoclave grid-to-rod fretting wear behaviors of the Zr alloy fuel cladding with and without Cr coating through advanced characterization. Corros Sci 239:112379. https://doi.org/10.1016/j.corsci.2024.11237910.1016/j.corsci.2024.112379 ↗
43. Ouyang W, Zhang L, Wu H, Wu D, Zhang S, Qin X, Jiang S, Li S, Zhang W, Sheng L (2024) Optimized mechanical properties of the hot forged Ti–6Al–4V alloy by regulating multiscale microstructure via laser shock peening. Int J Mach Tools Manuf 201:104192. https://doi.org/10.1016/j.ijmachtools.2024.10419210.1016/j.ijmachtools.2024.104192 ↗
44. Sheng L, Yang Y, Lai C, Chen X, Xi T (2019) Microstructure evolution of a Ti–Al–Sn–Zr based alloy during the hot compression deformation. Mater Express 9:1127. https://doi.org/10.1166/mex.2019.159910.1166/mex.2019.1599 ↗
45. Zhang W, Xing L, Zhang S, Wang K, Chen J, Chen J, Fang G, Liu W (2024) The reverse transformation mechanism of β phase and its stability of Ti-6Al-4V alloy fabricated via laser powder bed fusion. Mater Des 241:112926. https://doi.org/10.1016/j.matdes.2024.11292610.1016/j.matdes.2024.112926 ↗
46. Zhang LN, Zhao HQ, Sheng LY, Zhou LZ (2012) Study on the transformation of (α+ β) phase to β phase in deformed Ti-6Al-4V alloy during the heat treatment. Adv Mat Res 454:97–100. https://doi.org/10.4028/www.scientific.net/AMR.454.9710.4028/www.scientific.net/AMR.454.97 ↗
47. Fleming T, Clark S, Fan X, Fezzaa K, Leung C, Lee P, Fraser J (2023) Synchrotron validation of inline coherent imaging for tracking laser keyhole depth. Addit Manuf 77:103798. https://doi.org/10.1016/j.addma.2023.10379810.1016/j.addma.2023.103798 ↗
48. Bayat M, Nadimpalli V, Pedersen D, Hattel JA (2021) Fundamental investigation of thermo-capillarity in laser powder bed fu-sion of metals and alloys. Int J Heat Mass Tran 166:120766. https://doi.org/10.1016/j.ijheatmasstransfer.2020.12076610.1016/j.ijheatmasstransfer.2020.120766 ↗
49. Chen J, Wei Y, Zhan X, Gao Q, Zhang D, Gao X (2018) Influence of magnetic field orientation on molten pool dynamics during magnet-assisted laser butt welding of thick aluminum alloy plates. Opt Laser Technol 104:148–158. https://doi.org/10.1016/j.optlastec.2018.02.02010.1016/j.optlastec.2018.02.020 ↗
50. Hu Y, Wang L, Yao J, Xia H, Li J, Liu R (2020) Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding. Surf Coat Tech 383:125198. https://doi.org/10.1016/j.surfcoat.2019.12519810.1016/j.surfcoat.2019.125198 ↗
51. Leung C, Marussi S, Towrie M, Atwood R, Withers P, Lee P (2019) The effect of powder oxidation on defect formation in laser additive manufacturing. Acta Mater 166:294–305. https://doi.org/10.1016/j.actamat.2018.12.02710.1016/j.actamat.2018.12.027 ↗
52. Kim C, Kim J, Hong H, Lee W, Kim S, Cho Y (2021) Behavior of weld pool convection and columnar-to-equiaxed grain tran-sition in gas tungsten arc welds of ferritic stainless steels with different aluminum contents. J Mater Process Tech 289:116946. https://doi.org/10.1016/j.jmatprotec.2020.11694610.1016/j.jmatprotec.2020.116946 ↗
53. Nguyen H, Van Nguyen A, Duy H, Nguyen T, Tashiro S, Tanaka M (2021) Relationship among welding defects with con-vection and material flow dynamic considering principal forces in plasma arc welding. Metals 11:1444. https://doi.org/10.3390/met1109144410.3390/met11091444 ↗
54. Shu X, Liang X, Liu J, Wen Q, Long W (2024) Severe plastic deformation-induced rapid diffusion behavior at the Al/steel in-terface. Mater Lett 354:135328. https://doi.org/10.1016/j.matlet.2023.13532810.1016/j.matlet.2023.135328 ↗
55. Lorenzin G, Hoque M, Ariosa D, Jeurgens L, Hoglund E, Tomko J, Hopkins P, Cancellieri C (2022) Tensile and compressive stresses in Cu/W multilayers: correlation with microstructure, thermal stability, and thermal conductivity. Acta Mater 240:118315. https://doi.org/10.1016/j.actamat.2022.11831510.1016/j.actamat.2022.118315 ↗
56. Herault Q, Gozhyk I, Balestrieri M, Montigaud H, Grachev S, Lazzari R (2021) Kinetics and mechanisms of stress relaxation in sputtered silver thin films. Acta Mater 221:117385. https://doi.org/10.1016/j.actamat.2021.11738510.1016/j.actamat.2021.117385 ↗
57. Wang Q, Wang L, Yang F, Wang J, Sheng L (2024) Effect of Ti addition and electric field on microstructure and mechanical properties of the Al-Si-Fe hypereutectic alloy. Strength Mater 56:375–385. https://doi.org/10.1007/s11223-024-00656-210.1007/s11223-024-00656-2 ↗