Application of organosilanes in titanium-containing organic–inorganic hybrid coatings
Source abstract
Abstract
Organic–inorganic hybrid coatings (OIHCs) are novel functional coatings, which are suitable for corrosion protection due to their combinations of the advantages of organic and inorganic coatings. Recently, research on titanium-containing OIHCs has attracted much attention because of the improvement of coating performance by titanium-containing materials. This review highlights the most recent development of titanium-containing OIHCs, including their synthetic approaches, classification and applications. Firstly, three typical preparation methods, the sol–gel, electrophoretic deposition and spray method, are introduced in detail. Then, the applications of organosilanes in OIHCs are classified into two parts: as the coupling agents and as the organic matrix, respectively, as well as their functional mechanisms are elaborated. Moreover, the roles of titanium-containing materials in the improvements of coatings are focused on and clarified. Finally, representative application examples from this OIHCs material in the field of biomaterial, solar energy, energy transportation, anti-microbial corrosion and photogenerated cathodic protection have been summarized and discussed. This review mainly covers the publications of OIHCs in the period of years from 2016 to 2020.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Marine Biology and Environmental Chemistry · Electrophoretic Deposition in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ali MM, Magee JC, Hsieh PY (2020) Corrosion protection of steel pipelines with metal-polymer composite barrier liners. J Nat Gas Sci Eng 81:103407. https://doi.org/10.1016/j.jngse.2020.10340710.1016/j.jngse.2020.103407 ↗
2. Ryu S, Kwon YJ, Kim Y, Lee JU (2020) Corrosion protection coating of three-dimensional metal structure by electrophoretic deposition of graphene oxide. Mater Chem Phys 250:123039. https://doi.org/10.1016/j.matchemphys.2020.12303910.1016/j.matchemphys.2020.123039 ↗
3. Vignesh RB, Sethuraman MG (2014) Corrosion protection behaviour of sol–gel derived N,N-dimethylthiourea doped 3-glycidoxypropyltrimethoxysilane on aluminium. Prog Org Coat 77:136–141. https://doi.org/10.1016/j.porgcoat.2013.08.01210.1016/j.porgcoat.2013.08.012 ↗
4. Wang YS, Liu L, Fu Q, Sun J, An ZY, Ding R, Li Y, Zhao XD (2020) Effect of Bacillus subtilis on corrosion behavior of 10MnNiCrCu steel in marine environment. Sci Rep 10:5744. https://doi.org/10.1038/s41598-020-62809-y10.1038/s41598-020-62809-y ↗
5. Zubielewicz M, Kamińska-Tarnawska E, Kozłowska A (2005) Protective properties of organic phosphate-pigmented coatings on phosphated steel substrates. Prog Org Coat 53:276–285. https://doi.org/10.1016/j.porgcoat.2005.02.00810.1016/j.porgcoat.2005.02.008 ↗
6. Figueira RB, Silva CJR, Pereira EV (2015) Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: a review of recent progress. J Coat Technol Res 12:1–3510.1007/s11998-014-9595-6 ↗
7. Osborne JH (2001) Observations on chromate conversion coatings from a sol–gel perspective. Prog Org Coat 41:280–28610.1016/S0300-9440(01)00143-6 ↗
8. Dinari M, Haghighi A (2017) Surface modification of TiO2 nanoparticle by three dimensional silane coupling agent and preparation of polyamide/modified-TiO2 nanocomposites for removal of Cr (VI) from aqueous solutions. Prog Org Coat 110:24–34. https://doi.org/10.1016/j.porgcoat.2017.04.04410.1016/j.porgcoat.2017.04.044 ↗
