Study on the laser ablation behavior of nitride coatings on carbon fiber epoxy resin composite
Source abstract
Abstract
The application of carbon fiber epoxy resin composite (CFRP) in the aerospace industry is limited by the laser treatment, because of the poor oxidation resistance and anti-laser ablation performance of the composites. The application of a coating on components is an effective method to improve their laser ablation resistance. The nitride coatings, consisting of Si3N4, AlN, BN, and an epoxy resin, were applied onto the CFRP using brush painting. When irradiating at 100 W/cm2 for 5 s, the damage has occurred on the coating with Si3N4 and AlN, and the BN coating remains original morphology at 100 W/cm2 for 20 s. With the power density has increased to 200 W/cm2, the serious ablation damage occurs in the BN coating irradiated for 10 s. Due to the heat absorption of resin pyrolysis and the low thermal conductivity of CFRP, the highest back-surface temperature is only 75 °C. The laser protection performance of CFRP should mainly improved by increasing the reflectivity of the coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Surface Modification and Superhydrophobicity · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Li F, Liu Y, Qu CB et al (2015) Enhanced mechanical properties of short carbon fiber reinforced polyethersulfone composites by graphene oxide coating. Polymer (Guildf) 59:155–165. https://doi.org/10.1016/j.polymer.2014.12.06710.1016/j.polymer.2014.12.067 ↗
2. Fu J, Zhang M, Jin L et al (2019) Enhancing interfacial properties of carbon fibers reinforced epoxy composites via Layer-by-Layer self assembly GO/SiO2 multilayers films on carbon fibers surface. Appl Surf Sci 470:543–554. https://doi.org/10.1016/j.apsusc.2018.11.16810.1016/j.apsusc.2018.11.168 ↗
3. Kim K, Jung YC, Kim SY et al (2018) Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coating. Compos Part A Appl Sci Manuf 109:105–114. https://doi.org/10.1016/j.compositesa.2018.02.04210.1016/j.compositesa.2018.02.042 ↗
4. Hopmann C, Karatzias C, Wagner R et al (2017) Production of CFRP components with clear surface layer in the PU spray impregnation process. AIP Conf Proc 1914. https://doi.org/10.1063/1.501675410.1063/1.5016754 ↗
5. Malinowski PH, Ostachowicz WM, Brune K, Schlag M (2017) Study of electromechanical impedance changes caused by modifications of CFRP adhesive bonds. Fatigue Fract Eng Mater Struct 40:1592–1600. https://doi.org/10.1111/ffe.1266110.1111/ffe.12661 ↗
6. Ganesan A, Takuma O, Yamada M, Fukumoto M (2016) Microstructure and mechanical properties of warm-sprayed titanium coating on carbon fiber-reinforced plastic. J Therm Spray Technol 25:788–796. https://doi.org/10.1007/s11666-016-0392-x10.1007/s11666-016-0392-x ↗
7. Khalil YF (2017) Eco-efficient lightweight carbon-fiber reinforced polymer for environmentally greener commercial aviation industry. Sustain Prod Consum 12:16–26. https://doi.org/10.1016/j.spc.2017.05.00410.1016/j.spc.2017.05.004 ↗
8. Liu YC, Wu CW, Huang YH et al (2017) Interlaminar damage of carbon fiber reinforced polymer composite laminate under continuous wave laser irradiation. Opt Lasers Eng 88:91–101. https://doi.org/10.1016/j.optlaseng.2016.08.00110.1016/j.optlaseng.2016.08.001 ↗
9. Nan P, Li X, Pan Y et al (2020) Characteristics and influences of plume during CW laser-CFRP interaction under tangential gas flow. Laser Phys 30. https://doi.org/10.1088/1555-6611/ab92a810.1088/1555-6611/ab92a8 ↗
10. Yang Y, Tian X, Ma Z et al (2022) Laser irradiation behavior of carbon fiber epoxy resin composites with laminar structure. Crystals 12. https://doi.org/10.3390/cryst1212176710.3390/cryst12121767 ↗
11. Liu T, Niu Y, Pan X et al (2019) Laser ablation behaviors of vacuum plasma sprayed ZrC-based coatings. J Am Ceram Soc 102:4247–4258. https://doi.org/10.1111/jace.1627810.1111/jace.16278 ↗
12. Cheng S, Geng L, Liu X, Wang Y (2020) Laser ablation behavior and mechanism of C/SiC coated with ZrB2–MoSi2–SiC/Mo prepared by HVOF. Ceram Int 46:17752–17762. https://doi.org/10.1016/j.ceramint.2020.04.08010.1016/j.ceramint.2020.04.080 ↗
13. Ma C, Ma Z, Gao L et al (2019) Zirconium carbide-modified polymer-matrix composites with improved reflectivity under high-energy laser ablation. Ceram Int 45:17681–17687. https://doi.org/10.1016/j.ceramint.2019.05.33510.1016/j.ceramint.2019.05.335 ↗
