Effect of oxide film on corrosion behavior of NiTi coating prepared by extreme high-speed laser cladding
Source abstract
Abstract
NiTi alloy has excellent corrosion resistance and wear resistance, and is an important protective coating being developed for marine equipment. In this paper, the crack and pore-free high-quality NiTi coatings were firstly synthesized in situ by extreme high-speed laser cladding (EHLA) technology under high temperature oxidation environment. The effects of laser power of EHLA on the temperature field, stress field and coating properties of NiTi coatings were studied by combining finite element calculation and experiments. The results show that a corrosion-resistant and wear-resistant TiO2 oxide film was generated in situ on the coating surface during EHLA process. Furthermore, the denser oxide film can be obtained by proper annealing treatment, and the wear resistance and corrosion resistance of the sample can be further improved. This provides a feasible fashion for EHLA to in situ synthesize wear-resistant and corrosion-resistant alloy coatings with low defects.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Xiao M, Gao H, Sun L et al (2021) Microstructure and mechanical properties of Fe-based amorphous alloy coatings prepared by ultra-high speed laser cladding. Mater Lett 297:130002. https://doi.org/10.1016/j.matlet.2021.13000210.1016/j.matlet.2021.130002 ↗
2. Schopphoven T, Gasser A, Wissenbach K, Poprawe R (2016) Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying. J Laser Appl 28:022501. https://doi.org/10.2351/1.494391010.2351/1.4943910 ↗
3. Wang X, Xing Z, Liu Y et al (2019) Composite ceramic-Ni60 coating fabricated via supersonic plasma spraying. Chin J Phys 61:72–79. https://doi.org/10.1016/j.cjph.2019.08.01210.1016/j.cjph.2019.08.012 ↗
4. Xu G, Kutsuna M, Liu Z, Zhang H (2006) Characteristics of Ni-based coating layer formed by laser and plasma cladding processes. Mater Sci Eng A 417:63–72. https://doi.org/10.1016/j.msea.2005.08.19210.1016/j.msea.2005.08.192 ↗
5. Wang Y, Liu X-B, Liu Y-F et al (2020) Microstructure and tribological performance of Ni60-based composite coatings on Ti6Al4V alloy with different Ti3SiC2 ceramic additions by laser cladding. Ceram Int 46:28996–29010. https://doi.org/10.1016/j.ceramint.2020.08.07110.1016/j.ceramint.2020.08.071 ↗
6. Zhang M, Li Y, Feng Y et al (2021) Studies on different oxidation behaviors of TiAlN on titanium alloy and stainless steel under thermal cycling. Corros Sci 192:109865. https://doi.org/10.1016/j.corsci.2021.10986510.1016/j.corsci.2021.109865 ↗
7. Gu J-L, Lu S-Y, Shao Y, Yao K-F (2021) Segregating the homogeneous passive film and understanding the passivation mechanism of Ti-based metallic glasses. Corros Sci 178:109078. https://doi.org/10.1016/j.corsci.2020.10907810.1016/j.corsci.2020.109078 ↗
8. Silva DD, Campanelli LC, Bergmann L et al (2020) On the stability of the passive Ti-6Al-4V film of friction stir welds with stainless steel: effect of not native metal species. Electrochimica Acta 358:136900. https://doi.org/10.1016/j.electacta.2020.13690010.1016/j.electacta.2020.136900 ↗
9. Liu Q, Pang M, Chen J et al (2021) Microstructure and properties characterization of Ti-containing Ni60/Graphite self-lubricating composite coatings applied on 300M ultra-high strength steel by laser cladding. Mater Chem Phys 266:124554. https://doi.org/10.1016/j.matchemphys.2021.12455410.1016/j.matchemphys.2021.124554 ↗
