DataVXJournal of Materials SciencePaper
journal article·2024-04

Wear resistance of molybdenum disulfide-based coatings on titanium alloys: a review

Mohan Li, Xinfang Zhang, Mingmei Cao, Zheng Zhou, Jinsong Rao, Shuang Yi, Yuxin Zhang, Jiawei Fu, Longmiao Chen, Songlin Ding

Journal of Materials Science· Volume 59· Issue 16
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloys

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Zhang LC, Chen LY, Wang L (2020) Surface modification of titanium and titanium alloys: technologies, developments, and future interests. Adv Eng Mater. https://doi.org/10.1002/adem.20190125810.1002/adem.201901258 ↗
2. Yi S, Li JJ, Zhu JH, Wang XZ, Mo J, Ding SL (2020) Investigation of machining Ti-6Al-4V with graphene oxide nanofluids: tool wear, cutting forces and cutting vibration. J Manuf Process 49:35–49. https://doi.org/10.1016/j.jmapro.2019.09.03810.1016/j.jmapro.2019.09.038 ↗
3. Aliofkhazraei M, Gharabagh RS, Teimouri M, Ahmadzadeh M, Darband GB, Hasannejad H (2016) Ceria embedded nanocomposite coating fabricated by plasma electrolytic oxidation on titanium. J Alloy Compd 685:376–383. https://doi.org/10.1016/j.jallcom.2016.05.31510.1016/j.jallcom.2016.05.315 ↗
4. Zhang D, Cui XF, Jin G, Song QL, Yuan CF, Fang YC et al (2019) Microstructure and tribological performance of laser-cladded Ni60+h-BN coatings on Ti–6Al–4V alloy at high temperature. Tribol Trans 62(5):779–788. https://doi.org/10.1080/10402004.2019.161791610.1080/10402004.2019.1617916 ↗
5. Yi S, Li GX, Ding SL, Mo J (2017) Performance and mechanisms of graphene oxide suspended cutting fluid in the drilling of titanium alloy Ti–6Al–4V. J Manuf Process 29:182–193. https://doi.org/10.1016/j.jmapro.2017.07.02710.1016/j.jmapro.2017.07.027 ↗
6. Liu YA, Ding Y, Yang LJ, Sun RL, Zhang TG, Yang XJ (2021) Research and progress of laser cladding on engineering alloys: a review. J Manuf Process 66:341–363. https://doi.org/10.1016/j.jmapro.2021.03.06110.1016/j.jmapro.2021.03.061 ↗
7. Kumar S, Kumar V, Singh AK (2020) Influence of lubricants on the performance of journal bearings—a review. Tribol-Mater Surf Interfaces 14(2):67–78. https://doi.org/10.1080/17515831.2020.171211210.1080/17515831.2020.1712112 ↗
8. Scharf TW, Prasad SV (2012) Solid lubricants: a review. J Mater Sci 48(2):511–531. https://doi.org/10.1007/s10853-012-7038-210.1007/s10853-012-7038-2 ↗
9. Li GX, Yi S, Li N, Pan WC, Wen CE, Ding SL (2019) Quantitative analysis of cooling and lubricating effects of graphene oxide nanofluids in machining titanium alloy Ti6Al4V. J Mater Process Technol 271:584–598. https://doi.org/10.1016/j.jmatprotec.2019.04.03510.1016/j.jmatprotec.2019.04.035 ↗
10. Dong SJ, Cheng WL, Yao JB (2023) Influence of reciprocating friction on friction and wear characteristics of MoS2 films. Results Eng. https://doi.org/10.1016/j.rineng.2023.10107310.1016/j.rineng.2023.101073 ↗
11. Qiao L, Wang P, Chai LQ, Zhang XL, Liu WM (2015) Influence of the incident flux angles on the structures and properties of magnetron sputtered MoS2 films. J Phys D-Appl Phys. https://doi.org/10.1088/0022-3727/48/17/17530410.1088/0022-3727/48/17/175304 ↗
