Difference between thermal-induced martensite and deformation-induced martensite in 304 austenitic stainless steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Dong X, Xia W, Jian Y, Weiguo S, Yanfeng L, Yuqin Z (2018) Effect of cold deformation on microstructures and mechanical properties of austenitic stainless steel. Metals 8(7):522. https://doi.org/10.3390/MET807052210.3390/MET8070522 ↗
2. Jian W, Fengli Z (2017) Effects of cold deformation on electrochemical corrosion behaviors of 304 stainless steel. Anti-Corros Methods Mater 64(2):252–262. https://doi.org/10.1108/ACMM-12-2015-162010.1108/ACMM-12-2015-1620 ↗
3. Lakshmi A, Buddi T, Bandhavi C, Subbiah R (2020) Investigation of microstructure and mechanical properties of austenite stainless steel 304 during tempering and cryogenic heat treatment. In: E3S web of conferences, vol 184, p 01006. https://doi.org/10.1051/e3sconf/20201840100610.1051/e3sconf/202018401006 ↗
4. Zhao Y, Bai Y, Yang J, Shen Y, Lou Y, Zhang K, Wu Y, Li Y, Li J, Cui Z, Wei T (2024) Autoclave grid-to-rod fretting corrosion behaviors of the Zr alloy fuel cladding with and without Cr coating through advanced characterization. Corros Sci 239:112379. https://doi.org/10.1016/j.corsci.2024.11237910.1016/j.corsci.2024.112379 ↗
5. Wang L, Li B, Shi Y, Huang G, Song W, Li S (2019) Optimizing mechanical properties of gradient-structured low-carbon steel by manipulating grain size distribution. Mater Sci Eng A 743:309–313. https://doi.org/10.1016/J.MSEA.2018.11.04210.1016/J.MSEA.2018.11.042 ↗
6. Kumar GVS, Mangipudi KR, Sastry GVS, Singh LK, Dhanasekaran S, Sivaprasad K (2020) Excellent combination of tensile ductility and strength due to nanotwinning and a biamodal structure in cryorolled austenitic stainless steel. Sci Rep 10(1):354. https://doi.org/10.1038/s41598-019-57208-x10.1038/s41598-019-57208-x ↗
7. Nobuhiko M, Fukuta Y, Osawa M, Watanabe H, Kubo S, Kitamura T (2017) High temperature mechanical properties of harmonic structure designed SUS304L austenitic stainless steel. Mater Sci Forum 879:2507–2511. https://doi.org/10.4028/www.scientific.net/MSF.879.250710.4028/www.scientific.net/MSF.879.2507 ↗
8. Zhe Z, Hong Ma, Rui Z, Jiapeng W, Ming Li, Xiaowei W (2017) Fatigue behavior of a harmonic structure designed austenitic stainless steel under uniaxial stress loading. Mater Sci Eng A 707:287–294. https://doi.org/10.1016/J.MSEA.2017.09.06310.1016/J.MSEA.2017.09.063 ↗
9. Somani MC, Jaskari M, Sadeghpour S, Hu C, Misra RDK, Nyo TT, Karjalainen LP (2020) Improving the yield strength of an antibacterial 304Cu austenitic stainless steel by the reversion treatment. Mater Sci Eng A 793:139885. https://doi.org/10.1016/j.msea.2020.13988510.1016/j.msea.2020.139885 ↗
10. Shi JT, Hou LG, Zuo JR, Zhuang LZ, Zhang JS (2017) Effect of cryogenic rolling and annealing on the microstructure evolution and mechanical properties of 304 stainless steel. Int J Min Metall Mater 24:638–645. https://doi.org/10.1007/s12613-017-1446-x10.1007/s12613-017-1446-x ↗
11. Chen A, Wang C, Jiang J, Ruan H, Lu J (2021) Microstructure evolution and mechanical properties of austenite stainless steel with gradient twinned structure by surface mechanical attrition treatment. Nanomaterials 11(6):1624. https://doi.org/10.3390/nano1106162410.3390/nano11061624 ↗
12. Goutham KSV, Rama V, Srinivas PD, Srinivasa SVG, Ramasamy J (2019) Role of deformation induced martensite on mechanical properties of cryorolled 304 stainless steel. Mater Res Express 6(8):086593. https://doi.org/10.1088/2053-1591/ab187b10.1088/2053-1591/ab187b ↗
13. Bethi RK, Kumar SA, Sandip D, Kumar BD (2004) Cold rolling texture in AISI 304 stainless steel. Mater Sci Eng A 364:132–139. https://doi.org/10.1016/j.msea.2003.08.01210.1016/j.msea.2003.08.012 ↗
14. Ye KL, Luo HY, Lv JL (2014) Producing nanostructured 304 stainless steel by rolling at cryogenic temperature. Mater Manuf Processes 29(6):754–758. https://doi.org/10.1080/10426914.2014.90153410.1080/10426914.2014.901534 ↗