9. Zhao X, Li Y, Li B, Hu T, Yang Y, Li L, Zhang J (2019) Environmentally benign and durable superhydrophobic coatings based on SiO2 nanoparticles and silanes. J Colloid Interface Sci 542:8–14. https://doi.org/10.1016/j.jcis.2019.01.11510.1016/j.jcis.2019.01.115 ↗
10. Deng L, Qiao L, Zheng J, Ying Y, Yu J, Li W, Che S, Cai W (2020) Injection molding, debinding and sintering of ZrO2 ceramic modified by silane couping agent. J Eur Ceram Soc 40:1566–1573. https://doi.org/10.1016/j.jeurceramsoc.2019.11.06910.1016/j.jeurceramsoc.2019.11.069 ↗
11. Stojadinović S, Radić N, Tadić N, Vasilić R, Grbić B (2020) Enhanced ultraviolet light driven photocatalytic activity of ZnO particles incorporated by plasma electrolytic oxidation into Al2O3 coatings co-doped with Ce3+. Opt Mater 101:109768. https://doi.org/10.1016/j.optmat.2020.10976810.1016/j.optmat.2020.109768 ↗
12. Zhou J, Li K, Wang B, Ai F (2020) Nano-hydroxyapatite/ZnO coating prepared on a biodegradable Mg–Zn–Ca bulk metallic glass by one-step hydrothermal method in acid situation. Ceram Int 46:6958–6964. https://doi.org/10.1016/j.ceramint.2019.11.07410.1016/j.ceramint.2019.11.074 ↗
13. Sahadev S (2018) Silane coatings of metallic biomaterials for biomedical implants: a preliminary review. J Biomed Mater Res B Appl Biomater 106:2901–291810.1002/jbm.b.34151 ↗
14. Diane Pereira Martins B, de Campos BL, Alvarenga Coutinho Silva A, Serafim Goulart N, Batista Rivero Garcia R, de Simone CL, Yoshie Kawachi E (2020) Silane-based hybrid coatings for the corrosion protection of AA 2024–T3 alloy. J Aerosp Technol Manag 11:58–61. https://doi.org/10.5028/jatm.etmq.7510.5028/jatm.etmq.75 ↗
15. Carli S, Di Lauro M, Bianchi M, Murgia M, De Salvo A, Prato M, Fadiga L, Biscarini F (2020) Water-based PEDOT: nafion dispersion for organic bioelectronics. ACS Appl Mater Interfaces 12:29807. https://doi.org/10.1021/acsami.0c0653810.1021/acsami.0c06538 ↗
16. Atta A, Abdullah M, Al-Lohedan H, Mohamed N (2019) Coating sand with new hydrophobic and superhydrophobic silica/paraffin wax nanocapsules for desert water storage and transportation. Coatings 9:124–136. https://doi.org/10.3390/coatings902012410.3390/coatings9020124 ↗
17. Ou J, Wang F, Li W, Yan M, Amirfazli A (2020) Methyltrimethoxysilane as a multipurpose chemical for durable superhydrophobic cotton fabric. Prog Org Coat 146:105700. https://doi.org/10.1016/j.porgcoat.2020.10570010.1016/j.porgcoat.2020.105700 ↗
18. Kichigina GA, Kushch PP, Kiryukhin DP, Prorokova NP, Kumeeva TY (2020) Use of radiation-synthesized tetrafluoroethylene telomers with silane end groups for hydrophobization of polyester fabric. High Energ Chem 54:123–129. https://doi.org/10.1134/s001814392002009510.1134/s0018143920020095 ↗
19. Fan W, Lu N, Shen Z et al (2019) Generic synthesis of small-sized hollow mesoporous organosilica nanoparticles for oxygen-independent X-ray-activated synergistic therapy. Nat Commun 10:1–14. https://doi.org/10.1038/s41467-019-09158-110.1038/s41467-019-09158-1 ↗
20. Petrunin MA, Gladkikh NA, Maleeva MA et al (2019) The use of organosilanes to inhibit metal corrosion. A review. Int J Corros Scale Inhib 8:882–907. https://doi.org/10.17675/2305-6894-2019-8-4-610.17675/2305-6894-2019-8-4-6 ↗
21. Wang Y-X, Li Y-J, Yang H, Xu Z-L (2019) Super-wetting, photoactive TiO2 coating on amino-silane modified PAN nanofiber membranes for high efficient oil-water emulsion separation application. J Membr Sci 580:40–48. https://doi.org/10.1016/j.memsci.2019.02.06210.1016/j.memsci.2019.02.062 ↗
