Evaluating the effect of heat input on residual stress, texture and corrosion resistance in friction-stir-welded L-PBF AlSi10Mg alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Roehling JD, Coughlin DR, Gibbs JW, Baldwin JK, Mertens JCE, Campbell GH et al (2017) Rapid solidification growth mode transitions in Al–Si alloys by dynamic transmission electron microscopy. Acta Mater 131:22–30. https://doi.org/10.1016/j.actamat.2017.03.06110.1016/j.actamat.2017.03.061 ↗
2. Sabry N, Stroh J, Sediako D (2023) Characterization of microstructure and residual stress following the friction stir welding of dissimilar aluminum alloys. CIRP J Manuf Sci Technol 41:365–379. https://doi.org/10.1016/j.cirpj.2022.11.02110.1016/j.cirpj.2022.11.021 ↗
3. Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
4. Buchanan C, Gardner L (2019) Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges. Eng Struct 180:332–348. https://doi.org/10.1016/j.engstruct.2018.11.04510.1016/j.engstruct.2018.11.045 ↗
5. Tabatabaei N, Zarei-Hanzaki A, Moshiri A, Abedi HR (2023) The effect of heat treatment on the room and high temperature mechanical properties of AlSi10Mg alloy fabricated by selective laser melting. J Mater Res Technol 23:6039–6053. https://doi.org/10.1016/j.jmrt.2023.02.08610.1016/j.jmrt.2023.02.086 ↗
6. Tang H, Gao C, Zhang Y, Zhang N, Lei C, Bi Y et al (2023) Effects of direct aging treatment on microstructure, mechanical properties and residual stress of selective laser melted AlSi10Mg alloy. J Mater Sci Technol 139:198–209. https://doi.org/10.1016/j.jmst.2022.08.03210.1016/j.jmst.2022.08.032 ↗
7. Eckermann F, Suter T, Uggowitzer PJ, Afseth A, Schmutz P (2008) The influence of MgSi particle reactivity and dissolution processes on corrosion in Al-Mg-Si alloys. Electrochim Acta 54:844–855. https://doi.org/10.1016/j.electacta.2008.05.07810.1016/j.electacta.2008.05.078 ↗
8. Zheng Q, Wu J, Jiang H, Zhang L, Zhao J, He J (2021) Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys. Corros Sci 179:109113. https://doi.org/10.1016/j.corsci.2020.10911310.1016/j.corsci.2020.109113 ↗
9. Cabrini M, Lorenzi S, Pastore T, Pellegrini S, Manfredi D, Fino P et al (2016) Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of direct metal laser sintering. J Mater Process Technol 231:326–335. https://doi.org/10.1016/j.jmatprotec.2015.12.03310.1016/j.jmatprotec.2015.12.033 ↗
10. Revilla RI, Verkens D, Rubben T, De Graeve I (2020) Corrosion and corrosion protection of additively manufactured aluminium alloys—a critical review. Materials (Basel) 13:1–25. https://doi.org/10.3390/ma1321480410.3390/ma13214804 ↗
11. Rafieazad M, Chatterjee A, Nasiri AM (2019) Effects of recycled powder on solidification defects, microstructure, and corrosion properties of DMLS fabricated AlSi10Mg. Jom 71:3241–3252. https://doi.org/10.1007/s11837-019-03552-210.1007/s11837-019-03552-2 ↗
12. Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Eng R Reports 50:1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
13. Wang G, Zhao Y, Hao Y (2018) Friction stir welding of high-strength aerospace aluminum alloy and application in rocket tank manufacturing. J Mater Sci Technol 34:73–91. https://doi.org/10.1016/j.jmst.2017.11.04110.1016/j.jmst.2017.11.041 ↗
