Research of the effects of laser power variation on the properties of laser cladding Ni45/Cr3C2/MoS2 self-lubricating wear-resistant coatings on the surface of 300M ultra-high-strength steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Surface Treatment and Coatings · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Liu YG, Li MQ, Luo J (2013) The modelling of dynamic recrystallization in the isothermal compression of 300M steel. Mater Sci Eng A 574:1–8. https://doi.org/10.1016/j.msea.2013.03.01110.1016/j.msea.2013.03.011 ↗
2. Liu J, Li J, Cheng X, Wang H (2017) Effect of dilution and macrosegregation on corrosion resistance of laser clad AerMet100 steel coating on 300M steel substrate. Surf Coat Technol 325:352–359. https://doi.org/10.1016/j.surfcoat.2017.04.03510.1016/j.surfcoat.2017.04.035 ↗
3. Liu F, Lin X, Song M et al (2016) Effect of tempering temperature on microstructure and mechanical properties of laser solid formed 300M steel. J Alloy Compd 689:225–232. https://doi.org/10.1016/j.jallcom.2016.07.27610.1016/j.jallcom.2016.07.276 ↗
4. Nascimento MP, Souza RC, Pigatin WL, Voorwald HJC (2001) Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel. Int J Fatigue 23:607–618. https://doi.org/10.1016/S0142-1123(01)00015-910.1016/S0142-1123(01)00015-9 ↗
5. Sabelkin V, Misak H, Mall S (2016) Fatigue behavior of Zn–Ni and Cd coated AISI 4340 steel with scribed damage in saltwater environment. Int J Fatigue 90:158–165. https://doi.org/10.1016/j.ijfatigue.2016.04.02710.1016/j.ijfatigue.2016.04.027 ↗
6. Gong T, Yao P, Zuo X et al (2016) Influence of WC carbide particle size on the microstructure and abrasive wear behavior of WC–10Co–4Cr coatings for aircraft landing gear. Wear 362–363:135–145. https://doi.org/10.1016/j.wear.2016.05.02210.1016/j.wear.2016.05.022 ↗
7. Li K, Liang J, Zhou J (2023) Effects of WS2 and Cr3C2 addition on microstructural evolution and tribological properties of the self-lubricating wear-resistant CoCrFeNiMo composite coatings prepared by laser cladding. Opt Laser Technol 163:109442. https://doi.org/10.1016/j.optlastec.2023.10944210.1016/j.optlastec.2023.109442 ↗
8. Wang K, Liu W, Li X et al (2024) Effect of hot isostatic pressing on microstructure and properties of high chromium K648 superalloy manufacturing by extreme high-speed laser metal deposition. J Market Res 28:3951–3959. https://doi.org/10.1016/j.jmrt.2023.12.28010.1016/j.jmrt.2023.12.280 ↗
9. Chen W, Peng Y, Wang Y et al (2023) Research on high-temperature friction and wear performances of Stellite 12 laser cladding layer against coated boron steels. Wear 520–521:204665. https://doi.org/10.1016/j.wear.2023.20466510.1016/j.wear.2023.204665 ↗
10. Da Sun S, Fabijanic D, Barr C et al (2018) In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates. Surf Coat Technol 333:210–219. https://doi.org/10.1016/j.surfcoat.2017.10.08010.1016/j.surfcoat.2017.10.080 ↗
11. Liu Q, Pang M, Chen J et al (2021) Microstructure and properties characterization of Ti-containing Ni60/Graphite self-lubricating composite coatings applied on 300M ultra-high strength steel by laser cladding. Mater Chem Phys 266:124554. https://doi.org/10.1016/j.matchemphys.2021.12455410.1016/j.matchemphys.2021.124554 ↗
12. Li Y, Shi Y, Jiang G et al (2024) Effect of WC on microstructure, molten pool and properties of Ni based coatings by multi-layer laser cladding. Opt Laser Technol 174:110612. https://doi.org/10.1016/j.optlastec.2024.11061210.1016/j.optlastec.2024.110612 ↗
