Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Greer A, Bunn A, Tronche A et al (2000) Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al-Ti-B. Acta Mater 48(11):2823–283510.1016/S1359-6454(00)00094-X ↗
2. Kang N, Zhang Y, Mansori El et al (2023) Laser powder bed fusion of a novel high strength quasicrystalline Al–Fe–Cr reinforced Al matrix composite. Adv Powder Mater 2(2):10010810.1016/j.apmate.2022.100108 ↗
3. Shi Y, Liu L, Zhang L et al (2017) Effect of squeeze casting process on microstructures and flow stress behavior of Al-17. 5Si-4Cu-0.5 Mg alloy. J Iron Steel Res Int 24(9):957–96510.1016/S1006-706X(17)30139-5 ↗
4. Gao Z, Li H, Lai Y et al (2013) Effects of minor Zr and Er on microstructure and mechanical properties of pure aluminum. Mater Sci Eng:A 580:92–9810.1016/j.msea.2013.05.035 ↗
5. Fan Z, Gao F, Wang Y et al (2022) Effect of solutes on grain refinement. Prog Mater Sci 123:100809. https://doi.org/10.1016/j.pmatsci.2021.10080910.1016/j.pmatsci.2021.100809 ↗
6. Gao J, Gu W, Zhang F et al (1974) Selective etching of Sr-modified and directionally solidified industrial Al–Si eutectic alloys for fabricating fibrous eutectic Si. Metals 2021:11
7. Shabestari S, Shahri F (2004) Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy. J Mater Sci 39:2023–203210.1023/B:JMSC.0000017764.20609.0d ↗
8. Birol Y (2009) A novel Al-Ti-B alloy for grain refining Al–Si foundry alloys. J Alloy Compd 486(1–2):219–22210.1016/j.jallcom.2009.07.064 ↗
9. Qiu D, Taylor J, Zhang M et al (2007) A mechanism for the poisoning effect of silicon on the grain refinement of Al–Si alloys. Acta Mater 55(4):1447–145610.1016/j.actamat.2006.09.046 ↗
10. Chang L, Ding Y, Guo B et al (2022) Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy. Mater Charact 184:111693. https://doi.org/10.1016/j.matchar.2021.11169310.1016/j.matchar.2021.111693 ↗
11. Lee Y, Dahle A, John D et al (1999) The effect of grain refinement and silicon content on grain formation in hypoeutectic Al–Si alloys. Mater Sci Eng, A 259(1):43–5210.1016/S0921-5093(98)00884-3 ↗
12. Liao H, Song W, Wang QG et al (2013) Effect of Sr addition on porosity formation in directionally solidified A356 alloy. Int J Cast Met Res 26:201–20810.1179/1743133613Y.0000000053 ↗
13. Zhang C, Du Y, Liu S et al (2016) Thermal conductivity of Al–Cu–Mg–Si alloys: Experimental measurement and CALPHAD modeling. Thermochim Acta 635:8–1610.1016/j.tca.2016.04.019 ↗
14. Yang C, Lee S, Lee C et al (2006) Effects of Sr and Sb modifiers on the sliding wear behavior of A357 alloy under varying pressure and speed conditions. Wear 261:1348–135810.1016/j.wear.2006.03.051 ↗
15. Day M, Hellawell A. (1968) The microstructure and crystallography of Aluminum-silicon eutectic alloys. In: Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 305(1483): 473–491.10.1098/rspa.1968.0128 ↗
16. Dahle A, Nogita K, McDonald S et al (2001) Eutectic nucleation and growth in hypoeutectic Al-Si alloys at different strontium levels. Metall and Mater Trans A 32:949–96010.1007/s11661-001-0352-y ↗
17. Afsharnaderi A, Lotfpour M, Mirzadeh H et al (2020) Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion. Mater Sci Eng, A 792:139817. https://doi.org/10.1016/j.msea.2020.13981710.1016/j.msea.2020.139817 ↗