12. Yin GL, Huang PH, Yu Z, He DN, Tu JP (2006) Microstructure, chemical and tribological investigations of MoxW1-xSy co-sputtered composite films. Tribol Lett 22(1):37–43. https://doi.org/10.1007/s11249-006-9070-310.1007/s11249-006-9070-3 ↗
13. Sreekumar R, Nair AS, Sreejakumari SS (2022) Recent trends and developments in two-dimensional materials based electrodeposited nickel nanocomposite coatings. FlatChem. https://doi.org/10.1016/j.flatc.2022.10043410.1016/j.flatc.2022.100434 ↗
14. Kalantar-Zadeh K, Ou JZ (2016) Biosensors based on two-dimensional MoS2. Acs Sensors 1(1):5–16. https://doi.org/10.1021/acssensors.5b0014210.1021/acssensors.5b00142 ↗
15. Bulbul F, Efeoglu I (2010) MoS2–Ti composite films having (002) orientation and low Ti content. Crystallogr Rep 55(7):1177–1182. https://doi.org/10.1134/s106377451007012610.1134/s1063774510070126 ↗
16. Sarkar M, Mandal N (2022) Solid lubricant materials for high temperature application: a review. Mater Today: Proc 66:3762–3768. https://doi.org/10.1016/j.matpr.2022.06.03010.1016/j.matpr.2022.06.030 ↗
17. Furlan KP, De Mello JDB, Klein AN (2018) Self-lubricating composites containing MoS2: a review. Tribol Int 120:280–298. https://doi.org/10.1016/j.triboint.2017.12.03310.1016/j.triboint.2017.12.033 ↗
18. Wang DY, Chang CL, Chen ZY, Ho WY (1999) Microstructural and tribological characterization of MoS2–Ti composite solid lubricating films. Surf Coat Technol 120:629–635. https://doi.org/10.1016/s0257-8972(99)00431-410.1016/s0257-8972(99)00431-4 ↗
19. Qin XP, Ke PL, Wang AY, Kim KH (2013) Microstructure, mechanical and tribological behaviors of MoS2–Ti composite coatings deposited by a hybrid HIPIMS method. Surf Coat Technol 228:275–281. https://doi.org/10.1016/j.surfcoat.2013.04.04010.1016/j.surfcoat.2013.04.040 ↗
20. Zhou H, Zheng J, Wen QP, Wan ZH, Sang RP (2011) The effect of Ti content on the structural and mechanical properties of MoS2–Ti composite coatings deposited by unbalanced magnetron sputtering system. Phys Procedia 18:234–239. https://doi.org/10.1016/j.phpro.2011.06.08710.1016/j.phpro.2011.06.087 ↗
21. Barati-Darband GH, Aliofkhazraei M, Hamghalam P, Valizade N (2017) Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications. J Magn Alloys 5(1):74–132. https://doi.org/10.1016/j.jma.2017.02.00410.1016/j.jma.2017.02.004 ↗
22. Zhang XR, Pei XQ, Wang QH (2008) Tribological properties of MoS2 and carbon fiber reinforced polyimide composites. J Mater Sci 43(13):4567–4572. https://doi.org/10.1007/s10853-008-2699-610.1007/s10853-008-2699-6 ↗
23. Yang XJ, Lin SX, Zhao J, Tang ZQ (2022) Microstructures, composition and tribological behavior of TiCrN/MoS2–TiCr coatings deposited by magnetron sputtering. Coatings. https://doi.org/10.3390/coatings1212184410.3390/coatings12121844 ↗
24. Simmonds MC, Savan A, Pflüger E, Van-Swygenhoven H (2000) Mechanical and tribological performance of MoS2 co-sputtered composites. Surf Coat Technol 126(1):15–24. https://doi.org/10.1016/S0257-8972(00)00521-110.1016/S0257-8972(00)00521-1 ↗
25. Liu C, Yin YG, Tong BH, Zhang GT (2021) Tribological properties of MoS2 powder-lubricated interface. Ind Lubr Tribol 73(6):839–845. https://doi.org/10.1108/ilt-04-2020-015010.1108/ilt-04-2020-0150 ↗
