Performance and hydration mechanism of β-hemihydrate phosphogypsum with granulated blast furnace slag and carbide slag
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Rock Mechanics and Modeling · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Zhao Y, Qiu J, Zhang S, Guo Z, Wu P, Sun X, Gu X (2022) Recycling of arsenic-containing biohydrometallurgy waste to produce a binder for cemented paste backfill: mix proportion optimization. Powder Technol 398:117155. https://doi.org/10.1016/j.powtec.2022.11715510.1016/j.powtec.2022.117155 ↗
2. Anurag, Kumar R, Goyal S, Srivastava A (2021) A comprehensive study on the influence of supplementary cementitious materials on physico-mechanical, microstructural and durability properties of low carbon cement composites. Powder Technol 394:645–668. https://doi.org/10.1016/j.powtec.2021.08.08110.1016/j.powtec.2021.08.081 ↗
3. Jiang H, Ren L, Zhang Q, Zheng J, Cui L (2022) Strength and microstructural evolution of alkali-activated slag-based cemented paste backfill: Coupled effects of activator composition and temperature. Powder Technol 401:117322. https://doi.org/10.1016/j.powtec.2022.11732210.1016/j.powtec.2022.117322 ↗
4. Plaza MG, Martínez S, Rubiera F (2020) CO2 Capture, Use, and Storage in the Cement Industry: State of the Art and Expectations. Energies 13:5692. https://doi.org/10.3390/en1321569210.3390/en13215692 ↗
5. Guo Y, Luo L, Liu T, Hao L, Li Y, Liu P, Zhu T (2024) A review of low-carbon technologies and projects for the global cement industry. J Environ Sci 136:682–697. https://doi.org/10.1016/j.jes.2023.01.02110.1016/j.jes.2023.01.021 ↗
6. Shi Y, Song Y, Min C, Du J, Wang X, Min J, Wang S (2023) Phosphogypsum pretreatment with CaCO3 to improve the backfill performance. Case Stud Constr Mater 18:e01954. https://doi.org/10.1016/j.cscm.2023.e0195410.1016/j.cscm.2023.e01954 ↗
7. Xu L, Wang J, Hu X, Ran B, Huang R, Tang H, Li Z, Li B, Wu S (2024) Modification of recycled cement with phosphogypsum and ground granulated blast furnace slag. Constr Build Mater 426:136241. https://doi.org/10.1016/j.conbuildmat.2024.13624110.1016/j.conbuildmat.2024.136241 ↗
8. Wu F, Ren Y, Qu G, Liu S, Chen B, Liu X, Zhao C, Li J (2022) Utilization path of bulk industrial solid waste: a review on the multi-directional resource utilization path of phosphogypsum. J Environ Manage 313:114957. https://doi.org/10.1016/j.jenvman.2022.11495710.1016/j.jenvman.2022.114957 ↗
9. Ou L, Li R, Zhu H, Zhao H, Chen R (2023) Upcycling waste phosphogypsum as an alternative filler for asphalt pavement. J Clean Prod 420:138332. https://doi.org/10.1016/j.jclepro.2023.13833210.1016/j.jclepro.2023.138332 ↗
10. Jin Z, Cui C, Su Y, He X, Wang Y, Qi H, Li Y, Duan X (2024) Improvement of the mechanical properties of beta-hemihydrate phosphogypsum by incorporating wet-ground low-calcium fly ash slurries. Constr Build Mater 428:136371. https://doi.org/10.1016/j.conbuildmat.2024.13637110.1016/j.conbuildmat.2024.136371 ↗
11. Wang J, Dong F, Wang Z, Yang F, Du M, Fu K, Wang Z (2020) A novel method for purification of phosphogypsum. Physicochem Probl Miner Process 56:975–983. https://doi.org/10.37190/ppmp/12785410.37190/ppmp/127854 ↗
12. Lv X, Xiang L (2022) The generation process, impurity removal and high-value utilization of phosphogypsum material. Nanomaterials 12:3021. https://doi.org/10.3390/nano1217302110.3390/nano12173021 ↗
13. Geraldo RH, Costa ARD, Kanai J, Silva JS, Souza JD, Andrade HMC, Gonçalves JP, Fontanini PSP, Camarini G (2020) Calcination parameters on phosphogypsum waste recycling. Constr Build Mater 256:119406. https://doi.org/10.1016/j.conbuildmat.2020.11940610.1016/j.conbuildmat.2020.119406 ↗
14. Chen X, Liu Y, Wu Q, Ding Y, Wang Q, Tang W, Zhu B (2022) Study on physical and chemical characteristics of β-hemihydrate phosphogypsum. Case Stud Constr Mater 17:e01461. https://doi.org/10.1016/j.cscm.2022.e0146110.1016/j.cscm.2022.e01461 ↗
15. Kondratieva N, Barre M, Goutenoire F, Sanytsky M (2017) Study of modified gypsum binder. Constr Build Mater 149:535–542. https://doi.org/10.1016/j.conbuildmat.2017.05.14010.1016/j.conbuildmat.2017.05.140 ↗
