Influence of shot peening on the microstructure and high-temperature tensile properties of a powder metallurgy Ni-based superalloy
Source abstract
Abstract
Shot peening can significantly improve the fatigue resistance of superalloys, but the effect on the tensile properties is more controversial. In this work, the surface morphology, subsurface microstructure, and high-temperature tensile properties of FGH4113A Ni-based powder metallurgy superalloy were systematically investigated at different shot peening intensities (0.1, 0.2, and 0.3 mmA) and shot peening coverages (100% and 200%). The results show that the surface roughness, surface microhardness, and thickness of the subsurface plastic deformation layer gradually increase with increasing shot peening intensity and shot peening coverage. Meanwhile, the percentage of small-angle grain boundaries from 0.04% quickly increases to about 35%. When the shot peening intensity increases to 0.3 mmA, it is accompanied by more defects such as peeling and surface layer peeling on the surface of the superalloy. The shot peening intensity and coverage also have an influence on the tensile properties of the FGH4113A superalloy at 700 °C. When the shot peening condition was 0.2 mmA-100%, the tensile strength, yield strength, and elongation of the superalloy at 700 °C were 1452 MPa, 1123 MPa, and 15.8%, respectively, which were 27 MPa, 29 MPa, and 4% higher than those before shot peening. When the shot peening intensity increased to 0.3 mmA, the yield strength decreased by nearly 60 MPa compared to shot peening at 0.2 mmA-100%. The evolution of tensile performance under different shot peening conditions was also analyzed and provided theoretical and data support for the selection of shot peening parameters.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Sun B, Zhang TB, Song L, Zhang L (2022) Microstructural evolution and dynamic recrystallization of a nickel-based superalloy PM EP962NP during hot deformation at 1150 °C. J Mate Res Technol 18:1436–1449. https://doi.org/10.1016/j.jmrt.2022.03.03310.1016/j.jmrt.2022.03.033 ↗
2. Dong CL, Yang SK, Peng ZC (2021) Effect of shot peening on notched fatigue performance of powder metallurgy udimet 720Li superalloy. Intermetallics 135:107226. https://doi.org/10.1016/j.intermet.2021.10722610.1016/j.intermet.2021.107226 ↗
3. Yuan XJ, Qiu HF, Zeng FQ, Luo WP, Li H, Wang XP, Guan N, Cui FF (2022) Microstructural evolution and mechanical properties of Inconel 625 superalloy fabricated by pulsed microplasma rapid additive manufacturing. J Manuf Process 77:63–74. https://doi.org/10.1016/j.jmapro.2022.03.00810.1016/j.jmapro.2022.03.008 ↗
4. Yang J, Liu DX, Zhang XH, Liu MX, Zhao WD, Liu CS (2020) The effect of ultrasonic surface rolling process on the fretting fatigue property of GH4169 superalloy. Int J Fatigue 133:105373. https://doi.org/10.1016/j.ijfatigue.2019.10537310.1016/j.ijfatigue.2019.105373 ↗
5. Wang X, Xu CL, Hu DY, Li CZ, Liu CG, Tang ZH (2021) Effect of ultrasonic shot peening on surface integrity and fatigue performance of single-crystal superalloy. J Mater Process Tech 296:117209. https://doi.org/10.1016/j.jmatprotec.2021.11720910.1016/j.jmatprotec.2021.117209 ↗
6. Ding RG, Knaggs C, Li HY, Li YG, Bowen P (2020) Characterization of plastic deformation induced by machining in a Ni-based superalloy. Mater Sci Eng A 778:139104. https://doi.org/10.1016/j.msea.2020.13910410.1016/j.msea.2020.139104 ↗
7. Geng YX, Dong X, Wang KD, Mei XS, Tang ZH, Duan WQ (2020) Evolutions of microstructure, phase, microhardness, and residual stress of multiple laser shock peened Ni-based single crystal superalloy after short-term thermal exposure. Opt laser Technol 123:105917. https://doi.org/10.1016/j.optlastec.2019.10591710.1016/j.optlastec.2019.105917 ↗
8. Wang YC, Roy S, Choi H, Rimon T (2022) Cracking suppression in additive manufacturing of hard-to-weld nickel-based superalloy through layer-wise ultrasonic impact peening. J Manuf Process 80:320–327. https://doi.org/10.1016/j.jmapro.2022.05.04110.1016/j.jmapro.2022.05.041 ↗