26. Chen YJ, Li HC, Su FH, Ma GZ, Li Q, Sun JF et al (2023) Tribological behavior of MoS2/a-C: Si composite films in high-temperature air and vacuum environments. Tribol Int 189:108988. https://doi.org/10.1016/j.triboint.2023.10898810.1016/j.triboint.2023.108988 ↗
27. Shi XR, He PH, Sun SQ, Chen J, Beake B, Liskiewicz TW et al (2022) Tailoring the corrosion and tribological performance of Ti-modified MoS2-based films in simulated seawater. J Market Res 21:576–589. https://doi.org/10.1016/j.jmrt.2022.09.06110.1016/j.jmrt.2022.09.061 ↗
28. Ren SM, Shang KD, Cui MJ, Wang LP, Pu JB, Yi PY (2019) Structural design of MoS2-based coatings toward high humidity and wide temperature. J Mater Sci 54(18):11889–11902. https://doi.org/10.1007/s10853-019-03754-810.1007/s10853-019-03754-8 ↗
29. Hu HJ, He Y, Wang QH, Tao LM (2023) Research on tribological behaviour and interfacial characteristic of polyimide-MoS2 composite under cryogenic-vacuum environment. Tribol Int 189:108967. https://doi.org/10.1016/j.triboint.2023.10896710.1016/j.triboint.2023.108967 ↗
30. Chen YJ, Sun JF, Liu Y, Li Q, Xiao S, Su FH (2023) Microstructure, mechanical and high-temperature tribological properties of MoS2–Cr–Ag composite films. Surf Coat Technol 452:129135. https://doi.org/10.1016/j.surfcoat.2022.12913510.1016/j.surfcoat.2022.129135 ↗
31. Sidharthan S, Raajavignesh G, Nandeeshwaran R, Radhika N, Jojith R, Jeyaprakash N (2023) Mechanical property analysis and tribological response optimization of SiC and MoS2 reinforced hybrid aluminum functionally graded composite through Taguchi’s DOE. J Manuf Process 102:965–984. https://doi.org/10.1016/j.jmapro.2023.08.01310.1016/j.jmapro.2023.08.013 ↗
32. Lu XL, Yan MM, Yan Z, Chen WY, Sui XD, Hao JY et al (2021) Exploring the atmospheric tribological properties of MoS2-(Cr, Nb, Ti, Al, V) composite coatings by high throughput preparation method. Tribol Int. https://doi.org/10.1016/j.triboint.2020.10684410.1016/j.triboint.2020.106844 ↗
33. Feng XG, Zhou H, Zheng YG, Zhang KF, Zhang YS (2021) Tribological behavior and wear mechanism of Ti/MoS2 films deposited on plasma nitrided CF170 steel sliding against different mating materials. Vacuum. https://doi.org/10.1016/j.vacuum.2021.11062310.1016/j.vacuum.2021.110623 ↗
34. Li L, Lu ZX, Pu JB, Wang HX, Li Q, Chen SB et al (2020) The superlattice structure and self-adaptive performance of C–Ti/MoS2 composite coatings. Ceram Int 46(5):5733–5744. https://doi.org/10.1016/j.ceramint.2019.11.02210.1016/j.ceramint.2019.11.022 ↗
35. Hudec T, Mikula M, Satrapinskyy L, Roch T, Truchlý M, Švec P et al (2019) Structure, mechanical and tribological properties of Mo–S–N solid lubricant coatings. Appl Surf Sci 486:1–14. https://doi.org/10.1016/j.apsusc.2019.03.29410.1016/j.apsusc.2019.03.294 ↗
36. Gu L, Ke PL, Zou YS, Li XW, Wang AY (2015) Amorphous self-lubricant MoS2–C sputtered coating with high hardness. Appl Surf Sci 331:66–71. https://doi.org/10.1016/j.apsusc.2015.01.05710.1016/j.apsusc.2015.01.057 ↗
37. Vieira LE, Goncalves AL, Arraya NIR, Neto JBR, Dias A, Klein AN (2021) Characterization of sintered bronze-MoS2 composite with solid lubrication effect. J Tribol-Trans Asme. https://doi.org/10.1115/1.404866210.1115/1.4048662 ↗
