Rapid and effective method of laser metallization of dielectric materials using deep eutectic solvents with copper acetate
Source abstract
Abstract
In this paper, we proposed rapid laser-induced synthesis of copper micropatterns on the surface of oxide glass from deep eutectic solvents (DESs) consisting of choline chloride, citric or tartaric acid and copper acetate as copper plating solutions. It was shown that upon irradiation with continuous-wave 532-nm laser radiation, it is possible to increase the deposition rate of copper and create micropatterns with a resistance close to the value of pure metal together with high adhesion to the substrate surface. This metallization method is favorable for the practical use of copper patterns, including in production of new printable microelectronic devices. Thus, we demonstrated the possibility of copper deposition on arbitrary three-dimensional surfaces. Moreover, the resulting copper micropatterns were tested as working electrodes for non-enzymatic glucose. Finally, the proposed technology can be successfully used for design and development of sensor platforms for the electrochemical analysis and microelectronic devices
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ionic liquids properties and applications · Laser-Ablation Synthesis of Nanoparticles · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Khan S, Lorenzelli L, Dahiya RS (2014) Technologies for printing sensors and electronics over large flexible substrates: a review. IEEE Sens J 15(6):3164–3185. https://doi.org/10.1109/JSEN.2014.237520310.1109/JSEN.2014.2375203 ↗
2. Zhang J, Feng J, Jia L, Zhang H, Zhang G, Sun S, Zhou T (2019) Laser-induced selective metallization on polymer substrates using organocopper for portable electronics. ACS Appl Mater Interfaces 11(14):13714–13723. https://doi.org/10.1021/acsami.9b0185610.1021/acsami.9b01856 ↗
3. Bai S et al (2017) Laser-assisted reduction of highly conductive circuits based on copper nitrate for flexible printed sensors. Nano-Micro Lett 9:4. https://doi.org/10.1007/s40820-017-0139-310.1007/s40820-017-0139-3 ↗
4. Binh Nam V, Thi Giang T, Lee D (2021) Laser digital patterning of finely-structured flexible copper electrodes using copper oxide nanoparticle ink produced by a scalable synthesis method. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2021.15117910.1016/j.apsusc.2021.151179 ↗
5. Ratautas K, Andrulevičius M, Jagminienė A, Stankevičienė I, Norkus E, Račiukaitis G (2019) Laser-assisted selective copper deposition on commercial PA6 by catalytic electroless plating—process and activation mechanism. Appl Surf Sci 470:405–410. https://doi.org/10.1016/j.apsusc.2018.11.09110.1016/j.apsusc.2018.11.091 ↗
6. Khairullina EM, Panov MS, Andriianov VS, Ratautas K, Tumkin II, Račiukaitis G (2021) High rate fabrication of copper and copper-gold electrodes by laser-induced selective electroless plating for enzyme-free glucose sensing. RSC Adv 11:32. https://doi.org/10.1039/d1ra01565f10.1039/d1ra01565f ↗
7. Ratautas K et al (2017) Laser-induced selective metallization of polypropylene doped with multiwall carbon nanotubes. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2017.03.23810.1016/j.apsusc.2017.03.238 ↗
8. Rytlewski P et al (2020) Laser-induced surface activation and electroless metallization of polyurethane coating containing copper(II) L-tyrosine. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2019.14442910.1016/j.apsusc.2019.144429 ↗
9. Rytlewski P et al (2021) Laser activated and electroless metalized polyurethane coatings containing copper(Ii) l-tyrosine and glass microspheres. Molecules 26:18. https://doi.org/10.3390/molecules2618557110.3390/molecules26185571 ↗
