Tailor the antibacterial efficiency of copper alloys by oxidation: when to and when not to
Source abstract
Abstract
Abstract Copper and its relevant species, such as oxides and many alloys, have been recognised as potential antibacterial surfaces. Despite the relatively low antibacterial efficacy of cuprous oxide (Cu2O) compared to pure copper, it is still worth consideration in some scenarios. Taking copper-nickel co-sputtered thin films with two copper contents (55 and 92 at.%) as examples, this work investigated the potential of oxidation in altering the antibacterial behaviour of copper alloy surfaces. By heat treatment at 200–250 °C for 20–24 h, a layer mainly composed of Cu2O was successfully fabricated on the top of the Cu-Ni alloys. Antibacterial efficiency against Escherichia coli in 1 h was obtained by the droplet method and further compared. The coupons with 92 at.% copper became less effective after oxidation: the reduction rate declines from 97.0 to 74.3%; whereas the coupons with 55 at.% copper showed a large increase after oxidation, rising from 15.0 to 66.8%. The experiments described herein reveal a promising concept of oxidation in enhancing the less effective copper alloy surfaces for antibacterial applications. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Copper-based nanomaterials and applications · Nanoparticles: synthesis and applications · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Michels H, Moran W, Michel J (2008) Antimicrobial properties of copper alloy surfaces, with a focus on hospital-acquired infections. Int J Metalcast 2:47–5610.1007/BF03355432 ↗
2. Salgado CD, Sepkowitz KA, John JF, Cantey JR, Attaway HH, Freeman KD, Sharpe PA, Michels HT, Schmidt MG (2013) Copper surfaces reduce the rate of healthcare-acquired infections in the intensive care unit. Infect Control Hosp Epidemiol 34:479–48610.1086/670207 ↗
3. Michels HT, Keevil CW, Salgado CD, Schmidt MG (2015) From laboratory research to a clinical trial: copper alloy surfaces kill bacteria and reduce hospital-acquired infections. HERD Health Environ Res Des J 9:64–7910.1177/1937586715592650 ↗
4. Souli M, Antoniadou A, Katsarolis I, Mavrou I, Paramythiotou E, Papadomichelakis E, Drogari-Apiranthitou M, Panagea T, Giamarellou H, Petrikkos G, Armaganidis A (2017) Reduction of environmental contamination with multidrug-resistant bacteria by copper-alloy coating of surfaces in a highly endemic setting. Infect Control Hosp Epidemiol 38:765–77110.1017/ice.2017.52 ↗
5. Ibrahim Z, Petrusan AJ, Hooke P, Hinsa-Leasure SM (2018) Reduction of bacterial burden by copper alloys on high-touch athletic center surfaces. Am J Infect Control 46:197–20110.1016/j.ajic.2017.08.028 ↗
6. Różańska A, Chmielarczyk A, Romaniszyn D, Majka G, Bulanda M (2018) Antimicrobial effect of copper alloys on Acinetobacter species isolated from infections and hospital environment. Antimicrob Resist Infect Control 7:1010.1186/s13756-018-0300-x ↗
7. Dauvergne E, Lacquemant C, Adjidé C, Mullié C (2020) Validation of a worst-case scenario method adapted to the healthcare environment for testing the antibacterial effect of brass surfaces and implementation on hospital antibiotic-resistant strains. Antibiotics 9:24510.3390/antibiotics9050245 ↗
8. Macomber L, Imlay JA (2009) The iron-sulfur clusters of dehydratases are primary intracellular targets of copper toxicity. Proc Natl Acad Sci 106:8344–834910.1073/pnas.0812808106 ↗
9. Santo CE, Taudte N, Nies DH, Grass G (2008) Contribution of copper ion resistance to survival of E. coli on metallic copper surfaces. Appl Environ Microbiol 74:977–98610.1128/AEM.01938-07 ↗
