Surface tension of liquid Ti, V and their binary alloys measured by electromagnetic levitation
Source abstract
Abstract
Abstract The surface tension of the liquid Ti-V system is systematically measured using the oscillating drop technique during electromagnetic levitation. Temperature- and compositional dependence are both investigated. The entire compositional range is covered. A linear decrease with increasing temperature is found for the pure elements as well as for all investigated alloys. The surface tension generally increases with increasing V-content. The obtained data are in good agreement with the Butler model for the ideal solution. Additionally, the Butler model for the regular solution was evaluated in the context of the obtained surface tension data. In contrast to many other Ti-based alloys, the Butler model for the regular solution yields no additional benefit for Ti-V, since there is only a neglectable small deviation between the calculations for the ideal and regular solution. Segregation effects are modeled using the Butler equation for an ideal solution. The findings are discussed considering already existing trends for the mixing behavior of liquid Ti-alloys. The results strongly suggest, that the Ti-V system obeys in general the ideal solution law.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Boyer R (1996) An overview on the use of titanium in the aerospace industry. Mater Sci Eng 213:103–11410.1016/0921-5093(96)10233-1 ↗
2. Williams JC, Boyer R (2020) Opportunities and issues in the application of titanium alloys for aerospace components. Metals 10:1–2210.3390/met10060705 ↗
3. Baufeld B, BiestGault OR (2009) Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: microstructure and mechanical properties. Mater Design 31:106–11110.1016/j.matdes.2009.11.032 ↗
4. Zhang T, Liu C-T (2022) Design of titanium alloys by additive manufacturing: a critical review. Adv Powder Mater 5:1–11
5. Khorasani AM, Goldberg M, Doeven EH, Littlefair G (2015) Titanium in biomedical applications-properties and fabrication: a review. J Biomater Tissue Eng 5:593–61910.1166/jbt.2015.1361 ↗
6. Assis SL, Costa I (2007) Electrochemical evaluation of Ti-13Nb-13Zr, Ti-6Al-4V and Ti-6Al-7Nb alloys for biomedicalapplication by long-term immersion tests. Mater Corros 5:329–33310.1002/maco.200604027 ↗
7. M Mohr, R Wunderlich and H Fecht,(2022) Thermophysical properties of titanium alloys. In metallurgy in space—recent results from ISS. The Minerals, Metals and Materials Series, Springer, Cham10.1007/978-3-030-89784-0_16 ↗
8. Egry I, Brooks R, Holland-Moritz D, Novakovic R, Matsushita T, Ricci E, Seetharaman S, Wunderlich R, Jarvis D (2007) Thermophysical properties of γ -titanium aluminide: the European IMPRESS project. Int J Thermophys 28:1026–103610.1007/s10765-007-0219-6 ↗
9. Zhao G-H, Liang X, Xu X, Gamża M, Mao H, Louzguine-Luzgin D, Rivera-Díaz-del-Castillo P (2021) Alloy design by tailoring phase stability in commercial Ti alloys. Mater Sci Eng A 815:1–10. https://doi.org/10.1016/j.msea.2021.14122910.1016/j.msea.2021.141229 ↗
10. Shah FA, Trobos M, Thomsen P, Palmquist A (2016) Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants—Is one truly better than the other? Mater Sci Eng, C 62:960–96610.1016/j.msec.2016.01.032 ↗