22. Nyutu EK, Kmetz MA, Suib SL (2006) Formation of MoSi2–SiO2 coatings on molybdenum substrates by CVD/MOCVD. Surf Coat Technol 200:3980–3986. https://doi.org/10.1016/j.surfcoat.2005.02.21210.1016/j.surfcoat.2005.02.212 ↗
23. Jing Y, Wang P, Yang Q, He Y, Bai Y (2020) Molybdenum disulfide with poly(dopamine) and epoxy groups as an efficiently anticorrosive reinforcers in epoxy coating. Synth Met 259:116249. https://doi.org/10.1016/j.synthmet.2019.11624910.1016/j.synthmet.2019.116249 ↗
24. Yu M, Liu Y, Liu J, Li S, Xue B, Zhang Y, Yin X (2015) Effects of cerium salts on corrosion behaviors of Si–Zr hybrid sol–gel coatings. Chin J Aeronaut 28:600–608. https://doi.org/10.1016/j.cja.2015.01.01110.1016/j.cja.2015.01.011 ↗
25. Yari H, Rostami M (2020) Enhanced weathering performance of epoxy/ZnO nanocomposite coatings via functionalization of ZnO UV blockers with amino and glycidoxy silane coupling agents. Prog Org Coat 147:105773. https://doi.org/10.1016/j.porgcoat.2020.10577310.1016/j.porgcoat.2020.105773 ↗
26. Ziadi I, Alves MM, Taryba M, El-Bassi L, Hassairi H, Bousselmi L, Montemor MF, Akrout H (2020) Microbiologically influenced corrosion mechanism of 304L stainless steel in treated urban wastewater and protective effect of silane-TiO2 coating. Bioelectrochemistry 132:107413. https://doi.org/10.1016/j.bioelechem.2019.10741310.1016/j.bioelechem.2019.107413 ↗
27. Cheng W, Li C, Ma X, Yu L, Liu G (2017) Effect of SiO2-doping on photogenerated cathodic protection of nano-TiO2 films on 304 stainless steel. Mater Des 126:155–161. https://doi.org/10.1016/j.matdes.2017.04.04110.1016/j.matdes.2017.04.041 ↗
28. Lei C, Liu Y, Zhou H, Feng Z, Du R (2013) Photogenerated cathodic protection of stainless steel by liquid-phase-deposited sodium polyacrylate/TiO2 hybrid films. Corros Sci 68:214–222. https://doi.org/10.1016/j.corsci.2012.11.01910.1016/j.corsci.2012.11.019 ↗
29. Syafiq A, Pandey AK, Balakrishnan V, Rahim NA (2019) Study on self-cleaning performance and hydrophobicity of TiO2/silane coatings. Pigm Resin Technol 49:26–32. https://doi.org/10.1108/prt-02-2018-001010.1108/prt-02-2018-0010 ↗
30. He Z, Gao T, Duan D, Soucek MD (2019) Effect of mixed sol-gel precursors on inorganic-organic polyurethane hybrid thermosets: DOE study. Prog Org Coat 133:237–248. https://doi.org/10.1016/j.porgcoat.2019.04.02310.1016/j.porgcoat.2019.04.023 ↗
31. Asadi N, Naderi R, Saremi M (2014) Effect of curing conditions on the protective performance of an ecofriendly hybrid silane sol–gel coating with clay nanoparticles applied on mild steel. Ind Eng Chem Res 53:10644–10652. https://doi.org/10.1021/ie500620r10.1021/ie500620r ↗
32. Claire L, Marie G, Julien G, Jean-Michel S, Jean R, Marie-Joëlle M, Stefano R, Michele F (2016) New architectured hybrid sol-gel coatings for wear and corrosion protection of low-carbon steel. Prog Org Coat 99:337–345. https://doi.org/10.1016/j.porgcoat.2016.06.01510.1016/j.porgcoat.2016.06.015 ↗
33. Suleiman RK, Kumar AM, Sorour AA, Al-Badour FA, El Ali B (2018) Hybrid organosiloxane material/metal oxide composite as efficient anticorrosive coatings for mild steel in a saline medium. J App Polym Sci 135:46718. https://doi.org/10.1002/app.4671810.1002/app.46718 ↗
34. Suleiman RK (2019) Improved mechanical and anticorrosion properties of metal oxide-loaded hybrid sol–gel coatings for mild steel in a saline medium. J Adhes Sci Technol 34:1315–1330. https://doi.org/10.1080/01694243.2019.170758310.1080/01694243.2019.1707583 ↗
