Preparation, material modification and cryogenic mechanical properties of fiber-reinforced polymer (FRP) composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ajaja J, Barthelat F (2016) Damage accumulation in a carbon fiber fabric reinforced cyanate ester composite subjected to mechanical loading and thermal cycling. Compos B Eng 90:523. https://doi.org/10.1016/j.compositesb.2015.09.05410.1016/j.compositesb.2015.09.054 ↗
2. Atli-Veltin B (2018) Cryogenic performance of single polymer polypropylene composites. Cryogenics 90:86. https://doi.org/10.1016/j.cryogenics.2018.01.00910.1016/j.cryogenics.2018.01.009 ↗
3. Bailey WOS, Bostock TD, Crump DA, Dulieu‐Barton JM, Simon, Quinn, and . Robinson AF, Ed.^Eds), Year of Converence
4. Barbero E, Cabrera Barbero J (2018) Damage initiation and evolution during monotonic cooling of laminated composites. J Compos Mater 52:4151. https://doi.org/10.1177/002199831877672110.1177/0021998318776721 ↗
5. Bechel VT, Camping JD, Kim RY (2005) Cryogenic/elevated temperature cycling induced leakage paths in PMCs. Compos B Eng 36:171. https://doi.org/10.1016/j.compositesb.2004.03.00110.1016/j.compositesb.2004.03.001 ↗
6. Bhattacharyya A, Pötschke P (2006) Mechanical properties and morphology of melt-mixed PA6/SWNT composites: effect of reactive coupling. Macromol Symposia 233:161. https://doi.org/10.1002/masy.20069001310.1002/masy.200690013 ↗
7. Castellanos AG, Cinar K, Guven I, Prabhakar P (2018) Low-velocity impact response of woven carbon composites in arctic conditions. J Dyn Behav Mater 4:308. https://doi.org/10.1007/s40870-018-0160-810.1007/s40870-018-0160-8 ↗
8. Charalambous G, Allegri G, Hallett SR (2015) Temperature effects on mixed mode I/II delamination under quasi-static and fatigue loading of a carbon/epoxy composite. Compos Part A: Appl Sci Manuf 77:75. https://doi.org/10.1016/j.compositesa.2015.05.01610.1016/j.compositesa.2015.05.016 ↗
9. Chen Y, Jian M, Bo Q, Zhao M (2024) Progress in surface modification preparation, interface characterization and properties of continuous carbon fiber reinforced polymer matrix composites. Compos Interfaces 31:729. https://doi.org/10.1080/09276440.2023.227939810.1080/09276440.2023.2279398 ↗
10. Chen Y, Wei X, Mao J, Zhao M, Liu G (2024) Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: revealing synergistic mechanical properties and failure mechanisms. Polym Compos 45:10888. https://doi.org/10.1002/pc.2851610.1002/pc.28516 ↗
11. Dagdag O, Kim HJJOCS (2024) Cryogenic impact on carbon fiber-reinforced epoxy composites for hydrogen storage vessels. 8:45910.3390/jcs8110459 ↗
12. Dasari S, Saurabh S, Gupta S, Ray BC, Prusty RK (2020) Experimental amelioration of flexural behavior under cryogenic conditioning through inter-ply fiber hybridization in FRP composites. Mater Today: Proc 27:1618. https://doi.org/10.1016/j.matpr.2020.03.33610.1016/j.matpr.2020.03.336 ↗
13. Dasari S, Patnaik S, Ray BC, Prusty RK (2023) Effects of in-situ cryogenic testing temperature and ex-situ cryogenic aging on the mechanical performance of glass fiber reinforced polymer composites with waste short carbon fibers as secondary reinforcements. Polym Compos 44:294. https://doi.org/10.1002/pc.2704510.1002/pc.27045 ↗
14. Ding S, Zou B, Zhang P, Liu Q, Feng Z, Quan T, Wang F, Li L, Liu J (2024) Layout design and mechanical behavior of 3D printed intralayer hybrid continuous carbon/glass fiber composites. J Manuf Process 115:126. https://doi.org/10.1016/j.jmapro.2024.02.02610.1016/j.jmapro.2024.02.026 ↗
15. Donaldson SL, Kim RYJAM, Odyssey P (2001) Mode I fracture of a carbon fiber-reinforced bismaleimide composite at cryogenic temperatures. 1557