14. Palanivel R, Koshy Mathews P, Murugan N, Dinaharan I (2012) Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys. Mater Des 40:7–16. https://doi.org/10.1016/j.matdes.2012.03.02710.1016/j.matdes.2012.03.027 ↗
15. Colligan KJ, Mishra RS (2008) A conceptual model for the process variables related to heat generation in friction stir welding of aluminum. Scr Mater 58:327–331. https://doi.org/10.1016/j.scriptamat.2007.10.01510.1016/j.scriptamat.2007.10.015 ↗
16. Zhang C, Cao Y, Huang G, Zeng Q, Zhu Y, Huang X et al (2020) Influence of tool rotational speed on local microstructure, mechanical and corrosion behavior of dissimilar AA2024/7075 joints fabricated by friction stir welding. J Manuf Process 49:214–226. https://doi.org/10.1016/j.jmapro.2019.11.03110.1016/j.jmapro.2019.11.031 ↗
17. Fahimpour V, Sadrnezhaad SK, Karimzadeh F (2012) Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods. Mater Des 39:329–333. https://doi.org/10.1016/j.matdes.2012.02.04310.1016/j.matdes.2012.02.043 ↗
18. Leon A, Shirizly A, Aghion E (2016) Corrosion behavior of AlSi10Mg alloy produced by additive manufacturing (AM) vs. its counterpart gravity cast alloy. Metals 6(7):14810.3390/met6070148 ↗
19. Hui X, Jun G, Zhang X, Lei X, Lai F, Zhang C (2019) Corrosion behavior of selective laser melted AlSi10Mg alloy in NaCl solution and its dependence on heat treatment. Acta Metall Sin. https://doi.org/10.1007/s40195-019-00903-510.1007/s40195-019-00903-5 ↗
20. Girelli L, Veronesi P, Gelfi M (2019) Effect of the T6 heat treatment on corrosion behavior of additive manufactured and gravity cast AlSi10Mg alloy. Mater Corr 70:1–9. https://doi.org/10.1002/maco.20191089010.1002/maco.201910890 ↗
21. Gharavi F, Matori KA, Yunus R, Othman NK, Fadaeifard F (2015) Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process. J Mater Res Technol 4:314–322. https://doi.org/10.1016/j.jmrt.2015.01.00710.1016/j.jmrt.2015.01.007 ↗
22. Ra M, Mohammadi M, Nasiri AM (2019) On microstructure and early stage corrosion performance of heat treated direct metal laser sintered AlSi10Mg. Add Manufact 28:107–119. https://doi.org/10.1016/j.addma.2019.04.02310.1016/j.addma.2019.04.023 ↗
23. Rao AG, Katkar VA, Gunasekaran G, Deshmukh VP, Prabhu N, Kashyap BP (2014) Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al-30Si alloy. Corros Sci 83:198–208. https://doi.org/10.1016/j.corsci.2014.02.01310.1016/j.corsci.2014.02.013 ↗
24. Rambabu G, Balaji Naik D, Venkata Rao CH, Srinivasa Rao K, Madhusudan RG (2015) Optimization of friction stir welding parameters for improved corrosion resistance of AA2219 aluminum alloy joints. Def Technol 11:330–337. https://doi.org/10.1016/j.dt.2015.05.00310.1016/j.dt.2015.05.003 ↗
25. Moeini G, Sajadifar SV, Wegener T, Rössler C, Gerber A, Böhm S et al (2021) On the influence of build orientation on properties of friction stir welded Al–Si10Mg parts produced by selective laser melting. J Mater Res Technol 12:1446–1460. https://doi.org/10.1016/j.jmrt.2021.03.10110.1016/j.jmrt.2021.03.101 ↗
26. Du Z, Tan MJ (2018) Joining of 3D-printed AlSi10Mg by friction stir welding. Welding World 62:675–68210.1007/s40194-018-0585-7 ↗
27. ASTM (2012) E384: standard test method for Knoop and Vickers hardness of materials. ASTM Standard, pp 1–43
