Enhanced α → β phase transition of Ti–6Al–2Zr–1Mo–1V alloy by the electropulsing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Electromagnetic Effects on Materials · Material Properties and Failure Mechanisms · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Alabort E, Tang YT, Barba D, Reed RC (2022) Alloys-by-design: a low-modulus titanium alloy for additively manufactured biomedical implants. Acta Mater 229:117749. https://doi.org/10.1016/j.actamat.2022.11774910.1016/j.actamat.2022.117749 ↗
2. Zhao Q, Sun Q, Xin S, Chen Y, Wu C, Wang H, Xu J, Wan M, Zeng W, Zhao Y (2022) High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process. Mater Sci Eng, A 845:143260. https://doi.org/10.1016/j.msea.2022.14326010.1016/j.msea.2022.143260 ↗
3. Wang Z, Tan Y, Li N (2023) Powder metallurgy of titanium alloys: a brief review. J Alloy Compd 965:171030. https://doi.org/10.1016/j.jallcom.2023.17103010.1016/j.jallcom.2023.171030 ↗
4. Fan X, Li Q, Zhao A, Shi Y, Mei W (2017) The effect of initial structure on phase transformation in continuous heating of a ta15 titanium alloy. Metals 7:200–211. https://doi.org/10.3390/met706020010.3390/met7060200 ↗
5. Lutjering G (1998) Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys. Mater Sci Eng, A 243:43–45. https://doi.org/10.1016/S0921-5093(97)00778-810.1016/S0921-5093(97)00778-8 ↗
6. Zhou Y, Wang K, Li H, Wen X, Xin R (2023) Effect of content and configuration of equiaxed α and lamellar α on deformation mechanism and tensile properties of a near-α titanium alloy. Mater Sci Eng, A 877:145192. https://doi.org/10.1016/j.msea.2023.14519210.1016/j.msea.2023.145192 ↗
7. Lutjering G, Williams JC (2007) Titanium, 2nd edn. Springer-Verlag, Berlin Heidelberg New York, pp 203–250
8. Zhang W, Zhao WS, Li DX, Sui ML (2004) Martensitic transformation from α-Ti to β-Ti on rapid heating. Appl Phys Lett 84:4872–4874. https://doi.org/10.1063/1.176269810.1063/1.1762698 ↗
9. Kapoor R, Sunil S, Bharat Reddy G, Nagaraju S, Kolge TS, Sarkar SK, Sarita A, Biswas AS (2018) Electric current induced precipitation in maraging steel. Scripta Materialia 154:16–19. https://doi.org/10.1016/j.scriptamat.2018.05.01310.1016/j.scriptamat.2018.05.013 ↗
10. Feng J, Hang C, Tian Y, Wang C, Liu B (2018) Effect of electric current on grain orientation and mechanical properties of Cu-Sn intermetallic compounds joints. J Alloy Compd 753:203–211. https://doi.org/10.1016/j.jallcom.2018.04.04110.1016/j.jallcom.2018.04.041 ↗
11. Nguyen-Tran H-D, Oh H-S, Hong S-T, Han HN, Cao J, Ahn S-H, Chun D-M (2015) A review of electrically-assisted manufacturing. Int J of Precis Eng Manuf-Green Tech 2:365–376. https://doi.org/10.1007/s40684-015-0045-410.1007/s40684-015-0045-4 ↗
12. Graser M, Wiesenmayer S, Müller M, Merklein M (2019) Application of tailor heat treated blanks technology in a joining by forming process. J Mater Process Technol 264:259–272. https://doi.org/10.1016/j.jmatprotec.2018.09.00610.1016/j.jmatprotec.2018.09.006 ↗
13. Zhang X, Li H, Xiang Z, Li Z, Zhan M (2022) Targeted control of microstructure homogeneity of Ni-based superalloy complex component by electric pulse. Mater Lett 321:132429. https://doi.org/10.1016/j.matlet.2022.13242910.1016/j.matlet.2022.132429 ↗
14. Mori K, Maeno T, Mongkolkaji K (2013) Tailored die quenching of steel parts having strength distribution using bypass resistance heating in hot stamping. J Mater Process Technol 213:508–514. https://doi.org/10.1016/j.jmatprotec.2012.10.00510.1016/j.jmatprotec.2012.10.005 ↗