16. Dutta PK, Hui D (1996) Low-temperature and freeze-thaw durability of thick composites. Compos B Eng 27:371. https://doi.org/10.1016/1359-8368(96)00007-810.1016/1359-8368(96)00007-8 ↗
17. Elamin M, Li B, Tan KT (2018) Impact damage of composite sandwich structures in arctic condition. Compos Struct 192:422. https://doi.org/10.1016/j.compstruct.2018.03.01510.1016/j.compstruct.2018.03.015 ↗
18. Elamin M, Li B, Tan KT (2018) Impact performance of stitched and unstitched composites in extreme low temperature arctic conditions. J Dyn Behav Mater 4:317. https://doi.org/10.1007/s40870-018-0158-210.1007/s40870-018-0158-2 ↗
19. Feng Q-P, Deng Y-H, Xiao H-M, Liu Y, Qu C-B, Zhao Y, Fu S-Y (2014) Enhanced cryogenic interfacial normal bond property between carbon fibers and epoxy matrix by carbon nanotubes. Compos Sci Technol 104:59. https://doi.org/10.1016/j.compscitech.2014.09.00610.1016/j.compscitech.2014.09.006 ↗
20. Flanagan DM, Grogan J, Goggins S, Appel K, Doyle K, Leen SB, Brádaigh CMÓ (2017) Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers. Compos Part A: Appl Sci Manuf 101:173. https://doi.org/10.1016/j.compositesa.2017.06.01310.1016/j.compositesa.2017.06.013 ↗
21. Garcia-Gonzalez D, Rodriguez-Millan M, Rusinek A, Arias A (2015) Low temperature effect on impact energy absorption capability of PEEK composites. Compos Struct 134:440. https://doi.org/10.1016/j.compstruct.2015.08.09010.1016/j.compstruct.2015.08.090 ↗
22. Gong M, Wang XF, Zhao JH (2007) Experimental study on mechanical behavior of laminates at low temperature. Cryogenics 47:1. https://doi.org/10.1016/j.cryogenics.2006.01.01810.1016/j.cryogenics.2006.01.018 ↗
23. Grimsley BW, Cano RJ, Johnston NJ, Loos AC, Mcmahon WM (2001) Hybrid composites For Lh2 fuel tank structure
24. Grogan DM, Leen SB, Semprimoschnig COA, Brádaigh CMÓ (2014) Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates. Compos Part A: Appl Sci Manuf 66:237. https://doi.org/10.1016/j.compositesa.2014.08.00710.1016/j.compositesa.2014.08.007 ↗
25. Grogan DM, Brádaigh CMÓ, McGarry JP, Leen SB (2015) Damage and permeability in tape-laid thermoplastic composite cryogenic tanks. Compos Part A: Appl Sci Manuf 78:390. https://doi.org/10.1016/j.compositesa.2015.08.03710.1016/j.compositesa.2015.08.037 ↗
26. Gupta S, Hojjati M (2018) Thermal cycle effects on laminated composite plates containing voids. J Compos Mater 53:489. https://doi.org/10.1177/002199831878678510.1177/0021998318786785 ↗
27. He Y, Chen Q, Yang S, Lu C, Feng M, Jiang Y, Cao G, Zhang J, Liu C (2018) Micro-crack behavior of carbon fiber reinforced Fe3O4/graphene oxide modified epoxy composites for cryogenic application. Compos Part A: Appl Sci Manuf 108:12. https://doi.org/10.1016/j.compositesa.2018.02.01410.1016/j.compositesa.2018.02.014 ↗
28. He Y, Yang S, Liu H, Shao Q, Chen Q, Lu C, Jiang Y, Liu C, Guo Z (2018) Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: magnetic field assisted alignment and cryogenic temperature mechanical properties. J Colloid Interface Sci 517:40. https://doi.org/10.1016/j.jcis.2018.01.08710.1016/j.jcis.2018.01.087 ↗
29. Hegde S, Hojjati M (2018) Thermally induced microcracks and mechanical property of composite honeycomb sandwich structure: experiment and finite element analysis. J Sandwich Struct Mater 22:109963621880243. https://doi.org/10.1177/109963621880243210.1177/1099636218802432 ↗
30. Hegde SR, Hojjati M (2019) Effect of core and facesheet thickness on mechanical property of composite sandwich structures subjected to thermal fatigue. Int J Fatigue 127:16. https://doi.org/10.1016/j.ijfatigue.2019.05.03110.1016/j.ijfatigue.2019.05.031 ↗