18. Chang C, Liao H, Yi L et al (2023) Achieving ultra-high strength and ductility in Mg–9Al–1Zn–0.5 Mn alloy via selective laser melting. Adv Powder Mater 2(2):100097. https://doi.org/10.1016/j.apmate.2022.10009710.1016/j.apmate.2022.100097 ↗
19. Qi P, Li B, Wang T et al (2019) Effect of erbium on the microstructure and mechanical properties of semi-solid Al-7Si-0.4 Mg alloy. Adv Eng Mater 21:1801037. https://doi.org/10.1002/adem.20180103710.1002/adem.201801037 ↗
20. Wang T, Zhao Y, Chen Z et al (2015) Combining effects of TiB2 and La on the aging behavior of A356 alloy. Mater Sci Eng, A 644:425–43010.1016/j.msea.2015.07.076 ↗
21. Mao G, Yan H, Zhu C et al (2019) The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions of different cooling rates. J Alloy Compd 806:909–91610.1016/j.jallcom.2019.07.107 ↗
22. Giovanni MD, Kaduk JA, Srirangam P (2019) Modification of Al-Si Alloys by Ce or Ce with Sr. JOM 71(1):426–43410.1007/s11837-018-3192-6 ↗
23. Kim M (2007) Electron back scattering diffraction (EBSD) analysis of hypereutectic Al− Si alloys modified by Sr and Sc. Met Mater Int 13:103–10710.1007/BF03027559 ↗
24. Xu C, Wang F, Mudassar H et al (2017) Effect of Sc and Sr on the eutectic Si morphology and tensile properties of Al-Si-Mg alloy. J Mater Eng Perform 26(4):1605–161310.1007/s11665-017-2599-5 ↗
25. Lu S, Hellawell A (1987) The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning. Metall Trans A 18:1721–173310.1007/BF02646204 ↗
26. Nogita K, McDonald S, Dahle A (2004) Eutectic modification of Al-Si alloys with rare earth metals. Mater Trans 45(2):323–32610.2320/matertrans.45.323 ↗
27. Zhang XG, Mei FQ, Zhang HY et al (2012) Effects of Gd and Y additions on microstructure and properties of Al–Zn–Mg–Cu–Zr alloys. Mater Sci Eng, A 552:230–23510.1016/j.msea.2012.05.035 ↗
28. Wei J, Wang Q, Zhang L et al (2021) Effects of Gd addition on the microstructure and tensile properties of Mg–4Al–5RE alloy produced by three different casting methods. Acta Metall Sinica (English Lett) 34:1361–137410.1007/s40195-021-01276-4 ↗
29. Kang H, Yoon Kim W et al (2007) Effective parameter for the selection of modifying agent for Al-Si alloy. Mater Sci Eng: A 449:334–33710.1016/j.msea.2006.02.363 ↗
30. Shi Z, Wang Q, Shi Y et al (2015) Microstructure and mechanical properties of Gd-modified A356 aluminum alloys. J Rare Earths 33(9):1004–100910.1016/S1002-0721(14)60518-4 ↗
31. Liu W, Xiao W, Xu C et al (2017) Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy. Mater Sci Eng, A 693:93–10010.1016/j.msea.2017.03.097 ↗
32. Van Dalen ME, Dunand DC, Seidman DN (2011) Microstructural evolution and creep properties of precipitation-strengthened Al–0.06 Sc–0.02 Gd and Al–0.06 Sc–0.02 Yb (at. %) alloys. Acta Mater 59(13):5224–523710.1016/j.actamat.2011.04.059 ↗
33. Ceschini L, Morri A, Morri A et al (2009) Correlation between ultimate tensile strength and solidification microstructure for the sand cast A357 aluminium alloy. Mater Des 30(10):4525–453110.1016/j.matdes.2009.05.012 ↗
34. Li B, Wang H, Jie J et al (2011) Effects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5 Si–0.5 Mg alloy. Mater Des 32(3):1617–162210.1016/j.matdes.2010.08.040 ↗