16. Wang Y, Huo H, Chen B, Cui Q (2023) Development and optimization of phosphogypsum-based geopolymer cement. Constr Build Mater 369:130577. https://doi.org/10.1016/j.conbuildmat.2023.13057710.1016/j.conbuildmat.2023.130577 ↗
17. Chen P, Ma B, Tan H, Wu L, Zheng Z, He X, Li H, Jin Z, Li M, Lv Z (2022) Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast-furnace slag and steel slag. Constr Build Mater 344:128265. https://doi.org/10.1016/j.conbuildmat.2022.12826510.1016/j.conbuildmat.2022.128265 ↗
18. Bellum RR, Muniraj K, Madduru SRC (2020) Influence of slag on mechanical and durability properties of fly ash-based geopolymer concrete. J Korean Ceram Soc 57:530–545. https://doi.org/10.1007/s43207-020-00056-710.1007/s43207-020-00056-7 ↗
19. Gołek ŁP, Szudek W, Malik M (2022) The effect of the type of activator anion on the hydration of ground granulated blast furnace slag. Materials 15:2835. https://doi.org/10.3390/ma1508283510.3390/ma15082835 ↗
20. Wang H, Xu W, Sharif M, Cheng G, Zhang Z (2022) Resource utilization of solid waste carbide slag: a brief review of application technologies in various scenes, Waste Dispos. Sustain Energy 4:1–16. https://doi.org/10.1007/s42768-021-00090-z10.1007/s42768-021-00090-z ↗
21. Wang Y, Xu L, He X, Su Y, Miao W, Strnadel B, Huang X (2022) Hydration and rheology of activated ultra-fine ground granulated blast furnace slag with carbide slag and anhydrous phosphogypsum. Cem Concr Compos 133:104727. https://doi.org/10.1016/j.cemconcomp.2022.10472710.1016/j.cemconcomp.2022.104727 ↗
22. Zhu C, Tan H, Du C, Wang J, Deng X, Zheng Z, He X (2023) Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: towards low carbon emissions. J Build Eng 63:105475. https://doi.org/10.1016/j.jobe.2022.10547510.1016/j.jobe.2022.105475 ↗
23. Gu K, Maierdan Y, Chen B (2022) Effects of ethylenediamine tetra-acetic acid (EDTA) and its disodium salt derivative (EDTA-Na) on the characteristics of magnesium oxysulfate (MOS) cement. Compos Part B Eng 232:109654. https://doi.org/10.1016/j.compositesb.2022.10965410.1016/j.compositesb.2022.109654 ↗
24. Li M, Deng X, Jian S, Huang J, He X, Yang J, Tan H (2024) Effects of ettringite seed on the hydration and properties of supersulphated phosphogypsum-slag cement. J Clean Prod 452:142105. https://doi.org/10.1016/j.jclepro.2024.14210510.1016/j.jclepro.2024.142105 ↗
25. Liao Y, Lv Y, Huang G, Ren S, Wang X-Y, Guo R, Tian Y, Deng S, Lin R-S (2024) Strength and microstructure analysis of subgrade materials containing red sandstone-limestone-cement composites and red sandstone gravel. Constr Build Mater 416:135190. https://doi.org/10.1016/j.conbuildmat.2024.13519010.1016/j.conbuildmat.2024.135190 ↗
26. Ji X, Wang Z, Wang X, Zhao X, Zhang H, Zhang T (2024) Microstructures and properties of alkali-activated slags with composite activator: effects of Na2O equivalents. J Clean Prod 450:141754. https://doi.org/10.1016/j.jclepro.2024.14175410.1016/j.jclepro.2024.141754 ↗
27. Ting L, Qiang W, Shiyu Z (2019) Effects of ultra-fine ground granulated blast-furnace slag on initial setting time, fluidity and rheological properties of cement pastes. Powder Technol 345:54–63. https://doi.org/10.1016/j.powtec.2018.12.09410.1016/j.powtec.2018.12.094 ↗
28. Liu S, Wang Y, Wu A, Liu P, Chang Y, Ruan Z (2024) Performance evolution of alkali-activated phosphorus slag paste filling material: effect of hemihydrate phosphogypsum content. Process Saf Environ Prot 187:736–748. https://doi.org/10.1016/j.psep.2024.05.01810.1016/j.psep.2024.05.018 ↗
29. Lam TV, Nguyen MH (2023) Incorporating industrial by-products into geopolymer mortar: effects on strength and durability. Materials 16:4406. https://doi.org/10.3390/ma1612440610.3390/ma16124406 ↗
30. Yao P, Lin X, Wu Y, Ji T, Liang Y (2024) Influence of slag on water resistance of magnesium silicon potassium phosphate cement. J Build Eng 97:110862. https://doi.org/10.1016/j.jobe.2024.11086210.1016/j.jobe.2024.110862 ↗
31. Chen X, Gao J, Zhao Y (2019) Investigation on the hydration of hemihydrate phosphogypsum after post treatment. Constr Build Mater 229:116864. https://doi.org/10.1016/j.conbuildmat.2019.11686410.1016/j.conbuildmat.2019.116864 ↗
