Influence of moulding processing on poly (lactic acid) (PLA) semi-crystalline properties
Source abstract
Abstract
Poly (lactic acid) (PLA) is a bio-based and compostable polyester, widely employed in a variety of daily used products, being easily processed via the traditional manufacturing techniques, i.e., injection moulding (IM), compression moulding (CM), blow moulding (BM), etc. This study will be specifically focused on the impact of both IM and CM processing techniques on PLA characteristics, aiming to optimize these manufacturing procedures and ultimately improving its end-products features. By means of thermal, mechanical and microscopy analysis, the role of the different moulding techniques in influencing the PLA semi-crystalline development will be extensively investigated, also by correlating the related morphology with its macroscopical behavior. It will be observed that the polymer flow orientation during IM promotes the semi-crystalline development, as confirmed by Avrami analysis, XRD measurements, and TEM imaging. Moulded sample thickness, manufacturing pressure, and PLA granular consolidation that differ for the two moulding methodologies appear to be directly accountable for the detected faster crystallization kinetics during IM when compared to the CM one. Finally, by combining thermal information (Gibbs–Thomson equation), XRD data (Scherrer equation) and TEM imaging, the size of the crystalline lamellae during PLA crystallization will be sampled, also detecting the phenomenon of "lamellar thickening" as the crystalline content increases in both the injection and compression moulded samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies · Carbon dioxide utilization in catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Gim J, Turng L-SS (2022) A review of current advancements in high surface quality injection molding: Measurement, influencing factors, prediction, and control. Polym Test 115:107718. https://doi.org/10.1016/j.polymertesting.2022.10771810.1016/j.polymertesting.2022.107718 ↗
2. Courgneau C, Domenek S, Guinault A, Avérous L, Ducruet V (2011) Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly(lactic acid). J Polym Environ 19:362–371. https://doi.org/10.1007/s10924-011-0285-510.1007/s10924-011-0285-5 ↗
3. Jandas PJ, Prabakaran K, Mohanty S, Nayak SK (2019) Evaluation of biodegradability of disposable product prepared from poly (lactic acid) under accelerated conditions. Polym Degrad Stab 164:46–54. https://doi.org/10.1016/j.polymdegradstab.2019.04.00410.1016/j.polymdegradstab.2019.04.004 ↗
4. Kuei B, Aplan MP, Litofsky JH, Gomez ED (2020) New opportunities in transmission electron microscopy of polymers. Mater Sci Eng R Reports 139:100516. https://doi.org/10.1016/j.mser.2019.10051610.1016/j.mser.2019.100516 ↗
5. Jem KJ, Tan B (2020) The development and challenges of poly (lactic acid) and poly (glycolic acid). Adv Ind Eng Polym Res 3:60–70. https://doi.org/10.1016/j.aiepr.2020.01.00210.1016/j.aiepr.2020.01.002 ↗
6. Atiwesh G, Mikhael A, Parrish CC, Banoub J, Le TAT (2021) Environmental impact of bioplastic use: A review. Heliyon 7:e07918. https://doi.org/10.1016/j.heliyon.2021.e0791810.1016/j.heliyon.2021.e07918 ↗