38. Feng XG, Zhou H, Zheng YG, Zhang KF, Zhang YS (2021) Tribological behavior and wear mechanism of Ti/MoS2 films deposited on plasma nitrided CF170 steel sliding against different mating materials. Vacuum 194:110623. https://doi.org/10.1016/j.vacuum.2021.11062310.1016/j.vacuum.2021.110623 ↗
39. He JQ, Sun JL, Meng YA, Yang FL, Tang HJ (2021) MoS2-Al2O3 nanofluid-induced microstructure evolution and corrosion resistance enhancement of hot-rolled steel surface. J Mater Sci 56(31):17805–17823. https://doi.org/10.1007/s10853-021-06415-x10.1007/s10853-021-06415-x ↗
40. Duan ZW, Zhao XY, Qiao L, Zhao YB, Fu EG, Wang P et al (2019) Structural evolution and wear resistance of MoS2-Based lubricant films irradiated by heavy ions. Surf Coat Technol 378:125077. https://doi.org/10.1016/j.surfcoat.2019.12507710.1016/j.surfcoat.2019.125077 ↗
41. Colas G, Saulot A, Regis E, Berthier Y (2015) Investigation of crystalline and amorphous MoS2 based coatings: towards developing new coatings for space applications. Wear 330–331:448–460. https://doi.org/10.1016/j.wear.2015.01.01110.1016/j.wear.2015.01.011 ↗
42. Li H, Li X, Zhang GA, Wang LP, Wu GZ (2017) Exploring the tribophysics and tribochemistry of MoS2 by sliding MoS2/Ti composite coating under different humidity. Tribol Lett. https://doi.org/10.1007/s11249-017-0824-x10.1007/s11249-017-0824-x ↗
43. Kim SK, Ahn YH, Kim KH (2003) MoS2–Ti composite coatings on tool steel by d.c. magnetron sputtering. Surf Coat Technol 169:428–432. https://doi.org/10.1016/s0257-8972(03)00181-610.1016/s0257-8972(03)00181-6 ↗
44. Wang X, Xing YM, Ma SL, Zhang XL, Xu KW, Teer DG (2007) Microstructure and mechanical properties of MoS2/titanium composite coatings with different titanium content. Surf Coat Technol 201(9–11):5290–5293. https://doi.org/10.1016/j.surfcoat.2006.07.12410.1016/j.surfcoat.2006.07.124 ↗
45. Feng XG, Wang R, Wei G, Zheng YG, Hu HJ, Yang LMC et al (2022) Effect of a micro-textured surface with deposited MoS2–Ti film on long-term wear performance in vacuum. Surf Coat Technol 445:128722. https://doi.org/10.1016/j.surfcoat.2022.12872210.1016/j.surfcoat.2022.128722 ↗
46. Polcar T, Gustavsson F, Thersleff T, Jacobson S, Cavaleiro A (2012) Complex frictional analysis of self-lubricant W-S-C/Cr coating. Faraday Discuss 156:383–401. https://doi.org/10.1039/c2fd00003b10.1039/c2fd00003b ↗
47. Hemadri K, Ajith Arul Daniel S, Kukanur V, Vijayananth S, Kumar R (2022) Investigation on mechanical characterization of Al/Mos2/WC hybrid composite. Mater Today: Proc 69:995–999. https://doi.org/10.1016/j.matpr.2022.08.01410.1016/j.matpr.2022.08.014 ↗
48. Ren SM, Cao WT, Cui MJ, Wang HX (2023) Environmentally adaptive lubrication enabled by gradient structure design of TiN-MoS2/Ti. Surf Coat Technol 458:129317. https://doi.org/10.1016/j.surfcoat.2023.12931710.1016/j.surfcoat.2023.129317 ↗
49. Xu J, Liu WJ, Zhong ML (2006) Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding. Surf Coat Technol 200(14–15):4227–4232. https://doi.org/10.1016/j.surfcoat.2005.01.03610.1016/j.surfcoat.2005.01.036 ↗
50. Yi J, Yang MM, Luo XD, Rosenkranz A, Wang B, Song H et al (2021) Unprecedented tribological performance of binary Sb/Ag-doped MoS2 coatings fabricated with chemical vapor deposition. Appl Nanosci 11(3):841–847. https://doi.org/10.1007/s13204-020-01638-x10.1007/s13204-020-01638-x ↗
