Mechanical and ablation properties of 3D orthogonal woven C/C-SiC composite based on high-solid-loading slurry impregnation
Source abstract
Abstract
A three-dimensional orthogonal woven C/C-SiC composite was successfully prepared by high-solid-loading slurry impregnation combined with precursor infiltration and pyrolysis. The microstructure, mechanical properties and ablation behavior of the C/C-SiC composite were investigated. The slurry impregnation and the precursor infiltration and pyrolysis acted as fast filling and supplementary densification, respectively. Based on a three-dimensional orthogonal woven C/C preform, the C/C-SiC composite had excellent mechanical properties with bending strength and fracture toughness of 364.46 and 22.86 MPa·m1/2. The mass and linear ablation rates of the C/C-SiC composite were 3.21 mg/s and 4.93 μm/s, respectively, after ablation under an oxyacetylene flame for 300 s. The good ablation performance was attributed to the passive oxidation of SiC at high temperature and high oxygen partial pressure, and the pitting caused by SiO2 accelerated the failure of carbon fibers.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Hanzawa S (2012) Mechanism of synthesizing dense Si-SiC matrix C/C composites. J Mater Sci 47(2):833–84410.1007/s10853-011-5861-5 ↗
2. Niu ZB, Chen SA, Li Y, Xiao P, Yang ZM, Tong YG, Almeida RSM (2022) A damage constitutive model for the nonlinear mechanical behavior of C/SiC composites during mechanical cyclical loading/unloading. Compos A 161:10707210.1016/j.compositesa.2022.107072 ↗
3. Chen XF, Li SJ, Chen ZJ, Wen N (2011) The effect of high-temperature heat-treatment on the strength of C/C-SiC joints. J Mater Sci 46(3):707–71410.1007/s10853-010-4798-4 ↗
4. Dong SL, Hu XY, Yuan QL, Huang FL (2022) C/C-SiC composites derived from single-source poly(silylene–acetylene) precursors. Int J Appl Ceram Technol 19(6):3202–321210.1111/ijac.14119 ↗
5. Mei H, Liang C, Zhang D, Chen C, Cheng L (2019) Controlled deposition of density defects for understanding mechanical reduction on 2D C/SiC composites. Comp Part B 161:241–25110.1016/j.compositesb.2018.10.085 ↗
6. Xu H, Zhang L, Cheng L (2015) The effect of Z-yarn density on the in-plane shear property of three-dimensional stitched carbon fiber reinforced silicon carbide composites. Comp Sci Technol 106:120–12610.1016/j.compscitech.2014.11.008 ↗
7. Luo X, He J, Liu X, Xu Y, Li J, Guo X, Wang Q, Li L (2022) Design, fabrication, and mechanical properties of T-700TM multiaxial-warp-knitting-needled—C/SiC COMPOSITE AND PIN. Materials 15(6):233810.3390/ma15062338 ↗
8. Shi-gang A, Wei-li S, Yan-fei C (2021) Stress field and damage evolution in C/SiC woven composites: image-based finite element analysis and in situ X-ray computed tomography tests. J Eur Ceram Soc 41(4):2323–233410.1016/j.jeurceramsoc.2020.12.026 ↗
9. Wan F, Liu R, Wang Y, Cao Y, Zhang C, Marrow TJ (2019) Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation. Ceram Int 45(5):5601–561210.1016/j.ceramint.2018.12.020 ↗
10. Xu H, Li L, Li GD, Zheng RX, Yao XY, Ma CL (2022) In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation. J Mater Sci 57(24):11077–1109110.1007/s10853-022-07272-y ↗
11. Hu W, Huang J, Zhang C, Ren T, Guan T, Wu K, Wang B, Aamir RM, Sheikh MZ, Suo T (2020) Effect of shear strain rate on interlaminar shear behavior of 2D-C/SiC composites: a damage transition from notch ends initiation to gauge section initiation. Carbon 167:770–78410.1016/j.carbon.2020.05.067 ↗
12. Duan J, Zhang M, Chen P, Li Z, Pang L, Xiao P, Li Y (2021) Tribological behavior and applications of carbon fiber reinforced ceramic composites as high-performance frictional materials. Ceram Int 47(14):19271–1928110.1016/j.ceramint.2021.02.187 ↗
13. Chen X, Chen L, Zhang C, Song L, Zhang D (2016) Three-dimensional needle-punching for composites-a review. Comp Part A 85:12–3010.1016/j.compositesa.2016.03.004 ↗
14. Fan S, Zhang L, Xu Y, Cheng L, Lou H, Zhang J, Yu L (2007) Microstructure and properties of 3D needle punched carbon/silicon carbide brake materials. Comp Sci Technol 67(11–12):2390–239810.1016/j.compscitech.2007.01.008 ↗
