DataVXJournal of Materials SciencePaper
journal article·2024-08

Effects of graphite additives in polycrystalline SnS nanostructures for thermoelectric applications

T. S. Nivin, V. Vijay, E. Karvannan, M. Navaneethan, A. Karthigeyan

Journal of Materials Science· Volume 59· Issue 30
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Nanomaterials

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · 2D Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. B. E, Treml (2016) Physical and Chemical Processing Methods for Producing Nanocrystal Films with Properties by Design. pp 54-56 Cornell University, United States. https://www.proquest.com/dissertations-theses/physical-chemical-processing-methods-producing/docview/1844400860/se-2
2. Chen Z, Guo X, Zhang F et al (2020) Routes for advancing SnTe thermoelectrics. J Mater Chem A 8:16790–16813. https://doi.org/10.1039/D0TA05458E10.1039/D0TA05458E ↗
3. Zhou C, Lee YK, Yu Y et al (2021) Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal. Nat Mater 20:1378–1384. https://doi.org/10.1038/s41563-021-01064-610.1038/s41563-021-01064-6 ↗
4. Chen ZG, Shi X, Zhao LD, Zou J (2018) High-performance SnSe thermoelectric materials: Progress and future challenge. Prog Mater Sci 97:283–346. https://doi.org/10.1016/j.pmatsci.2018.04.00510.1016/j.pmatsci.2018.04.005 ↗
5. He W, Wang D, Wu H et al (2019) High thermoelectric performance in low-cost SnS 0.91 Se 0.09 crystals. Science. 2019 Sep 27; 365(6460):1418-1424. https://doi.org/10.1126/science.aax5123.10.1126/science.aax5123 ↗
6. Bux SK, Fleurial J-P, Kaner RB (2010) Nanostructured materials for thermoelectric applications. Chem Commun 46:8311. https://doi.org/10.1039/c0cc02627a10.1039/c0cc02627a ↗
7. Mehdizadeh Dehkordi A, Zebarjadi M, He J, Tritt TM (2015) Thermoelectric power factor: Enhancement mechanisms and strategies for higher performance thermoelectric materials. Mater Sci Eng R Rep 97:1–22. https://doi.org/10.1016/j.mser.2015.08.00110.1016/j.mser.2015.08.001 ↗
8. Abundance of elements in Earth’s crust. https://en.wikipedia.org/wiki/Abundance_of_elements_in_Earth%27s_crust
9. Manukumar KN, Nagaraju G, Kishore B, Madhu C, Munichandraiah N (2018) Ionic liquid-assisted hydrothermal synthesis of SnS nanoparticles: electrode materials for lithium batteries, photoluminescence and photocatalytic activities. J Energy Chem 27:806–81210.1016/j.jechem.2017.05.010 ↗
10. Asfandiyar CB, Zhao LD, Li JF (2020) High thermoelectric figure of merit ZT > 1 in SnS polycrystals. J Materiomics 6:77–85. https://doi.org/10.1016/j.jmat.2019.12.00310.1016/j.jmat.2019.12.003 ↗
11. Čermák P, Hejtmánek J, Plecháček T et al (2019) Thermoelectric properties and stability of Tl-doped SnS. J Alloys Compd 811:151902. https://doi.org/10.1016/j.jallcom.2019.15190210.1016/j.jallcom.2019.151902 ↗
12. Goldsmid HJ et al (2010) Introduction to thermoelectricity. 27-32 Springer, New York. https://link.springer.com/book/10.1007/978-3-662-49256-710.1007/978-3-642-00716-3 ↗
13. Hu X, He W, Wang D et al (2019) Thermoelectric transport properties of n-type tin sulfide. Scr Mater 170:99–105. https://doi.org/10.1016/j.scriptamat.2019.05.04310.1016/j.scriptamat.2019.05.043 ↗
14. Zhou B, Li S, Li W et al (2017) Thermoelectric properties of SnS with Na-doping. ACS Appl Mater Interfaces 9:34033–34041. https://doi.org/10.1021/acsami.7b0877010.1021/acsami.7b08770 ↗
15. Tan G, Zhao LD, Kanatzidis MG (2016) Rationally designing high-performance bulk thermoelectric materials. Chem Rev 116:12123–12149. https://doi.org/10.1021/acs.chemrev.6b0025510.1021/acs.chemrev.6b00255 ↗