51. Lu ZX, Zhang CZ, Zeng C, Ren SM, Pu JB (2021) A novel design by constructing MoS2/WS2 multilayer film doped with tantalum toward superior friction performance in multiple environment. J Mater Sci 56(31):17615–17631. https://doi.org/10.1007/s10853-021-06217-110.1007/s10853-021-06217-1 ↗
52. Roostaei M, Tabrizi AT, Aghajani H (2024) Predicting the wear rate of Alumina/MoS2 nanocomposite coating by development of a relation between lancaster coefficient & surface parameters. Tribol Int. https://doi.org/10.1016/j.triboint.2023.10912910.1016/j.triboint.2023.109129 ↗
53. Roostaei M, Aghajani H, Abbasi M, Abasht B (2021) Formation of Al2O3/MoS2 nanocomposite coatings by the use of electro spark deposition and oxidation. Ceram Int 47(8):11644–11653. https://doi.org/10.1016/j.ceramint.2020.12.29610.1016/j.ceramint.2020.12.296 ↗
54. Tabrizi AT, Aghajani H, Saghafian H, Laleh FF (2021) Correction of Archard equation for wear behavior of modified pure titanium. Tribol Int. https://doi.org/10.1016/j.triboint.2020.10677210.1016/j.triboint.2020.106772 ↗
55. You ZS, Fu HL, Qu SD, Bao WK, Lu L (2020) Revisiting anisotropy in the tensile and fracture behavior of cold-rolled 316L stainless steel with heterogeneous nano-lamellar structures. Nano Mater Sci 2(1):72–79. https://doi.org/10.1016/j.nanoms.2020.03.00110.1016/j.nanoms.2020.03.001 ↗
56. Kong N, Wei BY, Li DS, Zhuang Y, Sun GP, Wang B (2020) A study on the tribological property of MoS(2)/Ti-MoS(2)/Si multilayer nanocomposite coating deposited by magnetron sputtering. RSC Adv 10(16):9633–9642. https://doi.org/10.1039/d0ra01074j10.1039/d0ra01074j ↗
57. Simmonds MC, Savan A, Van Swygenhoven H, Pflüger E, Mikhailov S (1998) Structural, morphological, chemical and tribological investigations of sputter deposited MoSx/metal multilayer coatings. Surf Coat Technol 108(1–3):340–344. https://doi.org/10.1016/S0257-8972(98)00567-210.1016/S0257-8972(98)00567-2 ↗
58. Shang KD, Zheng SX, Ren SM, Pu JB, He DQ, Liu S (2018) Improving the tribological and corrosive properties of MoS2-based coatings by dual-doping and multilayer construction. Appl Surf Sci 437:233–244. https://doi.org/10.1016/j.apsusc.2017.12.16710.1016/j.apsusc.2017.12.167 ↗
59. Zhang P, Fang YH, Dai S, Fu YB, Zhang MX, Huang M et al (2016) Preparation and characterization of MoS2–TiL/MoS2–TiH nano multilayer coating with excellent wear properties. Mater Lett 173:35–38. https://doi.org/10.1016/j.matlet.2016.02.14510.1016/j.matlet.2016.02.145 ↗
60. Banerji A, Bhowmick S, Alpas AT (2017) Role of temperature on tribological behaviour of Ti containing MoS2 coating against aluminum alloys. Surf Coat Technol 314:2–12. https://doi.org/10.1016/j.surfcoat.2016.09.04410.1016/j.surfcoat.2016.09.044 ↗
61. Zhou L, Ma GZ, Zhao HC, Mou HL, Xu JF, Wang WZ et al (2024) Research status and prospect of extreme high-speed laser cladding technology. Opt Laser Technol 168:109800. https://doi.org/10.1016/j.optlastec.2023.10980010.1016/j.optlastec.2023.109800 ↗
62. Li SJ, Zhao XQ, An YL, Liu DD, Zhou HD, Chen JM (2018) YSZ/MoS2 self-lubricating coating fabricated by thermal spraying and hydrothermal reaction. Ceram Int 44(15):17864–17872. https://doi.org/10.1016/j.ceramint.2018.06.25810.1016/j.ceramint.2018.06.258 ↗