28. ASTM E8 (2010) ASTM E8/E8M standard test methods for tension testing of metallic materials 1. Annu B ASTM Stand, 4, 1–27. https://doi.org/10.1520/E000810.1520/E0008 ↗
29. He Z, Liang J, Zhang H, Guo E, Du W, Politis DJ et al (2023) Formability and microstructure of laser powder bed fused AlSi10Mg alloy sheets under various deformation conditions. Mater Charact 199:112813. https://doi.org/10.1016/j.matchar.2023.11281310.1016/j.matchar.2023.112813 ↗
30. Peng C, Jing C, Siyi Q, Siqi Z, Shoubo S, Ting J et al (2021) Friction stir welding joints of 2195–T8 Al–Li alloys: Correlation of temperature evolution, microstructure and mechanical properties. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2021.14150110.1016/j.msea.2021.141501 ↗
31. Sujith SV, Mulik RS (2020) Thermal history analysis and structure-property validation of friction stir welded Al-7079-TiC in-situ metal matrix composites. J Alloys Compd 812:152131. https://doi.org/10.1016/j.jallcom.2019.15213110.1016/j.jallcom.2019.152131 ↗
32. Salih OS, Neate N, Ou H, Sun W (2020) Influence of process parameters on the microstructural evolution and mechanical characterisations of friction stir welded Al-Mg-Si alloy. J Mater Process Technol 275:116366. https://doi.org/10.1016/j.jmatprotec.2019.11636610.1016/j.jmatprotec.2019.116366 ↗
33. Zhang C, Huang G, Cao Y, Zhu Y, Liu Q (2019) On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: effect of rotational speed. J Manuf Process 37:470–487. https://doi.org/10.1016/j.jmapro.2018.12.01410.1016/j.jmapro.2018.12.014 ↗
34. Minhas N, Sharma V, Manda S, Thakur A (2023) Insights into the microstructure evolution and mechanical behavior of dissimilar friction stir welded joints of additively manufactured AlSi10Mg and conventional 7075–T651 aluminum alloys. Mater Sci Eng A 881:145407. https://doi.org/10.1016/j.msea.2023.14540710.1016/j.msea.2023.145407 ↗
35. Minhas N, Sharma V, Bhadauria SS (2023) Enhancing the properties of friction stir welded joints of L-PBF printed AlSi10Mg alloy via multi-variable optimization. Arch Civ Mech Eng. https://doi.org/10.1007/s43452-022-00601-710.1007/s43452-022-00601-7 ↗
36. Kumar K, Kailas SV (2008) The role of friction stir welding tool on material flow and weld formation. Mater Sci Eng A 485:367–374. https://doi.org/10.1016/j.msea.2007.08.01310.1016/j.msea.2007.08.013 ↗
37. Ghali E (2010) Corrosion resistance of aluminum and magnesium alloys: understanding, performance, and testing. Wiley, Hoboken. https://doi.org/10.1002/978047053177810.1002/9780470531778 ↗
38. Lorking KF, Mayne JEO (1961) The corrosion of aluminium. J Appl Chem 11:170–180. https://doi.org/10.1002/jctb.501011050310.1002/jctb.5010110503 ↗
39. Kolics A, Besing AS, Baradlai P, Haasch R, Wieckowski A (2001) Effect of pH on thickness and ion content of the oxide film on aluminum in NaCl media. J Electrochem Soc 148:B251. https://doi.org/10.1149/1.137611810.1149/1.1376118 ↗
40. McCafferty E (1995) The electrode kinetics of pit initiation on aluminum. Corros Sci 37:481–492. https://doi.org/10.1016/0010-938X(94)00150-510.1016/0010-938X(94)00150-5 ↗
41. Böhni H, Uhlig HH (1969) Environmental factors affecting the critical pitting potential of aluminum. J Electrochem Soc 116:906. https://doi.org/10.1149/1.241216710.1149/1.2412167 ↗