7. The Plastic Packaging Problem, (n.d.)
8. Mofokeng JP, Luyt AS, Tábi T, Kovács J (2012) Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices. J Thermoplast Compos Mater 25:927–948. https://doi.org/10.1177/089270571142329110.1177/0892705711423291 ↗
9. Quynh TM, Mai HH, Lan PN (2013) Stereocomplexation of low molecular weight poly(l-lactic acid) and high molecular weight poly(d-lactic acid), radiation crosslinking PLLA/PDLA stereocomplexes and their characterization. Radiat Phys Chem 83:105–110. https://doi.org/10.1016/j.radphyschem.2012.10.00210.1016/j.radphyschem.2012.10.002 ↗
10. Höglund A, Hakkarainen M, Albertsson AC (2010) Migration and hydrolysis of hydrophobic polylactide plasticizer. Biomacromol 11:277–283. https://doi.org/10.1021/bm901157h10.1021/bm901157h ↗
11. Sharma S (2021) Polylactic acid (PLA) and its composites: an eco-friendly solution for packaging. In: Athanassiou A (ed) Sustainable food packaging technology. https://doi.org/10.1002/9783527820078.ch410.1002/9783527820078.ch4 ↗
12. Tseng CH, Tsai PS (2022) The isothermal and nonisothermal crystallization kinetics and morphology of solvent-precipitated nylon 66. Polymers (Basel) 14(3):442. https://doi.org/10.3390/polym1403044210.3390/polym14030442 ↗
13. Oksiuta Z, Jalbrzykowski M, Mystkowska J, Romanczuk E, Osiecki T (2020) Mechanical and thermal properties of polylactide (PLA) composites modified with Mg, Fe, and polyethylene (PE) additives. Polymers (Basel) 12:1–14. https://doi.org/10.3390/polym1212293910.3390/polym12122939 ↗
14. Cai H, Dave V, Gross RA, McCarthy SP (1996) Effects of physical aging, crystallinity, and orientation on the enzymatic degradation of poly(lactic acid). J Polym Sci Part B Polym Phys 34:2701–2708. https://doi.org/10.1002/(SICI)1099-0488(19961130)34:16%3c2701::AID-POLB2%3e3.0.CO;2-S10.1002/(SICI)1099-0488(19961130)34:16<2701::AID-POLB2>3.0.CO;2-S ↗
15. Sreekumar K, Bindhu B, Veluraja K (2021) Perspectives of polylactic acid from structure to applications. Polym Renew Resour 12(60):74. https://doi.org/10.1177/2041247921100877310.1177/20412479211008773 ↗
16. Talbott MF, Springer GS, Berglund LA (1987) The effects of crystallinity on the mechanical properties of PEEK polymer and graphite fiber reinforced PEEK. J Compos Mater 21:1056–1081. https://doi.org/10.1177/00219983870210110410.1177/002199838702101104 ↗
17. Katogi H, Takemura K (2014) The effect of crystallinity on the mechanical properties of plain woven carbon reinforced composites using polypropylene. WIT Trans Built Environ 137:301–310. https://doi.org/10.2495/HPSM14028110.2495/HPSM140281 ↗
18. Aliotta L, Sciara LM, Cinelli P, Canesi I, Lazzeri A (2022) Improvement of the PLA crystallinity and heat distortion temperature optimizing the content of nucleating agents and the injection molding cycle time. Polymers (Basel) 14(5):977. https://doi.org/10.3390/polym1405097710.3390/polym14050977 ↗
19. Aliotta L, Cinelli P, Coltelli MB, Righetti MC, Gazzano M, Lazzeri A (2017) Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA). Eur Polym J 93:822–832. https://doi.org/10.1016/j.eurpolymj.2017.04.04110.1016/j.eurpolymj.2017.04.041 ↗
20. Renouf-Glauser AC, Rose J, Farrar DF, Cameron RE (2005) The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA. Biomaterials 26:5771–5782. https://doi.org/10.1016/j.biomaterials.2005.03.00210.1016/j.biomaterials.2005.03.002 ↗
21. Guinault A, Sollogoub C, Domenek S, Grandmontagne A, Ducruet V (2010) Influence of crystallinity on gas barrier and mechanical properties of pla food packaging films. Int J Mater Form 3:603–606. https://doi.org/10.1007/s12289-010-0842-910.1007/s12289-010-0842-9 ↗