10. Huang Y, Xie X, Li M, Xu M, Long J (2021) Copper circuits fabricated on flexible polymer substrates by a high repetition rate femtosecond laser-induced selective local reduction of copper oxide nanoparticles. Opt Express 29:3. https://doi.org/10.1364/oe.41677210.1364/oe.416772 ↗
11. Mizoshiri M, Arakane S, Sakurai J, Hata S (2016) Direct writing of Cu-based micro-temperature detectors using femtosecond laser reduction of CuO nanoparticles. Appl Phys Express 9:3. https://doi.org/10.7567/APEX.9.03670110.7567/APEX.9.036701 ↗
12. Logunov LS et al (2018) Influence of the ligand nature on the in situ laser-induced synthesis of the electrocatalytically active copper microstructures. Arab J Chem 11:5. https://doi.org/10.1016/j.arabjc.2017.11.00310.1016/j.arabjc.2017.11.003 ↗
13. Gordeychuk DI et al (2020) Copper-based nanocatalysts produced via laser-induced ex situ generation for homo- and cross-coupling reactions. Chem Eng Sci. https://doi.org/10.1016/j.ces.2020.11594010.1016/j.ces.2020.115940 ↗
14. Panov MS, Tumkin II, Smikhovskaia AV, Khairullina EM, Gordeychuk DI, Kochemirovsky VA (2016) High rate in situ laser-induced synthesis of copper nanostructures performed from solutions containing potassium bromate and ethanol. Microelectron Eng. https://doi.org/10.1016/j.mee.2016.02.01410.1016/j.mee.2016.02.014 ↗
15. Tumkin II et al (2015) Laser-induced deposition of nanostructured copper microwires on surfaces of composite materials. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2014.09.03010.1016/j.surfcoat.2014.09.030 ↗
16. Panov MS et al (2017) Non-enzymatic sensors based on in situ laser-induced synthesis of copper-gold and gold nano-sized microstructures. Talanta. https://doi.org/10.1016/j.talanta.2017.01.08910.1016/j.talanta.2017.01.089 ↗
17. Kochemirovsky VA, Safonov SV, Tumkin II, Tver’Yanovich YS, Balova IA, Menchikov LG (2011) Optimization of the solution composition for laser-induced chemical liquid phase deposition of copper. Russ Chem Bull 60:8. https://doi.org/10.1007/s11172-011-0232-610.1007/s11172-011-0232-6 ↗
18. Cao YY, Takeyasu N, Tanaka T, Duan XM, Kawata S (2009) 3D metallic nanostructure fabrication by surfactant-assisted multiphoton-induced reduction. Small 5:10. https://doi.org/10.1002/smll.20080117910.1002/smll.200801179 ↗
19. Mamonova DV et al (2021) Laser-induced deposition of plasmonic Ag and Pt nanoparticles, and periodic arrays. Mater Basel 14:1. https://doi.org/10.3390/ma1401001010.3390/ma14010010 ↗
20. Barton P, Mukherjee S, Prabha J, Boudouris BW, Pan L, Xu X (2017) Fabrication of silver nanostructures using femtosecond laser-induced photoreduction. Nanotechnology 28:50. https://doi.org/10.1088/1361-6528/aa977b10.1088/1361-6528/aa977b ↗
21. Winter S, Zenou M, Kotler Z (2016) Conductivity of laser printed copper structures limited by nano-crystal grain size and amorphous metal droplet shell. J Phys D Appl Phys 49:16. https://doi.org/10.1088/0022-3727/49/16/16531010.1088/0022-3727/49/16/165310 ↗
22. Gorodesky N et al (2021) Improving compactness of 3d metallic microstructures printed by laser-induced forward transfer. Crystals 11:3. https://doi.org/10.3390/cryst1103029110.3390/cryst11030291 ↗
23. Ur Rehman Z, Yang F, Wang M, Zhu T (2023) Fundamentals and advances in laser-induced transfer. Opt Laser Technol. https://doi.org/10.1016/j.optlastec.2022.10906510.1016/j.optlastec.2022.109065 ↗
24. Tumkin I, Khairullina EM, Panov MS, Yoshidomi K, Mizoshiri M (2021) Copper and nickel microsensors produced by selective laser reductive sintering for non-enzymatic glucose detection. Mater Basel 14:10. https://doi.org/10.3390/ma1410249310.3390/ma14102493 ↗
