Cellulose film with air barrier and moisture-conducting character fabricated by NMMO
Source abstract
Abstract
The use of natural polymer to prepare degradable films is a sustainable production concept that can improve resource utilization and reduce the environmental pollution caused by traditional packaging waste or another field. Here, a regenerated cellulose film was prepared through the N-methylmorpholine-N-oxide (NMMO) cellulose system. The most important advantage of the developed film is that it has air barrier and moisture conduction character, because the surface of films is dense and does not allow small molecules like oxygen to pass through, but water molecules can move freely in the film by means of hydrogen bonds. This shows that the cellulose film has applications in textiles, food preservation, medicine and other fields. Significantly, the film has good tensile strength (maximum strength reaches 149.5 MPa) and light transmittance (more than 80% at 600 nm). Moreover, the effect of coagulation bath concentration, temperature and the content of glycerin on film strength was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Raghuwanshi VS, Garnier G (2019) Cellulose nano-films as bio-interfaces. Front Chem 7:535. https://doi.org/10.3389/fchem.2019.0053510.3389/fchem.2019.00535 ↗
2. Alexandridis P, Ghasemi M, Furlani EP, Tsianou M (2018) Solvent processing of cellulose for effective bioresource utilization. Curr Opin Green Sustain Chem 14:40–52. https://doi.org/10.1016/j.cogsc.2018.05.00810.1016/j.cogsc.2018.05.008 ↗
3. Rabideau BD, Ismail AE (2015) Effect of water content in N-methylmorpholine N-oxide/cellulose solutions on thermodynamics, structure, and hydrogen bonding. J Phys Chem B 119(48):15014–15022. https://doi.org/10.1021/acs.jpcb.5b0750010.1021/acs.jpcb.5b07500 ↗
4. Mao Z, Cao Y, Jie X, Kang G, Zhou M, Yuan Q (2010) Dehydration of isopropanol–water mixtures using a novel cellulose membrane prepared from cellulose/N-methylmorpholine-N-oxide/H2O solution. Sep Purif Technol 72(1):28–33. https://doi.org/10.1016/j.seppur.2010.01.00210.1016/j.seppur.2010.01.002 ↗
5. Wei Y, Wu K, Liu N, Zhang Y, Wang H (2018) Cellulose acetate fibers with improved mechanical strength prepared with aqueous NMMO as solvent. Cellulose 25(11):6395–404. https://doi.org/10.1007/s10570-018-2032-810.1007/s10570-018-2032-8 ↗
6. Duan J, Liang X, Cao Y, Wang S, Zhang L (2015) High strength chitosan hydrogels with biocompatibility via new avenue based on constructing nanofibrous architecture. Macromolecules 48(8):2706. https://doi.org/10.1021/acs.macromol.5b0011710.1021/acs.macromol.5b00117 ↗
7. Trygg J, Fardim P (2011) Enhancement of cellulose dissolution in water-based solvent via ethanol–hydrochloric acid pretreatment. Cellulose 18(4):987–94. https://doi.org/10.1007/s10570-011-9550-y10.1007/s10570-011-9550-y ↗
8. Fukaya Y, Hayashi K, Wada M (2008) Cellulose dissolution with polar ionic liquids under mild conditions: required factors for anions. Green Chem 10(1):44–6. https://doi.org/10.1039/B713289A10.1039/B713289A ↗
9. Ahmed ASS, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6(2):612–26. https://doi.org/10.1021/bm049368510.1021/bm0493685 ↗
10. Heinze T, Koschella A (2005) Solvents applied in the field of cellulose chemistry: a mini review. Polímeros 15(2):84–90. https://doi.org/10.1590/S0104-1428200500020000510.1590/S0104-14282005000200005 ↗
11. Swatloski RP, Spear SK, Holbrey JD (2002) Dissolution of cellulose [correction of cellose] with ionic liquids. J Am Chem Soc 124(18):4974–5. https://doi.org/10.1021/ja025790m10.1021/ja025790m ↗
12. Matsumoto T, Tatsumi D, Tamai N, Takaki T (2001) Solution properties of celluloses from different biological origins in LiCl DMAc. Cellulose 8(4):275–82. https://doi.org/10.1023/A:101516202735010.1023/A:1015162027350 ↗