15. Hao J, Qin S, Yan L, Zhang X (2022) Realising carbide ultrafast homogenisation under pulsed electric current. Mater Sci Technol 38:689–702. https://doi.org/10.1080/02670836.2022.206281610.1080/02670836.2022.2062816 ↗
16. Rahnama A, Qin RS (2015) Electropulse-induced microstructural evolution in a ferritic–pearlitic 0.14% C steel. Scripta Materialia 96:17–20. https://doi.org/10.1016/j.scriptamat.2014.10.00810.1016/j.scriptamat.2014.10.008 ↗
17. Rahnama A, Qin RS (2015) The effect of electropulsing on the interlamellar spacing and mechanical properties of a hot-rolled 0.14% carbon steel. Mater Sci Eng A 627:145–152. https://doi.org/10.1016/j.msea.2014.12.08410.1016/j.msea.2014.12.084 ↗
18. Lu WJ, Qin RS (2016) Stability of martensite with pulsed electric current in dual-phase steels. Mater Sci Eng A 677:252–258. https://doi.org/10.1016/j.msea.2016.08.12310.1016/j.msea.2016.08.123 ↗
19. Qin RS, Samuel EI, Bhowmik A (2011) Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels. J Mater Sci 46:2838–2842. https://doi.org/10.1007/s10853-010-5155-310.1007/s10853-010-5155-3 ↗
20. Chen K, Zhan L, Xu Y, Ma B, Zeng Q, Luo S (2022) Optimizing strength and ductility in 7150 Al alloys via rapid electropulsing cyclic heat treatment. J Alloy Compd 903:163985. https://doi.org/10.1016/j.jallcom.2022.16398510.1016/j.jallcom.2022.163985 ↗
21. Xiao H, Jiang S, Shi C, Zhang K, Lu Z, Jiang J (2019) Study on the microstructure evolution and mechanical properties of an Al-Mg-Li alloy aged by electropulsing assisted ageing processing. Mater Sci Eng, A 756:442–454. https://doi.org/10.1016/j.msea.2019.04.04910.1016/j.msea.2019.04.049 ↗
22. Xu X, Zhao Y, Ma B, Zhang M (2024) Rapid precipitation of T-phase in the, aluminum alloy via cyclic electropulsing treatment. J Alloy Compd 610(2014):506–510. https://doi.org/10.1016/j.jallcom.2014.05.06310.1016/j.jallcom.2014.05.063 ↗
23. Liu X, Zhang D, Wang H, Yan Y, Zhang X (2021) Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy. Corros Sci 181:109219. https://doi.org/10.1016/j.corsci.2020.10921910.1016/j.corsci.2020.109219 ↗
24. Jiang Y, Tang G, Shek C, Zhu Y, Xu Z (2009) On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy. Acta Mater 57:4797–4808. https://doi.org/10.1016/j.actamat.2009.06.04410.1016/j.actamat.2009.06.044 ↗
25. An J, Wang L, Song X, Liu Y, Gai Z, Cao X (2018) Improving mechanism of both strength and ductility of GH4169 alloy induced by electric-pulse treatment. Mater Sci Eng, A 724:439–443. https://doi.org/10.1016/j.msea.2018.03.08710.1016/j.msea.2018.03.087 ↗
26. Hao J, Qin S, Yan L, Zhang X (2021) Breaking thermodynamic and kinetic barriers in superalloy homogenization process by electropulsing to improve mechanical properties. J Alloy Compd 873:159854. https://doi.org/10.1016/j.jallcom.2021.15985410.1016/j.jallcom.2021.159854 ↗
27. Zhang X, Li H, Zhan M (2018) Mechanism for the macro and micro behaviors of the Ni-based superalloy during electrically-assisted tension: local Joule heating effect. J Alloy Compd 742:480–489. https://doi.org/10.1016/j.jallcom.2018.01.32510.1016/j.jallcom.2018.01.325 ↗
28. Li M, Zhang B, Chen G, Li X, Zhang X, Li H (2023) Temperature dependence of electroplastic effect on reducing the ultimate stress in Ti–6Al–2Zr–1Mo–1V alloy during tension. Mater Sci Eng, A 863:144545. https://doi.org/10.1016/j.msea.2022.14454510.1016/j.msea.2022.144545 ↗