14. Li W, Gao L, Ma Z, Wang F (2017) Ablation behavior of graphite/SiO2 composite irradiated by high-intensity continuous laser. J Eur Ceram Soc 37:1331–1338. https://doi.org/10.1016/j.jeurceramsoc.2016.11.05210.1016/j.jeurceramsoc.2016.11.052 ↗
15. Chen G, Zhu S, Jiang Z et al (2017) Laser ablation protection of polymer matrix composites by adhesive inorganic coatings. J Mater Sci 52:12734–12741. https://doi.org/10.1007/s10853-017-1400-310.1007/s10853-017-1400-3 ↗
16. Wang J, Li C, Hu W et al (2018) Hexagonal boron nitride nanosheets incorporated antireflective silica coating with enhanced laser-induced damage threshold. High Power Laser Sci Eng 6:1–6. https://doi.org/10.1017/hpl.2018.1610.1017/hpl.2018.16 ↗
17. Zhuang Y, Wang S, Jia D et al (2015) Fabrication of gel cast BN/Si3N4 composite ceramics from surface-coated BN powder. Mater Sci Eng A 626:27–33. https://doi.org/10.1016/j.msea.2014.12.05010.1016/j.msea.2014.12.050 ↗
18. Yin X, Kong L, Zhang L et al (2014) Electromagnetic properties of Si-C-N based ceramics and composites. Int Mater Rev 59:326–355. https://doi.org/10.1179/1743280414Y.000000003710.1179/1743280414Y.0000000037 ↗
19. Liu Z, Zhao S, Yang T, Zhou J (2021) Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity. J Adv Ceram 10:1317–1325. https://doi.org/10.1007/s40145-021-0506-010.1007/s40145-021-0506-0 ↗
20. Chen F, Li F, Shen Q, Zhang L (2013) Cold spray and presureless sintering of zirconium phosphate bonded silicon nitride ceramics with porous gradient structure. J Phys Conf Ser 419. https://doi.org/10.1088/1742-6596/419/1/01200610.1088/1742-6596/419/1/012006 ↗
21. Chen S, Wang L, He G et al (2022) Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS). J Adv Ceram 11:172–183. https://doi.org/10.1007/s40145-021-0525-710.1007/s40145-021-0525-7 ↗
22. Sun Y, Zhao Z, Li X et al (2018) A novel aerogels/porous Si3N4 ceramics composite with high strength and improved thermal insulation property. Ceram Int 44:5233–5237. https://doi.org/10.1016/j.ceramint.2017.12.13210.1016/j.ceramint.2017.12.132 ↗
23. Aasi A, Aghaei SM, Panchapakesan B (2023) Noble metal (Pt or Pd)-decorated atomically thin MoS2 as a promising material for sensing colorectal cancer biomarkers through exhaled breath. Int J Comput Mater Sci Eng 13:2350014. https://doi.org/10.1142/S204768412350014810.1142/S2047684123500148 ↗
24. Aasi A, Ebrahimi Bajgani S, Panchapakesan B (2023) A first-principles investigation on the adsorption of octanal and nonanal molecules with decorated monolayer WS2 as promising gas sensing platform. AIP Adv 13:25157. https://doi.org/10.1063/5.013995010.1063/5.0139950 ↗
25. Darut G, Dieu S, Schnuriger B et al (2021) State of the art of particle emissions in thermal spraying and other high energy processes based on metal powders. J Clean Prod 303:126952. https://doi.org/10.1016/j.jclepro.2021.12695210.1016/j.jclepro.2021.126952 ↗
26. Li Y, Huang B, Liu Y, Lan L (2023) Sb2Se3/CdS/ZnO photodetectors based on physical vapor deposition for color imaging applications. Opt Lett 48:2583–258610.1364/OL.487169 ↗
27. Li M, Wang D, Xue J, Jia R (2019) Direct preparation of Y3Al5O12 hollow microspheres using cathode plasma electrolytic deposition. Ceram Int 45:24919–24922. https://doi.org/10.1016/j.ceramint.2019.08.16810.1016/j.ceramint.2019.08.168 ↗
28. Miśkiewicz P, Frydrych I, Cichocka A (2022) Application of physical vapor deposition in textile industry. Autex Res J 22:42–54. https://doi.org/10.2478/aut-2020-000410.2478/aut-2020-0004 ↗
29. Zheng X, Park CW (2019) Thermal and mechanical properties of carbon fiber-reinforced resin composites with copper/boron nitride coating. Compos Struct 220:494–501. https://doi.org/10.1016/j.compstruct.2019.03.08910.1016/j.compstruct.2019.03.089 ↗
30. Kim G-W, Kim YJ (2021) Review of brush painting for cost-efficient paintable electronics. Appl Sci Converg Technol 30:1–510.5757/ASCT.2021.30.1.001 ↗
31. Zeng X, Shen Y, Liu Y et al (2020) A cross-linked coating decorated mesh prepared by brush-painting method for oil-in-water emulsions separation. Mater Chem Phys 242:122541. https://doi.org/10.1016/j.matchemphys.2019.12254110.1016/j.matchemphys.2019.122541 ↗
32. Heo SW, Lee JY, Song HJ et al (2011) Patternable brush painting process for fabrication of flexible polymer solar cells. Sol Energy Mater Sol Cells 95:3041–3046. https://doi.org/10.1016/j.solmat.2011.06.02910.1016/j.solmat.2011.06.029 ↗