63. Mishra A, Gupta P, Thiruvengadam V, Singh BB, Bedanta S (2023) Spin pumping and inverse spin Hall effect in magnetron-sputtered large area MoS2/Co40Fe40B20 bilayers. J Alloy Compd 970:172076. https://doi.org/10.1016/j.jallcom.2023.17207610.1016/j.jallcom.2023.172076 ↗
64. Chen XW, Li ML, Zhang DF, Cai LP, Ren P, Hu J et al (2022) Corrosion resistance of MoS2-modified titanium alloy micro-arc oxidation coating. Surf Coat Technol 433:128127. https://doi.org/10.1016/j.surfcoat.2022.12812710.1016/j.surfcoat.2022.128127 ↗
65. Joseph S, Mohan J, Lakshmy S, Thomas S, Chakraborty B, Thomas S et al (2023) A review of the synthesis, properties, and applications of 2D transition metal dichalcogenides and their heterostructures. Mater Chem Phys 297:127332. https://doi.org/10.1016/j.matchemphys.2023.12733210.1016/j.matchemphys.2023.127332 ↗
66. Barshilia HC, Ananth A, Khan J, Srinivas G (2012) Ar + H2 plasma etching for improved adhesion of PVD coatings on steel substrates. Vacuum 86(8):1165–1173. https://doi.org/10.1016/j.vacuum.2011.10.02810.1016/j.vacuum.2011.10.028 ↗
67. Kumar A, Singh H, Kant R (2022) Influence of substrate roughness and ceramic content on deposition characteristics of cold-sprayed Ti/TiO2 deposits. Met Mater Int 29(6):1669–1683. https://doi.org/10.1007/s12540-022-01323-410.1007/s12540-022-01323-4 ↗
68. Yan SC, Chen Y, Xue YH, Zhang HT, Xin ZC (2023) Enhanced extreme pressure lubrication performance and load carrying capability of gallium-based liquid metal reinforced with MoSe2 and WSe2 nanoparticles. Tribol Int. https://doi.org/10.1016/j.triboint.2023.10841410.1016/j.triboint.2023.108414 ↗
69. Zhu LD, Xue PS, Lan Q, Meng GR, Ren Y, Yang ZC et al (2021) Recent research and development status of laser cladding: a review. Opt Laser Technol 138:106915. https://doi.org/10.1016/j.optlastec.2021.10691510.1016/j.optlastec.2021.106915 ↗
70. Ouyang CY, Wang R, Zhao CJ, Wei RZ, Li H, Deng R et al (2023) Multi-layer laser cladding analysis and high-temperature oxidative wear behavior of cast iron with a low expansion coefficient. Surf Coat Technol 474:130079. https://doi.org/10.1016/j.surfcoat.2023.13007910.1016/j.surfcoat.2023.130079 ↗
71. Devojno OG, Feldshtein E, Kardapolava MA, Lutsko NI (2018) On the formation features, microstructure and microhardness of single laser tracks formed by laser cladding of a NiCrBSi self-fluxing alloy. Opt Lasers Eng 106:32–38. https://doi.org/10.1016/j.optlaseng.2018.02.00410.1016/j.optlaseng.2018.02.004 ↗
72. Muvvala G, Karmakar DP, Nath AK (2017) Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy. Opt Lasers Eng 88:139–152. https://doi.org/10.1016/j.optlaseng.2016.08.00510.1016/j.optlaseng.2016.08.005 ↗
73. Hofman JT, De-Lange DF, Pathiraj B, Meijer J (2011) FEM modeling and experimental verification for dilution control in laser cladding. J Mater Process Technol 211(2):187–196. https://doi.org/10.1016/j.jmatprotec.2010.09.00710.1016/j.jmatprotec.2010.09.007 ↗
74. Hung CF, Lin JM (2004) Solidification model of laser cladding with wire feeding technique. J Laser Appl 16(3):140–146. https://doi.org/10.2351/1.177116710.2351/1.1771167 ↗