9. Orozco-Caballero A, Jackson T, Da Fonseca JQ (2021) High-resolution digital image correlation study of the strain localization during loading of a shot-peened RR1000 nickel-based superalloy. Acta Mater 220:117306. https://doi.org/10.1016/j.actamat.2021.11730610.1016/j.actamat.2021.117306 ↗
10. Hu DY, Tian TY, Wang X, Mao JX, Xiao ZX, Wang RQ (2021) Surface hardening analysis for shot peened GH4720Li superalloy using a DEM-FEM coupling RV simulation method. Int J Mech Sci 209:106689. https://doi.org/10.1016/j.ijmecsci.2021.10668910.1016/j.ijmecsci.2021.106689 ↗
11. Velicheti D, Nagy PB, Hassan W (2021) Residual stress and cold work assessment in shot-peened IN718 using a dual-mode electromagnetic technique. NDT&E Int 121:102463. https://doi.org/10.3139/146.11063010.3139/146.110630 ↗
12. Yu CL, Huang ZY, Zhang Z, Wang J, Shen JB, Xu ZP (2022) Effects of sandblasting and HIP on very high cycle fatigue performance of SLM-fabricated IN718 superalloy. J Mater Res Technol 18:29–43. https://doi.org/10.1016/j.jmrt.2022.02.07710.1016/j.jmrt.2022.02.077 ↗
13. Hu XL, Yang YQ, Zhao JB, Lu Y, Wu JJ, Qiao HC (2021) Surface integrity evolution of a Ni-based single crystal superalloy by laser shock peening. Appl Surf Sci Adv 6:100183. https://doi.org/10.1016/j.apsadv.2021.10018310.1016/j.apsadv.2021.100183 ↗
14. Zhou JQ, Sun ZD (2022) Numerical characterization of shot peening induced work hardening gradient and verification based on FEM analysis. Int J Solids Struct 244–245:111586. https://doi.org/10.1016/j.ijsolstr.2022.11158610.1016/j.ijsolstr.2022.111586 ↗
15. Wu DX, Yao CF, Zhang DH (2018) Surface characterization and fatigue evaluation in GH4169 superalloy: comparing results after finish turning: shot peening and surface polishing treatments. Int J Fatigue 113:222–235. https://doi.org/10.1016/j.ijfatigue.2018.04.00910.1016/j.ijfatigue.2018.04.009 ↗
16. Bogachev I, Knowles KM, Gibson GJ (2020) Electron backscattered diffraction analysis of cold work in a shot peened single crystal nickel superalloy. Materialia 14:100860. https://doi.org/10.1016/j.mtla.2020.10086010.1016/j.mtla.2020.100860 ↗
17. Hu DY, Gao Y, Meng FC, Song J, Wang RQ (2018) Experimental and numerical analysis of microstructures and stress states of shot-peened GH4169 superalloys. Metall Mater Trans A 49:1397–1409. https://doi.org/10.1007/s11661-018-4493-710.1007/s11661-018-4493-7 ↗
18. Wang C, Lai YB, Wang L, Wang CL (2020) Dislocation-based study on the influences of shot peening on fatigue resistance. Sur. Coat Tech 383:125247. https://doi.org/10.1016/j.surfcoat.2019.12524710.1016/j.surfcoat.2019.125247 ↗
19. Maleki E, Bagherifard S, Unal O, Bandini M, Farrahi GH, Guagliano M (2021) Introducing gradient severe shot peening as a novel mechanical surface treatment. Sci Rep 11:22035. https://doi.org/10.1038/s41598-021-01152-210.1038/s41598-021-01152-2 ↗
20. Child DJ, West GD, Thomson RC (2011) Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques. Acta Mater 59:4825–4834. https://doi.org/10.1016/j.actamat.2011.04.02510.1016/j.actamat.2011.04.025 ↗
21. Chen M, Xing SL, Li JS, He JS, Lu Y, Jiang CH, Ji V (2021) Surface residual stress and microstructure evolutions of hastelloy X alloy after severe shot peening. Vacuum 187:110136. https://doi.org/10.1016/j.vacuum.2021.11013610.1016/j.vacuum.2021.110136 ↗
22. Kattoura M, Mannava SR, Qian D, Vasudevan VK (2017) Effect of laser shock peening on elevated temperature residual stress, microstructure and fatigue behavior of ATI 718Plus alloy. Int J Fatigue 104:366–378. https://doi.org/10.1016/j.ijfatigue.2017.08.00610.1016/j.ijfatigue.2017.08.006 ↗
23. Klotz T, Delbergue D, Bocher P, Lévesque M, Brochu M (2018) Surface characteristics and fatigue behavior of shot peened Inconel 718. Int J Fatigue 110:10–21. https://doi.org/10.1016/j.ijfatigue.2018.01.00510.1016/j.ijfatigue.2018.01.005 ↗