31. Hohe J, Neubrand A, Fliegener S, Beckmann C, Schober M, Weiss K-P, Appel S (2021) Performance of fiber reinforced materials under cryogenic conditions—A review. Compos Part A: Appl Sci Manuf 141:106226. https://doi.org/10.1016/j.compositesa.2020.10622610.1016/j.compositesa.2020.106226 ↗
32. Hohe J, Schober M, Fliegener S, Weiss K-P, Appel S (2021) Effect of cryogenic environments on failure of carbon fiber reinforced composites. Compos Sci Technol 212:108850. https://doi.org/10.1016/j.compscitech.2021.10885010.1016/j.compscitech.2021.108850 ↗
33. Hsieh TH, Kinloch AJ, Masania K, Taylor AC, Sprenger S (2010) The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles. Polymer 51:6284. https://doi.org/10.1016/j.polymer.2010.10.04810.1016/j.polymer.2010.10.048 ↗
34. Huang CJ, Fu SY, Zhang YH, Lauke B, Li LF, Ye L (2005) Cryogenic properties of SiO2/epoxy nanocomposites. Cryogenics 45:450. https://doi.org/10.1016/j.cryogenics.2005.03.00310.1016/j.cryogenics.2005.03.003 ↗
35. Hung P-Y, Lau K-T, Qiao K, Fox B, Hameed N (2019) Property enhancement of CFRP composites with different graphene oxide employment methods at a cryogenic temperature. Compos Part A: Appl Sci Manuf 120:56. https://doi.org/10.1016/j.compositesa.2019.02.01210.1016/j.compositesa.2019.02.012 ↗
36. Huo X, Han C, Wu D, Lu H, Sun Z, Chen Z, Yang Y, Li VC (2025) Tensile behavior simulation of ECC/SHCC at subzero temperatures based on a fiber/interface combination constitutive model. Cem Concr Compos 158:105969. https://doi.org/10.1016/j.cemconcomp.2025.10596910.1016/j.cemconcomp.2025.105969 ↗
37. Icten B (2014) Low temperature effect on single and repeated impact behavior of woven glass-epoxy composite plates. J Compos Mater 49:1171. https://doi.org/10.1177/002199831453130910.1177/0021998314531309 ↗
38. Icten BM, Atas C, Aktas M, Karakuzu R (2009) Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates. Compos Struct 91:318. https://doi.org/10.1016/j.compstruct.2009.05.01010.1016/j.compstruct.2009.05.010 ↗
39. Islam MS, Avila R, Castellanos A, Prabhakar P (2016) Hybrid textile composites as potential cryogenic tank materials10.2514/6.2016-1237 ↗
40. Islam MS, Melendez-Soto E, Castellanos AG, Prabhakar P (2015) Investigation of woven composites as potential cryogenic tank materials. Cryogenics 72:82. https://doi.org/10.1016/j.cryogenics.2015.09.00510.1016/j.cryogenics.2015.09.005 ↗
41. Islam MS, Benninger LF, Pearce G, Wang C-H (2021) Toughening carbon fibre composites at cryogenic temperatures using low-thermal expansion nanoparticles. Compos Part A: Appl Sci Manuf 150:106613. https://doi.org/10.1016/j.compositesa.2021.10661310.1016/j.compositesa.2021.106613 ↗
42. Islam MS, Chang W, Sha Z, Wang J, Wu S, Rose LRF, Kinloch AJ, Wang CH (2023) Mitigating cryogenic microcracking in carbon-fibre reinforced polymer composites using negative thermal-expansion nanoparticles functionalized by a polydopamine coating. Compos B Eng 257:110676. https://doi.org/10.1016/j.compositesb.2023.11067610.1016/j.compositesb.2023.110676 ↗
43. Jean-St-Laurent M, Dano M-L, Potvin M-J (2016) Study of damage induced by extreme thermal cycling in cyanate ester laminates and sandwich panels. J Compos Mater 51:2023. https://doi.org/10.1177/002199831666693710.1177/0021998316666937 ↗
44. Jia Z, Li T, Chiang F-P, Wang L (2018) An experimental investigation of the temperature effect on the mechanics of carbon fiber reinforced polymer composites. Compos Sci Technol 154:53. https://doi.org/10.1016/j.compscitech.2017.11.01510.1016/j.compscitech.2017.11.015 ↗