35. Qiu C, Miao S, Li X et al (2017) Synergistic effect of Sr and La on the microstructure and mechanical properties of A356.2 alloy. Mater Des 114:563–57110.1016/j.matdes.2016.10.061 ↗
36. Zhang Q, Zhang C, Han W (1981) The modification of Al-Si eutectic alloys with rare-earth elements. Acta Metall Sin 17(2):130–241
37. Shamsuzzoha M, Hogan LM (1986) The crystal morphology of fibrous silicon in strontium-modified Al-Si eutectic. Philos Mag A 54(4):459–47610.1080/01418618608243605 ↗
38. Barrirero J, Engstler M, Ghafoor N et al (2014) Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy. J Alloy Compd 611(12):410–42110.1016/j.jallcom.2014.05.121 ↗
39. Liang X, Wang Y, Wang L et al (2022) The effect of solution treatment on the Si particles’ morphology evolution and the thermal conductivity and tensile properties of Sb-modified Al-8Si-0.6 Mg alloys. Metals 12(3):377. https://doi.org/10.3390/met1203037710.3390/met12030377 ↗
40. Di Giovanni MT, de Menezes JTO, Cerri E et al (2020) Influence of microstructure and porosity on the fracture toughness of Al-Si-Mg alloy. J Market Res 9(2):1286–1295
41. Kobayashi T (2000) Strength and fracture of aluminum alloys. Mater Sci Eng A 280:8–1610.1016/S0921-5093(99)00649-8 ↗
42. Sui Y, Wang Q, Liu T et al (2015) Influence of Gd content on microstructure and mechanical properties of cast Al–12Si–4Cu–2Ni–0.8 Mg alloys. J Alloys Compd 644:228–23510.1016/j.jallcom.2015.04.164 ↗
43. Chen F, Lu T, Pan Y (2020) Effects of grain refinement on tensile properties and precipitation kinetics of Al-Si-Mg alloys cast in sand molds. Metall and Mater Trans B 51:1933–194010.1007/s11663-020-01910-z ↗
44. Wagner R (1960) On the growth of germanium dendrites. Acta Metall 8:57–6010.1016/0001-6160(60)90145-0 ↗
45. Li JH, Albu M, Hofer F et al (2015) Solute adsorption and entrapment during eutectic Si growth in A-Si-based alloys. Acta Mater 83:187–20210.1016/j.actamat.2014.09.040 ↗
46. Wang Z, Zhang Q, Zhang M et al (2020) Effect of refinement and modification on microstructure, properties and eutectic silicon growth mechanism of cast A356 aluminum alloy. Rare Metal Mater Eng 49(8):2665–2673
47. Ying L, Chun C, Hong G et al (2022) Synergistic effects of Cr and Sr addition on the mechanical and corrosion properties of A3562 alloy. Mater Charact 191:1044–5803
48. M. G. Day, A. Hellawell, and P. B. Hirsch. (1968) The microstructure and crystallography of aluminum-silicon eutectic alloys. In: Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 305:473–49110.1098/rspa.1968.0128 ↗
49. Wang W, Guo F, Gai Z et al (2018) The formation of nanoparticles and their competitive interaction with twins during eutectic Si growth. Materials (Basel) 11(8):1404. https://doi.org/10.3390/ma1108140410.3390/ma11081404 ↗
50. Nogita K, Drennan J, Dahle A (2003) Evaluation of silicon twinning in hypo-eutectic Al-Si alloys. Mater Trans 44(4):625–62810.2320/matertrans.44.625 ↗
51. Barrirero J, Pauly C, Engstler M et al (2019) Eutectic modification by ternary compound cluster formation in Al-Si alloys. Sci Rep 9(1):5506. https://doi.org/10.1038/s41598-019-41919-210.1038/s41598-019-41919-2 ↗
52. Fujiwara K, Fukuda H, Usami N et al (2010) Growth mechanism of the Si⟨110⟩ faceted dendrite. Phys Rev B 81(22):224106. https://doi.org/10.1103/PhysRevB.81.22410610.1103/PhysRevB.81.224106 ↗