13. Chen L, Yu T, Chen X et al (2022) Process optimization, microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatings. Opt Laser Technol 152:108129. https://doi.org/10.1016/j.optlastec.2022.10812910.1016/j.optlastec.2022.108129 ↗
14. Feldshtein E, Devojno O, Wojciechowski S et al (2023) Tribologic behavior and surface integrity of NAB bronze coatings reinforced with WC and Cr3C2 carbides using ytterbium fiber laser. Tribol Int 188:108784. https://doi.org/10.1016/j.triboint.2023.10878410.1016/j.triboint.2023.108784 ↗
15. Sun S, Fu H, Ping X et al (2018) Reinforcing behavior and microstructure evolution of NbC in laser cladded Ni45 coating. Appl Surf Sci 455:160–170. https://doi.org/10.1016/j.apsusc.2018.05.19910.1016/j.apsusc.2018.05.199 ↗
16. Chen L, Zhao Y, Chen X et al (2021) Repair of spline shaft by laser-cladding coarse TiC reinforced Ni-based coating: Process, microstructure and properties. Ceram Int 47:30113–30128. https://doi.org/10.1016/j.ceramint.2021.07.18910.1016/j.ceramint.2021.07.189 ↗
17. Bannaravuri PK, Birru AK, Dixit US (2020) Effect of laser surface melting on surface integrity of Al−4.5Cu composites reinforced with SiC and MoS2. Trans Nonferrous Met Soc China 30:344–362. https://doi.org/10.1016/S1003-6326(20)65217-710.1016/S1003-6326(20)65217-7 ↗
18. Kulka M, Mikolajczak D, Makuch N et al (2016) Wear resistance improvement of austenitic 316L steel by laser alloying with boron. Surf Coat Technol 291:292–313. https://doi.org/10.1016/j.surfcoat.2016.02.05810.1016/j.surfcoat.2016.02.058 ↗
19. Zhang D, Zhang X (2005) Laser cladding of stainless steel with Ni–Cr3C2 and Ni–WC for improving erosive–corrosive wear performance. Surf Coat Technol 190:212–217. https://doi.org/10.1016/j.surfcoat.2004.03.01810.1016/j.surfcoat.2004.03.018 ↗
20. Venkatesh L, Samajdar I, Tak M et al (2015) Microstructure and phase evolution in laser clad chromium carbide-NiCrMoNb. Appl Surf Sci 357:2391–2401. https://doi.org/10.1016/j.apsusc.2015.09.26010.1016/j.apsusc.2015.09.260 ↗
21. Yang M-S, Liu X-B, Fan J-W et al (2012) Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating. Appl Surf Sci 258:3757–3762. https://doi.org/10.1016/j.apsusc.2011.12.02110.1016/j.apsusc.2011.12.021 ↗
22. Cao S, Liang J, Wang L, Zhou J (2021) Effects of NiCr intermediate layer on microstructure and tribological property of laser cladding Cr3C2 reinforced Ni60A-Ag composite coating on copper alloy. Opt Laser Technol 142:106963. https://doi.org/10.1016/j.optlastec.2021.10696310.1016/j.optlastec.2021.106963 ↗
23. Hua K, Ding H, Sun L et al (2024) Enhancing high-temperature fretting wear resistance of TC21 titanium alloys by laser cladding self-lubricating composite coatings. J Alloy Compd 977:173360. https://doi.org/10.1016/j.jallcom.2023.17336010.1016/j.jallcom.2023.173360 ↗
24. Feng L, Jin G, Cui X et al (2024) In-situ synthesis and wear mechanism of Ni- based self-lubricating composite coating with a dense continuous metal sulfide layer prepared by laser cladding. Surf Coat Technol 478:130443. https://doi.org/10.1016/j.surfcoat.2024.13044310.1016/j.surfcoat.2024.130443 ↗
25. Xu TZ, Zhang S, Wang ZY et al (2022) Wear behavior of graphite self-lubricating Babbitt alloy composite coating on 20 steel prepared by laser cladding. Eng Fail Anal 141:106698. https://doi.org/10.1016/j.engfailanal.2022.10669810.1016/j.engfailanal.2022.106698 ↗
