Stress corrosion cracking behavior and mechanism of high manganese steel in inshore SO2-polluted marine environment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Abdallah I, Kim T, Wu X et al (2022) Oxidation kinetics and microstructure evolution of high Mn stainless-steel alloy in CO2 at 700 °C. Corros Sci 195:110013. https://doi.org/10.1016/j.corsci.2021.11001310.1016/j.corsci.2021.110013 ↗
2. Cheng M, He P, Lei L et al (2021) Comparative studies on microstructure evolution and corrosion resistance of 304 and a newly developed high Mn and N austenitic stainless steel welded joints. Corros Sci 183:109338. https://doi.org/10.1016/j.corsci.2021.10933810.1016/j.corsci.2021.109338 ↗
3. Wang C, Lim MK, Zhang X et al (2020) Railway and road infrastructure in the belt and road Initiative countries: estimating the impact of transport infrastructure on economic growth. Transp Res Part A Policy Pract 134:288–307. https://doi.org/10.1016/j.tra.2020.02.00910.1016/j.tra.2020.02.009 ↗
4. De Cooman BC, Estrin Y, Kim SK (2018) Twinning-induced plasticity (TWIP) steels. Acta Mater 142:283–362. https://doi.org/10.1016/j.actamat.2017.06.04610.1016/j.actamat.2017.06.046 ↗
5. Zhu L, Yan Y, Li J et al (2015) Stress corrosion cracking at low loads: surface slip and crystallographic analysis. Corros Sci 100:619–626. https://doi.org/10.1016/j.corsci.2015.08.04010.1016/j.corsci.2015.08.040 ↗
6. Du XS, Su YJ, Li JX et al (2012) Stress corrosion cracking of A537 steel in simulated marine environments. Corros Sci 65:278–287. https://doi.org/10.1016/j.corsci.2012.08.02510.1016/j.corsci.2012.08.025 ↗
7. Zhang T, Hao L, Jiang Z et al (2023) Investigation of rare earth (RE) on improving the corrosion resistance of Zr-Ti deoxidized low alloy steel in the simulated tropic marine atmospheric environment. Corros Sci 221:111335. https://doi.org/10.1016/j.corsci.2023.11133510.1016/j.corsci.2023.111335 ↗
8. Liu C, Li Z, Zhao B et al (2021) Stress corrosion mechanism and susceptibility of X80 steel under a disbonded coating in an acidic soil solution. J Mater Res Technol 14:533–547. https://doi.org/10.1016/j.jmrt.2021.06.09210.1016/j.jmrt.2021.06.092 ↗
9. Wu W, Liu Z, Wang Q, Li X (2020) Improving the resistance of high-strength steel to SCC in a SO2-polluted marine atmosphere through Nb and Sb microalloying. Corros Sci 170:108693. https://doi.org/10.1016/j.corsci.2020.10869310.1016/j.corsci.2020.108693 ↗
10. Zhang T, Li Y, Li X et al (2022) Integral effects of Ca and Sb on the corrosion resistance for the high strength low alloy steel in the tropical marine environment. Corros Sci 208:110708. https://doi.org/10.1016/j.corsci.2022.11070810.1016/j.corsci.2022.110708 ↗
11. Zhang S, Yu J, Li H et al (2022) Refinement mechanism of cerium addition on solidification structure and sigma phase of super austenitic stainless steel S32654. J Mater Sci Technol 102:105–114. https://doi.org/10.1016/j.jmst.2021.06.03310.1016/j.jmst.2021.06.033 ↗
12. Zhang Q-H, Meng X-Z, Li X-R et al (2024) Effect of anions on the anodic dissolution behavior of iron: an electrochemical and density functional theory study. Corros Sci 229:111852. https://doi.org/10.1016/j.corsci.2024.11185210.1016/j.corsci.2024.111852 ↗