16. Athithya S, Jibri KPM, Harish S et al (2023) Probing an enhanced anisotropy Seebeck coefficient and low thermal conductivity in polycrystalline Al doped SnSe nanostructure. AIP Adv 13:015311. https://doi.org/10.1063/5.013495910.1063/5.0134959 ↗
17. Chotia C, Tarachand OGS et al (2021) Enhanced thermoelectric properties of (SnS)1−x(SnO)x: x ≤ 10.79% nanocomposites prepared by polyol method. J Mater Sci Mater Electron 32:10702–10711. https://doi.org/10.1007/s10854-021-05727-710.1007/s10854-021-05727-7 ↗
18. Yang H, Jauregui LA, Zhang G et al (2012) Nontoxic and abundant copper zinc tin sulfide nanocrystals for potential high-temperature thermoelectric energy harvesting. Nano Lett 12:540–545. https://doi.org/10.1021/nl201718z10.1021/nl201718z ↗
19. Yin C, Hu Q, Wang G et al (2017) Intriguing substitution of conducting layer triggered enhancement of thermoelectric performance in misfit-layered (SnS)1.2(TiS2)2. Appl Phys Lett 110:043507. https://doi.org/10.1063/1.497522810.1063/1.4975228 ↗
20. He W, Hong T, Wang D et al (2021) Low carrier concentration leads to high in-plane thermoelectric performance in n-type SnS crystals. Sci China Mater 64:3051–3058. https://doi.org/10.1007/s40843-021-1684-010.1007/s40843-021-1684-0 ↗
21. Liu D, Yan Z, Zhao Y et al (2021) Facile MWCNTs-SnSe/PEDOT:PSS ternary composite flexible thermoelectric films optimized by cold-pressing. J Mater Res Technol 15:4452–4460. https://doi.org/10.1016/j.jmrt.2021.10.07510.1016/j.jmrt.2021.10.075 ↗
22. Zhao D, Wang X, Wu D (2017) Enhanced thermoelectric properties of graphene/Cu2SnSe3 composites. Crystals 7:71. https://doi.org/10.3390/cryst703007110.3390/cryst7030071 ↗
23. Chu F, Zhang Q, Zhou Z et al (2018) Enhanced thermoelectric and mechanical properties of Na-doped polycrystalline SnSe thermoelectric materials via CNTs dispersion. J Alloys Compd 741:756–764. https://doi.org/10.1016/j.jallcom.2018.01.17810.1016/j.jallcom.2018.01.178 ↗
24. Wang C, Chen Y, Jiang J et al (2017) Improved thermoelectric properties of SnS synthesized by chemical precipitation. RSC Adv 7:16795–16800. https://doi.org/10.1039/c7ra00373k10.1039/c7ra00373k ↗
25. Asfandiyar, Wei TR, Li Z et al (2017) Thermoelectric SnS and SnS–SnSe solid solutions prepared by mechanical alloying and spark plasma sintering: anisotropic thermoelectric properties. Sci Rep 7:43262 https://doi.org/10.1038/srep4326210.1038/srep43262 ↗
26. Jamali-Sheini F, Cheraghizade M, Yousefi R (2018) Ultrasonic synthesis of In-doped SnS nanoparticles and their physical properties. Solid State Sci 79:30–37. https://doi.org/10.1016/j.solidstatesciences.2018.03.00510.1016/j.solidstatesciences.2018.03.005 ↗
27. Tian H, Fan C, Liu G et al (2019) Ultrafast broadband photodetector based on SnS synthesized by hydrothermal method. Appl Surf Sci 487:1043–1048. https://doi.org/10.1016/j.apsusc.2019.05.17510.1016/j.apsusc.2019.05.175 ↗
28. Zhuo R, Zuo S, Quan W et al (2018) Large-size and high performance visible-light photodetectors based on two-dimensional hybrid materials SnS/RGO. RSC Adv 8:761–766. https://doi.org/10.1039/c7ra11269f10.1039/c7ra11269f ↗
29. Yang J, Yan J, Liu G et al (2019) Improved thermoelectric properties of n-type Bi2S3 via grain boundaries and in-situ nanoprecipitates. J Eur Ceram Soc 39:1214–1221. https://doi.org/10.1016/j.jeurceramsoc.2018.11.05310.1016/j.jeurceramsoc.2018.11.053 ↗
