Surface deformation of single crystalline copper on different nano-scratching paths
Source abstract
Abstract
Anisotropic deformation behavior of single crystalline material under scratching has a significant effect on machining precision in nano-mechanical machining. In the present work, a crystal plasticity finite element model simulating the scratching process is developed, and the established model is validated by comparison with experimental results. (001)-, (101)- and (111)-oriented coppers are selected to investigate the deformation behavior including scratching depth, surface topography and subsurface deformation affected by scratching path. Further, the deformation mechanisms of (001)-, (101)- and (111)-oriented coppers are analyzed to be caused by deformation of slip systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Daiguji H, Yang PD, Szeri AJ, Majumdar A (2004) Electrochemomechanical energy conversion in nanofluidic channels. Nano Lett 4:2315. https://doi.org/10.1021/nl048994510.1021/nl0489945 ↗
2. Malekian M, Park SS, Strathearn D, Mostofa MG, Jun MBG (2010) Atomic force microscope probe-based nanometric scribing. J Micromech Microeng. https://doi.org/10.1088/0960-1317/20/11/11501610.1088/0960-1317/20/11/115016 ↗
3. Kassavetis S, Mitsakakis K, Logothetidis S (2007) Nanoscale patterning and deformation of soft matter by scanning probe microscopy. Mater Sci Eng C 27:1456. https://doi.org/10.1016/j.msec.2006.08.00410.1016/j.msec.2006.08.004 ↗
4. Kawasegi N, Takano N, Oka D et al (2006) Nanomachining of silicon surface using atomic force microscope with diamond tip. J Manuf Sci Eng-Trans ASME 128:723–72910.1115/1.2163364 ↗
5. Zambaldi C, Raabe D (2010) Plastic anisotropy of gamma-TiAl revealed by axisymmetric indentation. Acta Mater 58:3516. https://doi.org/10.1016/j.actamat.2010.02.02510.1016/j.actamat.2010.02.025 ↗
6. Wang Y, Raabe D, Kluber C, Roters F (2004) Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals. Acta Mater 52:2229. https://doi.org/10.1016/j.actamat.2004.01.01610.1016/j.actamat.2004.01.016 ↗
7. Liu M, Lu C, Tieu KA, Peng CT, Kong C (2015) A combined experimental-numerical approach for determining mechanical properties of aluminum subjects to nanoindentation. Sci Rep. https://doi.org/10.1038/srep1507210.1038/srep15072 ↗
8. Zhu J, Xiong C, Ma L et al (2020) Coupled effect of scratching direction and speed on nano-scratching behavior of single crystalline copper. Tribol Int. https://doi.org/10.1016/j.triboint.2020.10638510.1016/j.triboint.2020.106385 ↗
9. Chavoshi SZ, Xu S (2018) A review on micro- and nanoscratching/tribology at high temperatures: instrumentation and experimentation. J Mater Eng Perform 27:3844. https://doi.org/10.1007/s11665-018-3493-510.1007/s11665-018-3493-5 ↗
10. Brinckmann S, Dehm G (2015) Nanotribology in austenite: plastic plowing and crack formation. Wear 338:436. https://doi.org/10.1016/j.wear.2015.05.00110.1016/j.wear.2015.05.001 ↗
11. Xu N, Han W, Wang Y, Li J, Shan Z (2017) Nanoscratching of copper surface by CeO2. Acta Mater 124:343. https://doi.org/10.1016/j.actamat.2016.11.00810.1016/j.actamat.2016.11.008 ↗
12. Hodge AM, Nieh TG (2004) Evaluating abrasive wear of amorphous alloys using nanoscratch technique. Intermetallics 12:741. https://doi.org/10.1016/j.intermet.2004.02.01410.1016/j.intermet.2004.02.014 ↗
13. Vencl A, Manic N, Popovic V, Mrdak M (2010) Possibility of the abrasive wear resistance determination with scratch tester. Tribol Lett 37:591. https://doi.org/10.1007/s11249-009-9556-x10.1007/s11249-009-9556-x ↗