26. Torres H, Vuchkov T, Slawik S et al (2018) Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 °C. Wear 408–409:22–33. https://doi.org/10.1016/j.wear.2018.05.00110.1016/j.wear.2018.05.001 ↗
27. Piasecki A, Kulka M, Kotkowiak M (2016) Wear resistance improvement of 100CrMnSi6-4 bearing steel by laser boriding using CaF2 self-lubricating addition. Tribol Int 97:173–191. https://doi.org/10.1016/j.triboint.2016.01.02810.1016/j.triboint.2016.01.028 ↗
28. Wang L, Zhou J, Xin B et al (2017) Phase transformation and tribological properties of Ag-MoO3 contained NiCrAlY based composite coatings fabricated by laser cladding. Opt Laser Technol 93:79–86. https://doi.org/10.1016/j.optlastec.2017.02.00610.1016/j.optlastec.2017.02.006 ↗
29. Yuan J, Yao Y, Zhuang M et al (2021) Effects of Cu and WS2 addition on microstructural evolution and tribological properties of self-lubricating anti-wear coatings prepared by laser cladding. Tribol Int 157:106872. https://doi.org/10.1016/j.triboint.2021.10687210.1016/j.triboint.2021.106872 ↗
30. Zhang H (2023) A comparative study on microstructure and tribological characteristics of Mo2FeB2/WC self-lubricating composite coatings with addition of WS2, MoS2, and h-BN. Mater Des 225:0264–1275. https://doi.org/10.1016/j.matdes.2022.11158110.1016/j.matdes.2022.111581 ↗
31. Liu J, Shi Y (2021) Microstructure and wear behavior of laser-cladded Ni-based coatings decorated by graphite particles. Surf Coat Technol 412:127044. https://doi.org/10.1016/j.surfcoat.2021.12704410.1016/j.surfcoat.2021.127044 ↗
32. Sun G, Tong Z, Fang X et al (2016) Effect of scanning speeds on microstructure and wear behavior of laser-processed NiCr–Cr3C2–MoS2–CeO2 on 38CrMoAl steel. Opt Laser Technol 77:80–90. https://doi.org/10.1016/j.optlastec.2015.08.00810.1016/j.optlastec.2015.08.008 ↗
33. Dhanasekaran S, Gnanamoorthy R (2007) Dry sliding friction and wear characteristics of Fe–C–Cu alloy containing molybdenum di sulphide. Mater Des 28:1135–1141. https://doi.org/10.1016/j.matdes.2006.01.03010.1016/j.matdes.2006.01.030 ↗
34. Wang Q, Li X, Niu W et al (2020) Effect of MoS2 content on microstructure and properties of supersonic plasma sprayed Fe-based composite coatings. Surf Coat Technol 391:125699. https://doi.org/10.1016/j.surfcoat.2020.12569910.1016/j.surfcoat.2020.125699 ↗
35. Torres H, Vuchkov T, Rodríguez Ripoll M, Prakash B (2018) Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications. Tribol Int 126:153–165. https://doi.org/10.1016/j.triboint.2018.05.01510.1016/j.triboint.2018.05.015 ↗
36. Qiu T, Pan S, Fan C et al (2020) Effect of Ni-coated MoS2 on microstructure and tribological properties of (Cu−10Sn)-based composites. Trans Nonferrous Met Soc China 30:2480–2490. https://doi.org/10.1016/S1003-6326(20)65394-810.1016/S1003-6326(20)65394-8 ↗
37. Shi L, Sun C, Liu W (2008) Electrodeposited nickel–cobalt composite coating containing MoS2. Appl Surf Sci 254:6880–6885. https://doi.org/10.1016/j.apsusc.2008.04.08910.1016/j.apsusc.2008.04.089 ↗
38. Ming Q, Lim LC, Chen ZD (1998) Laser cladding of nickel-based hardfacing alloys. Surf Coat Technol 106:174–182. https://doi.org/10.1016/S0257-8972(98)00524-610.1016/S0257-8972(98)00524-6 ↗