29. Jiang T, Peng L, Yi P, Lai X (2016) Flow behavior and plasticity of Ti–6Al–4V under different electrically assisted treatments. Mater Res Express 3:126505. https://doi.org/10.1088/2053-1591/3/12/12650510.1088/2053-1591/3/12/126505 ↗
30. Bao J, Chen W, Bai J, Xu J, Shan D, Guo B (2022) Local softening deformation and phase transformation induced by electric current in electrically-assisted micro-compression of Ti–6Al–4V alloy. Mater Sci Eng, A 831:142262. https://doi.org/10.1016/j.msea.2021.14226210.1016/j.msea.2021.142262 ↗
31. Zhao Y, Peng L, Lai X (2018) Influence of the electric pulse on springback during stretch U-bending of Ti6Al4V titanium alloy sheets. J Mater Process Technol 261:12–23. https://doi.org/10.1016/j.jmatprotec.2018.05.03010.1016/j.jmatprotec.2018.05.030 ↗
32. Ao D, Chu X, Yang Y, Lin S, Gao J (2018) Effect of electropulsing treatment on microstructure and mechanical behavior of Ti-6Al-4V alloy sheet under argon gas protection. Vacuum 148:230–238. https://doi.org/10.1016/j.vacuum.2017.11.01710.1016/j.vacuum.2017.11.017 ↗
33. Huang J, Xu Z, Deng Y, Peng L (2019) Electropulsing-Induced α to β Phase Transformation of Ti–6Al–4V. J Manuf Sci Eng 141:111012. https://doi.org/10.1115/1.404483510.1115/1.4044835 ↗
34. Kim M, Lee SH, Yu J, Cheon S, Byun S, Lee CS, Lee T (2023) Enhanced kinetics of microstructural evolution in Ti–6Al–4V through electropulsing treatment. J Market Res 26:8500–8508. https://doi.org/10.1016/j.jmrt.2023.09.17010.1016/j.jmrt.2023.09.170 ↗
35. Zhou Y, Xu X, Zhao Y, Yan X, Wei L, Wu Z, Wu C (2023) Introducing ω and O′ nanodomains in Ti-6Al-4V: the mechanism of accelerating α → β transformation kinetics via electropulsing. J Mater Sci Technol 162:109–117. https://doi.org/10.1016/j.jmst.2023.04.01410.1016/j.jmst.2023.04.014 ↗
36. Huang S, Zhang J, Ma Y, Zhang S, Youssef SS, Qi M, Wang H, Qiu J, Xu D, Lei J, Yang R (2019) Influence of thermal treatment on element partitioning in α+β titanium alloy. J Alloy Compd 791:575–585. https://doi.org/10.1016/j.jallcom.2019.03.33210.1016/j.jallcom.2019.03.332 ↗
37. Li X, Xu Z, Huang J, Peng L, Guo P (2020) Effects of electropulsing treatment on the element diffusion between Ti6Al4V and commercially pure titanium. J Manuf Sci Eng 142:051002. https://doi.org/10.1115/1.404650610.1115/1.4046506 ↗
38. Garay JE, Anselmi-Tamburini U, Munir ZA (2003) Enhanced growth of intermetallic phases in the Ni–Ti system by current effects. Acta Mater 51:4487–4495. https://doi.org/10.1016/S1359-6454(03)00284-210.1016/S1359-6454(03)00284-2 ↗
39. Tan P, Shen F, Li B, Zhou K (2019) A thermo-metallurgical-mechanical model for selective laser melting of Ti6Al4V. Mater Des 168:107642. https://doi.org/10.1016/j.matdes.2019.10764210.1016/j.matdes.2019.107642 ↗
40. Wang K, Kopec M, Chang S, Qu B, Liu J, Politis DJ, Wang L, Liu G (2020) Enhanced formability and forming efficiency for two-phase titanium alloys by Fast light alloys stamping technology (FAST). Mater Des 194:108948. https://doi.org/10.1016/j.matdes.2020.10894810.1016/j.matdes.2020.108948 ↗
41. Koike J, Shimoyama Y, Ohnuma I, Okamura T, Kainuma R, Ishida K, Maruyama K (2000) Stress-induced phase transformation during superplastic deformation in two-phase Ti–Al–Fe alloy. Acta Mater 48:2059–2069. https://doi.org/10.1016/S1359-6454(00)00049-510.1016/S1359-6454(00)00049-5 ↗