32. Chen P, Ma B, Tan H (2023) Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field. J Build Eng 77:107437. https://doi.org/10.1016/j.jobe.2023.10743710.1016/j.jobe.2023.107437 ↗
33. Hanjitsuwan S, Hunpratub S, Thongbai P, Maensiri S, Sata V, Chindaprasirt P (2014) Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste. Cem Concr Compos 45:9–14. https://doi.org/10.1016/j.cemconcomp.2013.09.01210.1016/j.cemconcomp.2013.09.012 ↗
34. Yang G, Liu F, Xie Q, Yang M, Li Y, Kumar ER, Sun J (2024) Exploration of iron ore tailings with high volume in sustainable cement and ecofriendly cementitious material. Dev Built Environ 19:100482. https://doi.org/10.1016/j.dibe.2024.10048210.1016/j.dibe.2024.100482 ↗
35. Gebregziabiher BS, Thomas R, Peethamparan S (2015) Very early-age reaction kinetics and microstructural development in alkali-activated slag. Cem Concr Compos 55:91–102. https://doi.org/10.1016/j.cemconcomp.2014.09.00110.1016/j.cemconcomp.2014.09.001 ↗
36. Ben Haha M, Le Saout G, Winnefeld F, Lothenbach B (2011) Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags. Cem Concr Res 41:301–310. https://doi.org/10.1016/j.cemconres.2010.11.01610.1016/j.cemconres.2010.11.016 ↗
37. Kim MS, Jun Y, Lee C, Oh JE (2013) Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag. Cem Concr Res 54:208–214. https://doi.org/10.1016/j.cemconres.2013.09.01110.1016/j.cemconres.2013.09.011 ↗
38. Jin Z, Ma B, Su Y, Lu W, Qi H, Hu P (2020) Effect of calcium sulphoaluminate cement on mechanical strength and waterproof properties of beta-hemihydrate phosphogypsum. Constr Build Mater 242:118198. https://doi.org/10.1016/j.conbuildmat.2020.11819810.1016/j.conbuildmat.2020.118198 ↗
39. Jeong Y, Park H, Jun Y, Jeong JH, Oh JE (2016) Influence of slag characteristics on strength development and reaction products in a CaO-activated slag system. Cem Concr Compos 72:155–167. https://doi.org/10.1016/j.cemconcomp.2016.06.00510.1016/j.cemconcomp.2016.06.005 ↗
40. Liao Y, Yao J, Deng F, Li H, Wang K, Tang S (2023) Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime. J Build Eng 80:108075. https://doi.org/10.1016/j.jobe.2023.10807510.1016/j.jobe.2023.108075 ↗
41. Zhao Y, Ma Z, Qiu J, Sun X, Gu X (2021) Temperature-dependent hydration and mechanical properties of high-volume fly ash cement with chemical additives. J Mater Civ Eng 33:04021065. https://doi.org/10.1061/(ASCE)MT.1943-5533.000368410.1061/(ASCE)MT.1943-5533.0003684 ↗
42. Lee W-H, Wang J-H, Ding Y-C, Cheng T-W (2019) A study on the characteristics and microstructures of GGBS/FA based geopolymer paste and concrete. Constr Build Mater 211:807–813. https://doi.org/10.1016/j.conbuildmat.2019.03.29110.1016/j.conbuildmat.2019.03.291 ↗
43. Qi H, Yan X, Ma B, Tan H, He X, Su Y, Jin Z, Guan S (2023) Improving the volume stability of the β-hemihydrate phosphogypsum—cement system by incorporating GGBS. Constr Build Mater 408:133807. https://doi.org/10.1016/j.conbuildmat.2023.13380710.1016/j.conbuildmat.2023.133807 ↗
44. Yang J, Zeng J, He X, Hu H, Su Y, Bai H, Tan H (2021) Eco-friendly UHPC prepared from high volume wet-grinded ultrafine GGBS slurry. Constr Build Mater 308:125057. https://doi.org/10.1016/j.conbuildmat.2021.12505710.1016/j.conbuildmat.2021.125057 ↗
45. Maierdan Y, Haque MA, Chen B, Maimaitiyiming M, Ahmad MR (2020) Recycling of waste river sludge into unfired green bricks stabilized by a combination of phosphogypsum, slag, and cement. Constr Build Mater 260:120666. https://doi.org/10.1016/j.conbuildmat.2020.12066610.1016/j.conbuildmat.2020.120666 ↗
46. Zhang J, Tan H, Bao M, Liu X, Luo Z, Wang P (2021) Low carbon cementitious materials: Sodium sulfate activated ultra-fine slag/fly ash blends at ambient temperature. J Clean Prod 280:124363. https://doi.org/10.1016/j.jclepro.2020.12436310.1016/j.jclepro.2020.124363 ↗
47. Yang J, Zeng J, He X, Zhang Y, Su Y, Tan H (2022) Sustainable clinker-free solid waste binder produced from wet-ground granulated blast-furnace slag, phosphogypsum and carbide slag. Constr Build Mater 330:127218. https://doi.org/10.1016/j.conbuildmat.2022.12721810.1016/j.conbuildmat.2022.127218 ↗