Effect of Cl−, SO42−, and pH on the corrosion behavior and depassivation mechanism of Q355B steel in simulated concrete pore solution
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Liu Y, Miao Z, Yuan H, Geng X, Hogan L, Zhu M (2024) Experimental study of tensile behaviour of rebars with simulated pitting corrosion. Constr Build Mater 445:13795210.1016/j.conbuildmat.2024.137952 ↗
2. Jin Z, Xiong C, Zhao T, Du Y, Zhang X, Li N, Wang P (2022) Passivation and depassivation properties of Cr–Mo alloyed corrosion-resistant steel in simulated concrete pore solution. Cem Concr Compos 126:10437510.1016/j.cemconcomp.2021.104375 ↗
3. Vu TH, Dang LC, Kang G, Sirivivatnanon V (2022) Chloride induced corrosion of steel reinforcement in alkali activated slag concretes: a critical review. Case Stud Constr Mater 16:e01112
4. Wang Y, Chen R, Hu J, Zhang Z, Huang H, Ma Y, Yu Q (2021) Surface characteristics and electrochemical behaviors of passive reinforcing steel in alkali-activated slag. Corros Sci 190:10965710.1016/j.corsci.2021.109657 ↗
5. Ogunsanya IG, Hansson CM (2019) The semiconductor properties of passive films and corrosion behavior of stainless steel reinforcing bars in simulated concrete pore solution. Materialia 6:10032110.1016/j.mtla.2019.100321 ↗
6. Generous MM, Qasem NA, Zubair SM (2020) The significance of modeling electrodialysis desalination using multi-component saline water. Desalination 496:11434710.1016/j.desal.2020.114347 ↗
7. Liu C, Mao F, Wang J, Li B (2024) Combined effect of chloride and sulfate ions on the corrosion behavior of Q355B steel in simulated concrete pore solution. Mater Today Commun 40:10970310.1016/j.mtcomm.2024.109703 ↗
8. Xu J, Tan Q, Mei Y (2020) Corrosion protection of steel by Mg-Al layered double hydroxides in simulated concrete pore solution: effect of SO42. Corros Sci 163:10822310.1016/j.corsci.2019.108223 ↗
9. Jiang H, Jin Z, Chen Y, Liu Y, Zhang X (2024) The influence of passivation temperature on the corrosion resistance of passivation film for Q235 steel in simulated pore solution of concrete with chloride or/and sulfate ions. J Sustain Cem Based Mater 13(9):1362–1375
10. ALAmeeri AS, Rafiq MI, Tsioulou O (2021) Combined impact of carbonation and crack width on the chloride penetration and corrosion resistance of concrete structures. Cement and Concrete Composites, 115, 103819.10.1016/j.cemconcomp.2020.103819 ↗
11. Abd El Haleem SM, Abd El Wanees S, Bahgat A (2013) Environmental factors affecting the corrosion behaviour of reinforcing steel. V. role of chloride and sulphate ions in the corrosion of reinforcing steel in saturated Ca (OH) 2 solutions. Corros Sci 75:1–1510.1016/j.corsci.2013.04.049 ↗
12. Bahraq AA, Obot IB, Al-Osta MA, Ibrahim M (2024) Molecular simulations of anticorrosion behavior of inhibitors for steel in concrete: a review on recent advances and progress. Constr Build Mater 412:13480810.1016/j.conbuildmat.2023.134808 ↗
13. Mammoliti L, Hansson CM (2005) Influence of cation on corrosion behavior of reinforcing steel in high-pH sulfate solutions. ACI Mater J 102(4):279