15. Ravi S, Deepak S, Ravi V, Pravin K, Kumar YS, Kumar SA (2018) Mechanical behavior of 304 austenitic stainless steel processed by cryogenic rolling. Mater Today Proc 5(9):16880–16886. https://doi.org/10.1016/j.matpr.2018.04.09010.1016/j.matpr.2018.04.090 ↗
16. Zhengning L, Jian Y, Peiqing L, Tang Ying Hu, Tao WX (2022) Strength–ductility synergy in 316L austenitic stainless steel with a heterogeneous structure. Mater Sci Eng A 861:144385. https://doi.org/10.1016/j.msea.2022.14438510.1016/j.msea.2022.144385 ↗
17. Wasnik DN, Gopalakrishnan IK, Yakhmi JV, Kain V, Samajdar I (2003) Cold rolled texture and microstructure in types 304 and 316L austenitic stainless steels. ISIJ Int 43(10):1581–1589. https://doi.org/10.2355/isijinternational.43.158110.2355/isijinternational.43.1581 ↗
18. Li X, Wei Y, Wei Z, Zhou J (2019) Effect of cold rolling on microstructure and mechanical properties of AISI 304N stainless steel. In: IOP conference series: earth and environmental science. IOP Publishing, vol 252, no 2, p 022027. https://doi.org/10.1088/1755-1315/252/2/02202710.1088/1755-1315/252/2/022027 ↗
19. Belyakov A, Sakai T, Miura H (2001) Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation. Mater Sci Eng A 319:867–871. https://doi.org/10.1016/S0921-5093(00)02028-110.1016/S0921-5093(00)02028-1 ↗
20. Singh R, Goel S, Verma R, Jayaganthan R, Kumar A (2018) Mechanical behaviour of 304 austenitic stainless steel processed by room temperature rolling. In: IOP conference series: materials science and engineering. IOP Publishing, vol 330, no 1, p 012017. https://doi.org/10.1088/1757-899X/330/1/01201710.1088/1757-899X/330/1/012017 ↗
21. Zhao J, Li L, Qi Y, Wang C, Luo L, Zhou C, Jiang Z, Ma X (2024) Effect of annealing temperature on the microstructure, mechanical properties and fracture behavior of AISI 304 foils. J Mater Eng Perform 33(11):5501–5516. https://doi.org/10.1007/s11665-023-08324-310.1007/s11665-023-08324-3 ↗
22. Li J, Pei W, Zhao M, Zhao D, Shi X (2022) Study of cold rolling on the transformation mechanism, microstructure, and properties of 304 austenitic stainless steel. Steel Res Int 93(4):2100341. https://doi.org/10.1002/srin.20210034110.1002/srin.202100341 ↗
23. Sun G, Du L, Hu J, Zhang B (2020) Significant influence of rolling modes on martensitic transformation, microstructural evolution and texture development in a 304 stainless steel. Mater Charact 159:110073. https://doi.org/10.1016/j.matchar.2019.11007310.1016/j.matchar.2019.110073 ↗
24. Sailaja S, Bethi RK, Pal KB, Eswara PN (2018) Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Mater Sci Eng A 725:215–227. https://doi.org/10.1016/j.msea.2018.03.09910.1016/j.msea.2018.03.099 ↗
25. Mohammadzehi S, Roostaei M, Mirzadeh H, Mahmudi R, Weißensteiner I (2024) Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel. Mater Charact. https://doi.org/10.1007/s11661-018-4583-610.1016/j.matchar.2024.11407210.1007/s11661-018-4583-610.1016/j.matchar.2024.114072 ↗
26. Amininejad A, Jamaati R, Hosseinipour SJ (2021) Influence of deformation and post-annealing treatment on the microstructure and mechanical properties of austenitic stainless steel. Trans Indian Inst Met 74(7):1799–1807. https://doi.org/10.1007/s12666-021-02277-810.1007/s12666-021-02277-8 ↗
27. Mallick P, Tewary NK, Ghosh SK, Chattopadhyay PP (2017) Microstructure-tensile property correlation in 304 stainless steel after cold deformation and austenite reversion. Mater Sci Eng A 707:488–500. https://doi.org/10.1016/j.msea.2017.09.07010.1016/j.msea.2017.09.070 ↗
28. Ashish J, Aditya V (2024) Effect of grain size and dislocation density on the work hardening behavior of SS 304. J Mater Eng Perform 2:1–18. https://doi.org/10.1007/s11665-024-09358-x10.1007/s11665-024-09358-x ↗