15. Xue R, Wang Z, Zhang Z, Zhang N, Zhang Y, Xia H, Xiao Z, Wang J (2022) Anisotropic tribological behavior of LSI based 2.5D needle-punched carbon fiber reinforced Cf/C-SiC composites. Ceram Int 48(15):21324–2133310.1016/j.ceramint.2022.04.071 ↗
16. Liu C, Zhang X, Wang G, Wang Z, Gao L (2021) New ablation evolution behaviors in micro-hole drilling of 2.5D Cf/SiC composites with millisecond laser. Ceram Int 47(21):29670–2968010.1016/j.ceramint.2021.07.138 ↗
17. Mouritz AP, Bannister MK, Falzon PJ, Leong KH (1999) Review of applications for advanced three-dimensional fibre textile composites. Compos A 30(12):1445–146110.1016/S1359-835X(99)00034-2 ↗
18. Tulbez S, Esen Z, Dericioglu AF (2020) Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites. Adv Comp Hybrid Mater 3(2):177–18610.1007/s42114-020-00155-3 ↗
19. Mei H, Cheng L (2009) Comparison of the mechanical hysteresis of carbon/ceramic-matrix composites with different fiber preforms. Carbon 47(4):1034–104210.1016/j.carbon.2008.12.025 ↗
20. Du XB, Li DS, Wei QH, Jiang L (2022) High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C. J Eur Ceram Soc 42(6):3036–304310.1016/j.jeurceramsoc.2022.01.044 ↗
21. Xu J, Guo LJ, Wang HH, Li W, Liu NK, Wang TY (2022) Influence of graphitization temperature on microstructure and mechanical property of C/C-SiC composites with highly textured pyrolytic carbon. J Eur Ceram Soc 42(5):1893–190310.1016/j.jeurceramsoc.2021.12.046 ↗
22. Friess M, Boyukbas M, Vogel F, Cepli D, Schatz O, Suss F, Shi Y (2022) Manufacture and thermomechanical characterization of wet filament wound C/C-SiC composites. Int J Appl Ceram Technol 19(1):34–4410.1111/ijac.13785 ↗
23. Fan X, Dang X, Ma Y, Yin X, Zhang L, Cheng L (2019) Microstructure, mechanical and ablation behaviour of C/SiC-Si with different preforms. Ceram Int 45(17):23104–2311010.1016/j.ceramint.2019.08.004 ↗
24. Li W, Xiang Y, Wang S, Ma Y, Chen Z (2013) Ablation behavior of three-dimensional braided C/SiC composites by oxyacetylene torch under different environments. Ceram Int 39(1):463–46810.1016/j.ceramint.2012.06.049 ↗
25. Lei L, He-jun L, Kui H, Xiao-hong S, Ke-zhi L, Chang N (2015) Effect of SiC location on the ablation of C/C-SiC composites in two heat fluxes. J Mater Sci Technol 31(4):345–35410.1016/j.jmst.2014.11.021 ↗
26. Vinci A, Zoli L, Landi E, Sciti D (2017) Oxidation behaviour of a continuous carbon fibre reinforced ZrB2-SiC composite. Corros Sci 123:129–13810.1016/j.corsci.2017.04.012 ↗
27. Liégaut C, Bertrand P, Maillél, Rebillat F (2022) UHTC-based matrix as protection for Cf/C composites: original manufacturing, microstructural characterisation and oxidation behaviour at temperature above 2000 °C. J Eur Ceram Soc, 42(7):3168–318210.1016/j.jeurceramsoc.2022.02.029 ↗
28. Baker B, Rubio V, Ramanujam P, Binner J, Hussain A, Ackerman T, Brown P, Dautremont I (2019) Development of a slurry injection technique for continuous fibre ultra-high temperature ceramic matrix composites. J Eur Ceram Soc 39(14):3927–393710.1016/j.jeurceramsoc.2019.05.070 ↗
29. Zhu Y, Huang Z, Dong S, Yuan M, Jiang D (2008) Manufacturing 2D carbon-fiber-reinforced SiC matrix composites by slurry infiltration and PIP process. Ceram Int 34(5):1201–120510.1016/j.ceramint.2007.02.014 ↗
30. Tang Z, Yi M, Xiang Q, Du Y, Peng K (2021) Mechanical and ablation properties of a C/C-HfB2-SiC composite prepared by high-solid-loading slurry impregnation combined with precursor infiltration and pyrolysis. J Eur Ceram Soc 41(13):6160–617010.1016/j.jeurceramsoc.2021.06.055 ↗
31. Tang Z, Yi M, Zhou Y, Liu R, Peng K (2021) Effect of high-temperature heat treatment on the microstructure and mechanical behavior of PIP-based C/C-SiC composites with SiC filler. J Eur Ceram Soc 41(15):7610–761910.1016/j.jeurceramsoc.2021.08.032 ↗
32. Fu-hai L, Mao-zhong Y, Li-ping R, Yi-cheng G, Ke P (2021) Effect of silane grafted h-BN fillers on microstructure and mechanical properties of CVI-based C/C-BN composites. Mater Charact 171:11076510.1016/j.matchar.2020.110765 ↗
33. Liu Y, Cheng L, Zhang L, Yang W, Zhou S, Zhang W (2011) Fracture behavior and mechanism of 2D C/SiC-BCx composite at room temperature. Mater Sci Eng A 528:1436–144110.1016/j.msea.2010.10.045 ↗
34. National Standard Committee of China (1996) GJB323A-96: Measurement Standard of Ablation Properties of Materials. Beijing (in Chinese).