35. Suleiman RK, Kumar AM, Adesina AY, Al-Badour FA, Meliani MH, Saleh TA (2020) Hybrid organosilicon-metal oxide composites and their corrosion protection performance for mild steel in 3.5% NaCl solution. Corros Sci 169:108637. https://doi.org/10.1016/j.corsci.2020.10863710.1016/j.corsci.2020.108637 ↗
36. Suleiman RK, Kumar AM, Rahman MM, Al-Badour FA, Meliani MH, Saleh TA (2020) Effect of metal oxide additives on the structural and barrier properties of a hybrid organosilicon sol-gel coating in 3.5% NaCl medium. Prog Org Coat 148:105825. https://doi.org/10.1016/j.porgcoat.2020.10582510.1016/j.porgcoat.2020.105825 ↗
37. Alaei M, Atapour M, Labbaf S (2020) Electrophoretic deposition of chitosan-bioactive glass nanocomposite coatings on AZ91 Mg alloy for biomedical applications. Prog Org Coat 147:105803. https://doi.org/10.1016/j.porgcoat.2020.10580310.1016/j.porgcoat.2020.105803 ↗
38. Joung YS, Buie CR (2011) Electrophoretic deposition of unstable colloidal suspensions for superhydrophobic surfaces. Langmuir 27:4156–4163. https://doi.org/10.1021/la200286t10.1021/la200286t ↗
39. Talic B, Wulff AC, Molin S, Andersen KB, Zielke P, Frandsen HL (2019) Investigation of electrophoretic deposition as a method for coating complex shaped steel parts in solid oxide cell stacks. Surf Coat Technol 380:125093. https://doi.org/10.1016/j.surfcoat.2019.12509310.1016/j.surfcoat.2019.125093 ↗
40. Pérez R, Querejeta A, Corres MÁ, Muñoz J, Grande H-J, Honnerová P (2020) Thermal behaviour of vitreous ceramic coatings obtained by electrophoretic deposition for furnace components. Ceram Int 46:20695. https://doi.org/10.1016/j.ceramint.2020.04.21910.1016/j.ceramint.2020.04.219 ↗
41. Biest OOVd, Vandeperre LJ (1999) Electrophoretic deposition of materials. Annu Rev Mater Sci 29:327–35210.1146/annurev.matsci.29.1.327 ↗
42. Emarati SM, Mozammel M (2020) Efficient one-step fabrication of superhydrophobic nano-TiO2/TMPSi ceramic composite coating with enhanced corrosion resistance on 316L. Ceram Int 46:1652–1661. https://doi.org/10.1016/j.ceramint.2019.09.13710.1016/j.ceramint.2019.09.137 ↗
43. Emarati SM, Mozammel M (2018) Fabrication of superhydrophobic titanium dioxide coating on AISI 316L stainless steel by electrophoretic deposition and using trimethoxy(propyl)silane modification. Surf Eng 35:456–465. https://doi.org/10.1080/02670844.2018.152310410.1080/02670844.2018.1523104 ↗
44. Zouaghi S, Six T, Bellayer S, Coffinier Y, Abdallah M, Chihib N-E, André C, Delaplace G, Jimenez M (2018) Atmospheric pressure plasma spraying of silane-based coatings targeting whey protein fouling and bacterial adhesion management. Appl Surf Sci 455:392–402. https://doi.org/10.1016/j.apsusc.2018.06.00610.1016/j.apsusc.2018.06.006 ↗
45. Mojarad Shafiee B, Torkaman R, Mahmoudi M, Emadi R, karamian E, (2019) An improvement in corrosion resistance of 316L AISI coated using PCL-gelatin composite by dip-coating method. Prog Org Coat 130:200–205. https://doi.org/10.1016/j.porgcoat.2019.01.05710.1016/j.porgcoat.2019.01.057 ↗
46. Liu S-H, Zhang H-Y, Wang Y-P, Ji G, Li L, Xu P, Huang J-H, Zhang S-L, Li C-X, Li C-J (2019) Microstructural evolution of alumina coatings by a novel long laminar plasma spraying method. Surf Coat Technol 363:210–220. https://doi.org/10.1016/j.surfcoat.2019.02.01810.1016/j.surfcoat.2019.02.018 ↗