13. Heinze T, Dicke R, Koschella A, Henning Kull A, Klohr E-A, Koch W (2000) Effective preparation of cellulose derivatives in a new simple cellulose solvent %J macromolecular chemistry and physics. Macromol Chem Phys 201(6):627–31. https://doi.org/10.1002/(SICI)1521-3935(20000301)201:610.1002/(SICI)1521-3935(20000301)201:6 ↗
14. Xie W, Li T, Tiraferri A et al (2021) Toward the next generation of sustainable membranes from green chemistry principles. ACS Sustain Chem Eng 9(1):50–75. https://doi.org/10.1021/acssuschemeng.0c0711910.1021/acssuschemeng.0c07119 ↗
15. Nunes SP, Zeynep Culfaz-Emecen P, Ramon GZ et al (2020) Thinking the future of membranes: perspectives for advanced and new membrane materials and manufacturing processes. J Membr Sci 598:117761. https://doi.org/10.1016/j.memsci.2019.11776110.1016/j.memsci.2019.117761 ↗
16. Xu Z, Liao J, Tang H, Efome JE, Li N (2018) Preparation and antifouling property improvement of Tröger’s base polymer ultrafiltration membrane. J Membr Sci 561:59–68. https://doi.org/10.1016/j.memsci.2018.05.04210.1016/j.memsci.2018.05.042 ↗
17. Zhang Y, Tong X, Zhang B, Zhang C, Zhang H, Chen Y (2018) Enhanced permeation and antifouling performance of polyvinyl chloride (PVC) blend Pluronic F127 ultrafiltration membrane by using salt coagulation bath (SCB). J Membr Sci 548:32–41. https://doi.org/10.1016/j.memsci.2017.11.00310.1016/j.memsci.2017.11.003 ↗
18. Qi Y, Lin S, Lan J, Zhan Y, Guo J, Shang J (2021) Fabrication of super-high transparent cellulose films with multifunctional performances via postmodification strategy. Carbohydr Polym 260:117760. https://doi.org/10.1016/j.carbpol.2021.11776010.1016/j.carbpol.2021.117760 ↗
19. Wan J, Diao H, Yu J, Song G, Zhang J (2021) A biaxially stretched cellulose film prepared from ionic liquid solution. Carbohydr Polym 260:117816. https://doi.org/10.1016/j.carbpol.2021.11781610.1016/j.carbpol.2021.117816 ↗
20. Zhang Y, Tian Z, Fu Y, Wang Z, Qin M, Yuan Z (2020) Responsive and patterned cellulose nanocrystal films modified by N-methylmorpholine-N-oxide. Carbohydr Poly 228:115387. https://doi.org/10.1016/j.carbpol.2019.11538710.1016/j.carbpol.2019.115387 ↗
21. Zhang L, Zhou J, Zhang L (2013) Structure and properties of β-cyclodextrin/cellulose hydrogels prepared in NaOH/urea aqueous solution. Carbohydr Poly 94(1):386–393. https://doi.org/10.1016/j.carbpol.2012.12.07710.1016/j.carbpol.2012.12.077 ↗
22. Zheng B, Luo Y, Liao H, Zhang C (2017) Investigation of the crystallinity of suspension plasma sprayed hydroxyapatite coatings. Eur Ceram Soc 37(15):5017–5021. https://doi.org/10.1016/j.jeurceramsoc.2017.07.00710.1016/j.jeurceramsoc.2017.07.007 ↗
23. Yuping Z, Xiao C (2010) Discussion on crystallinity calculated by the technology of peak separation. Res Explor Lab 29(03):41–43
24. Sayyed AJ, Deshmukh NA, Pinjari DV (2019) A critical review of manufacturing processes used in regenerated cellulosic fibres: viscose, cellulose acetate, cuprammonium, LiCl/DMAc, ionic liquids, and NMMO based lyocell. Cellulose 26(5):2913–2940. https://doi.org/10.1007/s10570-019-02318-y10.1007/s10570-019-02318-y ↗
25. Cheng LP, Soh Y, Dwan AH, Gryte C (1994) An improved model for mass transfer during the formation of polymeric membranes by the immersion-precipitation process. J Poly Sci Part B: Poly Phys 32:1413–1425. https://doi.org/10.1002/polb.1994.09032081310.1002/polb.1994.090320813 ↗
26. Cheng L-P, Dwan A-H, Gryte CC (1995) Membrane formation by isothermal precipitation in polyamide-formic acid-water systems II. Precipitation dynamics. J Poly Sci Part B: Poly Phys 33(2):223–225. https://doi.org/10.1002/polb.1995.09033020710.1002/polb.1995.090330207 ↗
27. Ilyas A, Gebreyohannes AY, Qian J, Reynaerts D, Kuhn S, Vankelecom IFJ (2021) Micro-patterned membranes prepared via modified phase inversion: effect of modified interface on water fluxes and organic fouling. J Colloid Interface Sci 585:490–504. https://doi.org/10.1016/j.jcis.2020.10.03110.1016/j.jcis.2020.10.031 ↗