42. Cabrini M, Lorenzi S, Pastore T, Testa C, Manfredi D, Lorusso M et al (2019) Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure. Corros Sci 152:101–108. https://doi.org/10.1016/j.corsci.2019.03.01010.1016/j.corsci.2019.03.010 ↗
43. Frankel GS (1998) Pitting corrosion of metals: a review of the critical factors. J Electrochem Soc 145:2186–2198. https://doi.org/10.1149/1.183861510.1149/1.1838615 ↗
44. Moreto JA, dos Santos MS, Ferreira MOA, Carvalho GS, Gelamo RV, Aoki IV et al (2021) Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524–T3 Al alloy joined by FSW process. Corros Sci 182:109253. https://doi.org/10.1016/j.corsci.2021.10925310.1016/j.corsci.2021.109253 ↗
45. Cabrini M, Lorenzi S, Pastore T, Pellegrini S, Ambrosio EP, Calignano F et al (2016) Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy. Electrochim Acta 206:346–355. https://doi.org/10.1016/j.electacta.2016.04.15710.1016/j.electacta.2016.04.157 ↗
46. Wang X, Nie M, Wang CT, Wang SC, Gao N (2015) Microhardness and corrosion properties of hypoeutectic Al–7Si alloy processed by high-pressure torsion. Mater Des 83:193–202. https://doi.org/10.1016/j.matdes.2015.06.01810.1016/j.matdes.2015.06.018 ↗
47. Rafieazad M, Mohammadi M, Gerlich A, Nasiri A (2021) Enhancing the corrosion properties of additively manufactured AlSi10Mg using friction stir processing. Corros Sci 178:109073. https://doi.org/10.1016/j.corsci.2020.10907310.1016/j.corsci.2020.109073 ↗
48. Moeini G, Sajadifar SV, Engler T, Heider B, Niendorf T, Oechsner M, Böhm S (2020) Effect of friction stir processing on microstructural, mechanical, and corrosion properties of Al-Si12 additive manufactured components. Metals 10(1):8510.3390/met10010085 ↗
49. Dang Z, Qin G, Lin R (2023) A comprehensive study of interfacial microstructure and corrosion behavior of AA2219 to 304SS inertia friction welded joints. Corros Sci 224:111539. https://doi.org/10.1016/j.corsci.2023.11153910.1016/j.corsci.2023.111539 ↗
50. Li X, Zhang Q, Guo Z, Shi T, Yu J, Tang M et al (2015) Fabrication of superhydrophobic surface with improved corrosion inhibition on 6061 aluminum alloy substrate. Appl Surf Sci 342:76–83. https://doi.org/10.1016/j.apsusc.2015.03.04010.1016/j.apsusc.2015.03.040 ↗
51. Zhang J, Klasky M, Letellier BC (2009) The aluminum chemistry and corrosion in alkaline solutions. J Nucl Mater 384:175–189. https://doi.org/10.1016/j.jnucmat.2008.11.00910.1016/j.jnucmat.2008.11.009 ↗
52. Sun B, Wang Q, Pan Y, Liu Z, Du C, Li X (2024) Understanding the non-steady electrochemical mechanism on SCC of 304 SS under applied polarization potentials. Corros Sci 227:111686. https://doi.org/10.1016/j.corsci.2023.11168610.1016/j.corsci.2023.111686 ↗
53. Jorcin JB, Orazem ME, Pébère N, Tribollet B (2006) CPE analysis by local electrochemical impedance spectroscopy. Electrochim Acta 51:1473–1479. https://doi.org/10.1016/j.electacta.2005.02.12810.1016/j.electacta.2005.02.128 ↗
54. Sinhmar S, Dwivedi DK (2018) A study on corrosion behavior of friction stir welded and tungsten inert gas welded AA2014 aluminium alloy. Corros Sci 133:25–35. https://doi.org/10.1016/j.corsci.2018.01.01210.1016/j.corsci.2018.01.012 ↗