45. Jiang J-W, Wang J-S, Li B (2009) Thermal expansion in single-walled carbon nanotubes and graphene: nonequilibrium Green’s function approach. Phys Rev B 80:205429. https://doi.org/10.1103/PhysRevB.80.20542910.1103/PhysRevB.80.205429 ↗
46. Jiang J, Yao X, Xu C, Su Y, Zhou L, Deng C (2017) Influence of electrochemical oxidation of carbon fiber on the mechanical properties of carbon fiber/graphene oxide/epoxy composites. Compos Part A: Appl Sci Manuf 95:248. https://doi.org/10.1016/j.compositesa.2017.02.00410.1016/j.compositesa.2017.02.004 ↗
47. Jin Z, Zhang Z, Meng L (2006) Effects of ozone method treating carbon fibers on mechanical properties of carbon/carbon composites. Mater Chem Phys 97:167. https://doi.org/10.1016/j.matchemphys.2005.08.00210.1016/j.matchemphys.2005.08.002 ↗
48. Justo J, Távara L, García-Guzmán L, París F (2018) Characterization of 3D printed long fibre reinforced composites. Compos Struct 185:537. https://doi.org/10.1016/j.compstruct.2017.11.05210.1016/j.compstruct.2017.11.052 ↗
49. Kara M, Kırıcı M, Tatar AC, Avcı A (2018) Impact behavior of carbon fiber/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment. Compos B Eng 145:145. https://doi.org/10.1016/j.compositesb.2018.03.02710.1016/j.compositesb.2018.03.027 ↗
50. Khalili SMR, Farsani RE, Soleimani N, Hedayatnasab ZJJOTCM (2016) Charpy impact behavior of clay/basalt fiber-reinforced polypropylene nanocomposites at various temperatures. 29:141610.1177/0892705714563561 ↗
51. Khan MH, Elamin M, Li B, Tan KT (2018) X-ray micro-computed tomography analysis of impact damage morphology in composite sandwich structures due to cold temperature arctic condition. J Compos Mater 52:3509. https://doi.org/10.1177/002199831878567110.1177/0021998318785671 ↗
52. Kim M-G, Kang S-G, Kim C-G, Kong C-W (2007) Tensile response of graphite/epoxy composites at low temperatures. Compos Struct 79:84. https://doi.org/10.1016/j.compstruct.2005.11.03110.1016/j.compstruct.2005.11.031 ↗
53. Kobayashi S, Tomoaki S, Goto K (2019) Microscopic damage behavior in carbon fiber reinforced plastic laminates for a high accuracy antenna in a satellite under cyclic thermal loading. Adv Compos Mater 28:259. https://doi.org/10.1080/09243046.2018.155174510.1080/09243046.2018.1551745 ↗
54. Kong D-l, He F, Zhu P, Zhang C -Y, Ouyang J-T (2020) Study of large-area atmospheric pressure plasma jet based on coplanar dielectric barrier discharge (in Chinese). Sci Sinica Phys Mech Astron 50:152 https://doi.org/10.1360/SSPMA-2020-015510.1360/SSPMA-2020-0155 ↗
55. Kumagai S, Shindo Y, Horiguchi K, Takada T (2002) 214 mechanical characterization of CFRP woven laminates between room temperature and 4 K. The Proc JSME Mater Process Confe (M&P) 10(1):445. https://doi.org/10.1299/jsmeintmp.10.1.44510.1299/jsmeintmp.10.1.445 ↗
56. Kumar S, Kumar K, Kumar K, Ray B (2016) Fabrication of advanced fiber reinforced composite materials and their cryogenic behavior assessment
57. Kwon D-J, Wang Z-J, Choi J-Y, Shin P-S, Devries KL, Park J-M (2015) Interfacial evaluation of carbon fiber/epoxy composites using electrical resistance measurements at room and a cryogenic temperature. Compos Part A: Appl Sci Manufact 72:160. https://doi.org/10.1016/j.compositesa.2015.02.00710.1016/j.compositesa.2015.02.007 ↗
58. Li M, Sun B-H (2023) Constitutive relation development for fused deposition modeling three- dimensional printing materials and simulation of printing direction combination. https://doi.org/10.1115/1.406253510.1115/1.4062535 ↗
59. Li N, Li Y, Liu SJJOMPT (2016) Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. 238:21810.1016/j.jmatprotec.2016.07.025 ↗