22. Guinault A, Sollogoub C, Ducruet V, Domenek S (2012) Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties. Eur Polym J 48:779–788. https://doi.org/10.1016/j.eurpolymj.2012.01.01410.1016/j.eurpolymj.2012.01.014 ↗
23. Courgneau C, Domenek S, Lebossé R, Guinault A, Avérous L, Ducruet V (2012) Effect of crystallization on barrier properties of formulated polylactide. Polym Int 61:180–189. https://doi.org/10.1002/pi.316710.1002/pi.3167 ↗
24. Jia Y, Mao Z, Huang W, Zhang J (2022) Effect of temperature and crystallinity on the thermal conductivity of semi-crystalline polymers: a case study of polyethylene. Mater Chem Phys 287:126325. https://doi.org/10.1016/j.matchemphys.2022.12632510.1016/j.matchemphys.2022.126325 ↗
25. Fischer EW, Sterzel HJ, Wegner G (1973) Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Kolloid-Zeitschrift Und Zeitschrift Für Polym 251:980–990. https://doi.org/10.1007/BF0149892710.1007/BF01498927 ↗
26. Molinari G, Parlanti P, Aliotta L, Lazzeri A, Gemmi M (2023) TEM morphological analysis of biopolymers: the case of poly (Lactic Acid) (PLA). Mater Today Commun 38:107868. https://doi.org/10.1016/j.mtcomm.2023.10786810.1016/j.mtcomm.2023.107868 ↗
27. Yu L, Davidson E, Sharma A, Andersson MR, Segalman R, Müller C (2017) Isothermal crystallization kinetics and time-temperature-transformation of the conjugated polymer: poly(3-(2′-ethyl)hexylthiophene). Chem Mater 29:5654–5662. https://doi.org/10.1021/acs.chemmater.7b0139310.1021/acs.chemmater.7b01393 ↗
28. Lu F, Yu H, Yan C, Yao J (2016) Polylactic acid nanocomposite films with spherical nanocelluloses as efficient nucleation agents: Effects on crystallization, mechanical and thermal properties. RSC Adv 6:46008–46018. https://doi.org/10.1039/c6ra02768g10.1039/c6ra02768g ↗
29. Lorenzo AT, Arnal ML, Albuerne J, Müller AJ (2007) DSC isothermal polymer crystallization kinetics measurements and the use of the Avrami equation to fit the data: Guidelines to avoid common problems. Polym Test 26:222–231. https://doi.org/10.1016/j.polymertesting.2006.10.00510.1016/j.polymertesting.2006.10.005 ↗
30. Ji F, Li J, Weng Y, Ren J (2020) Synthesis of PLA-based thermoplastic elastomer and study on preparation and properties of PLA-based shape memory polymers. Mater Res Express 7:015315. https://doi.org/10.1088/2053-1591/ab61a810.1088/2053-1591/ab61a8 ↗
31. Xie HLM, Chen J (2010) Morphology and mechanical properties of injection-molded ultrahigh molecular weight polyethylene/polypropylene blends and comparison with compression molding. J Appl Polym Sci 116:2658–2667. https://doi.org/10.1002/app10.1002/app ↗
32. Simmons DS (2016) An emerging unified view of dynamic interphases in polymers. Macromol Chem Phys 217:137–148. https://doi.org/10.1002/macp.20150028410.1002/macp.201500284 ↗
33. Chen Z, Hay JN, Jenkins MJ (2016) The effect of secondary crystallization on crystallization kinetics—polyethylene terephthalate revisited. Eur Polym J 81:216–223. https://doi.org/10.1016/j.eurpolymj.2016.05.02810.1016/j.eurpolymj.2016.05.028 ↗
34. Seo J, Zhang X, Schaake RP, Rhoades AM, Colby RH (2021) Dual Nakamura model for primary and secondary crystallization applied to nonisothermal crystallization of poly(ether ether ketone). Polym Eng Sci 61:2416–2426. https://doi.org/10.1002/pen.2576710.1002/pen.25767 ↗
35. Polińska M, Rozanski A, Galeski A, Bojda J (2021) The modulus of the amorphous phase of semicrystalline polymers. Macromolecules 54:9113–9123. https://doi.org/10.1021/acs.macromol.1c0157610.1021/acs.macromol.1c01576 ↗
36. Liparoti S, De Piano G, Salomone R, Pantani R (2023) Analysis of weld lines in micro-injection molding. Materials (Basel) 16(17):6053. https://doi.org/10.3390/ma1617605310.3390/ma16176053 ↗