14. Ogunsanya IG, Hansson CM (2019) Influence of chloride and sulphate anions on the electronic and electrochemical properties of passive films formed on steel reinforcing bars. Materialia 8:10049110.1016/j.mtla.2019.100491 ↗
15. Krishna Vigneshwaran KK, Permeh S, Echeverría M, Lau K, Lasa I (2018) Corrosion of post-tensioned tendons with deficient grout, part 1: electrochemical behavior of steel in alkaline sulfate solutions. Corrosion 74(3):362–37110.5006/2541 ↗
16. Song Q, Nie J, Wu D, Hu Y, Chen Y (2021) Effect of SO42−, Cl− and Mg2+ on the system of CSH and Ca (OH)2. Constr Build Mater 285:12295510.1016/j.conbuildmat.2021.122955 ↗
17. Permeh S, Krishna Vigneshwaran KK, Lau K, Lasa I (2019) Corrosion of post-tensioned tendons with deficient grout, part 3: segregated grout with elevated sulfate and vestigial chloride content. Corrosion 75(7):848–86410.5006/3097 ↗
18. Al-Tayyib AJ, Somuah SK, Boah JK, Leblanc P, Al-Mana AI (1988) Laboratory study on the effect of sulfate ions on rebar corrosion. Cem Concr Res 18(5):774–78210.1016/0008-8846(88)90102-0 ↗
19. Al-Tayyib AJ, Khan MS (1991) Effect of sulfate ions on the corrosion of rebars embedded in concrete. Cem Concr Compos 13(2):123–12710.1016/0958-9465(91)90007-5 ↗
20. Shaheen F, Pradhan B (2017) Influence of sulfate ion and associated cation type on steel reinforcement corrosion in concrete powder aqueous solution in the presence of chloride ions. Cem Concr Res 91:73–8610.1016/j.cemconres.2016.10.008 ↗
21. Shaheen F, Pradhan B (2015) Effect of chloride and conjoint chloride–sulfate ions on corrosion of reinforcing steel in electrolytic concrete powder solution (ECPS). Constr Build Mater 101:99–11210.1016/j.conbuildmat.2015.10.028 ↗
22. Yang L, Yunze X, Zhu Y, Liu L, Wang X, Huang Y (2016) Evaluation of interaction effect of sulfate and chloride ions on reinforcements in simulated marine environment using electrochemical methods. Int J Electrochem Sci 11(8):6943–6958. https://doi.org/10.20964/2016.08.5110.20964/2016.08.51 ↗
23. Jon Williamson O, Isgor B (2016) The effect of simulated concrete pore solution composition and chlorides on the electronic properties of passive films on carbon steel rebar. Corros Sci 106:82–95. https://doi.org/10.1016/j.corsci.2016.01.02710.1016/j.corsci.2016.01.027 ↗
24. Pan D, Niu D, Luo D, Li Z (2024) Passivation behavior of low-alloy steel reinforcement embedded in seawater sea-sand concrete. Constr Build Mater 435:13666910.1016/j.conbuildmat.2024.136669 ↗
25. Gong K, Liu C, Yang M, Mao F, Wang J, Shen X, Li M (2023) Effect of multivariable interaction on the corrosion behavior of Q355B steel in simulated concrete pore solutions. Constr Build Mater 409:13406010.1016/j.conbuildmat.2023.134060 ↗
26. Gong K, Yang M, Liu C, Shen X, Xiao L, Li M, Mao F (2023) Synergistic effect of chloride ions and surface film on depassivation mechanism of Q355B steel in simulated concrete pore solution. J Build Eng 78:10774210.1016/j.jobe.2023.107742 ↗
27. Zhang L, Niu D, Wen B, Peng G, Sun Z (2020) Corrosion behavior of low alloy steel bars containing Cr and Al in coral concrete for ocean construction. Constr Build Mater 258:11956410.1016/j.conbuildmat.2020.119564 ↗