28. Reuvers AJ, van den Berg JWA, Smolders CA (1987) Formation of membranes by means of immersion precipitation: Part I. A model to describe mass transfer during immersion precipitation. J Membr Sci 34(1):45–65. https://doi.org/10.1016/S0376-7388(00)80020-410.1016/S0376-7388(00)80020-4 ↗
29. Reuvers AJ, Smolders CA (1987) Formation of membranes by means of immersion precipitation: Part II. the mechanism of formation of membranes prepared from the system cellulose acetate-acetone-water. J Membr Sci 34(1):67–86. https://doi.org/10.1016/S0376-7388(00)80021-610.1016/S0376-7388(00)80021-6 ↗
30. Shahbazi H, Tataei M, Enayati MH, Shafeiey A, Azizi Malekabadi M (2019) Structure-transmittance relationship in transparent ceramics. J Alloy Comp 785:260–285. https://doi.org/10.1016/j.jallcom.2019.01.12410.1016/j.jallcom.2019.01.124 ↗
31. Gobrecht A, Bendoula R, Roger J-M, Bellon-Maurel V (2015) Combining linear polarization spectroscopy and the representative layer theory to measure the beer-lambert law absorbance of highly scattering materials. Anal Chim Acta 853:486–494. https://doi.org/10.1016/j.aca.2014.10.01410.1016/j.aca.2014.10.014 ↗
32. Tang C, Liu H (2008) Cellulose nanofiber reinforced poly(vinyl alcohol) composite film with high visible light transmittance. Compos Part A: Appl Sci Manuf 39(10):1638–1643. https://doi.org/10.1016/j.compositesa.2008.07.00510.1016/j.compositesa.2008.07.005 ↗
33. Shandilya M, Thakur S, Thakur S (2020) Magnetic amendment in the fabrication of environment friendly and biodegradable iron oxide/ethyl cellulose nanocomposite membrane via electrospinning. Cellulose 27(17):10007–10017. https://doi.org/10.1007/s10570-020-03455-510.1007/s10570-020-03455-5 ↗
34. Zhang Y (2002) Dong Hua University,
35. van de Witte P, Dijkstra PJ, van den Berg JWA, Feijen J (1996) Phase separation processes in polymer solutions in relation to membrane formation. J Membr Sci 117(1):1–31. https://doi.org/10.1016/0376-7388(96)00088-910.1016/0376-7388(96)00088-9 ↗
36. Bang YH, Lee S, Park JB, Cho HH (1999) Effect of coagulation conditions on fine structure of regenerated cellulosic films made from cellulose/N-methylmorpholine-N-oxide/H2O systems. J Appl Polym Sci 73(13):2681–2690. https://doi.org/10.1002/(SICI)1097-4628(19990923)73:1310.1002/(SICI)1097-4628(19990923)73:13 ↗
37. Ichwan M, Son T-W (2012) Preparation and characterization of dense cellulose film for membrane application. J Appl Polym Sci 124(2):1409–1418. https://doi.org/10.1002/app.3510410.1002/app.35104 ↗
38. Laity PR, Glover PM, Hay JN (2002) Composition and phase changes observed by magnetic resonance imaging during non-solvent induced coagulation of cellulose. Polymer 43(22):5827–5837. https://doi.org/10.1016/S0032-3861(02)00531-110.1016/S0032-3861(02)00531-1 ↗
39. Lee S, Kim J, Lee C-H (1999) Analysis of CaSO4 scale formation mechanism in various nanofiltration modules. J Membr Sci 163(1):63–74. https://doi.org/10.1016/S0376-7388(99)00156-810.1016/S0376-7388(99)00156-8 ↗
40. Shi S, Zhu K, Chen X, Hu J, Zhang L (2019) Cross-linked cellulose membranes with robust mechanical property, self-adaptive breathability, and excellent biocompatibility. ACS Sustain Chem Eng 7(24):19799–19806. https://doi.org/10.1021/acssuschemeng.9b0509210.1021/acssuschemeng.9b05092 ↗
41. Duan Bo, Chang C, Na Zhang (2014) Structure and properties of films fabricated from chitin solution by coagulating with heating. J Appl Polym Sci. 131(4):1001–1007 https://doi.org/10.1002/app.3953810.1002/app.39538 ↗
42. Jianqing W, Li Z (2008) Preparation of cellulose films and mechanical properties by NMMO. J Tianjin Univ SciTechnol 23(04):9–13
43. Yaopeng Z, HuiliXinyuan SS, Xuechao H (2002) Morphology, permeation and cutoff properties of cellulose membranes prepared by NMMO method. Memb Sci Technol 22(4):13–20
44. Zheng X, Huang F, Chen L, Huang L, Cao S, Ma X (2019) Preparation of transparent film via cellulose regeneration: correlations between ionic liquid and film properties. Carbohy Poly 203:214–218. https://doi.org/10.1016/j.carbpol.2018.09.06010.1016/j.carbpol.2018.09.060 ↗