47. Guo J, Wang C, Yu H, Li X (2020) Preparation of a wear-resistant, superhydrophobic SiO2/silicone-modified polyurethane composite coating through a two-step spraying method. Prog Org Coat 146:105710. https://doi.org/10.1016/j.porgcoat.2020.10571010.1016/j.porgcoat.2020.105710 ↗
48. Hutsaylyuk V, Student M, Posuvailo V, Student O, Sirak Y, Hvozdets’kyi V, Maruschak P, Veselivska H (2020) The properties of oxide-ceramic layers with Cu and Ni inclusions synthesizing by PEO method on top of the gas-spraying coatings on aluminium alloys. Vacuum 179:109514. https://doi.org/10.1016/j.vacuum.2020.10951410.1016/j.vacuum.2020.109514 ↗
49. Amri A, Hasan K, Taha H et al (2019) Surface structural features and optical analysis of nanostructured Cu-oxide thin film coatings coated via the sol-gel dip coating method. Ceram Int 45:12888–12894. https://doi.org/10.1016/j.ceramint.2019.03.21310.1016/j.ceramint.2019.03.213 ↗
50. Matin A, Baig U, Akhtar S, Merah N, Gondal MA, Bake AH, Ibrahim A (2019) UV-resistant and transparent hydrophobic surfaces with different wetting states by a facile dip-coating method. Prog Org Coat 136:105192. https://doi.org/10.1016/j.porgcoat.2019.06.03810.1016/j.porgcoat.2019.06.038 ↗
51. Li C, Cao Z, Xie C, Li Z, Fang X, Ou J, Xue M, Wang F, Lei S, Li W (2019) Facile preparation of TiO2/acrylic resin superhydrophobic surface with excellent wear resistance. J Appl Polym Sci 136:4776210.1002/app.47762 ↗
52. Lu Y, Sathasivam S, Song J, Crick CR, Carmalt CJ, Parkin IP (2015) Robust self-cleaning surfaces that functionwhen exposedtoeither air or oil. Science 34:1132–113510.1126/science.aaa0946 ↗
53. Shokoohi S, Arefazar A, Khosrokhavar R (2008) Silane coupling agents in polymer-based reinforced composites: a review. J Reinf Plast Comp 27:473–485. https://doi.org/10.1177/073168440708139110.1177/0731684407081391 ↗
54. Xie Y, Hill CAS, Xiao Z, Militz H, Mai C (2010) Silane coupling agents used for natural fiber/polymer composites: a review. Compos Part A Appl Sci Manuf 41:806–819. https://doi.org/10.1016/j.compositesa.2010.03.00510.1016/j.compositesa.2010.03.005 ↗
55. Ahangaran F, Navarchian AH (2020) Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: a review. Adv Colloid Interface Sci 286:102298. https://doi.org/10.1016/j.cis.2020.10229810.1016/j.cis.2020.102298 ↗
56. Duong HP, Le MD, Dao HC, Chen C-Y (2017) Surface modification of TiO2 nanotubes by grafting with APTS coupling agents. Mater Res Express 4:105043. https://doi.org/10.1088/2053-1591/aa92b310.1088/2053-1591/aa92b3 ↗
57. Yang T, Sang S, Zhao X, Zhang Z, Rao H (2017) Surface modification of TiO2 nanoparticles and preparation of TiO2/PDMS hybrid membrane materials. Polym Comp 38:1541–1548. https://doi.org/10.1002/pc.2372110.1002/pc.23721 ↗
58. Plodinec M, Gajovic A, Ivekovic D, Tomasic N, Zimmermann B, Macan J, Haramina T, Su DS, Willinger M (2014) Study of thermal stability of (3-aminopropyl)trimethoxy silane-grafted titanate nanotubes for application as nanofillers in polymers. Nanotechnology 25:435601. https://doi.org/10.1088/0957-4484/25/43/43560110.1088/0957-4484/25/43/435601 ↗
59. Jeeva Jothi K, Palanivelu K (2016) Anti-corrosion coatings on SS 304 by incorporation of Pr6O11–TiO2 in siloxane network. Surf Eng Appl Electrochem 51:589–597. https://doi.org/10.3103/s106837551506008310.3103/s1068375515060083 ↗
60. Salehi M, Mozammel M, Emarati SM (2019) Superhydrophobic and corrosion resistant properties of electrodeposited Ni-TiO2/TMPSi nanocomposite coating. Colloids Surf A 573:196–204. https://doi.org/10.1016/j.colsurfa.2019.04.02410.1016/j.colsurfa.2019.04.024 ↗