30. Chattopadhyay T, Werner A, Von Schnering HG, Pannetier J (1984) Temperature and pressure induced phase transition in IV-VI compounds. Rev Phys Appl 19:807–813. https://doi.org/10.1051/rphysap:0198400190908070010.1051/rphysap:01984001909080700 ↗
31. Chattopadhyay T, Pannetier J, Von Schnering HG (1986) Neutron diffraction study of the structural phase transition in SnS and SnSe. J Phys Chem Solids 47:879–885. https://doi.org/10.1016/0022-3697(86)90059-410.1016/0022-3697(86)90059-4 ↗
32. Sharma RC, Chang YA (1986) The S–Sn (Sulfur–Tin) system. Bull Alloy Phase Diagr 7:269–273. https://doi.org/10.1007/BF0286900410.1007/BF02869004 ↗
33. Burton LA, Walsh A (2012) Phase stability of the earth-abundant tin sulfides SnS, SnS2, and Sn2S3. J Phys Chem C 116:24262–24267. https://doi.org/10.1021/jp309154s10.1021/jp309154s ↗
34. Li K, Chen C, Lu S et al (2019) Orientation engineering in low-dimensional crystal-structural materials via seed screening. Adv Mater 31:1903914. https://doi.org/10.1002/adma.20190391410.1002/adma.201903914 ↗
35. Niu Y, Chen Y, Jiang J et al (2020) Enhanced thermoelectric performance in li doped SnS via carrier concentration optimization. In. IOP conference series: 738(1) pp 012016 materials science and engineering, Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/738/1/01201610.1088/1757-899X/738/1/012016 ↗
36. Mathews NR, Anaya HBM, Cortes-Jacome MA et al (2010) Tin sulfide thin films by pulse electrodeposition: structural, morphological, and optical properties. J Electrochem Soc 157:H337. https://doi.org/10.1149/1.328931810.1149/1.3289318 ↗
37. Parkin IP, Price LS, Hibbert TG, Molloy KC (2001) The first single source deposition of tin sulfide coatings on glass: aerosol-assisted chemical vapour deposition using [Sn (SCH2CH2S)2]. J Mater Chem 11:1486–149010.1039/b009923f ↗
38. Im HS, Myung Y, Cho YJ et al (2013) Facile phase and composition tuned synthesis of tin chalcogenide nanocrystals. RSC Adv 3:10349–1035410.1039/c3ra40869h ↗
39. Reich S, Thomsen C (2004) Raman spectroscopy of graphite. Philos Trans R Soc Math Phys Eng Sci 362:2271–2288. https://doi.org/10.1098/rsta.2004.145410.1098/rsta.2004.1454 ↗
40. Zhai X, Jin G (2016) Proposal for realizing the quantum spin Hall phase in a gapped graphene bilayer. Phys Rev B 93:205427. https://doi.org/10.1103/PhysRevB.93.20542710.1103/PhysRevB.93.205427 ↗
41. Rushbrooke GS, Wood PJ (1955) On the high-temperature susceptibility for the Heisenberg model of a ferromagnet. Proc Phys Soc Sect A 68:1161–1169. https://doi.org/10.1088/0370-1298/68/12/30910.1088/0370-1298/68/12/309 ↗
42. Kaliyaperumal A, Vellingiri L, Periyasamy G, Annamalai K (2022) Improved dehydrogenation properties of surface-oxidized LiBH4@NiO nanostructure. J Mater Sci Mater Electron 33:9144–9154. https://doi.org/10.1007/s10854-021-07148-y10.1007/s10854-021-07148-y ↗
43. Kaliyaperumal A, Periyasamy G, Annamalai K (2024) Hydrogen storage properties of surface oxidized LiBH4 system catalyzed with NiO nanorods and nanoplates. Int J Hydrogen Energy 50:812–826. https://doi.org/10.1016/j.ijhydene.2023.08.14110.1016/j.ijhydene.2023.08.141 ↗
44. Wang M, Xu H, Yang Z et al (2019) SnS nanosheets confined growth by S and N codoped graphene with enhanced pseudocapacitance for sodium-ion capacitors. ACS Appl Mater Interfaces 11:41363–41373. https://doi.org/10.1021/acsami.9b1409810.1021/acsami.9b14098 ↗