25. Mizoshiri M, Nishitani K, Hata S (2018) Effect of heat accumulation on femtosecond laser reductive sintering of mixed CuO/NiO nanoparticles. Micromachines 9:6. https://doi.org/10.3390/mi906026410.3390/mi9060264 ↗
26. Theodorakos I, Zacharatos F, Geremia R, Karnakis D, Zergioti I (2015) “Selective laser sintering of Ag nanoparticles ink for applications in flexible electronics. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2014.10.12010.1016/j.apsusc.2014.10.120 ↗
27. Ratautas K, Vosylius V, Jagminienė A, Stankevičienė I, Norkus E, Račiukaitis G (2020) Laser-induced selective electroless plating on pc/abs polymer: Minimisation of thermal effects for supreme processing speed”. Polymers Basel 12:10. https://doi.org/10.3390/polym12102427410.3390/polym121024274 ↗
28. Ratautas K, Jagminienė A, Stankevičienė I, Sadauskas M, Norkus E, Račiukaitis G (2020) Evaluation and optimisation of the SSAIL method for laser-assisted selective electroless copper deposition on dielectrics. Res Phys. https://doi.org/10.1016/j.rinp.2020.10294310.1016/j.rinp.2020.102943 ↗
29. Panov MS, Khairullina EM, Vshivtcev FS, Ryazantsev MN, Tumkin II (2020) Laser-induced synthesis of composite materials based on iridium, gold and platinum for non-enzymatic glucose sensing. Mater Basel 13:15. https://doi.org/10.3390/ma1315335910.3390/ma13153359 ↗
30. Smikhovskaia AV et al (2019) In situ laser-induced synthesis of copper-silver microcomposite for enzyme-free D-glucose and L-alanine sensing. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2019.05.06110.1016/j.apsusc.2019.05.061 ↗
31. Smikhovskaia AV et al (2018) In situ laser-induced codeposition of copper and different metals for fabrication of microcomposite sensor-active materials. Anal Chim Acta. https://doi.org/10.1016/j.aca.2018.07.04210.1016/j.aca.2018.07.042 ↗
32. Levshakova AS et al (2023) Modification of nickel micropatterns for sensor-active applications from deep eutectic solvents. Opt Quantum Electron 55:3. https://doi.org/10.1007/s11082-022-04403-210.1007/s11082-022-04403-2 ↗
33. Shishov A et al (2021) Laser-induced deposition of copper from deep eutectic solvents: optimization of chemical and physical parameters. New J Chem 45:46. https://doi.org/10.1039/d1nj04158d10.1039/d1nj04158d ↗
34. Levshakova AS et al (2022) Highly rapid direct laser fabrication of Ni micropatterns for enzyme-free sensing applications using deep eutectic solvent. Mater Lett. https://doi.org/10.1016/j.matlet.2021.13108510.1016/j.matlet.2021.131085 ↗
35. Smith EL, Abbott AP, Ryder KS (2014) Deep eutectic solvents (DESs) and their applications. Chem Rev 114:21. https://doi.org/10.1021/cr300162p10.1021/cr300162p ↗
36. Hansen BB et al (2021) Deep eutectic solvents: a review of fundamentals and applications. Chem Rev 121:3. https://doi.org/10.1021/acs.chemrev.0c00385610.1021/acs.chemrev.0c003856 ↗
37. Tomé LIN, Baião V, da Silva W, Brett CMA (2018) Deep eutectic solvents for the production and application of new materials. Appl Mater Today. https://doi.org/10.1016/j.apmt.2017.11.00510.1016/j.apmt.2017.11.005 ↗
38. Shishov A, Gordeychuk D, Logunov L, Tumkin I (2019) High rate laser deposition of conductive copper microstructures from deep eutectic solvents. Chem Commun 55:65. https://doi.org/10.1039/c9cc05184h10.1039/c9cc05184h ↗
39. Neese F, Wennmohs F, Becker U, Riplinger C (2020) The ORCA quantum chemistry program package. J Chem Phys 152:22. https://doi.org/10.1063/5.000460810.1063/5.0004608 ↗