61. Ahmad H, Fan M, Hui D (2018) Graphene oxide incorporated functional materials: a review. Compos B Eng 145:270–28010.1016/j.compositesb.2018.02.006 ↗
62. Wang Y, Li S, Yang H, Luo J (2020) Progress in the functional modification of graphene/graphene oxide: a review. RSC Adv 10:15328–1534510.1039/D0RA01068E ↗
63. Compton OC, Nguyen S (2010) Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon-based materials. Small 6:711–72310.1002/smll.200901934 ↗
64. Zhang S, Cheng B, Gao Z, Lan D, Zhao Z, Wei F, Zhu Q, Lu X, Wu G (2022) Two-dimensional nanomaterials for high-efficiency electromagnetic wave absorption: An overview of recent advances and prospects. J Alloys Compd 893:162343. https://doi.org/10.1016/j.jallcom.2021.16234310.1016/j.jallcom.2021.162343 ↗
65. Zhu Q, Huang Y, Li Y, Zhou M, Xu S, Liu X, Liu C, Yuan B, Guo Z (2021) Aluminum dihydric tripolyphosphate/polypyrrole-functionalized graphene oxide waterborne epoxy composite coatings for impermeability and corrosion protection performance of metals. Adv Compos Hybrid Mater 4:780–792. https://doi.org/10.1007/s42114-021-00265-610.1007/s42114-021-00265-6 ↗
66. Liu J, Yu Q, Yu M, Li S, Zhao K, Xue B, Zu H (2018) Silane modification of titanium dioxide-decorated graphene oxide nanocomposite for enhancing anticorrosion performance of epoxy coatings on AA-2024. J Alloys Compd 744:728–739. https://doi.org/10.1016/j.jallcom.2018.01.26710.1016/j.jallcom.2018.01.267 ↗
67. Li W, Song B, Zhang S, Zhang F, Liu C, Zhang N, Yao H, Shi Y (2020) Using 3-isocyanatopropyltrimethoxysilane to decorate graphene oxide with nano-titanium dioxide for enhancing the anti-corrosion properties of epoxy coating. Polymers (Basel) 12:837–850. https://doi.org/10.3390/polym1204083710.3390/polym12040837 ↗
68. Yuan H, Qi F, Zhao N, Wan P, Zhang B, Xiong H, Liao B, Ouyang X (2020) Graphene oxide decorated with titanium nanoparticles to reinforce the anti-corrosion performance of epoxy coating. Coatings 10:129–143. https://doi.org/10.3390/coatings1002012910.3390/coatings10020129 ↗
69. Ganjaee Sari M, Shamshiri M, Ramezanzadeh B (2017) Fabricating an epoxy composite coating with enhanced corrosion resistance through impregnation of functionalized graphene oxide-co-montmorillonite Nanoplatelet. Corros Sci 129:38–53. https://doi.org/10.1016/j.corsci.2017.09.02410.1016/j.corsci.2017.09.024 ↗
70. Ji W-G, Hu J-M, Liu L, Zhang J-Q, Cao C-N (2012) Enhancement of corrosion performance of epoxy coatings by chemical modification with GPTMS silane monomer. J Adhes Sci Technol 22:77–92. https://doi.org/10.1163/156856108x29228710.1163/156856108x292287 ↗
71. Sekhavat Pour Z, Ghaemy M, Bordbar S, Karimi-Maleh H (2018) Effects of surface treatment of TiO2 nanoparticles on the adhesion and anticorrosion properties of the epoxy coating on mild steel using electrochemical technique. Prog Org Coat 119:99–108. https://doi.org/10.1016/j.porgcoat.2018.02.01910.1016/j.porgcoat.2018.02.019 ↗
72. Joo M, Chiu T-M, Castaneda H, Soucek MD (2019) Corrosion resistance of alkoxysilane modified bisphenol A-epoxide coatings. Prog Org Coat 134:209–218. https://doi.org/10.1016/j.porgcoat.2019.05.00610.1016/j.porgcoat.2019.05.006 ↗
73. Wang J, Hu J, Zeng K, Yang G (2015) Preparation of self-promoted hydroxy-containing phthalonitrile resins by an in situ reaction. RSC Adv 5:10503810.1039/C5RA18472J ↗