45. Jayaseelan V, Kalaiezhily RK, Shinde NB et al (2022) In situ X-ray photoelectron spectroscopy study: effect of inert Ar sputter etching on the core-level spectra of the CVD-grown tri-layer MoS2 thin films. J Mater Sci Mater Electron 33:8741–8746. https://doi.org/10.1007/s10854-021-06798-210.1007/s10854-021-06798-2 ↗
46. Vattikuti SVP, Byon C, Jeon S (2016) Enhanced photocatalytic activity of ZnS nanoparticles loaded with MoS2 nanoflakes by self-assembly approach. Phys B Condens Matter 502:103–112. https://doi.org/10.1016/j.physb.2016.08.05010.1016/j.physb.2016.08.050 ↗
47. NIST standard reference database 20, version 4.1. https://doi.org/10.18434/T4T88K10.18434/T4T88K ↗
48. Johny J, Sepulveda-Guzman S, Krishnan B et al (2017) Synthesis and properties of tin sulfide thin films from nanocolloids prepared by pulsed laser ablation in liquid. Chem Phys Chem 18:1061–1068. https://doi.org/10.1002/cphc.20160118610.1002/cphc.201601186 ↗
49. Kafashan H, Azizieh M, Nasiri Vatan H (2016) Ultrasound-assisted electrodeposition of SnS: effect of ultrasound waves on the physical properties of nanostructured SnS thin films. J Alloys Compd 686:962–968. https://doi.org/10.1016/j.jallcom.2016.06.20110.1016/j.jallcom.2016.06.201 ↗
50. Ansari MZ, Parveen N, Nandi DK et al (2019) Enhanced activity of highly conformal and layered tin sulfide (SnSx) prepared by atomic layer deposition (ALD) on 3D metal scaffold towards high performance supercapacitor electrode. Sci Rep 9:10225. https://doi.org/10.1038/s41598-019-46679-710.1038/s41598-019-46679-7 ↗
51. Yi M, Shen Z, Zhang X, Ma S (2013) Achieving concentrated graphene dispersions in water–acetone mixtures by the strategy of tailoring Hansen solubility parameters. J Phys Appl Phys 46:025301. https://doi.org/10.1088/0022-3727/46/2/02530110.1088/0022-3727/46/2/025301 ↗
52. Elangovan V, Vaiyapuri V, Aysha Parveen R et al (2023) A silver nanoparticle (AgNP)-loaded Bi2Se3 topological insulator p-n heterojunction photodiode for a near-infrared (NIR) photodetector. Nano Futur 7:025004. https://doi.org/10.1088/2399-1984/acd3ca10.1088/2399-1984/acd3ca ↗
53. Vijay V, Harish S, Archana J, Navaneethan M (2022) Synergistic effect of grain boundaries and phonon engineering in Sb substituted Bi2Se3 nanostructures for thermoelectric applications. J Colloid Interface Sci 612:97–110. https://doi.org/10.1016/j.jcis.2021.12.02710.1016/j.jcis.2021.12.027 ↗
54. Kim HS, Gibbs ZM, Tang Y et al (2015) Characterization of Lorenz number with Seebeck coefficient measurement. APL Mater 3:4. https://doi.org/10.1063/1.490824410.1063/1.4908244 ↗
55. Kang SD, Snyder GJ (2017) Transport property analysis method for thermoelectric materials: material quality factor and the effective mass model. arXiv e-prints https://doi.org/10.48550/arXiv.1710.0689610.48550/arXiv.1710.06896 ↗
56. Tan G, Zhao L-D, Shi F et al (2014) High thermoelectric performance of p-type SnTe via a synergistic band engineering and nanostructuring approach. J Am Chem Soc 136:7006–7017. https://doi.org/10.1021/ja500860m10.1021/ja500860m ↗
57. Karvannan E, Vijay V, Nivin TS et al (2024) Enhanced thermoelectric performance of iso-valent Al substituted Bi2S3 via carrier tuning and multiscale phonon scattering. Mater Chem Phys 312:128506. https://doi.org/10.1016/j.matchemphys.2023.12850610.1016/j.matchemphys.2023.128506 ↗
58. Bhattacharya S, Gunda NSH, Stern R et al (2015) Achieving optimum carrier concentrations in p-doped SnS thermoelectrics. Phys Chem Chem Phys 17:9161–9166. https://doi.org/10.1039/c4cp05991c10.1039/c4cp05991c ↗