75. Zhao Y, Yu TB, Sun JY, Jiang SX (2020) Microstructure and properties of laser cladded B4C/TiC/Ni-based composite coating. Int J Refract Metal Hard Mater 86:105112. https://doi.org/10.1016/j.ijrmhm.2019.10511210.1016/j.ijrmhm.2019.105112 ↗
76. Zhang YY, Hu YN, Fang W, Li C, Wen YT (2023) Investigation of temperature field for the in-situ fabrication of particle-reinforced alumina ceramics coating via laser induction. Appl Therm Eng 228:120446. https://doi.org/10.1016/j.applthermaleng.2023.12044610.1016/j.applthermaleng.2023.120446 ↗
77. Arif ZU, Khalid MY, Rehman EU, Ullah S, Atif M, Tariq A (2021) A review on laser cladding of high-entropy alloys, their recent trends and potential applications. J Manuf Process 68:225–273. https://doi.org/10.1016/j.jmapro.2021.06.04110.1016/j.jmapro.2021.06.041 ↗
78. Siddiqui AA, Dubey AK (2021) Recent trends in laser cladding and surface alloying. Opt Laser Technol 134:106619. https://doi.org/10.1016/j.optlastec.2020.10661910.1016/j.optlastec.2020.106619 ↗
79. Weng F, Chen CZ, Yu HJ (2014) Research status of laser cladding on titanium and its alloys: a review. Mater Des 58:412–425. https://doi.org/10.1016/j.matdes.2014.01.07710.1016/j.matdes.2014.01.077 ↗
80. ShaoLF GY, Kong DJ (2022) Effect of MoS2 mass fraction on microstructure and tribological characteristics of laser cladded Cu-10Al coating. Surfaces Interfaces 28:101599. https://doi.org/10.1016/j.surfin.2021.10159910.1016/j.surfin.2021.101599 ↗
81. Giroto G, Gargarella P, Riva R, Kiminami CS, De-Carvalho MF, Afonso CRM (2017) Laser cladding of Fe-based metallic glass/MoS2 self-lubricating composites: effect of power and scanning speed. Mater Res-IBERO-Am J Mater 20:836–841. https://doi.org/10.1590/1980-5373-mr-2017-009410.1590/1980-5373-mr-2017-0094 ↗
82. Yang RJ, Liu ZD, Wang YT, Yang G, Li HC (2013) Synthesis and characterization of MoS2/Ti composite coatings on Ti6Al4V prepared by laser cladding. AIP Adv 3(2):022106. https://doi.org/10.1063/1.479065210.1063/1.4790652 ↗
83. Torres H, Vuchkov T, Ripoll MR, Prakash B (2018) Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications. Tribol Int 126:153–165. https://doi.org/10.1016/j.triboint.2018.05.01510.1016/j.triboint.2018.05.015 ↗
84. Bach FW, Möhwald K, Drössler B, Engl L (2005) Technology and potential of wear resistant thermal spray coatings. Materialwiss Werkstofftech 36(8):353–359. https://doi.org/10.1002/mawe.20050089210.1002/mawe.200500892 ↗
85. Sun JL, Liu CX, Venturi F, Romero AR, Hussain T (2023) Dry sliding wear behaviour of suspension HVOF thermal sprayed Al2O3-MoS2 and Al2O3-BN nanotube coatings. J Alloy Compd 966:171582. https://doi.org/10.1016/j.jallcom.2023.17158210.1016/j.jallcom.2023.171582 ↗
86. Gautam RKS, Rao US, Tyagi R (2019) Influence of load on friction and wear behavior of Ni-based self-lubricating coatings deposited by atmospheric plasma spray. J Mater Eng Perform 28(12):7398–7406. https://doi.org/10.1007/s11665-019-04510-410.1007/s11665-019-04510-4 ↗
87. Gautam RKS, Rao US, Tyagi R (2019) High temperature tribological properties of Ni-based self-lubricating coatings deposited by atmospheric plasma spray. Surf Coat Technol 372:390–398. https://doi.org/10.1016/j.surfcoat.2019.05.02410.1016/j.surfcoat.2019.05.024 ↗