40. Fawcett WR (2008) The ionic work function and its role in estimating absolute electrode potentials. Langmuir 24:17. https://doi.org/10.1021/la703897610.1021/la7038976 ↗
41. Altan CL, Gurten B, Sommerdijk NAJM, Bucak S (2014) Deterioration in effective thermal conductivity of aqueous magnetic nanofluids. J Appl Phys 116:22. https://doi.org/10.1063/1.490244110.1063/1.4902441 ↗
42. Albayati N, Kadhom M, Abdullah G, Salih S (2021) Thermal conductivity of room temperature deep eutectic solvents. J Therm Sci 30:6. https://doi.org/10.1007/s11630-021-1428-110.1007/s11630-021-1428-1 ↗
43. Landaluce H, Arjona L, Perallos A, Falcone F, Angulo I, Muralter F (2020) A review of iot sensing applications and challenges using RFID and wireless sensor networks. Sens Switz 20:9. https://doi.org/10.3390/s2009249510.3390/s20092495 ↗
44. Someya T, Amagai M (2019) Toward a new generation of smart skins. Nat Biotechnol 37:4. https://doi.org/10.1038/s41587-019-0079-110.1038/s41587-019-0079-1 ↗
45. Le Borgne B, De Sagazan O, Crand S, Jacques E, Harnois M (2017) Conformal electronics wrapped around daily life objects using an original method: water transfer printing. ACS Appl Mater Interfaces 9:35. https://doi.org/10.1021/acsami.7b0732710.1021/acsami.7b07327 ↗
46. Tao H, Brenckle MA, Yang M, Zhang J, Liu M, Siebert SM, Averitt RD, Mannoor MS, McAlpine MC, Rogers JA, Kaplan DL (2012) Silk-based conformal, adhesive, edible food sensors. Adv Mater 24(8):1067–1072. https://doi.org/10.1002/adma.20110381410.1002/adma.201103814 ↗
47. Hou J, Liu F, Shi GX, ZhaoTan JW, Wang G (2022) Recent advances in silver nanowires electrodes for flexible organic/perovskite light-emitting diodes. Front Chem. https://doi.org/10.3389/fchem.2022.86418610.3389/fchem.2022.864186 ↗
48. Li YT et al (2022) Review on organic-inorganic two-dimensional perovskite-based optoelectronic devices. ACS Appl Electron Mater 4:2. https://doi.org/10.1021/acsaelm.1c0078110.1021/acsaelm.1c00781 ↗
49. Lloyd D, Vainikka T, Murtomäki L, Kontturi K, Ahlberg E (2011) The kinetics of the Cu2+/Cu+ redox couple in deep eutectic solvents. Electrochim Acta 56:14. https://doi.org/10.1016/j.electacta.2011.03.13310.1016/j.electacta.2011.03.133 ↗
50. De Vreese P et al (2012) Speciation of copper(II) complexes in an ionic liquid based on choline chloride and in choline chloride/water mixtures. Inorg Chem 51:9. https://doi.org/10.1021/ic202341m10.1021/ic202341m ↗
51. Lin T, Xu Y, Zhao A, He W, Xiao F (2022) Flexible electrochemical sensors integrated with nanomaterials for in situ determination of small molecules in biological samples: a review. Anal Chim Acta. https://doi.org/10.1016/j.aca.2022.33946110.1016/j.aca.2022.339461 ↗
52. Yuan F, Xia Y, Lu Q, Xu Q, Shu Y, Hu X (2022) Recent advances in inorganic functional nanomaterials based flexible electrochemical sensors. Talanta. https://doi.org/10.1016/j.talanta.2022.12341910.1016/j.talanta.2022.123419 ↗
53. Luo Y, Fan C, Song Y, Xu T, Zhang X (2022) Ultra-trace enriching biosensing in nanoliter sample. Biosens Bioelectron. https://doi.org/10.1016/j.bios.2022.11429710.1016/j.bios.2022.114297 ↗
54. Bruen D, Delaney C, Florea L, Diamond D (2017) Glucose sensing for diabetes monitoring: recent developments. Sens Switz 17:8. https://doi.org/10.3390/s1708186610.3390/s17081866 ↗
55. Lee H et al (2017) Wearable/disposable sweat-based glucose monitoring device with multistage transdermal drug delivery module. Sci Adv 3:3. https://doi.org/10.1126/sciadv.160131410.1126/sciadv.1601314 ↗
56. Lin T (2017) Non-invasive glucose monitoring: a review of challenges and recent advances. Curr Trends Biomed Eng Biosci 6:5. https://doi.org/10.19080/ctbeb.2017.06.55569610.19080/ctbeb.2017.06.555696 ↗