29. Meidan L, Junfeng N, Pandong L (2022) Experimental and numerical analysis of the uniaxial tensile properties of F321 austenitic stainless steel at different temperatures. Acta Mech Solida Sin 3:409–420. https://doi.org/10.1007/s10338-021-00304-110.1007/s10338-021-00304-1 ↗
30. Gong N, Wu HB, Niu G, Zhang D (2017) Effects of annealing temperature on nano/ultrafine-grained structure in austenite stainless steel. Mater Sci Technol 33(14):1667–1672. https://doi.org/10.1080/02670836.2017.131044210.1080/02670836.2017.1310442 ↗
31. Dickson MJ (1969) The significance of texture parameters in phase analysis by X-ray diffraction. J Appl Crystallogr 2:176–180. https://doi.org/10.1080/10408347.2014.94961610.1080/10408347.2014.949616 ↗
32. Alves JM, Brandão LP, Paula ADS (2019) Mechanically induced martensitic transformation of hot rolled and annealed 304L austenitic stainless steel at room and cryogenic temperatures. Mater Res 22:e20190150. https://doi.org/10.1590/1980-5373-mr-2019-015010.1590/1980-5373-mr-2019-0150 ↗
33. Wang M, Li H, Tian Y, Guo H, Fang X, Guo Y (2018) Evolution of grain interfaces in annealed duplex stainless steel after parallel cross rolling and direct rolling. Materials 11(5):816. https://doi.org/10.3390/ma1105081610.3390/ma11050816 ↗
34. Naghizadeh M, Mirzadeh H (2016) Microstructural evolutions during annealing of plastically deformed AISI 304 austenitic stainless steel: martensite reversion, grain refinement, recrystallization, and grain growth. Metall Mater Trans A 47:4210–4216. https://doi.org/10.1007/s11661-016-3589-110.1007/s11661-016-3589-1 ↗
35. Zheng C, Liu C, Ren M, Jiang H, Li L (2018) Microstructure and mechanical behavior of an AISI 304 austenitic stainless steel prepared by cold-or cryogenic-rolling and annealing. Mater Sci Eng A 724:260–268. https://doi.org/10.1016/j.msea.2018.03.10510.1016/j.msea.2018.03.105 ↗
36. Chen W, Wu W, Li C, Meng X (2020) Influence of deep cryogenic treatment and secondary tempering on microstructure and mechanical properties of medium-carbon low-alloy steels. J Mater Eng Perform 29(1):10–22. https://doi.org/10.1007/s11665-019-04532-y10.1007/s11665-019-04532-y ↗
37. Zheng Chengsi Hu, Lei ZQ, Yang T, Yongqiang W, Na Li, Heng J (2022) Low temperature mechanical behavior of fine-and ultrafine-grained 304 austenitic stainless steel fabricated by cryogenic-rolling and annealing. Mater Charact 191:112084. https://doi.org/10.1016/j.matchar.2022.11208410.1016/j.matchar.2022.112084 ↗
38. Michael S, Frank W, Dietmar E (2008) Deformation-induced martensitic transformation in metastable austenitic steels. Mater Sci Eng A 483:394–397. https://doi.org/10.1016/j.msea.2006.09.14010.1016/j.msea.2006.09.140 ↗
39. Mohammed M, Najla Z, Farouk E, Chérif B (2008) The effect of cold work on structure and properties of AISI 304 stainless steel. J Mater Process Technol 203(1–3):80–85. https://doi.org/10.1016/j.jmatprotec.2007.09.08010.1016/j.jmatprotec.2007.09.080 ↗
40. Huang L, Guo C, Liu Y, Liu F (2022) Grain refinement tailoring the kinetics of phase transformation in nanograined Fe alloy: smaller is slower. Scr Mater 221:114948. https://doi.org/10.1016/j.scriptamat.2022.11494810.1016/j.scriptamat.2022.114948 ↗
41. Huang LK, Liu X, Niu K, Song KX, Liu F (2024) Thermo-kinetic insights into deformation mechanism in the phase-transforming nanostructured Fe alloy. Acta Mater 279:120311. https://doi.org/10.1016/j.actamat.2024.12031110.1016/j.actamat.2024.120311 ↗
42. Shakhova I, Dudko V, Belyakov A, Tsuzaki K, Kaibyshev R (2012) Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel. Mater Sci Eng A 545:176–186. https://doi.org/10.1016/j.msea.2012.02.10110.1016/j.msea.2012.02.101 ↗
43. Shuro I, Kuo HH, Todaka Y, Umemoto M (2012) Property evolution on annealing deformed 304 austenitic stainless steel. J Mater Sci 47:8128–8133. https://doi.org/10.1007/s10853-012-6708-410.1007/s10853-012-6708-4 ↗