88. Workie AB, Ningsih HS, Shih SJ (2023) An comprehensive review on the spray pyrolysis technique: historical context, operational factors, classifications, and product applications. J Anal Appl Pyrol 170:105915. https://doi.org/10.1016/j.jaap.2023.10591510.1016/j.jaap.2023.105915 ↗
89. Song RW, Chen S, Liu ZW, Huo CQ, Chen Q (2023) Effect of W-doping on the structure and properties of DLC films prepared by combining physical and chemical vapor deposition. Diam Relat Mater 132:109687. https://doi.org/10.1016/j.diamond.2023.10968710.1016/j.diamond.2023.109687 ↗
90. Vogt P, De-Padova P, Quaresima C, Avila J, Frantzeskakis E, Asensio MC et al (2012) Silicene: compelling experimental evidence for graphenelike two-dimensional silicon. Phys Rev Lett 108(15):155501. https://doi.org/10.1103/PhysRevLett.108.15550110.1103/PhysRevLett.108.155501 ↗
91. Yu X, Wang CB, Liu Y, Yu DY, Xing TY (2006) Recent developments in magnetron sputtering. Plasma Sci Technol 8(3):337–343. https://doi.org/10.1088/1009-0630/8/3/2010.1088/1009-0630/8/3/20 ↗
92. Panjan M, Anders A (2017) Plasma potential of a moving ionization zone in DC magnetron sputtering. J Appl Phys 121(6):063302. https://doi.org/10.1063/1.497494410.1063/1.4974944 ↗
93. Zhang C, Yang BQ, Wang J, Wang HF, Liu G, Zhang BS et al (2019) Microstructure and friction behavior of LaF3 doped Ti-MoS2 composite thin films deposited by unbalanced magnetron sputtering. Surf Coat Technol 359:334–341. https://doi.org/10.1016/j.surfcoat.2018.12.04110.1016/j.surfcoat.2018.12.041 ↗
94. Gudmundsson JT (2020) Physics and technology of magnetron sputtering discharges. Plasma Sour Sci Technol 29(11):113001. https://doi.org/10.1088/1361-6595/abb7bd10.1088/1361-6595/abb7bd ↗
95. Gudmundsson JT, Brenning N, Lundin D, Helmersson U (2012) High power impulse magnetron sputtering discharge. J Vac Sci Technol, A 30(3):030801. https://doi.org/10.1116/1.369183210.1116/1.3691832 ↗
96. Arslan E, Totik Y, Efeoglu I (2012) Comparison of structure and tribological properties of MoS2–Ti films deposited by biased-dc and pulsed-dc. Prog Org Coat 74(4):772–776. https://doi.org/10.1016/j.porgcoat.2011.10.02110.1016/j.porgcoat.2011.10.021 ↗
97. Maurya DK, Sardarinejad A, Alameh K (2014) Recent Developments in RF magnetron sputtered thin films for pH sensing applications—an overview. Coatings 4(4):756–771. https://doi.org/10.3390/coatings404075610.3390/coatings4040756 ↗
98. Kelly PJ, West GT, Ratova M, Fisher L, Ostovarpour S, Verran J (2014) Structural formation and photocatalytic activity of magnetron sputtered titania and doped–titania coatings. Molecules 19(10):16327–16348. https://doi.org/10.3390/molecules19101632710.3390/molecules191016327 ↗
99. Mehr AK, Mehr AK (2021) Grid-assisted co-sputtering method: background, advancement, and prospect. Plasma Chem Plasma Process 41(3):713–744. https://doi.org/10.1007/s11090-021-10165-810.1007/s11090-021-10165-8 ↗
100. Greczynski G, Lu J, Jensen J, Bolz S, Koelker W, Schiffers C et al (2014) A review of metal-ion-flux-controlled growth of metastable TiAlN by HIPIMS/DCMS co-sputtering. Surf Coat Technol 257:15–25. https://doi.org/10.1016/j.surfcoat.2014.01.05510.1016/j.surfcoat.2014.01.055 ↗