Influence of the oxidizing agent in the synthesis of graphite oxide
Source abstract
Abstract
The oxidation capacity of several procedures described in the literature which use different oxidizing agents has been exhaustively studied in order to describe the best route for oxidation of this material. The oxidation capacities of different types of materials were evaluated in the synthesis of graphite oxide in an effort to obtain a product with similar characteristics to those provided by commonly employed methods. The results obtained show that graphite oxide structures are greatly influenced by the nature of the oxidizing agent used. It was concluded that it is possible not only to establish the number of oxygenated groups attached to the structure but also, and depending on the oxidizing agent used, to know the stability of graphite oxide. The different characteristics of each graphite oxide obtained could facilitate their use in multiple applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphite, nuclear technology, radiation studies · Graphene research and applications · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. González CR, Kharissova OV (2008) Propiedades y aplicaciones del grafeno. Ingenierías 11:2
2. Allen MJ, Tung VC, Kaner RB (2010) Honeycomb carbon: a review of graphene. Chem Rev 110:13210.1021/cr900070d ↗
3. Lavin-Lopez M, Valverde J, Ordoñez-Lozoya S, Paton-Carrero A, Romero A (2019) Role of inert gas in the Cvd-graphene synthesis over polycrystalline nickel foils. Mater Chem Phys 222:173–18010.1016/j.matchemphys.2018.09.083 ↗
4. Riedl C, Coletti C, Starke U (2010) Structural and electronic properties of epitaxial graphene on SiC (0 0 0 1): a review of growth, characterization, transfer doping and hydrogen intercalation. J Phys D Appl Phys 43:37400910.1088/0022-3727/43/37/374009 ↗
5. Tour JM (2013) Top-down versus bottom-up fabrication of graphene-based electronics. Chem Mater 26:163–17110.1021/cm402179h ↗
6. Hernandez Y, Nicolosi V, Lotya M, Blighe FM, Sun Z, De S, McGovern I, Holland B, Byrne M, Gun’Ko YK (2008) High-yield production of graphene by liquid-phase exfoliation of graphite. Nat Nanotechnol 3:56310.1038/nnano.2008.215 ↗
7. Morozov S, Novoselov K, Geim A, Jiang D, Zhang Y, Dubonos S, Grigorieva I, Firsov A, Mussell J (2004) Electric field effect in atomically thin carbon films. Science (New York, NY). https://doi.org/10.1126/science.110289610.1126/science.1102896 ↗
8. Romero A, Lavin-Lopez M, Sanchez-Silva L, Valverde J, Paton-Carrero A (2018) Comparative study of different scalable routes to synthesize graphene oxide and reduced graphene oxide. Mater Chem Phys 203:284–29210.1016/j.matchemphys.2017.10.013 ↗
9. Dreyer DR, Park S, Bielawski CW, Ruoff RS (2010) The chemistry of graphene oxide. Chem Soc Rev 39:228–24010.1039/B917103G ↗
10. Lavin-Lopez MdP, Romero A, Garrido J, Sanchez-Silva L, Valverde JL (2016) Influence of different improved hummers method modifications on the characteristics of graphite oxide in order to make a more easily scalable method. Ind Eng Chem Res 55:12836–1284710.1021/acs.iecr.6b03533 ↗
11. Hummers WS Jr, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:133910.1021/ja01539a017 ↗
12. Staudenmaier L (1898) Verfahren zur darstellung der graphitsäure. Ber Dtsch Chem Ges 31:1481–148710.1002/cber.18980310237 ↗
13. Brodie BC (1859) On the atomic weight of graphite. Philos Trans R Soc Lond 149:249–25910.1098/rstl.1859.0013 ↗
14. Yu C, Wang C-F, Chen S (2016) Facile access to graphene oxide from ferro-induced oxidation. Sci Rep 6:1707110.1038/srep17071 ↗
15. Sofer Z, Luxa J, Jankovský O, Sedmidubský D, Bystroň T, Pumera M (2016) Synthesis of graphene oxide by oxidation of graphite with ferrate(VI) compounds: myth or reality? Angew Chem Int Ed 55:11965–1196910.1002/anie.201603496 ↗