28. G Astm (2004) G102–89.
29. E ISO (2012) The British Standard Institute.
30. Jin Z, Zhao X, Du Y, Yang S, Wang D, Zhao T, Bai Y (2022) Comprehensive properties of passive film formed in simulated pore solution of alkali-activated concrete. Constr Build Mater 319:12614210.1016/j.conbuildmat.2021.126142 ↗
31. Xing H, Min D, Huang G, Ma L (2023) Acceleration of pitting corrosion of 70Cu–30Ni alloy in seawater by NH4+ and stress. J Mater Res Technol 23:221–237. https://doi.org/10.1016/j.jmrt.2022.12.18410.1016/j.jmrt.2022.12.184 ↗
32. Xia J, Zhu G, Gao X, Wang S, Chang Z, Guo N, Li X (2024) Research on surface energy and corrosion resistance by electrochemical processing of 304-Cu stainless steel. Mater Today Commun 39:10884710.1016/j.mtcomm.2024.108847 ↗
33. Song Z, Zhang Y, Liu L, Pu Q, Jiang L, Chu H, Cai H (2021) Use of XPS for quantitative evaluation of tensile-stress-induced degradation of passive film on carbon steel in simulated concrete pore solution. Constr Build Mater 274:12177910.1016/j.conbuildmat.2020.121779 ↗
34. Sahoo G, Balasubramaniam R (2008) On the corrosion behaviour of phosphoric irons in simulated concrete pore solution. Corros Sci 50(1):131–14310.1016/j.corsci.2007.06.017 ↗
35. Zuo J, Wu B, Luo C, Dong B, Xing F (2019) Preparation of MgAl layered double hydroxides intercalated with nitrite ions and corrosion protection of steel bars in simulated carbonated concrete pore solution. Corros Sci 152:120–12910.1016/j.corsci.2019.03.007 ↗
36. Liyana NK, Fazal MA, Haseeb ASMA, Rubaiee S (2019) Effect of Zn incorporation on the electrochemical corrosion properties of SAC105 solder alloys. J Mater Sci Mater Electron 30:7415–742210.1007/s10854-019-01055-z ↗
37. Ribeiro DV, Abrantes JCC (2016) Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach. Constr Build Mater 111:98–10410.1016/j.conbuildmat.2016.02.047 ↗
38. El-Taib Heakal F, Fekry AM, Ghoneim AA (2008) Corrosion characterization of new tin–silver binary alloys in nitric acid solutions. Corros Sci 50(6):1618–1626. https://doi.org/10.1016/j.corsci.2008.02.00310.1016/j.corsci.2008.02.003 ↗
39. Liu J-C, Park S, Nagao S, Nogi M, Koga H, Ma J-S, Zhang G, Suganuma K (2015) The role of Zn precipitates and Cl− anions in pitting corrosion of Sn–Zn solder alloys. Corros Sci 92:263–271. https://doi.org/10.1016/j.corsci.2014.12.01410.1016/j.corsci.2014.12.014 ↗
40. Etteyeb N, Nóvoa XR (2016) Inhibition effect of some trees cultivated in arid regions against the corrosion of steel reinforcement in alkaline chloride solution. Corros Sci 112:471–482. https://doi.org/10.1016/j.corsci.2016.07.01610.1016/j.corsci.2016.07.016 ↗
41. Koga GY, Albert B, Roche V, Nogueira RP (2019) On the intrinsic passivating ability of Belite-Ye’elimite-Ferrite towards carbon steel: a straightforward comparison with ordinary Portland cement. Corros Sci 147:141–151. https://doi.org/10.1016/j.corsci.2018.11.01210.1016/j.corsci.2018.11.012 ↗
42. Shi J, Li M, Wu M, Ming J (2021) Role of red mud in natural passivation and chloride-induced depassivation of reinforcing steels in alkaline concrete pore solutions. Corros Sci 190:10966910.1016/j.corsci.2021.109669 ↗
43. Burak Gunay H, Pouria Ghods O, Isgor B, Carpenter GJC, Xiaohua W (2013) Characterization of atomic structure of oxide films on carbon steel in simulated concrete pore solutions using EELS. Appl Surf Sci 274:195–202. https://doi.org/10.1016/j.apsusc.2013.03.01410.1016/j.apsusc.2013.03.014 ↗