10. Luo J, Hein C, Pierson J-F, Mücklich F (2020) Sodium chloride assists copper release, enhances antibacterial efficiency, and introduces atmospheric corrosion on copper surface. Surf Interfaces 20:10063010.1016/j.surfin.2020.100630 ↗
11. Davis JR (2001) Copper and copper alloys. ASM international, Ohio10.31399/asm.tb.aub.t61170457 ↗
12. Hong R, Kang TY, Michels CA, Gadura N (2012) Membrane lipid peroxidation in copper alloy-mediated contact killing of E. coli. Appl Environ Microbiol 78:1776–178410.1128/AEM.07068-11 ↗
13. Kocaman A, Keles O (2019) Antibacterial efficacy of wire arc sprayed copper coatings against various pathogens. J Therm Spray Technol 28:504–51310.1007/s11666-018-0824-x ↗
14. Kang Y, Park J, Kim D-W, Kim H, Kang Y-C (2016) Controlling the antibacterial activity of CuSn thin films by varying the contents of Sn. Appl Surf Sci 389:1012–101610.1016/j.apsusc.2016.08.041 ↗
15. Ciacotich N, Din RU, Sloth JJ, Møller P, Gram L (2018) An electroplated copper–silver alloy as antibacterial coating on stainless steel. Surf Coat Technol 345:96–10410.1016/j.surfcoat.2018.04.007 ↗
16. Villapún VM, Lukose CC, Birkett M, Dover LG, González S (2018) Tuning the antimicrobial behaviour of Cu85Zr15 thin films in “wet” and “dry” conditions through structural modifications. Surf Coat Technol 350:334–34510.1016/j.surfcoat.2018.06.094 ↗
17. Etiemble A, Der Loughian C, Apreutesei M, Langlois C, Cardinal S, Pelletier JM, Pierson JF, Steyer P (2017) Innovative Zr-Cu-Ag thin film metallic glass deposed by magnetron PVD sputtering for antibacterial applications. J Alloy Compd 707:155–16110.1016/j.jallcom.2016.12.259 ↗
18. Comby-Dassonneville S, Venot T, Borroto A, Longin E, der Loughian C, ter Ovanessian B, Leroy M-A, Pierson J-F, Steyer P (2021) ZrCuAg thin-film metallic glasses: toward biostatic durable advanced surfaces. ACS Appl Mater Interfaces 13:17062–1707410.1021/acsami.1c01127 ↗
19. Hans M, Erbe A, Mathews S, Chen Y, Solioz M, Mücklich F (2013) Role of copper oxides in contact killing of bacteria. Langmuir 29:16160–1616610.1021/la404091z ↗
20. Hassan IA, Parkin IP, Nair SP, Carmalt CJ (2014) Antimicrobial activity of copper and copper(i) oxide thin films deposited via aerosol-assisted CVD. J Mater Chem B 2:2855–286010.1039/C4TB00196F ↗
21. Luo J, Hein C, Pierson J-F, Mücklich F (2019) Early-stage corrosion, ion release, and the antibacterial effect of copper and cuprous oxide in physiological buffers: Phosphate-buffered saline vs Na-4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid. Biointerphases 14:06100410.1063/1.5123039 ↗
22. Katwal R, Kaur H, Sharma G, Naushad M, Pathania D (2015) Electrochemical synthesized copper oxide nanoparticles for enhanced photocatalytic and antimicrobial activity. J Ind Eng Chem 31:173–18410.1016/j.jiec.2015.06.021 ↗
23. Ekthammathat N, Thongtem T, Thongtem S (2013) Antimicrobial activities of CuO films deposited on Cu foils by solution chemistry. Appl Surf Sci 277:211–21710.1016/j.apsusc.2013.04.027 ↗
24. Eswar NK, Gupta R, Ramamurthy PC, Madras G (2018) Influence of copper oxide grown on various conducting substrates towards improved performance for photoelectrocatalytic bacterial inactivation. Mol Catal 451:161–16910.1016/j.mcat.2017.12.030 ↗
25. Shim G-I, Kim S-H, Eom H-W, Choi S-Y (2015) Concentration- and roughness-dependent antibacterial and antifungal activities of CuO thin films and their Cu ion cytotoxicity and elution behavior. J Ind Microbiol Biotechnol 42:735–74410.1007/s10295-015-1601-1 ↗