60. Li D-S, Zhao C-Q, Jiang L, Jiang N (2014) Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature. Compos Struct 111:56. https://doi.org/10.1016/j.compstruct.2013.12.02610.1016/j.compstruct.2013.12.026 ↗
61. Li D-S, Duan H-W, Jiang N, Jiang L (2015) Mechanical response and failure of 3D MWK carbon/epoxy composites at cryogenic temperature. Fibers and Polymers 16:1349. https://doi.org/10.1007/s12221-015-1349-210.1007/s12221-015-1349-2 ↗
62. Li F, Liu Y, Qu C-B, Xiao H-M, Hua Y, Sui G-X, Fu S-Y (2015) Enhanced mechanical properties of short carbon fiber reinforced polyethersulfone composites by graphene oxide coating. Polymer 59:155. https://doi.org/10.1016/j.polymer.2014.12.06710.1016/j.polymer.2014.12.067 ↗
63. Li D-S, Zhao C-Q, Jiang N, Jiang L (2015) Experimental study on the charpy impact failure of 3D integrated woven spacer composite at room and liquid nitrogen temperature. Fibers Polym 16:875. https://doi.org/10.1007/s12221-015-0875-210.1007/s12221-015-0875-2 ↗
64. Li F, Hua Y, Qu C-B, Xiao H-M, Fu S-Y (2016) Greatly enhanced cryogenic mechanical properties of short carbon fiber/polyethersulfone composites by graphene oxide coating. Compos Part A: Appl Sci Manuf 89:47. https://doi.org/10.1016/j.compositesa.2016.02.01610.1016/j.compositesa.2016.02.016 ↗
65. Li D-S, Duan H-W, Jiang L (2019) Cryogenic compression properties and failure mechanism of lightweight 3D MWK Carbon fabric reinforced epoxy composites. Fibers Polym 20:642. https://doi.org/10.1007/s12221-019-8639-z10.1007/s12221-019-8639-z ↗
66. Li S, Chen D, Gao C, Yuan Y, Hongyu W, Liu X, Hu B, Ma J, Liu M, Wu Z (2020) Epoxy-functionalized polysiloxane/Nano-SiO2 synergistic reinforcement in cryogenic mechanical properties of epoxy and carbon fiber reinforced epoxy laminate. Compos Sci Technol 198:108292. https://doi.org/10.1016/j.compscitech.2020.10829210.1016/j.compscitech.2020.108292 ↗
67. Li Y, Wei Y, Meng J, Zhang L, Wang P, Zheng H, Lei H (2022) Damage evolution characterization of glass fabric composites at cryogenic temperatures via in-situ tensile X-ray computed tomography tests. Compos Commun 35:101326. https://doi.org/10.1016/j.coco.2022.10132610.1016/j.coco.2022.101326 ↗
68. Liu X, Sun T, Wu Z, He HJJOCM (2018) Mode II interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites with synthetic boehmite nanosheets at room temperature and low temperature 52:94510.1177/0021998317716529 ↗
69. Liu W, Gao Y, Liu X, Qiu Y, Xu F (2019) Tensile and interfacial properties of dry-jet wet-spun and wet-spun polyacrylonitrile-based carbon fibers at cryogenic condition. https://doi.org/10.1177/155892501983516410.1177/1558925019835164 ↗
70. Liu J, Qiao W, Liu J, Xie D, Zhou Z, Ma L, Wu L (2015) The compressive responses of glass fiber composite pyramidal truss cores sandwich panel at different temperatures. Compos Part A Appl Sci Manuf 73:93. https://doi.org/10.1016/j.compositesa.2015.03.00410.1016/j.compositesa.2015.03.004 ↗
71. Liu N, Wang H, Ma B, Xu B, Qu L, Fang D, Yang Y (2022) Enhancing cryogenic mechanical properties of epoxy resins toughened by biscitraconimide resin. Compos Sci Technol 220:109252. https://doi.org/10.1016/j.compscitech.2021.10925210.1016/j.compscitech.2021.109252 ↗
72. Liu J, Wang L, He Y, Zhang Y, Yuan X, Li W (2023) Experimental study of notched tensile strength of large open-hole carbon fiber reinforced polymer laminates at low temperature. Compos Commun 39:101546. https://doi.org/10.1016/j.coco.2023.10154610.1016/j.coco.2023.101546 ↗