14. Charitidis CA (2010) Nanomechanical and nanotribological properties of carbon-based thin films: a review. Int J Refract Met Hard Mater 28:51. https://doi.org/10.1016/j.ijrmhm.2009.08.00310.1016/j.ijrmhm.2009.08.003 ↗
15. Ha S, Jang J-H, Kim K (2017) Finite element implementation of dislocation-density-based crystal plasticity model and its application to pure aluminum crystalline materials. Int J Mech Sci 120:249. https://doi.org/10.1016/j.ijmecsci.2016.11.01110.1016/j.ijmecsci.2016.11.011 ↗
16. Choi SH, Kim EY, Woo W, Han SH, Kwak JH (2013) The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension. Int J Plast 45:85. https://doi.org/10.1016/j.ijplas.2012.11.01310.1016/j.ijplas.2012.11.013 ↗
17. Choi SH, Kim DW, Seong BS, Rollett AD (2011) 3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression. Int J Plast 27:1702. https://doi.org/10.1016/j.ijplas.2011.05.01410.1016/j.ijplas.2011.05.014 ↗
18. Wei P, Lu C, Tieu K, Su L, Deng G, Huang W (2017) A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion. Mater Sci Eng A 684:239. https://doi.org/10.1016/j.msea.2016.11.09810.1016/j.msea.2016.11.098 ↗
19. Wang Z, Zhang J, Xu Z et al (2019) Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper. J Manuf Process 38:187. https://doi.org/10.1016/j.jmapro.2019.01.00710.1016/j.jmapro.2019.01.007 ↗
20. Wang Z, Zhang H, Li Z et al (2019) Crystal plasticity finite element simulation and experiment investigation of nanoscratching of single crystalline copper. Wear 430:100. https://doi.org/10.1016/j.wear.2019.04.02410.1016/j.wear.2019.04.024 ↗
21. Becker R, Butler JF, Hu H, Lalli LA (1991) Analysis of an aluminum single-crystal with unstable initial orientation (001) 110 in channel die compression. Metall Trans A 22:45. https://doi.org/10.1007/bf0335094810.1007/bf03350948 ↗
22. Zhao Z, Ramesh M, Raabe D, Cuitino AM, Radovitzky R (2008) Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal. Int J Plast 24:2278. https://doi.org/10.1016/j.ijplas.2008.01.00210.1016/j.ijplas.2008.01.002 ↗
23. Zhao Z, Kuchnicki S, Radovitzky R, Cultino A (2007) Influence of in-grain mesh resolution on the prediction of deformation textures in fcc polycrystals by crystal plasticity FEM. Acta Mater 55:2361. https://doi.org/10.1016/j.actamat.2006.11.03510.1016/j.actamat.2006.11.035 ↗
24. Eisenlohr P, Roters F (2008) Selecting a set of discrete orientations for accurate texture reconstruction. Comput Mater Sci 42:670. https://doi.org/10.1016/j.commatsci.2007.09.01510.1016/j.commatsci.2007.09.015 ↗
25. Raabe D, Roters F (2004) Using texture components in crystal plasticity finite element simulations. Int J Plast 20:339. https://doi.org/10.1016/s0749-6419(03)00092-510.1016/s0749-6419(03)00092-5 ↗
26. Roters F, Eisenlohr P, Hantcherli L, Tjahjanto DD, Bieler TR, Raabe D (2010) Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications. Acta Mater 58:1152. https://doi.org/10.1016/j.actamat.2009.10.05810.1016/j.actamat.2009.10.058 ↗
27. Roters F, Diehl M, Shanthraj P et al (2019) DAMASK–The dusseldorf advanced material simulation kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale. Comput Mater Sci 158:420. https://doi.org/10.1016/j.commatsci.2018.04.03010.1016/j.commatsci.2018.04.030 ↗
28. Wang ZF, Zhang JJ, ul Hassan H et al (2018) Coupled effect of crystallographic orientation and indenter geometry on nanoindentation of single crystalline copper. Int J Mech Sci 148:531–539. https://doi.org/10.1016/j.ijmecsci.2018.09.00710.1016/j.ijmecsci.2018.09.007 ↗