42. Fu X, Wang X-D, Zhao B, Zhang Q, Sun S, Wang J-J, Zhang W, Gu L, Zhang Y, Zhang W-Z, Wen W, Zhang Z, Chen L, Yu Q, Ma E (2022) Atomic-scale observation of non-classical nucleation-mediated phase transformation in a titanium alloy. Nat Mater 21:290–296. https://doi.org/10.1038/s41563-021-01144-710.1038/s41563-021-01144-7 ↗
43. Wang F, Huo D, Li S, Fan Q (2013) Inducing TiAl3 in titanium alloys by electric pulse heat treatment improves mechanical properties. J Alloy Compd 550:133–136. https://doi.org/10.1016/j.jallcom.2012.09.08210.1016/j.jallcom.2012.09.082 ↗
44. Callister WD (2007) Materials science and engineering: an introduction, 7th edn. Wiley, New York, pp 665–715
45. Porter DA, Easterling KE, Sherif MY (2009) Phase Transformation in metals and alloys, 3rd edn. Taylor & Francis Group, New York, pp 65–111
46. Zhang Z, Zhang D, Gong H, Zhang X, Zhang J (2023) Realizing recrystallization-stabilization temperature range inversion in high Mg content Al alloys via pulsed electric current. Mater Res Letters 11:179–186. https://doi.org/10.1080/21663831.2022.213357510.1080/21663831.2022.2133575 ↗
47. Landauer R, Woo JWF (1974) Driving force in electromigration. Phys Rev B 10:1266–1271. https://doi.org/10.1103/PhysRevB.10.126610.1103/PhysRevB.10.1266 ↗
48. Ho PS, Kwok T (1989) Electromigration in metals. Rep Prog Phys 52:301–348. https://doi.org/10.1088/0034-4885/52/3/00210.1088/0034-4885/52/3/002 ↗
49. Qin S, Li B, Ma R, Zhang X (2022) Accelerating irradiation-induced dislocation loop removal using electrical pulses for ultrafast performance regeneration. Metall Mater Trans A 53:4421–4432. https://doi.org/10.1007/s11661-022-06838-410.1007/s11661-022-06838-4 ↗
50. Huang X, Yan L, Zhang X (2021) Electromigration-enhanced atomic diffusion to improve coating interface bonding. Scripta Mater 202:114017. https://doi.org/10.1016/j.scriptamat.2021.11401710.1016/j.scriptamat.2021.114017 ↗
51. Wang X, Xu J, Shan D, Guo B, Cao J (2016) Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension. Int J Plast 85:230–257. https://doi.org/10.1016/j.ijplas.2016.07.00810.1016/j.ijplas.2016.07.008 ↗
52. Kino T, Endo T, Kawata S (1974) Deviations from matthiessen’s rule of the electrical resistivity of dislocations in aluminum. J Phys Soc Jpn 36:698–70510.1143/JPSJ.36.698 ↗
53. Salandro WA, Jones JJ, Bunget C, Mears L, Roth JT (2015) Electrically assisted forming: modeling and control. Springer, Cham, pp 37–5310.1007/978-3-319-08879-2 ↗
54. Zhao J, Wang G-X, Dong Y, Ye C (2017) Multiscale modeling of localized resistive heating in nanocrystalline metals subjected to electropulsing. J Appl Phys 122:085101. https://doi.org/10.1063/1.499893810.1063/1.4998938 ↗
55. Majumdar A, Carrejo JP, Lai J (1993) Thermal imaging using the atomic force microscope. Appl Phys Lett 62:2501–2503. https://doi.org/10.1063/1.10933510.1063/1.109335 ↗
56. Wang T, Guo H, Tan L, Yao Z, Zhao Y, Liu P (2011) Beta grain growth behaviour of TG6 and Ti17 titanium alloys. Mater Sci Eng, A 528:6375–6380. https://doi.org/10.1016/j.msea.2011.05.04210.1016/j.msea.2011.05.042 ↗
57. Elmer JW, Palmer TA, Babu SS, Zhang W, DebRoy T (2004) Phase transformation dynamics during welding of Ti–6Al–4V. J Appl Phys 95:8327–8339. https://doi.org/10.1063/1.173747610.1063/1.1737476 ↗