11. Liu S, Shin YC (2019) Additive manufacturing of Ti6Al4V alloy: a review. Mater Design 164:107552-1–107623
12. Uhlmann E, Kersting R, Klein TB, Cruz MF, Borille AV (2015) Additive manufacturing of titanium alloy for aircraft components. Procedia CIRP 35:55–6010.1016/j.procir.2015.08.061 ↗
13. Mohr M, Wunderlich RNR, Ricci E, Fecht H (2020) Precise Measurements of thermophysical properties of liquid Ti–6Al–4V (Ti64) alloy on board the international space station. Adv Eng Mater 22:1–1010.1002/adem.202000169 ↗
14. Nowak R, Lanata T, Sobczak N, Ricci E, Giuranno D, Novakovic R, Holland-Moritz D, Egry I (2010) Surface tension of y-TiAl-based alloys. J Mater Sci 45:1993–200110.1007/s10853-009-4061-z ↗
15. Sung S-Y, Kim Y-J (2007) Modeling of titanium aluminides turbo-charger casting. Intermetallics 15:468–47410.1016/j.intermet.2006.07.009 ↗
16. Wang Q, Zhang W, Li S, Tong M, Hou W, Wang H, Hao Y, Harriso NM, Yang R (2021) Material characterisation and computational thermal modelling of electron beam powder bed fusion additive manufacturing of Ti2448 titanium alloy. Materials 14(23):735910.3390/ma14237359 ↗
17. Wessing JJ, Brillo J (2016) Density, molar volume, and surface tension of liquid Al-Ti. Miner Met Mater Soc ASM Int 48:898–882
18. Brillo J, Wessing JJ, Kobatake H, Fukuyama H (2021) Molar heat capacity of liquid Ti, Al20Ti80 and Al50Ti50 measured in electromagnetic levitation. High Temp High Press 51(2):14510.32908/hthp.v51.1169 ↗
19. Brillo J, Wessing JJ, Kobatake H, Fukuyama H (2019) Normal spectral emissivity of liquid Al-Ti binary alloys. High Tempe-High Press 48:423–43810.32908/hthp.v48.783 ↗
20. J. J. Wessing, (2018) Thermophysical properties of liquid Al-Ti alloys under the influence of oxygen doctoral dissertation. RWTH Aachen Chair for Foundry Science and Foundry Institute
21. Reiplinger B, Brillo J (2022) Density and excess volume of the liquid Ti–V system measured in electromagnetic levitation. J Mater Sci 57(16):7954. https://doi.org/10.1007/s10853-022-07090-210.1007/s10853-022-07090-2 ↗
22. Novakovic R, Giuranno D, Ricci E, Tuissi A, Wunderlichc R, Fecht H, Egry I (2012) Surface, dynamic and structural properties of liquid Al–Ti alloys. Appl Surf Sci 258(7):3269–327510.1016/j.apsusc.2011.11.080 ↗
23. Murray JL (1981) The Ti−V (Titanium-Vanadium) system. Bull Alloy Phase Diagr 2:48–5510.1007/BF02873703 ↗
24. Brillo J, Lohofer G, Schmidt-Hohagen F, Schneider S, Egry I (2006) Thermophysical property measurements of liquid metals by electromagnetic levitation. Int J Mater Prod Technol 26:247–27310.1504/IJMPT.2006.009469 ↗
25. Butler JAV (1932) The thermodynamics of the surfaces of solutions. Proc Roy Soc A135:348–375
26. Kaptay G (2015) The partial surface tension of components of a solution. Langmuir 31:5796–580410.1021/acs.langmuir.5b00217 ↗
27. Kaptay G (2022) Extension of the Gibbs-Duhem relation to partial molar surface thermodynamic properties of solutions. Langmuir 39(16):4906
28. Kaptay G (2008) A unified model for the cohesive enthalpy, critical temperature, surface tension and thermal volume thermal expansion coefficient of liquid metals of bcc, fcc, and hcp crystals. Mater Sci Eng A 495:19–2610.1016/j.msea.2007.10.112 ↗
29. J Brillo (2016) Thermophysical properties of multicomponent liquid alloys. walter de Gruyter GmbH, Berlin.10.1515/9783110468991 ↗