13. Zhang S, Hou L, Du H et al (2020) A study on the interaction between chloride ions and CO2 towards carbon steel corrosion. Corros Sci 167:108531. https://doi.org/10.1016/j.corsci.2020.10853110.1016/j.corsci.2020.108531 ↗
14. Jeong YJ, Kim SO, Park JS et al (2021) Strong and ductile Fe-24Mn-3Cr alloy resistant against erosion-corrosion. npj Mater Degrad 5:47. https://doi.org/10.1038/s41529-021-00195-010.1038/s41529-021-00195-0 ↗
15. Kang S, Yan L, Yan X et al (2022) Effect of chloride ion concentration on stress corrosion cracking and electrochemical corrosion of high manganese steel. High Temp Mater Process 41:389–402. https://doi.org/10.1515/htmp-2022-003810.1515/htmp-2022-0038 ↗
16. Shao Z, Yu D, Shao D et al (2024) A protective role of Cl− ion in corrosion of stainless steel. Corros Sci 226:111631. https://doi.org/10.1016/j.corsci.2023.11163110.1016/j.corsci.2023.111631 ↗
17. Lasek S, Mazancova E (2013) Corrosion behaviour of selected high manganese austenitic steels. In: Metal 2013: 22nd International conference on metallurgy and materials, pp 610–615
18. Wang B, Mu Y, Shen F et al (2024) Identification of corrosion factors in blast furnace gas pipe network with corrosion big data online monitoring technology. Corros Sci 230:111906. https://doi.org/10.1016/j.corsci.2024.11190610.1016/j.corsci.2024.111906 ↗
19. Yang S, Che Z, Liu W et al (2023) Influence mechanism of heat treatment on corrosion resistance of Te-containing 15–5PH stainless steel. Corros Sci 225:111610. https://doi.org/10.1016/j.corsci.2023.11161010.1016/j.corsci.2023.111610 ↗
20. Liu C, Li C, Che Z et al (2023) Influence of cementite coarsening on the corrosion resistance of high strength low alloy steel. npj Mater Degrad 7:43. https://doi.org/10.1038/s41529-023-00358-110.1038/s41529-023-00358-1 ↗
21. Liu C, Li Y, Cheng X, Li X (2022) Recent advances on the corrosion resistance of low-density steel: a review. Acta Metall Sin 35:1055–1067. https://doi.org/10.1007/s40195-021-01369-010.1007/s40195-021-01369-0 ↗
22. Chen T, Wang B, Sun L et al (2024) The coupling mechanism of shrinkage defects and graphite on the corrosion resistance of ductile iron. Corros Sci 227:111798. https://doi.org/10.1016/j.corsci.2023.11179810.1016/j.corsci.2023.111798 ↗
23. Wang H, Yu H, Kondo S et al (2020) Corrosion behaviour of Al-added high Mn austenitic steels in molten lead bismuth eutectic with saturated and low oxygen concentrations at 450 ℃. Corros Sci 175:108864. https://doi.org/10.1016/j.corsci.2020.10886410.1016/j.corsci.2020.108864 ↗
24. Chiter F, Costa D, Maurice V, Marcus P (2023) Corrosion inhibition at emergent grain boundaries studied by DFT for 2-mercaptobenzothiazole on bi-crystalline copper. npj Mater Degrad 7:5. https://doi.org/10.1038/s41529-022-00314-510.1038/s41529-022-00314-5 ↗
25. Corkhill CL, Mann C, Eskelsen JR et al (2022) Surface interfacial analysis of simulant high level nuclear waste glass dissolved in synthetic cement solutions. npj Mater Degrad 6:67. https://doi.org/10.1038/s41529-022-00279-510.1038/s41529-022-00279-5 ↗
26. Cui Y-W, Chen L-Y, Chu Y-H et al (2023) Metastable pitting corrosion behavior and characteristics of passive film of laser powder bed fusion produced Ti–6Al–4V in NaCl solutions with different concentrations. Corros Sci 215:111017. https://doi.org/10.1016/j.corsci.2023.11101710.1016/j.corsci.2023.111017 ↗
