Effect of multi-doping on the tribological behavior of MoN (Ag)-based films in a wide temperature range
Source abstract
Abstract
The addition of soft metal silver in nitride films can achieve very low-friction coefficient in a wide temperature range through the lubrication phase of silver, Magnéli and silver-containing complex oxides. However, the high mobility of silver at moderate and high temperature contributes to a short cycle of low-friction coefficient dominated by Ag. In this study, W-, Ta-doped MoN (Ag) composite films were designed and deposited on the surface of superalloys by sputtering to study their tribological behavior at wide temperature range. The results showed that a small amount of W or Ta not only improved the mechanical properties and wear resistance of MoN (Ag) films, but also suppressed the migration of silver effectively, prolonged the low-friction coefficient (about 0.08 and 0.12) cycle at 600 °C by 1.5 times and 2.4 times, respectively. Based on this, the design of multi-element doping system provides a feasible solution for the rapid depletion of Ag lubricating phase in MoN (Ag) films in the friction process at moderate and temperatures friction.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Wei M, Wang S, Cui X (2012) Comparative research on wear characteristics of spheroidal graphite cast iron and carbon steel. Wear 274–275:84–93. https://doi.org/10.1016/j.wear.2011.08.01510.1016/j.wear.2011.08.015 ↗
2. Muratore C, Voevodin A (2006) Molybdenum disulfide as a lubricant and catalyst in adaptive nanocomposite coatings. Surf Coat Technol 201(7):4125–4130. https://doi.org/10.1016/j.surfcoat.2006.08.01410.1016/j.surfcoat.2006.08.014 ↗
3. Voevodin A, Zabinski J (2005) Nanocomposite and nanostructured tribological materials for space applications - ScienceDirect. Compos Sci Technol 65(5):741–748. https://doi.org/10.1016/j.compscitech.2004.10.00810.1016/j.compscitech.2004.10.008 ↗
4. Aouadi S, Singh D, Stone D et al (2010) Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000 °C. Acta Mater 58(16):5326–5331. https://doi.org/10.1016/j.actamat.2010.06.00610.1016/j.actamat.2010.06.006 ↗
5. Muratore C, Voevodin A, Hu J, Zabinski J (2006) Tribology of adaptive nanocomposite Yttria-stabilized zirconia coatings containing silver and molybdenum from 25 to 700 °C. Wear 261(7–8):797–805. https://doi.org/10.1016/j.wear.2006.01.02910.1016/j.wear.2006.01.029 ↗
6. Voevodin A, Muratore C, Aouadi S (2014) Hard coatings with high temperature adaptive lubrication and contact thermal management: review. Surf Coat Technol 257:247–265. https://doi.org/10.1016/j.surfcoat.2014.04.04610.1016/j.surfcoat.2014.04.046 ↗
7. Aouadi S, Gao H, Martini A, Scharf T, Muratore C (2014) Lubricious oxide coatings for extreme temperature applications: a review. Surf Coat Technol 257:266–277. https://doi.org/10.1016/j.surfcoat.2014.05.06410.1016/j.surfcoat.2014.05.064 ↗
8. Lukaszkowicz K, Sondor J, Kriz A et al (2010) Structure, mechanical properties and corrosion resistance of nanocomposite coatings deposited by PVD technology onto the X6CrNiMoTi17-12-2 and X40CrMoV5-1 steel substrates. J Mater Sci 45:1629–1637. https://doi.org/10.1007/s10853-009-4140-110.1007/s10853-009-4140-1 ↗
9. Wang S, Antonio D, Yu X et al (2015) The hardest superconducting metal nitride. Sci Rep 5:13733. https://doi.org/10.1038/srep1373310.1038/srep13733 ↗
10. Franz R, Mitterer C (2013) Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review. Surf Coat Technol 228:1–13. https://doi.org/10.1016/j.surfcoat.2013.04.03410.1016/j.surfcoat.2013.04.034 ↗
11. Ding L, Hu S, Quan X, Shen J (2017) Effect of aging treatment on microstructure and properties of VN alloy reinforced co-based composite coatings by laser cladding. Mater Char 129:80–87. https://doi.org/10.1016/j.matchar.2017.04.03010.1016/j.matchar.2017.04.030 ↗
12. Zhao H, Yu L, Mu C, Ye F (2016) Structure and properties of Si-implanted VN coatings prepared by RF magnetron sputtering. Mater Char 117:65–75. https://doi.org/10.1016/j.matchar.2016.04.02010.1016/j.matchar.2016.04.020 ↗
13. Fallqvist M, Olsson M (2013) The influence of surface defects on the mechanical and tribological properties of VN-based arc-evaporated coatings. Wear 297(1–2):1111–1119. https://doi.org/10.1016/j.wear.2012.11.01210.1016/j.wear.2012.11.012 ↗
14. An J, Liu YB, Lu Y et al (2003) The formation of reacted film and its influence on tribological properties of extruded Al-Si-Cu-20-25Pb alloy under dry sliding. J Mater Sci 38:1975–1982. https://doi.org/10.1023/A:102352922056710.1023/A:1023529220567 ↗
15. Gassner G, Mayrhofer P, Kutschej K, Mitterer C, Kathrein M (2006) Magnéli phase formation of PVD Mo-N and W-N coatings. Surf Coat Technol 201(6):3335–3341. https://doi.org/10.1016/j.surfcoat.2006.07.06710.1016/j.surfcoat.2006.07.067 ↗