74. Laskoski M, Dominguez DD, Keller TM (2007) Synthesis and properties of aromatic ether phosphine oxide containing oligomeric phthalonitrile resins with improved oxidative stability. Polymer 48:6234–624010.1016/j.polymer.2007.08.028 ↗
75. Derradji M, Wang J, Liu W-B (2018) Phthalonitrile resins’ properties. Wiliam Andrew Publishing, New York10.1016/B978-0-12-812966-1.00002-0 ↗
76. Derradji M, Ramdani N, Zhang T et al (2016) Effect of silane surface modified titania nanoparticles on the thermal, mechanical, and corrosion protective properties of a bisphenol-A based phthalonitrile resin. Prog Org Coat 90:34–43. https://doi.org/10.1016/j.porgcoat.2015.09.02110.1016/j.porgcoat.2015.09.021 ↗
77. Yu Y, Xiong S, Huang H, Zhao L, Wang L (2020) Fabrication and application of poly (phenylene sulfide) ultrafine fiber. React Funct Polym 150:10453910.1016/j.reactfunctpolym.2020.104539 ↗
78. Zuo P, Tcharkhtchi A, Shirinbayan M, Fitoussi J, Bakir F (2019) Overall investigation of PolyPhenylene Sulfide (PPS) from synthesis and process to applications—a review. Macromol Mater Eng 304:180068610.1002/mame.201800686 ↗
79. Lv C, Wang H, Liu Z, Wang C, Zhang W, Li M, Zhu Y (2019) Fabrication of durable fluorine-free polyphenylene sulfide/silicone resin composite superhydrophobic coating enhanced by carbon nanotubes/graphene fillers. Prog Org Coat 134:1–10. https://doi.org/10.1016/j.porgcoat.2019.04.04210.1016/j.porgcoat.2019.04.042 ↗
80. Lv C, Wang H, Liu Z, Wang C, Li H, Zhao Y, Zhu Y (2017) A fluorine-free superhydrophobic PPS composite coating with high thermal stability, wear resistance, corrosion resistance. Prog Org Coat 110:47–54. https://doi.org/10.1016/j.porgcoat.2017.04.04910.1016/j.porgcoat.2017.04.049 ↗
81. Xing J, Ni Q-Q, Deng B, Liu Q (2016) Morphology and properties of polyphenylene sulfide (PPS)/polyvinylidene fluoride (PVDF) polymer alloys by melt blending. Compos Sci Technol 134:184–190. https://doi.org/10.1016/j.compscitech.2016.08.02010.1016/j.compscitech.2016.08.020 ↗
82. Lv C, Wang H, Liu Z, Zhang W, Wang C, Tao R, Li M, Zhu Y (2018) A sturdy self-cleaning and anti-corrosion superhydrophobic coating assembled by amino silicon oil modifying potassium titanate whisker-silica particles. Appl Surf Sci 435:903–913. https://doi.org/10.1016/j.apsusc.2017.11.20510.1016/j.apsusc.2017.11.205 ↗
83. Li C, Sun Y, Cheng M, Sun S, Hu S (2018) Fabrication and characterization of a TiO2/polysiloxane resin composite coating with full-thickness super-hydrophobicity. Chem Eng J 333:361–369. https://doi.org/10.1016/j.cej.2017.09.16510.1016/j.cej.2017.09.165 ↗
84. Chen S, Cai Y, Zhuang C, Yu M, Song X, Zhang Y (2015) Electrochemical behavior and corrosion protection performance of bis-[triethoxysilylpropyl] tetrasulfide silane films modified with TiO2 sol on 304 stainless steel. Appl Surf Sci 331:315–326. https://doi.org/10.1016/j.apsusc.2015.01.00810.1016/j.apsusc.2015.01.008 ↗
85. Zhang Y, Zhu H, Zhuang C, Chen S, Wang L, Dong L, Yin Y (2016) TiO2 coated multi-wall carbon nanotube as a corrosion inhibitor for improving the corrosion resistance of BTESPT coatings. Mater Chem Phys 179:80–91. https://doi.org/10.1016/j.matchemphys.2016.05.01210.1016/j.matchemphys.2016.05.012 ↗
86. Cui L-Y, Qin P-H, Huang X-L, Yin Z-Z, Zeng R-C, Li S-Q, Han E-H, Wang Z-L (2017) Electrodeposition of TiO2 layer-by-layer assembled composite coating and silane treatment on Mg alloy for corrosion resistance. Surf Coat Technol 324:560–568. https://doi.org/10.1016/j.surfcoat.2017.06.01510.1016/j.surfcoat.2017.06.015 ↗