39. Su Z, Li J, Shi Y et al (2023) Effect of process parameters on microstructure and tribological properties of Ni60A/Cr3C2 laser cladding on 60Si2Mn steel. Surf Coat Technol 473:130005. https://doi.org/10.1016/j.surfcoat.2023.13000510.1016/j.surfcoat.2023.130005 ↗
40. Torres H, Slawik S, Gachot C et al (2018) Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications. Surf Coat Technol 337:24–34. https://doi.org/10.1016/j.surfcoat.2017.12.06010.1016/j.surfcoat.2017.12.060 ↗
41. Yuan W, Li R, Chen Z et al (2021) A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. Surf Coat Technol 405:126582. https://doi.org/10.1016/j.surfcoat.2020.12658210.1016/j.surfcoat.2020.126582 ↗
42. Wang P, Pang M, Gao L (2024) Research on the performance of nickel-based WC/MoS2 self-lubricating composite coatings laser cladding on 300 M ultra-high-strength steel surface. Mater Today Commun 39:109334. https://doi.org/10.1016/j.mtcomm.2024.10933410.1016/j.mtcomm.2024.109334 ↗
43. Shi Z-M, Pang M (2023) Study on the performance of laser nitriding in situ enhanced Co12/TC4 composite Ag self-lubricating coating on TC4 surface. J Mater Sci 58:18207–18227. https://doi.org/10.1007/s10853-023-09213-910.1007/s10853-023-09213-9 ↗
44. Ren Y, Zhou Q, Hua D et al (2024) Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature. Sci Bull 69:227–236. https://doi.org/10.1016/j.scib.2023.12.00310.1016/j.scib.2023.12.003 ↗
45. Xiang K, Chai L, Zhang C et al (2022) Investigation of microstructure and wear resistance of laser-clad CoCrNiTi and CrFeNiTi medium-entropy alloy coatings on Ti sheet. Opt Laser Technol 145:107518. https://doi.org/10.1016/j.optlastec.2021.10751810.1016/j.optlastec.2021.107518 ↗
46. Betts JC (2009) The direct laser deposition of AISI316 stainless steel and Cr3C2 powder. J Mater Process Technol 209:5229–5238. https://doi.org/10.1016/j.jmatprotec.2009.03.01010.1016/j.jmatprotec.2009.03.010 ↗
47. Aghili SE, Shamanian M (2019) Investigation of powder fed laser cladding of NiCr-chromium carbides single-tracks on titanium aluminide substrate. Opt Laser Technol 119:105652. https://doi.org/10.1016/j.optlastec.2019.10565210.1016/j.optlastec.2019.105652 ↗
48. Ye W, Zhou Q, Shi Y et al (2024) Robust wear performance of graphene-reinforced high entropy alloy composites. Carbon 224:119040. https://doi.org/10.1016/j.carbon.2024.11904010.1016/j.carbon.2024.119040 ↗
49. Wu Q, Li W, Zhong N et al (2013) Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate. Mater Des 49:10–18. https://doi.org/10.1016/j.matdes.2013.01.06710.1016/j.matdes.2013.01.067 ↗
50. Hua D, Zhou Q, Shi Y et al (2023) Revealing the deformation mechanisms of 〈110〉 symmetric tilt grain boundaries in CoCrNi medium-entropy alloy. Int J Plast 171:103832. https://doi.org/10.1016/j.ijplas.2023.10383210.1016/j.ijplas.2023.103832 ↗
51. Cheng F, Wang Y, Yang T (2008) Microstructure and wear properties of Fe–VC–Cr7C3 composite coating on surface of cast steel. Mater Charact 59:488–492. https://doi.org/10.1016/j.matchar.2007.03.00210.1016/j.matchar.2007.03.002 ↗
52. Liu X-B, Liu H-Q, Meng X-J et al (2014) Effects of aging treatment on microstructure and tribological properties of nickel-based high-temperature self-lubrication wear resistant composite coatings by laser cladding. Mater Chem Phys 143:616–621. https://doi.org/10.1016/j.matchemphys.2013.09.04310.1016/j.matchemphys.2013.09.043 ↗