37. Zhang J, Tashiro K, Tsuji H, Domb AJ (2008) Disorder-to-order phase transition and multiple melting behavior of poly(l-lactide) investigated by simultaneous measurements of WAXD and DSC. Macromolecules 41:1352–1357. https://doi.org/10.1021/ma070607110.1021/ma0706071 ↗
38. Lee HW, Insyani R, Prasetyo D, Prajitno H, Sitompul J (2015) Molecular weight and structural properties of biodegradable PLA synthesized with different catalysts by direct melt polycondensation. J Eng Technol Sci 47:364–373. https://doi.org/10.5614/j.eng.technol.sci.2015.47.4.210.5614/j.eng.technol.sci.2015.47.4.2 ↗
39. Partini M, Pantani R (2007) Determination of crystallinity of an aliphatic polyester by FTIR spectroscopy. Polym Bull 59:403–412. https://doi.org/10.1007/s00289-007-0782-910.1007/s00289-007-0782-9 ↗
40. Meaurio E, López-Rodríguez N, Sarasua JR (2006) Infrared spectrum of poly(l-lactide): application to crystallinity studies. Macromolecules 39:9291–9301. https://doi.org/10.1021/ma061890r10.1021/ma061890r ↗
41. Zhu Z, Bian Y, Zhang X, Zeng R, Yang B (2022) Study of crystallinity and conformation of poly(lactic acid) by terahertz spectroscopy. Anal Chem 94:11104–11111. https://doi.org/10.1021/acs.analchem.2c0265210.1021/acs.analchem.2c02652 ↗
42. Yang CF, Huang YF, Ruan J, Su AC (2012) Extensive development of precursory helical pairs prior to formation of stereocomplex crystals in racemic polylactide melt mixture. Macromolecules 45:872–878. https://doi.org/10.1021/ma202699510.1021/ma2026995 ↗
43. Farid T, Herrera VN, Kristiina O (2018) Investigation of crystalline structure of plasticized poly (lactic acid)/Banana nanofibers composites. IOP Conf Ser Mater Sci Eng 369:012031. https://doi.org/10.1088/1757-899X/369/1/01203110.1088/1757-899X/369/1/012031 ↗
44. Aliotta L, Gazzano M, Lazzeri A, Righetti MC (2020) Constrained amorphous interphase in poly(l-lactic acid): estimation of the tensile elastic modulus. ACS Omega 5:20890–20902. https://doi.org/10.1021/acsomega.0c0233010.1021/acsomega.0c02330 ↗
45. Wasanasuk K, Tashiro K (2011) Crystal structure and disorder in Poly(l-lactic acid) δ form (α′ form) and the phase transition mechanism to the ordered α form. Polymer (Guildf) 52:6097–6109. https://doi.org/10.1016/j.polymer.2011.10.04610.1016/j.polymer.2011.10.046 ↗
46. Kawai T, Rahman N, Matsuba G, Nishida K, Kanaya T, Nakano M, Okamoto H, Kawada J, Usuki A, Honma N, Nakajima K, Matsuda M (2007) Crystallization and melting behavior of poly (l-lactic Acid). Macromolecules 40:9463–9469. https://doi.org/10.1021/ma070082c10.1021/ma070082c ↗
47. Pan P, Zhu B, Kai W, Dong T, Inoue Y (2008) Polymorphic transition in disordered poly(l-lactide) crystals induced by annealing at elevated temperatures. Macromolecules 41:4296–4304. https://doi.org/10.1021/ma800343g10.1021/ma800343g ↗
48. SadAbadi H, Ghasemi M (2007) Effects of some injection molding process parameters on fiber orientation tensor of short glass fiber polystyrene composites (SGF/PS). J Reinf Plast Compos 26:1729–1741. https://doi.org/10.1177/073168440708135210.1177/0731684407081352 ↗
49. Pantani R, Coccorullo I, Speranza V, Titomanlio G (2005) Modeling of morphology evolution in the injection molding process of thermoplastic polymers. Prog Polym Sci 30:1185–1222. https://doi.org/10.1016/j.progpolymsci.2005.09.00110.1016/j.progpolymsci.2005.09.001 ↗
50. Crist B, Schultz JM (2016) Polymer spherulites: a critical review. Prog Polym Sci 56:1–63. https://doi.org/10.1016/j.progpolymsci.2015.11.00610.1016/j.progpolymsci.2015.11.006 ↗