16. Gulbinski W, Suszko T (2006) Thin films of MoO3-Ag2O binary oxides—the high temperature lubricants. Wear 261(7–8):867–873. https://doi.org/10.1016/j.wear.2006.01.00810.1016/j.wear.2006.01.008 ↗
17. Stone D, Liu J, Singh D, Muratore C et al (2010) Layered atomic structures of double oxides for low shear strength at high temperatures. Scr Mater 62(10):735–738. https://doi.org/10.1016/j.scriptamat.2010.02.00410.1016/j.scriptamat.2010.02.004 ↗
18. Gulbinski W, Suszko T (2006) Thin films of Mo2N/Ag nanocomposite—the structure, mechanical and tribological properties. Surf Coat Technol 201(3–4):1469–1476. https://doi.org/10.1016/j.surfcoat.2006.02.01710.1016/j.surfcoat.2006.02.017 ↗
19. Guo H, Han M, Chen W, Lu C, Li B et al (2017) Microstructure and properties of VN/Ag composite films with various silver content. Vacuum 137:97–103. https://doi.org/10.1016/j.vacuum.2016.12.02010.1016/j.vacuum.2016.12.020 ↗
20. Kutschej K, Mitterer C, Mulligan C, Gall D (2006) High-temperature tribological behavior of CrN-Ag self-lubricating coatings. Adv Eng Mater 8(11):1125–1129. https://doi.org/10.1002/adem.20060013110.1002/adem.200600131 ↗
21. Stone D, Migas J, Martini A, Smith T et al (2012) Adaptive NbN/Ag coatings for high temperature tribological applications. Surf Coat Technol 206(19–20):4316–4321. https://doi.org/10.1016/j.surfcoat.2012.04.05410.1016/j.surfcoat.2012.04.054 ↗
22. Deng B, Tao Y, Zhu X, Qin H (2014) The oxidation behavior and tribological properties of Si-implanted TiN coating. Vacuum 99:216–224. https://doi.org/10.1016/j.vacuum.2013.06.00610.1016/j.vacuum.2013.06.006 ↗
23. Shi J, Muders C, Kumar A, Jiang X et al (2012) Study on nanocomposite Ti-Al-Si-Cu-N films with various Si contents deposited by cathodic vacuum arc ion plating. Appl Surf Sci 258(24):9642–9649. https://doi.org/10.1016/j.apsusc.2012.06.00210.1016/j.apsusc.2012.06.002 ↗
24. Donnet C, Erdemir A (2004) Historical developments and new trends in tribological and solid lubricant coatings. Surf Coat Technol 180–181:76–84. https://doi.org/10.1016/j.surfcoat.2003.10.02210.1016/j.surfcoat.2003.10.022 ↗
25. Wang W, Pu J, Cai Z et al (2020) Insights into friction properties and mechanism of self-lubricating MoVN-Ag films at high temperature. Vacuum 176:109332. https://doi.org/10.1016/j.vacuum.2020.10933210.1016/j.vacuum.2020.109332 ↗
26. Wang W, Zheng S, Pu J, Cai Z et al (2020) Microstructure, mechanical and tribological properties of Mo-V-N films by reactive magnetron sputtering. Surf Coat Technol 387:125532. https://doi.org/10.1016/j.surfcoat.2020.12553210.1016/j.surfcoat.2020.125532 ↗
27. Qian J, Li S, Pu J, Cai Z et al (2019) Effect of heat treatment on structure and properties of molybdenum nitride and molybdenum carbonitride films prepared by magnetron sputtering. Surf Coat Technol 374:725–735. https://doi.org/10.1016/j.surfcoat.2019.06.06210.1016/j.surfcoat.2019.06.062 ↗
28. Leyland A, Matthews A (2000) On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behavior. Wear 246(1–2):1–11. https://doi.org/10.1016/S0043-1648(00)00488-910.1016/S0043-1648(00)00488-9 ↗
29. Guo J, Wang H, Meng F, Liu X, Huang F (2013) Tuning the H/E* ratio and E* of AlN coatings by copper addition. Surf Coat Technol 228:68–75. https://doi.org/10.1016/j.surfcoat.2013.04.00810.1016/j.surfcoat.2013.04.008 ↗
30. Li Z, Wang Y, Cheng X, Zeng Z et al (2018) Continuously growing ultrathick CrN coating to achieve high load-bearing capacity and good tribological property. ACS Appl Mater Interfaces 10(3):2965–2975. https://doi.org/10.1021/acsami.7b1642610.1021/acsami.7b16426 ↗
31. Xu X, Sun J, Su F, Li Z et al (2022) Microstructure and tribological performance of adaptive MoN-Ag nanocomposite coatings with various Ag contents. Wear 488–489:204170. https://doi.org/10.1016/j.wear.2021.20417010.1016/j.wear.2021.204170 ↗
32. Aouadi S, Paudel Y, Simonson W, Ge Q et al (2009) Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content. Surf Coat Technol 203(10–11):1304–1309. https://doi.org/10.1016/j.surfcoat.2008.10.04010.1016/j.surfcoat.2008.10.040 ↗
33. Abdel-Dayem HM (2007) Dynamic phenomena during reduction of α-NiMoO4 in different atmospheres: In-situ thermo-raman spectroscopy study. Ind Eng Chem Res 46(8):2466–2472. https://doi.org/10.1021/ie061346710.1021/ie0613467 ↗
34. Li B, Gao Y, Li C, Liu Z et al (2020) Effect of heat treatment on the microstructure, mechanical property and tribological property of plasma-sprayed high temperature lubricating composite coating from nanostructured powder. J Alloys Compd 816:152671. https://doi.org/10.1016/j.jallcom.2019.15267110.1016/j.jallcom.2019.152671 ↗
35. Allam IM (1991) Solid lubricants for applications at elevated temperatures. J Mater Sci. https://doi.org/10.1007/BF0240293610.1007/BF02402936 ↗