87. Ni H, Johnson AH, Soucek MD, Greant JT, Vreugdenhil AJ (2002) Polyurethane/polysiloxane ceramer coatings: evaluation of corrosion protection. Macromol Mater Eng 287:470–47910.1002/1439-2054(20020701)287:7<470::AID-MAME470>3.0.CO;2-D ↗
88. Soucek M, Hai N (2002) Nanostructured polyurethane ceramer coatings for aircraft. J Coat Technol 74:125–13410.1007/BF02697952 ↗
89. Wheat N (2005) Evolution of inorganic/organic hybrid systems for the protective coatings industry. J Protect Coat Linings 22:30–33
90. Balaji J, Sethuraman MG (2017) Chitosan-doped-hybrid/TiO2 nanocomposite based sol-gel coating for the corrosion resistance of aluminum metal in 3.5% NaCl medium. Int J Biol Macromol 104:1730–1739. https://doi.org/10.1016/j.ijbiomac.2017.03.11510.1016/j.ijbiomac.2017.03.115 ↗
91. Maya-Visuet E, Gao T, Soucek M, Castaneda H (2015) The effect of TiO2 as a pigment in a polyurethane/polysiloxane hybrid coating/aluminum interface based on damage evolution. Prog Org Coat 83:36–46. https://doi.org/10.1016/j.porgcoat.2015.02.00110.1016/j.porgcoat.2015.02.001 ↗
92. Staiger MP, Pietak AM, Huadmai J, Dias G (2006) Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 27:1728–1734. https://doi.org/10.1016/j.biomaterials.2005.10.00310.1016/j.biomaterials.2005.10.003 ↗
93. Cordoba LC, Helary C, Montemor F, Coradin T (2019) Bi-layered silane-TiO2/collagen coating to control biodegradation and biointegration of Mg alloys. Mater Sci Eng C Mater Biol Appl 94:126–138. https://doi.org/10.1016/j.msec.2018.09.03210.1016/j.msec.2018.09.032 ↗
94. Córdoba LC, Montemor MF, Coradin T (2016) Silane/TiO2 coating to control the corrosion rate of magnesium alloys in simulated body fluid. Corros Sci 104:152–161. https://doi.org/10.1016/j.corsci.2015.12.00610.1016/j.corsci.2015.12.006 ↗
95. Bell S, Steinberg T, Will G (2019) Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power. Renew Sust Energ Rev 114:109328. https://doi.org/10.1016/j.rser.2019.10932810.1016/j.rser.2019.109328 ↗
96. Gonzalez M, Nithiyanantham U, Carbó-Argibay E, Bondarchuk O, Grosu Y, Faik A (2019) Graphitization as efficient inhibitor of the carbon steel corrosion by molten binary nitrate salt for thermal energy storage at concentrated solar power. Sol Energy Mater Sol Cells 203:110172. https://doi.org/10.1016/j.solmat.2019.11017210.1016/j.solmat.2019.110172 ↗
97. Zhong H, Hu Y, Wang Y, Yang H (2017) TiO2/silane coupling agent composed of two layers structure: a super-hydrophilic self-cleaning coating applied in PV panels. Appl Energy 204:932–938. https://doi.org/10.1016/j.apenergy.2017.04.05710.1016/j.apenergy.2017.04.057 ↗
98. Mohd Zaini FK, Balakrishnan V, Syafiq A, Rahim NA, Pandey AK, Kasi R, Subramaniam R (2020) Synthesis of nano-TiO2 coating systems for solar cell. Pigm Resin Technol 49:26–32. https://doi.org/10.1108/prt-02-2019-001010.1108/prt-02-2019-0010 ↗
99. Fadl AM, Abdou MI, Hamza MA, Sadeek SA (2020) Corrosion-inhibiting, self-healing, mechanical-resistant, chemically and UV stable PDMAS/TiO2 epoxy hybrid nanocomposite coating for steel petroleum tanker trucks. Prog Org Coat 146:105715. https://doi.org/10.1016/j.porgcoat.2020.10571510.1016/j.porgcoat.2020.105715 ↗
100. Dall’Agnol L.T., Moura J.J.G. (2014) Sulphate-reducing bacteria (SRB) and biocorrosion. In: Liengen T, Féron D, Basséguy R, Beech IB (eds) Understanding biocorrosion. Woodhead Publishing Inc., England, pp 77–10610.1533/9781782421252.1.77 ↗