30. Ansara I, Dinsdale AT, M. H. (1998) Rand, COST 507: thermochemical database for light metal alloys. Off Off Publ Eur Commun 2:297–299
31. Amore S, Brillo J, Egry I (2011) Experimental measurment of surface tension of of Cu-Ti liquid alloys. High Temp High Press 40:225–235
32. Brillo J, Kolland G (2016) Surface tension of liquid Al-Au binary alloys. J Mater Sci 51(10):4888. https://doi.org/10.1007/s10853-016-9794-x10.1007/s10853-016-9794-x ↗
33. Margrave JL, Krishnan S, Hansen GP, Hauge RH (1990) Spectral emissivities and optical properties of electromagnetically levitated liquid metals as functions of temperature and wavelength. High temp sci 29:17–52
34. Egry I, Diefenbach A, Dreier W, Piller J (2001) Containerless processing in space thermophysical property measurements using electromagnetic levitation. Int J Thermophys 22:569–57810.1023/A:1010753805462 ↗
35. Kobatake H, Brillo J, Schmitz J, Pichon P-Y (2015) Surface tension of binary Al-Si liquid alloys. J Mat Sci 50:3351–336010.1007/s10853-015-8883-6 ↗
36. Brillo J, Lauletta G, Vaianella L, Arato E, Giuranno D, Novakovic R, Ricci E (2014) Surface tension of liquid Ag-Cu binary alloys. ISIJ Int 54:2115–211910.2355/isijinternational.54.2115 ↗
37. Soldi L, Quaini A, Gosse S, Brillo J, Roskosz M (2020) Thermodynamic and thermophysical properties of Cu-Si liquid alloys. High Temp High Press 49:155–17110.32908/hthp.v49.845 ↗
38. Cummings DL, Blackburn DA (1991) Oscillations of magnetically levitated aspherical droplets. J Fluid Mech 224:395–41610.1017/S0022112091001817 ↗
39. Brillo J, Wessing J, Kobatake H, Fukuyama H (2019) Surface tension of liquid Ti with adsorbed oxygen and its prediction. J Mol Liq 290:1–1210.1016/j.molliq.2019.111226 ↗
40. Paradis P-F, Ishikawa T, Lee G-W, Holland-Moritz D, Brillo J, Rhim W-K, Okada JT (2014) Materials properties measurements and particle beam interactions studies using electrostatic levitation. Mater Sci Eng R Rep 76:1–5310.1016/j.mser.2013.12.001 ↗
41. Paradis P-F, Rhim W-K (2000) Non-contact measurements of thermophysical properties of titanium at high temperature. J Chem Thermodyn 32:123–13310.1006/jcht.1999.0576 ↗
42. Okada JT, Ishikawa T, Watanabe Y, Paradis P-F (2010) Surface tension and viscosity of molten vanadium measured with an electrostatic levitation furnace. J Chem Thermodyn 42:856–85910.1016/j.jct.2010.02.008 ↗
43. Egry I, Holland-Moritz D, Novakovic R, Ricci E, Wunderlich R, Sobczak N (2010) Thermophysical properties of liquid AlTi-based alloys. Int J Thermophys 31:949–96510.1007/s10765-010-0704-1 ↗
44. D. A. Porter, K. E. Easterling and M. Y. Sherif, (2009) Phase transformations in metals and alloys. T a F Group, Eds Boca Raton: CRC Press10.1201/9781439883570 ↗
45. Fedorov P, Volkov S (2016) Chemistry, physics, materials science. Russ J Inorg Chem 61:772–77510.1134/S0036023616060061 ↗
46. Massalski TB (1986) Binary alloy phase diagrams. American Society for Metals
47. Kostov A, Živković D (2008) Thermodynamic analysis of alloys Ti–Al, Ti–V, Al–V and Ti–Al–V. J Alloy Compd 160:164–17110.1016/j.jallcom.2007.05.059 ↗
48. Allen BC (1963) The surface tension of liquid transition metals at their melting points. Trans AIME 227:1175
49. Amore S, Delsante S, Kobatake H, Brillo J (2013) Excess volume and heat of mixing in Cu-Ti liquid mixture. J Chem Phys 139:1–610.1063/1.4817679 ↗