44. Liu Y, Shi J (2022) Corrosion resistance of carbon steel in alkaline concrete pore solutions containing phytate and chloride ions. Corros Sci 205:11045110.1016/j.corsci.2022.110451 ↗
45. Farahmand R, Sohrabi B, Ghaffarinejad A, Meymian MRZ (2018) Synergistic effect of molybdenum coating and SDS surfactant on corrosion inhibition of mild steel in presence of 3.5% NaCl. Corros Sci 136:393–401. https://doi.org/10.1016/j.corsci.2018.03.03010.1016/j.corsci.2018.03.030 ↗
46. Zhang M, Chen J, Ma Y, Shen L, He Y, Lin H (2016) Fractal reconstruction of rough membrane surface related with membrane fouling in a membrane bioreactor. Biores Technol 216:817–82310.1016/j.biortech.2016.06.034 ↗
47. Johnson D, Hilal N (2019) Polymer membranes–fractal characteristics and determination of roughness scaling exponents. J Membr Sci 570–571:9–22. https://doi.org/10.1016/j.memsci.2018.10.02410.1016/j.memsci.2018.10.024 ↗
48. Liu X, Zhang H, Tong H, Sui Y, Li X, Hou J (2024) Effect of surface roughness on the corrosion behavior of 304 stainless steel in seawater. Journal of Materials Engineering and Performance, 1-11.10.1007/s11665-024-10527-1 ↗
49. Mohan M, Singh S, Pandel U, Kumar K, Srivastava C (2024) Optimization of surface oxide chemistry for enhanced corrosion resistance of AlMnFeCoNi–carbon nanotube composite coatings. J Alloys Comp 1003:17576610.1016/j.jallcom.2024.175766 ↗
50. Zhang B, Wang J, Wu B, Guo XW, Wang YJ, Chen D, Zhang YC, Du K, Oguzie EE, Ma XL (2018) Unmasking chloride attack on the passive film of metals. Nat Commun. https://doi.org/10.1038/s41467-018-04942-x10.1038/s41467-018-04942-x ↗
51. Ghods P, Isgor OB, Carpenter GJC, Li J, McRae GA, Gu GP (2013) Nano-scale study of passive films and chloride-induced depassivation of carbon steel rebar in simulated concrete pore solutions using FIB/TEM. Cem Concr Res 47:55–68. https://doi.org/10.1016/j.cemconres.2013.01.00910.1016/j.cemconres.2013.01.009 ↗
52. Shi J, Ming J, Wang D, Wu M (2020) Improved corrosion resistance of a new 6% Cr steel in simulated concrete pore solution contaminated by chlorides. Corros Sci 174:10885110.1016/j.corsci.2020.108851 ↗
53. Luo H, Huaizhi S, Dong C, Li X (2017) Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution. Appl Surf Sci 400:38–48. https://doi.org/10.1016/j.apsusc.2016.12.18010.1016/j.apsusc.2016.12.180 ↗
54. Poursaee A, Angst UM (2023) Principles of corrosion of steel in concrete structures. Corrosion of Steel in Concrete Structures. Elsevier, pp 17–34. https://doi.org/10.1016/B978-0-12-821840-2.00004-310.1016/B978-0-12-821840-2.00004-3 ↗
55. Zhang Y, Poursaee A (2015) Study of the semi-conductive behavior of the passive film on carbon steel in simulated concrete pore solution under stress. Anti-Corros Methods Mater 62(6):363–370. https://doi.org/10.1108/ACMM-04-2014-137510.1108/ACMM-04-2014-1375 ↗
56. Macdonald DD, Qiu J, Zhu Y, Yang J, Engelhardt GR, Sagüés A (2020) Corrosion of rebar in concrete. Part I: calculation of the corrosion potential in the passive state. Corros Science 177:10901810.1016/j.corsci.2020.109018 ↗
57. Yu S, Liu Q, Hong F, Wang P, Hou D, Wang M (2024) Crystal structure-dependent evaluation of chloride ions resistance of iron passivation film in reinforced concrete at the nanoscale. J Build Eng 95:11017910.1016/j.jobe.2024.110179 ↗
58. Chen Z, Wei Z, Chen Y, Nong Y, Yi C (2022) Molecular insight into iron corrosion induced by chloride and sulphate. Comput Mater Sci 209:11142910.1016/j.commatsci.2022.111429 ↗