55. Xie Y, Meng X, Wang F, Jiang Y, Ma X, Wan L et al (2021) Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering. Corros Sci 192:109800. https://doi.org/10.1016/j.corsci.2021.10980010.1016/j.corsci.2021.109800 ↗
56. Bommersbach P, Alemany-Dumont C, Millet JP, Normand B (2005) Formation and behaviour study of an environment-friendly corrosion inhibitor by electrochemical methods. Electrochim Acta 51:1076–1084. https://doi.org/10.1016/j.electacta.2005.06.00110.1016/j.electacta.2005.06.001 ↗
57. Brug GJ, van den Eeden ALG, Sluyters-Rehbach M, Sluyters JH (1984) The analysis of electrode impedances complicated by the presence of a constant phase element. J Electroanal Chem 176:275–295. https://doi.org/10.1016/S0022-0728(84)80324-110.1016/S0022-0728(84)80324-1 ↗
58. Chen M, Yuan H, Qin X, Wang Y, Zheng H, Yu L et al (2024) Improve corrosion resistance of steel bars in simulated concrete pore solution by the addition of EDTA intercalated CaAl-LDH. Corros Sci 226:111636. https://doi.org/10.1016/j.corsci.2023.11163610.1016/j.corsci.2023.111636 ↗
59. Silva-Magalhães A, De Backer J, Martin J, Bolmsjö G (2019) In-situ temperature measurement in friction stir welding of thick section aluminium alloys. J Manuf Process 39:12–17. https://doi.org/10.1016/j.jmapro.2019.02.00110.1016/j.jmapro.2019.02.001 ↗
60. Fonda RW, Knipling KE, Rowenhorst DJ (2014) EBSD analysis of friction stir weld textures. JOM 66:149–155. https://doi.org/10.1007/s11837-013-0802-110.1007/s11837-013-0802-1 ↗
61. Raturi M, Bhattacharya A (2021) Microstructure and texture correlation of secondary heating assisted dissimilar friction stir welds of aluminum alloys. Mater Sci Eng A 825:141891. https://doi.org/10.1016/j.msea.2021.14189110.1016/j.msea.2021.141891 ↗
62. Zhou C, Sun Q, Qian D, Liu J, Sun J, Sun Z (2022) Effect of deep cryogenic treatment on mechanical properties and residual stress of AlSi10Mg alloy fabricated by laser powder bed fusion. J Mater Process Technol 303:117543. https://doi.org/10.1016/j.jmatprotec.2022.11754310.1016/j.jmatprotec.2022.117543 ↗
63. Chen Y, Sun H, Li Z, Wu Y, Xiao Y, Chen Z et al (2020) Strategy of residual stress determination on selective laser melted al alloy using XRD. Materials (Basel). https://doi.org/10.3390/ma1302045110.3390/ma13020451 ↗
64. Lodh A, Thool K, Samajdar I (2022) X-ray diffraction for the determination of residual stress of crystalline material: an overview. Trans Indian Inst Met 75:983–995. https://doi.org/10.1007/s12666-022-02540-610.1007/s12666-022-02540-6 ↗
65. Rossini NS, Dassisti M, Benyounis KY, Olabi AG (2012) Methods of measuring residual stresses in components. Mater Des 35:572–588. https://doi.org/10.1016/j.matdes.2011.08.02210.1016/j.matdes.2011.08.022 ↗
66. Lemos GVB, Farina AB, Nunes RM, Da CPHCP, Bergmann L, Dos SJF et al (2019) Residual stress characterization in friction stir welds of alloy 625. J Mater Res Technol 8:2528–2537. https://doi.org/10.1016/j.jmrt.2019.02.01110.1016/j.jmrt.2019.02.011 ↗
67. Myhr OR, Grong Ø, Pedersen KO (2010) A combined precipitation, yield strength, and work hardening model for Al–Mg–Si alloys. Metall Mater Trans A Phys Metall Mater Sci 41:2276–2289. https://doi.org/10.1007/s11661-010-0258-710.1007/s11661-010-0258-7 ↗