59. Tan Q, Zhao LD, Li JF et al (2014) Thermoelectrics with earth abundant elements: low thermal conductivity and high thermopower in doped SnS. J Mater Chem A 2:17302–17306. https://doi.org/10.1039/c4ta04462b10.1039/c4ta04462b ↗
60. Rehman SU, Butt FK, Tariq Z et al (2021) Elucidating the role of lattice thermal conductivity in π-phases of IV-VI monochalcogenides for highly efficient thermoelectric performance. Int J Energy Res 45:6369–6382. https://doi.org/10.1002/er.617410.1002/er.6174 ↗
61. Zhang R, Zhou Z, Yao Q et al (2021) Significant improvement in thermoelectric performance of SnSe/SnS via nano-heterostructures. Phys Chem Chem Phys 23:3794–3801. https://doi.org/10.1039/d0cp05548d10.1039/d0cp05548d ↗
62. Huang ZC, Yao Y, Pei J et al (2019) Preparation and thermoelectric property of n-type SnS. J Inorg Mater 34(3):321–327. https://doi.org/10.15541/jim2018029310.15541/jim20180293 ↗
63. Tang H, Dong JF, Sun FH et al (2019) Adjusting Na doping via wet-chemical synthesis to enhance thermoelectric properties of polycrystalline SnS. Sci China Mater 62:1005–1012. https://doi.org/10.1007/s40843-018-9392-710.1007/s40843-018-9392-7 ↗
64. Liu WD, Shi XL, Lin ZJ et al (2020) Morphology and texture engineering enhancing thermoelectric performance of solvothermal synthesized ultralarge SnS microcrystal. ACS Appl Energy Mater 3:2192–2199. https://doi.org/10.1021/acsaem.0c0006810.1021/acsaem.0c00068 ↗
65. Yang HQ, Wang XY, Wu H et al (2019) Sn vacancy engineering for enhancing the thermoelectric performance of two-dimensional SnS. J Mater Chem C 7:3351–3359. https://doi.org/10.1039/c8tc05711g10.1039/c8tc05711g ↗
66. Kumagai Y, Burton LA, Walsh A, Oba F (2016) Electronic structure and defect physics of tin sulfides: SnS, Sn2S3, and SnS2. Phys Rev Appl 6:014009. https://doi.org/10.1103/PhysRevApplied.6.01400910.1103/PhysRevApplied.6.014009 ↗
67. Liu Y, Cao K, Liu J et al (2019) Electrodeposition of copper-doped SnS thin films and their electric transmission properties control for thermoelectric enhancement. J Mater Sci Mater Electron 30:15880–15888. https://doi.org/10.1007/s10854-019-01924-710.1007/s10854-019-01924-7 ↗
68. Ho C-H, Lin W-Y, Chao L-C et al (2020) Study of structural, thermoelectric, and photoelectric properties of layered tin monochalcogenides SnX (X = S, Se) for energy application. ACS Appl Energy Mater 3:4896–4905. https://doi.org/10.1021/acsaem.0c0048110.1021/acsaem.0c00481 ↗
69. Han G, Popuri SR, Greer HF et al (2018) Topotactic anion-exchange in thermoelectric nanostructured layered tin chalcogenides with reduced selenium content. Chem Sci 9:3828–3836. https://doi.org/10.1039/C7SC05190E10.1039/C7SC05190E ↗
70. Zandalazini CI, Albanesi EA, Oliva MI (2023) Temperature and p-doping dependence of the power factor in SnS: the role of crystalline symmetry. Phys B Condens Matter 665:414994. https://doi.org/10.1016/j.physb.2023.41499410.1016/j.physb.2023.414994 ↗
71. Vidal J, Lany S, Avezac MD et al (2012) Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS. Appl Phys Lett 100:032104. https://doi.org/10.1063/1.367588010.1063/1.3675880 ↗
72. Wu H, Lu X, Wang G et al (2018) Sodium-doped tin sulfide single crystal: a nontoxic earth-abundant material with high thermoelectric performance. Adv Energy Mater 8:1800087. https://doi.org/10.1002/aenm.20180008710.1002/aenm.201800087 ↗
73. Tan Q, Wu C-F, Sun W, Li J-F (2016) Solvothermally synthesized SnS nanorods with high carrier mobility leading to thermoelectric enhancement. RSC Adv 6:43985–43988. https://doi.org/10.1039/C6RA06874J10.1039/C6RA06874J ↗