10. Wang Q, Zhang H, Yoshida H et al (2022) Time evolution of the passivation behavior of Ti-6Al-4V in 0.5 M sulfuric acid. J Electrochem Soc 169:10550510.1149/1945-7111/ac99a7 ↗
11. Surface treatment of NiTi for medical applications: minimally invasive therapy & allied technologies: Vol 13, No 4. https://www.tandfonline.com/doi/abs/https://doi.org/10.1080/13645700410020278. Accessed 1 Jun 202310.1080/13645700410020278 ↗
12. Shao AL, Cheng Y, Zhou Y et al (2013) Electrochemistry properties of multilayer TiN/Ti coatings on NiTi alloy for cardiac occluder application. Surf Coat Technol 228:S257–S261. https://doi.org/10.1016/j.surfcoat.2012.05.12910.1016/j.surfcoat.2012.05.129 ↗
13. Wang S, Li Y, Zhao T (2012) Effect of thermal oxidation on the surface characteristics and corrosion behavior of a Ta-implanted Ti-50.6Ni shape memory alloy. Int J Miner Metall Mater 19:1134–1141. https://doi.org/10.1007/s12613-012-0682-310.1007/s12613-012-0682-3 ↗
14. Starosvetsky D, Gotman I (2001) TiN coating improves the corrosion behavior of superelastic NiTi surgical alloy. Surf Coat Technol 148:268–276. https://doi.org/10.1016/S0257-8972(01)01356-110.1016/S0257-8972(01)01356-1 ↗
15. Li L, Shen F, Zhou Y, Tao W (2019) Comparative study of stainless steel AISI 431 coatings prepared by extreme-high-speed and conventional laser cladding. J Laser Appl 31:042009. https://doi.org/10.2351/1.509437810.2351/1.5094378 ↗
16. Xu P, Lin C, Zhou C, Yi X (2014) Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings. Surf Coat Technol 238:9–14. https://doi.org/10.1016/j.surfcoat.2013.10.02810.1016/j.surfcoat.2013.10.028 ↗
17. Shen F, Tao W, Li L et al (2020) Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding. Appl Surf Sci 517:146085. https://doi.org/10.1016/j.apsusc.2020.14608510.1016/j.apsusc.2020.146085 ↗
18. Xu Q-L, Zhang Y, Liu S-H et al (2020) High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process. Surf Coat Technol 398:126093. https://doi.org/10.1016/j.surfcoat.2020.12609310.1016/j.surfcoat.2020.126093 ↗
19. EHLA: extreme high‐speed laser material deposition. https://onlinelibrary.wiley.com/doi/epdf/https://doi.org/10.1002/latj.201700020. Accessed 1 Jun 202310.1002/latj.201700020 ↗
20. Yuan W, Li R, Chen Z et al (2021) A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. Surf Coat Technol 405:126582. https://doi.org/10.1016/j.surfcoat.2020.12658210.1016/j.surfcoat.2020.126582 ↗
21. Chen L, Zhang X, Wu Y et al (2022) Effect of surface morphology and microstructure on the hot corrosion behavior of TiC/IN625 coatings prepared by extreme high-speed laser cladding. Corros Sci 201:110271. https://doi.org/10.1016/j.corsci.2022.11027110.1016/j.corsci.2022.110271 ↗
22. Liu M-X, Li Z, Chang G-R, Yin Z-F, Xiu-Ping Zhang Y, Meng Y-Y X, Ma F, Ke-Wei X (2022) An investigation of the surface quality and corrosion resistance of laser remelted and extreme high-speed laser cladded Ni-based alloy coating. Int J Electrochem Sci 17:220537. https://doi.org/10.20964/2022.05.5110.20964/2022.05.51 ↗
23. Zhang X, Li S, Sun W et al (2021) Study on the corrosion behavior of copper coupled with TiO2 with different crystal structures. Corros Sci 183:109352. https://doi.org/10.1016/j.corsci.2021.10935210.1016/j.corsci.2021.109352 ↗
24. Piekarska W, Kubiak M (2011) Three-dimensional model for numerical analysis of thermal phenomena in laser–arc hybrid welding process. Int J Heat Mass Transf 54:4966–4974. https://doi.org/10.1016/j.ijheatmasstransfer.2011.07.01010.1016/j.ijheatmasstransfer.2011.07.010 ↗