73. Lopresto V, Papa I, Langella A (2017) Residual strength evaluation after impact tests in extreme temperature conditions. New equipment for CAI tests. Compos Part B Eng 127:44. https://doi.org/10.1016/j.compositesb.2017.03.01310.1016/j.compositesb.2017.03.013 ↗
74. Lu Z, Xian G (2017) Combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of pultruded BFRP plates. Constr Build Mater 150:310. https://doi.org/10.1016/j.conbuildmat.2017.06.02610.1016/j.conbuildmat.2017.06.026 ↗
75. Lüders C, Kalinka G, Li W, Sinapius M, Wille T (2020) Experimental and numerical multiscale approach to thermally cycled FRP. Compos Struct 244:112303. https://doi.org/10.1016/j.compstruct.2020.11230310.1016/j.compstruct.2020.112303 ↗
76. Ma H-L, Jia Z, Lau K-T, Leng J, Hui D (2016) Impact properties of glass fiber/epoxy composites at cryogenic environment. Compos B Eng 92:210. https://doi.org/10.1016/j.compositesb.2016.02.01310.1016/j.compositesb.2016.02.013 ↗
77. Ma L, Liu H, Wen X, Szymańska K, Mijowska E, Hao C, Tang T, Lei Q (2022) Polyhydric SiO2 coating assistant to graft organophosphorus onto glass fabric for simultaneously improving flame retardancy and mechanical properties of epoxy resin composites. Compos B Eng 243:110176. https://doi.org/10.1016/j.compositesb.2022.11017610.1016/j.compositesb.2022.110176 ↗
78. Mahdavi S, Gupta SK, Hojjati M (2018) Thermal cycling of composite laminates made of out-of-autoclave materials. 25:1145. https://doi.org/10.1515/secm-2017-013210.1515/secm-2017-0132 ↗
79. Maity T, Samanta BC, Dalai S, Banthia AK (2007) Curing study of epoxy resin by new aromatic amine functional curing agents along with mechanical and thermal evaluation. Mater Sci Eng, A 464:38. https://doi.org/10.1016/j.msea.2007.01.12810.1016/j.msea.2007.01.128 ↗
80. Matsuzaki R, Ueda M, Namiki M, Jeong T-K, Asahara H, Horiguchi K, Nakamura T, Todoroki A, Hirano Y (2016) Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep 6:23058. https://doi.org/10.1038/srep2305810.1038/srep23058 ↗
81. Melcher RJ, Johnson WS (2007) Mode I fracture toughness of an adhesively bonded composite–composite joint in a cryogenic environment. Compos Sci Technol 67:501. https://doi.org/10.1016/j.compscitech.2006.08.02610.1016/j.compscitech.2006.08.026 ↗
82. Mengjin WU, Lixia JIA, Suling LU, Zhigang QIN, Sainan WEI, Ruosi YAN (2021) Interfacial performance of high-performance fiber-reinforced composites improved by cold plasma treatment: a review. Surf Interfaces 24:101077. https://doi.org/10.1016/j.surfin.2021.10107710.1016/j.surfin.2021.101077 ↗
83. Murray B, Leen S, Semprimoschnig C, O’Bradaigh C (2016) Helium permeability of polymer materials as liners for composite overwrapped pressure vessels. J Appl Polym Sci. https://doi.org/10.1002/app.4367510.1002/app.43675 ↗
84. Nikonovich M, Costa JFS, Fonseca AC, Ramalho A, Emami N (2023) Structural, thermal, and mechanical characterisation of PEEK-based composites in cryogenic temperature. Polym Testing 125:108139. https://doi.org/10.1016/j.polymertesting.2023.10813910.1016/j.polymertesting.2023.108139 ↗
85. Nikonovich M, Ramalho A, Emami N (2024) Effect of cryogenic aging and test-environment on the tribological and mechanical properties of PEEK composites. Tribol Int 194:109554. https://doi.org/10.1016/j.triboint.2024.10955410.1016/j.triboint.2024.109554 ↗
86. Norizan MN, Moklis MH, Ngah Demon SZ, Halim NA, Samsuri A, Mohamad IS, Knight VF, Abdullah N (2020) Carbon nanotubes: functionalisation and their application in chemical sensors. RSC Adv 10:43704. https://doi.org/10.1039/D0RA09438B10.1039/D0RA09438B ↗