27. Feng H, Li H-B, Dai J et al (2022) Why CoCrFeMnNi HEA could not passivate in chloride solution?–A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying. Corros Sci 204:110396. https://doi.org/10.1016/j.corsci.2022.11039610.1016/j.corsci.2022.110396 ↗
28. Alcántara J, Chico B, Díaz I et al (2015) Airborne chloride deposit and its effect on marine atmospheric corrosion of mild steel. Corros Sci 97:74–88. https://doi.org/10.1016/j.corsci.2015.04.01510.1016/j.corsci.2015.04.015 ↗
29. Han W, Pan C, Wang Z, Yu G (2014) A study on the initial corrosion behavior of carbon steel exposed to outdoor wet-dry cyclic condition. Corros Sci 88:89–100. https://doi.org/10.1016/j.corsci.2014.07.03110.1016/j.corsci.2014.07.031 ↗
30. Liu TL, Zheng KH, Lin YF, Luo ZC (2021) Effect of second-phase particles on the oxidation behaviour of a high-manganese austenitic heat-resistant steel. Corros Sci 182:109284. https://doi.org/10.1016/j.corsci.2021.10928410.1016/j.corsci.2021.109284 ↗
31. Liu Z, Zhang LM, Chen WQ et al (2023) Effect of chloride ion on the corrosion behavior of SiN stainless steel in concentrated hot nitric acid media. Corros Sci 225:111604. https://doi.org/10.1016/j.corsci.2023.11160410.1016/j.corsci.2023.111604 ↗
32. Lu JC, Wang ZB, Hu HX, Zheng YG (2024) Understanding localized corrosion mechanism of 90/10 copper-nickel alloy in flowing NaCl solution induced by partial coverage of corrosion products films. Corros Sci 227:111716. https://doi.org/10.1016/j.corsci.2023.11171610.1016/j.corsci.2023.111716 ↗
33. Nishimura R, Shiraishi D, Maeda Y (2004) Hydrogen permeation and corrosion behavior of high strength steel MCM 430 in cyclic wet–dry SO2 environment. Corros Sci 46:225–243. https://doi.org/10.1016/S0010-938X(03)00141-010.1016/S0010-938X(03)00141-0 ↗
34. Yang S, Che Z, Liu C et al (2023) Mechanism of the dual effect of Te addition on the localised corrosion resistance of 15–5PH stainless steel. Corros Sci 212:110970. https://doi.org/10.1016/j.corsci.2023.11097010.1016/j.corsci.2023.110970 ↗
35. Chen T, Sun L, Li Q et al (2023) Comprehensive analysis of corrosion failure of blast furnace gas pipeline in a steel plant. Eng Fail Anal 154:107651. https://doi.org/10.1016/j.engfailanal.2023.10765110.1016/j.engfailanal.2023.107651 ↗
36. Luo ZC, Cui YX, Liu ZX et al (2024) Oxidation mechanism of high-manganese heat-resistant steels reinforced by in situ second-phase particles. Corros Sci 227:111720. https://doi.org/10.1016/j.corsci.2023.11172010.1016/j.corsci.2023.111720 ↗
37. Zhen-Wu BY, Prentice DP, Ryan JV et al (2020) zeo19: A thermodynamic database for assessing zeolite stability during the corrosion of nuclear waste immobilization glasses. npj Mater Degrad 4:2. https://doi.org/10.1038/s41529-019-0106-110.1038/s41529-019-0106-1 ↗
38. Chiter F, Costa D, Maurice V, Marcus P (2021) Corrosion inhibition of locally de-passivated surfaces by DFT study of 2-mercaptobenzothiazole on copper. npj Mater Degrad 5:52. https://doi.org/10.1038/s41529-021-00198-x10.1038/s41529-021-00198-x ↗
39. Hubbard CR, Snyder RL (1988) RIR–Measurement and use in quantitative XRD. Powder Diffr 3:74–77. https://doi.org/10.1017/S088571560001325710.1017/S0885715600013257 ↗