68. Chen Y, Weyland M, Hutchinson CR (2013) The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys. Acta Mater 61:5877–5894. https://doi.org/10.1016/j.actamat.2013.06.03610.1016/j.actamat.2013.06.036 ↗
69. Bhattacharjee R, Biswas P (2021) Review on thermo-mechanical and material flow analysis of dissimilar friction stir welding. Weld Int 35:295–332. https://doi.org/10.1080/09507116.2021.199225610.1080/09507116.2021.1992256 ↗
70. Chen G, Wu K, Wang Y, Zhu Z, Nie P, Hu F (2023) Effect of rotational speed and feed rate on microstructure and mechanical properties of 6061 aluminum alloy manufactured by additive friction stir deposition. Int J Adv Manuf Technol 127:1165–1176. https://doi.org/10.1007/s00170-023-11527-610.1007/s00170-023-11527-6 ↗
71. Ma ZY, Sharma SR, Mishra RS (2006) Microstructural modification of As-cast Al–Si–Mg alloy by friction stir processing. Metall Mater Trans A Phys Metall Mater Sci 37:3323–3336. https://doi.org/10.1007/BF0258616710.1007/BF02586167 ↗
72. Xu ZZ, Liu CY, Zhang B, Huang HF, Cheng W (2020) Effects of base metal state on the microstructure and mechanical properties of Al–Mg–Si alloy friction stir-welded joints. J Manuf Process 56:248–257. https://doi.org/10.1016/j.jmapro.2020.04.08410.1016/j.jmapro.2020.04.084 ↗
73. Dubaux D, de Weerd MC, Ghanbaja J, Bruyère S, Redjaïmia A, Migot S et al (2024) A novel primitive cubic Al–Fe–Si phase in an Al–0.5Fe–0.2Si (wt%) alloy. Mater Today Commun 38:107877. https://doi.org/10.1016/j.mtcomm.2023.10787710.1016/j.mtcomm.2023.107877 ↗
74. Romanova V, Balokhonov R, Borodina A, Zinovieva O, Dymnich E, Fortuna S et al (2024) Micromechanical study of intragranular stress and strain partitioning in an additively manufactured AlSi10Mg alloy. Thin-Walled Struct 196:111464. https://doi.org/10.1016/j.tws.2023.11146410.1016/j.tws.2023.111464 ↗
75. Fathi P, Rafieazad M, Duan X, Mohammadi M, Nasiri AM (2019) On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering. Corros Sci 157:126–145. https://doi.org/10.1016/j.corsci.2019.05.03210.1016/j.corsci.2019.05.032 ↗
76. Xing X, Duan X, Jiang T, Wang J, Jiang F (2019) Ultrasonic peening treatment used to improve stress corrosion resistance of AlSi10Mg components fabricated using selective laser melting. Metals 9(1):103.10.3390/met9010103 ↗
77. Reddy GM, Rao KS (2010) Enhancement of wear and corrosion resistance of cast A356 aluminium alloy using friction stir processing. Trans Indian Inst Met 63:793–798. https://doi.org/10.1007/s12666-010-0121-y10.1007/s12666-010-0121-y ↗
78. Girelli L, Tocci M, Conte M, Giovanardi R, Veronesi P, Gelfi M et al (2019) Effect of the T6 heat treatment on corrosion behavior of additive manufactured and gravity cast AlSi10Mg alloy. Mater Corros 70:1808–1816. https://doi.org/10.1002/maco.20191089010.1002/maco.201910890 ↗
79. Osório WR, Goulart PR, Garcia A (2008) Effect of silicon content on microstructure and electrochemical behavior of hypoeutectic Al–Si alloys. Mater Lett 62:365–369. https://doi.org/10.1016/j.matlet.2007.05.05110.1016/j.matlet.2007.05.051 ↗
80. Osório WR, Garcia LR, Goulart PR, Garcia A (2007) Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al-9 wt%Si casting alloy. Mater Chem Phys 106:343–349. https://doi.org/10.1016/j.matchemphys.2007.06.01110.1016/j.matchemphys.2007.06.011 ↗