51. Ahmed J, Varshney SK (2011) Polylactides-chemistry, properties and green packaging technology: a review. Int J Food Prop 14:37–58. https://doi.org/10.1080/1094291090312528410.1080/10942910903125284 ↗
52. Hirata J, Kurokawa N, Okano M, Hotta A, Watanabe S (2020) Evaluation of crystallinity and hydrogen bond formation in stereocomplex poly(lactic acid) films by terahertz time-domain spectroscopy. Macromolecules 53:7171–7177. https://doi.org/10.1021/acs.macromol.0c0023710.1021/acs.macromol.0c00237 ↗
53. Saeidlou S, Huneault MA, Li H, Park CB (2012) Poly(lactic acid) crystallization. Prog Polym Sci 37:1657–1677. https://doi.org/10.1016/j.progpolymsci.2012.07.00510.1016/j.progpolymsci.2012.07.005 ↗
54. Song F, Wang Q, Wang T (2016) The effects of crystallinity on the mechanical properties and the limiting PV (pressure×velocity) value of PTFE. Tribol Int 93:1–10. https://doi.org/10.1016/j.triboint.2015.09.01710.1016/j.triboint.2015.09.017 ↗
55. Spooner J, Wiebe H, Boon N, Deglint E, Edwards E, Yanciw B, Patton B, Thiele L, Dance P, Weinberg N (2012) Molecular dynamics calculation of molecular volumes and volumes of activation. Phys Chem Chem Phys 14:2264–2277. https://doi.org/10.1039/c2cp22949h10.1039/c2cp22949h ↗
56. Haudin JM, Boyer SAE (2017) Crystallization of polymers in processing conditions: an overview. Int Polym Process 32:545–554. https://doi.org/10.3139/217.341510.3139/217.3415 ↗
57. Kahouli A (2012) Effect of film thickness on structural, morphology, dielectric and electrical properties of parylene C films. J Appl Phys 112(6):064103. https://doi.org/10.1063/1.475202210.1063/1.4752022 ↗
58. Piorkowska E, Galeski A, Haudin JM (2006) Critical assessment of overall crystallization kinetics theories and predictions. Prog Polym Sci 31:549–575. https://doi.org/10.1016/j.progpolymsci.2006.05.00110.1016/j.progpolymsci.2006.05.001 ↗
59. Schick C, Toda A, Androsch R (2021) The narrow thickness distribution of lamellae of poly(butylene succinate) formed at low melt supercooling. Macromolecules 54:3366–3376. https://doi.org/10.1021/acs.macromol.1c0038810.1021/acs.macromol.1c00388 ↗
60. Furushima Y, Nakada M, Murakami M, Yamane T, Toda A, Schick C (2015) Method for calculation of the lamellar thickness distribution of not-reorganized linear polyethylene using fast scanning calorimetry in heating. Macromolecules 48:8831–8837. https://doi.org/10.1021/acs.macromol.5b0227810.1021/acs.macromol.5b02278 ↗
61. Pyda M, Bopp RC, Wunderlich B (2004) Heat capacity of poly(lactic acid). J Chem Thermodyn 36:731–742. https://doi.org/10.1016/j.jct.2004.05.00310.1016/j.jct.2004.05.003 ↗
62. Phang IY, Pramoda KP, Liu T, He C (2004) Crystallization and melting behavior of polyester/clay nanocomposites. Polym Int 53:1282–1289. https://doi.org/10.1002/pi.151310.1002/pi.1513 ↗
63. Zhang RC, Sun D, Lu A, Zhong M, Xiong G, Wan Y (2017) Equilibrium melting temperature of polymorphic poly(l-lactide) and its supercooling dependence on growth kinetics. Polymers (Basel) 9(11):625. https://doi.org/10.3390/polym911062510.3390/polym9110625 ↗
64. Bassett DC, Patel D (1994) Isothermal lamellar thickening and the distribution of thermal stability in spherulitic isotactic poly(4-methylpentene-1). Polymer (Guildf) 35:1855–1862. https://doi.org/10.1016/0032-3861(94)90974-110.1016/0032-3861(94)90974-1 ↗
65. Cheng SZD, Zhang A, Barley JS, Chen J, Habenschuss A, Zschack PR (1991) Isothermal thickening and thinning processes in low molecular weight poly (ethylene oxide) fractions. 1. From nonintegral-folding to integral-folding chain crystal transitions. Macromolecules 24:3937–3944. https://doi.org/10.1021/ma00013a03010.1021/ma00013a030 ↗