26. Horton DJ, Ha H, Foster LL, Bindig HJ, Scully JR (2015) Tarnishing and Cu ion release in selected copper-base alloys: implications towards antimicrobial functionality. Electrochim Acta 169:351–36610.1016/j.electacta.2015.04.001 ↗
27. Walkowicz M, Osuch P, Smyrak B, Knych T, Rudnik E, Cieniek Ł, Różańska A, Chmielarczyk A, Romaniszyn D, Bulanda M (2018) Impact of oxidation of copper and its alloys in laboratory-simulated conditions on their antimicrobial efficiency. Corros Sci 140:321–33210.1016/j.corsci.2018.05.033 ↗
28. Schindelin J, Arganda-Carreras I, Frise E, Kaynig V, Longair M, Pietzsch T, Preibisch S, Rueden C, Saalfeld S, Schmid B, Tinevez J-Y, White DJ, Hartenstein V, Eliceiri K, Tomancak P, Cardona A (2012) Fiji: an open-source platform for biological-image analysis. Nat Methods 9:1099910.1038/nmeth.2019 ↗
29. Molteni C, Abicht HK, Solioz M (2010) Killing of bacteria by copper surfaces involves dissolved copper. Appl Environ Microbiol 76:4099–410110.1128/AEM.00424-10 ↗
30. Wagner C (1952) Theoretical analysis of the diffusion processes determining the oxidation rate of alloys. J Electrochem Soc 99:36910.1149/1.2779605 ↗
31. Heinemann K, Rao DB, Douglass DL (1977) In situ oxidation studies on (001) copper-nickel alloy thin films. Oxid Met 11:321–33410.1007/BF00608015 ↗
32. Selvamani V, Zareei A, Elkashif A, Maruthamuthu MK, Chittiboyina S, Delisi D, Li Z, Cai L, Pol VG, Seleem MN, Rahimi R (2020) Hierarchical micro/mesoporous copper structure with enhanced antimicrobial property via laser surface texturing. Adv Mater Interfaces 7:190189010.1002/admi.201901890 ↗
33. Müller DW, Lößlein S, Terriac E, Brix K, Siems K, Moeller R, Kautenburger R, Mücklich F (2021) Increasing antibacterial efficiency of Cu surfaces by targeted surface functionalization via ultrashort pulsed direct laser interference patterning. Adv Mater Interfaces 8:200165610.1002/admi.202001656 ↗
34. Wallwork GR (1976) The oxidation of alloys. Rep Prog Phys 39:401–48510.1088/0034-4885/39/5/001 ↗
35. Lawless KR (1974) The oxidation of metals. Rep Prog Phys 37:231–31610.1088/0034-4885/37/2/002 ↗
36. Unutulmazsoy Y, Cancellieri C, Chiodi M, Siol S, Lin L, Jeurgens LPH (2020) In situ oxidation studies of Cu thin films: growth kinetics and oxide phase evolution. J Appl Phys 127:06510110.1063/1.5131516 ↗
37. Noyce JO, Michels H, Keevil CW (2006) Potential use of copper surfaces to reduce survival of epidemic meticillin-resistant Staphylococcus aureus in the healthcare environment. J Hosp Infect 63:289–29710.1016/j.jhin.2005.12.008 ↗
38. Hahn C, Hans M, Hein C, Mancinelli RL, Mucklich F, Wirth R, Rettberg P, Hellweg CE, Moeller R (2017) Pure and oxidized copper materials as potential antimicrobial surfaces for spaceflight activities. Astrobiology 17:1183–119110.1089/ast.2016.1620 ↗
39. Różańska A, Chmielarczyk A, Romaniszyn D, Sroka-Oleksiak A, Bulanda M, Walkowicz M, Osuch P, Knych T (2017) Antimicrobial properties of selected copper alloys on Staphylococcus aureus and E. coli in different simulations of environmental conditions: with vs without organic contamination. Int J Environ Res Public Health 14:81310.3390/ijerph14070813 ↗
40. Fowler L, Janson O, Engqvist H, Norgren S, Öhman-Mägi C (2019) Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test. Mater Sci Eng, C 97:707–71410.1016/j.msec.2018.12.050 ↗
41. Tao SC, Xu JL, Yuan L, Luo JM, Zheng YF (2020) Microstructure, mechanical properties and antibacterial properties of the microwave sintered porous Ti–3Cu alloys. J Alloys Compd 812:15214210.1016/j.jallcom.2019.152142 ↗