53. Verdi D, Garrido MA, Múnez CJ, Poza P (2015) Cr3C2 incorporation into an Inconel 625 laser cladded coating: Effects on matrix microstructure, mechanical properties and local scratch resistance. Mater Des 67:20–27. https://doi.org/10.1016/j.matdes.2014.10.08610.1016/j.matdes.2014.10.086 ↗
54. Zafar S, Sharma AK (2016) Abrasive and erosive wear behaviour of nanometric WC–12Co microwave clads. Wear 346–347:29–45. https://doi.org/10.1016/j.wear.2015.11.00310.1016/j.wear.2015.11.003 ↗
55. Telasang G, Dutta Majumdar J, Padmanabham G et al (2014) Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel. Surf Coat Technol 258:1108–1118. https://doi.org/10.1016/j.surfcoat.2014.07.02310.1016/j.surfcoat.2014.07.023 ↗
56. Pero-Sanz JA, Plaza D, Verdeja JI, Asensio J (1999) Metallographic characterization of hypoeutectic martensitic white cast irons: Fe–C–Cr system. Mater Charact 43:33–39. https://doi.org/10.1016/S1044-5803(99)00002-910.1016/S1044-5803(99)00002-9 ↗
57. Turalıoğlu K, Taftalı M, Tekdir H et al (2021) The tribological and corrosion properties of anodized Ti6Al4V/316L bimetallic structures manufactured by additive manufacturing. Surf Coat Technol 405:126635. https://doi.org/10.1016/j.surfcoat.2020.12663510.1016/j.surfcoat.2020.126635 ↗
58. Wu Y, Yan H, Zhu S et al (2014) Flow behavior and microstructure of ZK60 magnesium alloy compressed at high strain rate. Trans Nonferrous Met Soc China 24:930–939. https://doi.org/10.1016/S1003-6326(14)63145-910.1016/S1003-6326(14)63145-9 ↗
59. Zhang HF, Wang L, Zhang S et al (2023) Design, fabrication, microstructure and properties of in-situ synthesized TiC reinforced stainless steel matrix composite coating by laser cladding. Mater Charact 204:113177. https://doi.org/10.1016/j.matchar.2023.11317710.1016/j.matchar.2023.113177 ↗
60. Lifan S, Yuan G, Dejun K (2022) Effect of MoS2 mass fraction on microstructure and tribological characteristics of laser cladded Cu–10Al coating. Surf Interfaces 28:101599. https://doi.org/10.1016/j.surfin.2021.10159910.1016/j.surfin.2021.101599 ↗
61. Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2013) Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4V/TiC composite. Mater Des 50:656–666. https://doi.org/10.1016/j.matdes.2013.03.04910.1016/j.matdes.2013.03.049 ↗
62. Chen J, Zhao X, Zhou H et al (2014) Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr3C2–Ag composite coating from 20 to 800 °C. Surf Coat Technol 258:1183–1190. https://doi.org/10.1016/j.surfcoat.2014.07.01210.1016/j.surfcoat.2014.07.012 ↗
63. Liu X-B, Wang H-M (2006) Modification of tribology and high-temperature behavior of Ti–48Al–2Cr–2Nb intermetallic alloy by laser cladding. Appl Surf Sci 252:5735–5744. https://doi.org/10.1016/j.apsusc.2005.07.06410.1016/j.apsusc.2005.07.064 ↗
64. Zhou R, Sun G (2022) Laser alloying with Mn + Cr3C2 and Mn + NiCr-C for improved wear and corrosion resistance of stainless steel. Surf Coat Technol 451:129076. https://doi.org/10.1016/j.surfcoat.2022.12907610.1016/j.surfcoat.2022.129076 ↗
65. Sahraoui T, Fenineche N-E, Montavon G, Coddet C (2003) Structure and wear behaviour of HVOF sprayed Cr3C2–NiCr and WC–Co coatings. Mater Des 24:309–313. https://doi.org/10.1016/S0261-3069(03)00059-110.1016/S0261-3069(03)00059-1 ↗
66. Chen C, Feng A, Wei Y et al (2023) Effects of WC particles on microstructure and wear behavior of laser cladding Ni60 composite coatings. Opt Laser Technol 163:109425. https://doi.org/10.1016/j.optlastec.2023.10942510.1016/j.optlastec.2023.109425 ↗