40. Wu W, Cheng X, Zhao J, Li X (2020) Benefit of the corrosion product film formed on a new weathering steel containing 3% nickel under marine atmosphere in Maldives. Corros Sci 165:108416. https://doi.org/10.1016/j.corsci.2019.10841610.1016/j.corsci.2019.108416 ↗
41. Yue X, Ren Y, Huang L et al (2022) The role of Cl- in the formation of the corrosion products and localised corrosion of 15Cr martensite stainless steel under an CO2-containing extreme oilfield condition. Corros Sci 194:109935. https://doi.org/10.1016/j.corsci.2021.10993510.1016/j.corsci.2021.109935 ↗
42. Akiyama E, Matsukado K, Wang M, Tsuzaki K (2010) Evaluation of hydrogen entry into high strength steel under atmospheric corrosion. Corros Sci 52:2758–2765. https://doi.org/10.1016/j.corsci.2009.11.04610.1016/j.corsci.2009.11.046 ↗
43. Liu ZY, Hao WK, Wu W et al (2019) Fundamental investigation of stress corrosion cracking of E690 steel in simulated marine thin electrolyte layer. Corros Sci 148:388–396. https://doi.org/10.1016/j.corsci.2018.12.02910.1016/j.corsci.2018.12.029 ↗
44. Han W, Pan C, Wang Z, Yu G (2015) Initial atmospheric corrosion of carbon steel in industrial environment. J Mater Eng Perform 24:864–874. https://doi.org/10.1007/s11665-014-1329-510.1007/s11665-014-1329-5 ↗
45. Frankel GS (1997) Pitting corrosion of metals; a summary of the critical factors. In: Proceedings of the international symposium on pits and pores: formation, properties, and significance for advanced luminescent materials, pp 1–26
46. Kuah KX, Blackwood DJ (2023) Investigating molybdenum’s sulphur scavenging ability for MoS 2 formation in preventing pitting corrosion of stainless steels. npj Mater Degrad 7:80. https://doi.org/10.1038/s41529-023-00401-110.1038/s41529-023-00401-1 ↗
47. Majérus O, Lehuédé P, Biron I et al (2020) Glass alteration in atmospheric conditions: crossing perspectives from cultural heritage, glass industry, and nuclear waste management. npj Mater Degrad 4:27. https://doi.org/10.1038/s41529-020-00130-910.1038/s41529-020-00130-9 ↗
48. Minola M, Roche V, Rouve L-L et al (2023) Laboratory studies of ship hull’s material degradation scenarios to optimize a cathodic protection modelling software. npj Mater Degrad 7:24. https://doi.org/10.1038/s41529-023-00341-w10.1038/s41529-023-00341-w ↗
49. O’Brien SP, Christudasjustus J, Esteves L et al (2021) A low-cost, low-density, and corrosion resistant AlFeMnSi compositionally complex alloy. npj Mater Degrad 5:12. https://doi.org/10.1038/s41529-021-00158-510.1038/s41529-021-00158-5 ↗
50. Gong K, Wu M, Liu G (2020) Stress corrosion cracking behavior of rusted X100 steel under the combined action of Cl− and HSO3− in a wet–dry cycle environment. Corros Sci 165:108382. https://doi.org/10.1016/j.corsci.2019.10838210.1016/j.corsci.2019.108382 ↗
51. Yadav AP, Nishikata A, Tsuru T (2004) Electrochemical impedance study on galvanized steel corrosion under cyclic wet–dry conditions––influence of time of wetness. Corros Sci 46:169–181. https://doi.org/10.1016/S0010-938X(03)00130-610.1016/S0010-938X(03)00130-6 ↗
52. Akiyama E, Li S, Shinohara T et al (2011) Hydrogen entry into Fe and high strength steels under simulated atmospheric corrosion. Electrochim Acta 56:1799–1805. https://doi.org/10.1016/j.electacta.2010.09.04310.1016/j.electacta.2010.09.043 ↗