25. Rahman Chukkan J, Vasudevan M, Muthukumaran S et al (2015) Simulation of laser butt welding of AISI 316L stainless steel sheet using various heat sources and experimental validation. J Mater Process Technol 219:48–59. https://doi.org/10.1016/j.jmatprotec.2014.12.00810.1016/j.jmatprotec.2014.12.008 ↗
26. Aghaee Attar M, Ghoreishi M, Malekshahi Beiranvand Z (2020) Prediction of weld geometry, temperature contour and strain distribution in disk laser welding of dissimilar joining between copper & 304 stainless steel. Optik 219:165288. https://doi.org/10.1016/j.ijleo.2020.16528810.1016/j.ijleo.2020.165288 ↗
27. Kong F, Ma J, Kovacevic R (2011) Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process. J Mater Process Technol 211:1102–1111. https://doi.org/10.1016/j.jmatprotec.2011.01.01210.1016/j.jmatprotec.2011.01.012 ↗
28. Sun GF, Wang ZD, Lu Y et al (2018) Numerical and experimental investigation of thermal field and residual stress in laser-MIG hybrid welded NV E690 steel plates. J Manuf Process 34:106–120. https://doi.org/10.1016/j.jmapro.2018.05.02310.1016/j.jmapro.2018.05.023 ↗
29. Kong F, Kovacevic R (2010) 3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint. J Mater Process Technol 210:941–950. https://doi.org/10.1016/j.jmatprotec.2010.02.00610.1016/j.jmatprotec.2010.02.006 ↗
30. A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel-Science Direct. https://www.sciencedirect.com/science/article/pii/S0308016113001683. Accessed 1 Jun 2023
31. Zhang Y, Gao X, Liang X et al (2020) Effect of laser remelting on the microstructure and corrosion property of the arc-sprayed AlFeNbNi coatings. Surf Coat Technol 398:126099. https://doi.org/10.1016/j.surfcoat.2020.12609910.1016/j.surfcoat.2020.126099 ↗
32. Khodabakhshi F, Farshidianfar MH, Gerlich AP et al (2020) Effects of laser additive manufacturing on microstructure and crystallographic texture of austenitic and martensitic stainless steels. Addit Manuf 31:100915. https://doi.org/10.1016/j.addma.2019.10091510.1016/j.addma.2019.100915 ↗
33. Biesinger MC, Lau LWM, Gerson AR, Smart RStC, (2010) Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn. Appl Surf Sci 257:887–898. https://doi.org/10.1016/j.apsusc.2010.07.08610.1016/j.apsusc.2010.07.086 ↗
34. Chen L, Richter B, Zhang X et al (2020) Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing. Addi Manuf 32:101013. https://doi.org/10.1016/j.addma.2019.10101310.1016/j.addma.2019.101013 ↗
35. Gu D, Zhang H, Dai D et al (2020) Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting. Corros Sci 170:108657. https://doi.org/10.1016/j.corsci.2020.10865710.1016/j.corsci.2020.108657 ↗
36. Cao M, Liu L, Yu Z et al (2019) Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment. J Mater Sci Technol 35:651–659. https://doi.org/10.1016/j.jmst.2018.09.06010.1016/j.jmst.2018.09.060 ↗
37. Xu X, Du JL, Luo KY et al (2021) Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing. Surf Coat Technol 422:127500. https://doi.org/10.1016/j.surfcoat.2021.12750010.1016/j.surfcoat.2021.127500 ↗
38. Influence of solution heat treatment on the microstructural evolution and mechanical behavior of 60NiTi-ScienceDirect. https://www.sciencedirect.com/science/article/pii/S092583881833679X. Accessed 1 Jun 2023
39. Effects of solution and aging treatments on corrosion resistance of as-cast 60NiTi Alloy | SpringerLink. https://link.springer.com/article/https://doi.org/10.1007/s11665-016-2402-z. Accessed 1 Jun 202310.1007/s11665-016-2402-z ↗