42. Chang T, Butina K, Herting G, Rajarao GK, Richter-Dahlfors A, Blomberg E, Wallinder IO, Leygraf C (2021) The interplay between atmospheric corrosion and antimicrobial efficiency of Cu and Cu5Zn5Al1Sn during simulated high-touch conditions. Corros Sci 185:10943310.1016/j.corsci.2021.109433 ↗
43. Kunze J, Maurice V, Klein LH, Strehblow H-H, Marcus P (2001) In situ scanning tunneling microscopy study of the anodic oxidation of Cu(111) in 0.1 M NaOH. J Phys Chem B 105:4263–426910.1021/jp004012i ↗
44. Villapún VM, Qu B, Lund PA, Wei W, Dover LG, Thompson JR, Adesina JO, Hoerdemann C, Cox S, González S (2020) Optimizing the antimicrobial performance of metallic glass composites through surface texturing. Mater Today Commun 23:10107410.1016/j.mtcomm.2020.101074 ↗
45. Müller DW, Holtsch A, Lößlein S, Pauly C, Spengler C, Grandthyll S, Jacobs K, Mücklich F, Müller F (2020) In-depth investigation of copper surface chemistry modification by ultrashort pulsed direct laser interference patterning. Langmuir 36:13415–1342510.1021/acs.langmuir.0c01625 ↗
46. McDonald M, Wesgate R, Rubiano M, Holah J, Denyer SP, Jermann C, Maillard JY (2020) Impact of a dry inoculum deposition on the efficacy of copper-based antimicrobial surfaces. J Hosp Infect 106:465–47210.1016/j.jhin.2020.08.013 ↗
47. Chang T, Sepati M, Herting G, Leygraf C, Rajarao GK, Butina K, Richter-Dahlfors A, Blomberg E, Wallinder IO (2021) A novel methodology to study antimicrobial properties of high-touch surfaces used for indoor hygiene applications—a study on Cu metal. PLoS ONE 16:e024708110.1371/journal.pone.0247081 ↗
48. Bryce EA, Velapatino B, Khorami HA, Donnelly-Pierce T, Wong T, Dixon R, Asselin E (2020) In vitro evaluation of antimicrobial efficacy and durability of three copper surfaces used in healthcare. Biointerphases 15:01100510.1116/1.5134676 ↗
49. Luo J, Hein C, Pierson J-F, Mücklich F (2019) Localised corrosion attacks and oxide growth on copper in phosphate-buffered saline. Mater Charact 158:10998510.1016/j.matchar.2019.109985 ↗
50. Palmer D (2011) Solubility measurements of crystalline Cu2O in aqueous solution as a function of temperature and pH. J Solut Chem 40:1067–109310.1007/s10953-011-9699-x ↗
51. Steinhauer K, Meyer S, Pfannebecker J, Teckemeyer K, Ockenfeld K, Weber K, Becker B (2018) Antimicrobial efficacy and compatibility of solid copper alloys with chemical disinfectants. PLoS ONE 13:e020074810.1371/journal.pone.0200748 ↗
52. Mehtar S, Wiid I, Todorov SD (2008) The antimicrobial activity of copper and copper alloys against nosocomial pathogens and Mycobacterium tuberculosis isolated from healthcare facilities in the Western Cape: an in-vitro study. J Hosp Infect 68:45–5110.1016/j.jhin.2007.10.009 ↗
53. Noyce JO, Michels H, Keevil CW (2007) Inactivation of influenza a virus on copper versus stainless steel surfaces. Appl Environ Microbiol 73:2748–275010.1128/AEM.01139-06 ↗
54. Warnes SL, Keevil CW (2013) Inactivation of norovirus on dry copper alloy surfaces. PLoS ONE 8:e7501710.1371/journal.pone.0075017 ↗
55. van Doremalen N, Bushmaker T, Morris DH, Holbrook MG, Gamble A, Williamson BN, Tamin A, Harcourt JL, Thornburg NJ, Gerber SI, Lloyd-Smith JO, de Wit E, Munster VJ (2020) Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-1. N Engl J Med 382:1564–156710.1056/NEJMc2004973 ↗
56. Lucas MDI, Botef I, Reid RG, van Vuuren SF (2020) Laboratory-based study of novel antimicrobial cold spray coatings to combat surface microbial contamination. Infect Control Hosp Epidemiol 41:1378–138310.1017/ice.2020.335 ↗