24. Wang YC, Shi J (2020) Recrystallization behavior and tensile properties of laser metal deposited Inconel 718 upon in-situ ultrasonic impact peening and heat treatment. Mater Sci Eng A 786:139434. https://doi.org/10.1016/j.msea.2020.13943410.1016/j.msea.2020.139434 ↗
25. Chen L, Sun YZ, Li L, Ren XD (2020) Microstructural evolution and mechanical properties of selective laser melted a nickel-based superalloy after post treatment. Mater Sci Eng A 792:139649. https://doi.org/10.1016/j.msea.2020.13964910.1016/j.msea.2020.139649 ↗
26. Zeng W, Yang J (2020) Quantitative representation of mechanical behavior of the surface hardening layer in shot-peened nickel-based superalloy. Materials 13:1437. https://doi.org/10.3390/ma1306143710.3390/ma13061437 ↗
27. Kumar S, Rao GS, Chattopadhyay K, Mahobia GS, Srinivas N, Singh V (2014) Effect of surface nanostructure on tensile behavior of superalloy IN718. Mater Des 62:76–82. https://doi.org/10.1016/j.matdes.2014.04.08410.1016/j.matdes.2014.04.084 ↗
28. Singh V, Pandey V, Kumar S, Srinivas NC, Chattopadhyay K (2016) Effect of ultrasonic shot peening on surface microstructure and fatigue behavior of structural alloys. Trans Indian Inst Met 69:295–301. https://doi.org/10.1007/s12666-015-0771-x10.1007/s12666-015-0771-x ↗
29. Chandrasekar G, Kailasanathan C, Vasundara M (2018) Investigation on un-peened and laser shock peened dissimilar weldments of Inconel 600 and AISI 316L fabricated using activated-TIG welding technique. J Manuf Process 35:466–478. https://doi.org/10.1016/j.jmapro.2018.09.00410.1016/j.jmapro.2018.09.004 ↗
30. Wu LJ, Luo KY, Liu Y, Cui CY, Xue W, Lu JZ (2018) Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures. Appl Surf Sci 431:122–134. https://doi.org/10.1016/j.apsusc.2017.05.20210.1016/j.apsusc.2017.05.202 ↗
31. Amini S, Dadkhah M, Teimouri R (2017) Study on laser shock penning of Incoloy 800 super alloy. Optik 140:308–316. https://doi.org/10.1016/j.ijleo.2017.04.06610.1016/j.ijleo.2017.04.066 ↗
32. Liu XL, Zhao K (2014) Tensile and impact behavior and fracture characteristics of FGH96 powder metallurgy superalloy. Appl Mech Mater 556–562:389–394. https://doi.org/10.4028/www.scientific.net/AMM.556-562.38910.4028/www.scientific.net/AMM.556-562.389 ↗
33. Zhao XH, Zhou HY, Liu Y (2018) Effect of shot peening on the fatigue properties of nickel-based superalloy GH4169 at high temperature. Results Phys 11:452–460. https://doi.org/10.1016/j.rinp.2018.09.04710.1016/j.rinp.2018.09.047 ↗
34. Kumar D, Idapalapati S, Wang W, Child DJ, Haubold T, Wong CC (2019) Microstructure-mechanical property correlation in shot peened and vibro-peened Ni-based superalloy. J Mater Process Tech 267:215–229. https://doi.org/10.1016/j.jmatprotec.2018.12.00710.1016/j.jmatprotec.2018.12.007 ↗
35. Foss BJ, Gray S, Hardy MC, Stekovic S, McPhail DS, Shollock BA (2013) Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000. Acta Mater 61:2548–2559. https://doi.org/10.1016/j.actamat.2013.01.03110.1016/j.actamat.2013.01.031 ↗
36. Valiev R (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat Mater 3:511–516. https://doi.org/10.1038/nmat118010.1038/nmat1180 ↗
37. Lu GX, Liu JD, Qiao HC, Zhou YZ, Jin T, Zhao JB, Sun XF, Hu ZQ (2017) Effect of laser shock on tensile deformation behavior of a single crystal nickel-base superalloy. Mater Sci Eng A 686:46–53. https://doi.org/10.1016/j.msea.2017.01.03910.1016/j.msea.2017.01.039 ↗
38. Tian T, Hao ZB, Ge CC, Li XG, Peng SQ, Jia CL (2020) Effects of stress and temperature on creep behavior of a new third-generation powder metallurgy superalloy FGH100L. Mater Sci Eng A 776:139007. https://doi.org/10.1016/j.msea.2020.13900710.1016/j.msea.2020.139007 ↗
39. Wang JJ, Wen ZX, Zhang XH, Zhao YC, Yue ZF (2019) Effect mechanism and equivalent model of surface roughness on fatigue behavior of nickel-based single crystal superalloy. Int J Fatigue 125:101–111. https://doi.org/10.1016/j.ijfatigue.2019.03.04110.1016/j.ijfatigue.2019.03.041 ↗