35. Ran L, Rao F, Peng K, yin H, Yi M (2019) Preparation and properties of C/C-ZrB2-SiC composites by high-solid-loading slurry impregnation and polymer infiltration and pyrolysis (PIP). Trans Nonferrous Metals Soc China 29(10):2141–215010.1016/S1003-6326(19)65120-4 ↗
36. Zhou C, Zhang C, Hu H, Zhang Y, Wang Z (2008) Microstructure and mechanical properties of C/SiC composites prepared at low temperatures. Key Eng Mater 368–372:849–85110.4028/www.scientific.net/KEM.368-372.849 ↗
37. Tang S, Deng J, Wang S, Liu W (2007) Fabrication and characterization of C/SiC composites with large thickness, high density and near-stoichiometric matrix by heaterless chemical vapor infiltration. Mater Sci Eng A 465:290–29410.1016/j.msea.2007.02.037 ↗
38. Yin D, Deng Y, Ma Y, Fan X (2021) Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite. Ceram Int 47(17):25067–2507310.1016/j.ceramint.2021.05.237 ↗
39. Xu J, Guo L, Wang H, Li W, Liu N, Wang T (2022) Influence of graphitization temperature on microstructure and mechanical property of C/C-SiC composites with highly textured pyrolytic carbon. J Eur Ceram Soc 42(5):1893–190310.1016/j.jeurceramsoc.2021.12.046 ↗
40. Fan S, He L, Yang C, Li H, Wang S, Lin Y, Zou B, Deng J, Zhang L, Cheng L (2017) Effect of B4C on the microstructure and properties of B4C modified three dimensional needled C/C-SiC composites. Mater Sci Eng A 706:201–21010.1016/j.msea.2017.09.008 ↗
41. Xiao-meng F, Xiao-wei Y (2014) Microstructure and properties of carbon fiber reinforced SiC matrix composites containing Ti3SiC2. Adv Eng Mater 16(6):670–68310.1002/adem.201400081 ↗
42. Mao WG, Chen J, Si MS, Zhang RF, Peng ZB, Dai CY, Ma QS, Fang DN (2016) Study of mechanical properties and cracking extension resistance behavior of C/SiC composites by single edge notched beam and digital image correlation techniques. Mater Sci Eng, A 649:222–22810.1016/j.msea.2015.09.101 ↗
43. Liao J, Chen Z, Li B, Wang Y, Yu S, Guan T, Yuan X, Liu J, Tang K, Sheng CUI (2019) Effect of fiber heat treatment on microstructure and mechanical properties of 2.5D T700 carbon fiber reinforced SiC composites. Mater Res Exp 6(1):01561110.1088/2053-1591/aae99b ↗
44. Mungiguerra S, di Martino GD, Cecere A, Savino R, Zoli L, Silvestroni L, Sciti D (2020) Ultra-high-temperature testing of sintered ZrB2-based ceramic composites in atmospheric re-entry environment. Int J Heat Mass Transf 156:11991010.1016/j.ijheatmasstransfer.2020.119910 ↗
45. Luo L, Wang Y, Liu L, Duan L, Wang G, Lu Y (2016) Ablation behavior of C/SiC composites in plasma wind tunnel. Carbon 103:73–8310.1016/j.carbon.2016.02.085 ↗
46. Panerai F, Helber B, Chazot O, Balat-Pichelin M (2014) Surface temperature jump beyond active oxidation of carbon/silicon carbide composites in extreme aerothermal conditions. Carbon 71:102–11910.1016/j.carbon.2014.01.018 ↗
47. Peng Z, Miao C, Sun W, Xu Y, Chen H, Liu Y, Zhang H, Xiong X (2022) High-temperature thermal stability of C/C-ZrC-SiC composites via region labeling method. Trans Nonferrous Metals Soc China 32(10):3349–336110.1016/S1003-6326(22)66024-2 ↗
48. Ge J, Li W, Chao XJ, Wang HH, Wang ZW, Qi LH (2022) Experiment-based numerical evaluation of the surface recession of C/C-SiC composites under the high-energy laser. Ceram Int 48(23):34550–3456310.1016/j.ceramint.2022.08.039 ↗
49. Hald H (2003) Operational limits for reusable space transportation systems due to physical boundaries of C/SiC materials. Aerosp Sci Technol 7(7):551–55910.1016/S1270-9638(03)00054-3 ↗