45. Yan C, Wang R, Wan J et al (2016) Cellulose/microalgae composite films prepared in ionic liquids. Algal Res 20:135–141. https://doi.org/10.1016/j.algal.2016.09.02410.1016/j.algal.2016.09.024 ↗
46. Pang J, Wu M, Zhang Q et al (2015) Comparison of physical properties of regenerated cellulose films fabricated with different cellulose feedstocks in ionic liquid. Carbohydr Poly 121:71–78. https://doi.org/10.1016/j.carbpol.2014.11.06710.1016/j.carbpol.2014.11.067 ↗
47. Qi H, Cai J, Zhang L, Kuga S (2009) Properties of films composed of cellulose nanowhiskers and a cellulose matrix regenerated from alkali/urea solution. Biomacromolecules 10:1597–1602. https://doi.org/10.1021/bm900197510.1021/bm9001975 ↗
48. Wang C, Shi J, He M et al (2018) High strength cellulose/ATT composite films with good oxygen barrier property for sustainable packaging applications. Cellulose 25(7):4145–4154. https://doi.org/10.1007/s10570-018-1855-710.1007/s10570-018-1855-7 ↗
49. Liu Y, Xu S, Jing M, Wei Y, Deng H, Fu Q (2019) Preparation of high-performance cellulose composite membranes from LiOH/urea solvent system. Nanocomposites 5(2):49–60. https://doi.org/10.1080/20550324.2019.161996210.1080/20550324.2019.1619962 ↗
50. Khare VP, Greenberg AR, Kelley SS, Pilath H, Juhn Roh I, Tyber J (2007) Synthesis and characterization of dense and porous cellulose films. J Appl Polym Sci. 105(3):1228–1236. https://doi.org/10.1002/app.2588810.1002/app.25888 ↗
51. Kim C-J, Khan W, Kim D-H, Cho K-S, Park S-Y (2011) Graphene oxide/cellulose composite using NMMO monohydrate. Carbohydr Polym 86(2):903–909. https://doi.org/10.1016/j.carbpol.2011.05.04110.1016/j.carbpol.2011.05.041 ↗
52. Niu X, Huan S, Li H, Pan H, Rojas OJ (2021) Transparent films by ionic liquid welding of cellulose nanofibers and polylactide: enhanced biodegradability in marine environments. J Hazard Mater 402:124073. https://doi.org/10.1016/j.jhazmat.2020.12407310.1016/j.jhazmat.2020.124073 ↗
53. Wang Y, Yuan L, Tian H, Zhang L, Lu A (2019) Strong, transparent cellulose film as gas barrier constructed via water evaporation induced dense packing. J Membr Sci 585:99–108. https://doi.org/10.1016/j.memsci.2019.04.05910.1016/j.memsci.2019.04.059 ↗
54. Li R, Zhang L, Xu M (2012) Novel regenerated cellulose films prepared by coagulating with water: structure and properties. Carbohydr Polym 87(1):95–100. https://doi.org/10.1016/j.carbpol.2011.07.02310.1016/j.carbpol.2011.07.023 ↗
55. Zhu K, Shi S, Cao Y, Lu A, Hu J, Zhang L (2019) Robust chitin films with good biocompatibility and breathable properties. Carbohydr Polym 212:361–367. https://doi.org/10.1016/j.carbpol.2019.02.05410.1016/j.carbpol.2019.02.054 ↗
56. Yue Y, Gong X, Jiao W et al (2021) In-situ electrospinning of thymol-loaded polyurethane fibrous membranes for waterproof, breathable, and antibacterial wound dressing application. J Colloid Interface Sci 592:310–318. https://doi.org/10.1016/j.jcis.2021.02.04810.1016/j.jcis.2021.02.048 ↗
57. Patil PP, Reagan MR, Bohara RA (2020) Silk fibroin and silk-based biomaterial derivatives for ideal wound dressings. Int J Biol Macromol 164:4613. https://doi.org/10.1016/j.ijbiomac.2020.08.04110.1016/j.ijbiomac.2020.08.041 ↗
58. Hu J, Mondal S (2006) In: Mattila HR (ed) Intelligent Textiles and ClothingWoodhead Publishing, 9 - Study of shape memory polymer films for breathable textiles, 143–164, https://doi.org/10.1533/9781845691622.2.143.10.1533/9781845691622.2.143. ↗
59. Tehrani-Bagha AR (2019) Waterproof breathable layers – A review. Adv Colloid Interface Sci 268:114–135. https://doi.org/10.1016/j.cis.2019.03.00610.1016/j.cis.2019.03.006 ↗
60. Zhou Z, Ma J, Li K et al (2021) A plant leaf-mimetic membrane with controllable gas permeation for efficient preservation of perishable products. ACS Nano 15(5):8742-8752. https://doi.org/10.1021/acsnano.1c0099710.1021/acsnano.1c00997 ↗