16. Peng L, Xu Z, Liu Z, Wei Y, Sun H, Li Z, Zhao X, Gao C (2015) An iron-based green approach to 1-h production of single-layer graphene oxide. Nat Commun 6:571610.1038/ncomms6716 ↗
17. Wojtoniszak M, Mijowska E (2012) Controlled oxidation of graphite to graphene oxide with novel oxidants in a bulk scale. J Nanopart Res 14:124810.1007/s11051-012-1248-z ↗
18. Jankovský O, Kučková ŠH, Pumera M, Šimek P, Sedmidubský D, Sofer Z (2014) Carbon fragments are ripped off from graphite oxide sheets during their thermal reduction. New J Chem 38:5700–570510.1039/C4NJ00871E ↗
19. Dimiev AM, Tour JM (2014) Mechanism of graphene oxide formation. ACS Nano 8:3060–306810.1021/nn500606a ↗
20. Sorokina N, Khaskov M, Avdeev V, Nikol’Skaya I (2005) Reaction of graphite with sulfuric acid in the presence of KMnO4. Russ J Gen Chem 75:162–16810.1007/s11176-005-0191-4 ↗
21. Trömel M, Russ M (1987) Dimanganheptoxid zur selektiven Oxidation organischer Substrate. Angew Chem 99:1037–103810.1002/ange.19870991009 ↗
22. Zhang X, Deng C, Xu R, Wang D (2007) Oxidation resistance of multi-walled carbon nanotubes purified with sulfuric and nitric acids. J Mater Sci 42:8377–8380. https://doi.org/10.1007/s10853-007-1941-y10.1007/s10853-007-1941-y ↗
23. Kolthoff I, Miller I (1951) The chemistry of persulfate. I. The kinetics and mechanism of the decomposition of the persulfate ion in aqueous medium. J Am Chem Soc 73:3055–305910.1021/ja01151a024 ↗
24. Pérez J, Llanos J, Sáez C, López C, Cañizares P, Rodrigo M (2019) On the design of a jet-aerated microfluidic flow-through reactor for wastewater treatment by electro-Fenton. Sep Purif Technol 208:123–12910.1016/j.seppur.2018.04.021 ↗
25. Brillas E, Sirés I, Oturan MA (2009) Electro-Fenton process and related electrochemical technologies based on Fenton’s reaction chemistry. Chem Rev 109:6570–663110.1021/cr900136g ↗
26. Kudin KN, Ozbas B, Schniepp HC, Prud’Homme RK, Aksay IA, Car R (2008) Raman spectra of graphite oxide and functionalized graphene sheets. Nano Lett 8:36–4110.1021/nl071822y ↗
27. Lucchese MM, Stavale F, Ferreira EM, Vilani C, Moutinho M, Capaz RB, Achete C, Jorio A (2010) Quantifying ion-induced defects and Raman relaxation length in graphene. Carbon 48:1592–159710.1016/j.carbon.2009.12.057 ↗
28. Gao J, Liu F, Liu Y, Ma N, Wang Z, Zhang X (2010) Environment-friendly method to produce graphene that employs vitamin C and amino acid. Chem Mater 22:2213–221810.1021/cm902635j ↗
29. Wilson NR, Pandey PA, Beanland R, Young RJ, Kinloch IA, Gong L, Liu Z, Suenaga K, Rourke JP, York SJ (2009) Graphene oxide: structural analysis and application as a highly transparent support for electron microscopy. ACS Nano 3:2547–255610.1021/nn900694t ↗
30. Klimeš J, Bowler DR, Michaelides A (2009) Chemical accuracy for the van der Waals density functional. J Phys Condens Matter 22:02220110.1088/0953-8984/22/2/022201 ↗
31. Shao G, Lu Y, Wu F, Yang C, Zeng F, Wu Q (2012) Graphene oxide: the mechanisms of oxidation and exfoliation. J Mater Sci 47:4400–4409. https://doi.org/10.1007/s10853-012-6294-510.1007/s10853-012-6294-5 ↗
32. Alazmi A, Rasul S, Patole SP, Costa PM (2016) Comparative study of synthesis and reduction methods for graphene oxide. Polyhedron 116:153–16110.1016/j.poly.2016.04.044 ↗
33. Klein KL, Melechko AV, McKnight TE, Retterer ST, Rack PD, Fowlkes JD, Joy DC, Simpson ML (2008) Surface characterization and functionalization of carbon nanofibers. J Appl Phys 103:3
34. Johra FT, Lee J-W, Jung W-G (2014) Facile and safe graphene preparation on solution based platform. J Ind Eng Chem 20:2883–288710.1016/j.jiec.2013.11.022 ↗