87. Nurazzi NM, Sabaruddin FA, Harussani MM, Kamarudin SH, Rayung M, Asyraf MRM, Aisyah HA, Norrrahim MNF, Ilyas RA, Abdullah N, Zainudin ES, Sapuan SM, Khalina A (2021) Mechanical performance and applications of CNTs reinforced polymer composites-a review. Nanomaterials (Basel). https://doi.org/10.3390/nano1109218610.3390/nano11092186 ↗
88. Pan Z, Gu B, Sun B (2015) Experimental investigation of high-strain rate properties of 3-D braided composite material in cryogenic field. Compos B Eng 77:379. https://doi.org/10.1016/j.compositesb.2015.03.00210.1016/j.compositesb.2015.03.002 ↗
89. Pan Z, Sun B, Gu B (2016) Thermo-mechanical numerical modeling on impact compressive damage of 3-D braided composite materials under room and low temperatures. Aerosp Sci Technol 54:23. https://doi.org/10.1016/j.ast.2016.03.02710.1016/j.ast.2016.03.027 ↗
90. Peng X, Zhang M, Guo Z, Sang L, Hou W (2020) Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites. Composites Communications 22:100478. https://doi.org/10.1016/j.coco.2020.10047810.1016/j.coco.2020.100478 ↗
91. Pierson HA, Celik E, Abbott A, De Jarnette H, Sierra Gutierrez L, Johnson K, Koerner H, Baur JW (2019) Mechanical properties of printed epoxy-carbon fiber composites. Exp Mech 59:843. https://doi.org/10.1007/s11340-019-00498-z10.1007/s11340-019-00498-z ↗
92. Qu C-B, Huang Y, Li F, Xiao H-M, Liu Y, Feng Q-P, Huang G-W, Li N, Fu S-Y (2020) Enhanced cryogenic mechanical properties of carbon fiber reinforced epoxy composites by introducing graphene oxide. Compos Commun 22:100480. https://doi.org/10.1016/j.coco.2020.10048010.1016/j.coco.2020.100480 ↗
93. Russo P, Langella A, Papa I, Simeoli G, Lopresto V (2017) Thermoplastic polyurethane/glass fabric composite laminates: low velocity impact behavior under extreme temperature conditions. Compos Struct 166:146. https://doi.org/10.1016/j.compstruct.2017.01.05410.1016/j.compstruct.2017.01.054 ↗
94. Saeed K, McIlhagger A, Harkin-Jones E, McGarrigle C, Dixon D, Ali Shar M, McMillan A, Archer E (2022) Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions. Compos Struct 282:115033. https://doi.org/10.1016/j.compstruct.2021.11503310.1016/j.compstruct.2021.115033 ↗
95. Scatteia L, Lenzi F, Totaro G, Cantoni S, Franceschi M (2005) Composite and nanocomposite materials evaluation and assessment for cryogenic propellant storage10.2514/6.2005-3435 ↗
96. Sethi S, Rathore DK, Ray BC (2015) Effects of temperature and loading speed on interface-dominated strength in fibre/polymer composites: an evaluation for in-situ environment. Mater Design (1980-2015) 65:617. https://doi.org/10.1016/j.matdes.2014.09.05310.1016/j.matdes.2014.09.053 ↗
97. Shakir Abbood SA, Odaa SA, Hasan KF, Jasim MA (2021) Properties evaluation of fiber reinforced polymers and their constituent materials used in structures – a review. Mater Today Proc 43:1003–1008. https://doi.org/10.1016/j.matpr.2020.07.63610.1016/j.matpr.2020.07.636 ↗
98. Shao Y, Xu F, Liu W, Zhou M, Li W, Hui D, Qiu Y (2017) Influence of cryogenic treatment on mechanical and interfacial properties of carbon nanotube fiber/bisphenol-F epoxy composite. Compos B Eng 125:195. https://doi.org/10.1016/j.compositesb.2017.05.07710.1016/j.compositesb.2017.05.077 ↗
99. Shen X-J, Meng L-X, Yan Z-Y, Sun C-J, Ji Y-H, Xiao H-M, Fu S-Y (2015) Improved cryogenic interlaminar shear strength of glass fabric/epoxy composites by graphene oxide. Compos B Eng 73:126. https://doi.org/10.1016/j.compositesb.2014.12.02310.1016/j.compositesb.2014.12.023 ↗
100. Sun X, Sun H, Li H, Peng H (2013) Developing polymer composite materials: Carbon nanotubes or graphene? Adv Mater 25:5153. https://doi.org/10.1002/adma.20130192610.1002/adma.201301926 ↗