Dynamic precipitation, dynamic recrystallization behavior, and microstructure evolution of the Mg–8.7Gd–4.18Y–0.42Zr alloy during hot deformation
Source abstract
Abstract
Mg–8.7Gd–4.18Y–0.42Zr magnesium alloys are subjected to hot compressive tests at a strain rate of 0.002–2 s−1 and a compression temperature of 300–450 °C. Compared with strain rate, compression temperature appears to have a greater impact on dynamic precipitation. By virtue of the pinning effect, precipitates located immediately adjacent to the dynamic recrystallized (DRX) grain boundaries may greatly affect grain growth. As the compression temperature increases, DRX grains multiply rapidly. Nevertheless, the number of DRX grains is decreased owing to the increase in strain rate. However, further increasing the strain rate to 2 s−1, the increased energy stored generates stronger driving forces, causing dislocations to move, thereby raising the number of DRX grains by a considerable amount. With an increase in compression temperature and a decrease in strain rate, substructure development has been described as high-density dislocation → VLAGBs (sub-GBs) → LAGBs → HAGBs → DRX grains. It is DRX that is responsible for the predominant softening mechanism in this studied alloy, accompanied by a continuous dynamic recrystallization (CDRX) process characterized by transforming low-angle grain boundaries into high-angle grain boundaries, as well as discontinuous dynamic recrystallization (DDRX), which is characterized by bulging grain boundaries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Kulekci MK (2007) Magnesium and its alloys applications in the automotive industry. Int J Adv Manuf Technol 39:851–865. https://doi.org/10.1007/s00170-007-1279-210.1007/s00170-007-1279-2 ↗
2. You SH, Huang YD, Kainer KU, Hort N (2017) Recent research and developments on wrought magnesium alloys. J Magnes Alloy 5:239–253. https://doi.org/10.1016/j.jma.2017.09.00110.1016/j.jma.2017.09.001 ↗
3. Javaid A, Czerwinski F (2021) Progress in twin roll casting of magnesium alloys: A review. J Magnes Alloy. https://doi.org/10.1016/j.jma.2020.10.00310.1016/j.jma.2020.10.003 ↗
4. Zhang F, Wang YF, Duan YB, Wang KJ, Wang YT, Zhang WJ, Hu J (2019) Precipitation processes during the peak-aged and over-aged stages in an Mg-Gd-Y-Zr alloy. J Alloys Compd 788:541–548. https://doi.org/10.1016/j.jallcom.2019.02.20310.1016/j.jallcom.2019.02.203 ↗
5. Xia XS, Chen Q, Li JP, Shu DY, Hu CK, Huang SH, Zhao ZD (2014) Characterization of hot deformation behavior of as-extruded Mg–Gd–Y–Zn–Zr alloy. J Alloys Compd 610:203–211. https://doi.org/10.1016/j.jallcom.2014.04.21010.1016/j.jallcom.2014.04.210 ↗
6. Chen ZB, Liu CM, Xiao HC, Wang JK, Chen ZY, Jiang SN, Su ZJ (2014) Effect of rolling passes on the microstructures and mechanical properties of Mg–Gd–Y–Zr alloy sheets. Mater Sci Eng A 618:232–237. https://doi.org/10.1016/j.msea.2014.09.01810.1016/j.msea.2014.09.018 ↗
7. Alizadeh R, Mahmudi R, Ngan AHW, Huang Y, Langdon TG (2016) Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion. Mater Sci Eng A 651:786–794. https://doi.org/10.1016/j.msea.2015.10.09410.1016/j.msea.2015.10.094 ↗
8. Peng T, Wang QD, Lin JB, Liu MP, Roven HJ (2011) Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression. Mater Sci Eng A 528:1143–1148. https://doi.org/10.1016/j.msea.2010.09.09710.1016/j.msea.2010.09.097 ↗
9. Jiang R, Qian SN, Dong C, Qin Y, Wu YJ, Zou JX, Zeng XQ (2021) Composition optimization of high-strength Mg-Gd-Y-Zr alloys are based on the structural unit of Mg-Gd solid solution. J Mater Sci Technol 72:104–113. https://doi.org/10.1016/j.jmst.2020.08.04110.1016/j.jmst.2020.08.041 ↗
10. Minárik P, Zemková M, Veselý J, Bohlen J, Knapek M, Král R (2021) The effect of Zr on dynamic recrystallization during ECAP processing of Mg-Y-RE alloys. Mater Charact 174:111033. https://doi.org/10.1016/j.matchar.2021.11103310.1016/j.matchar.2021.111033 ↗
11. Yao Y, Liu CM, Wan YC, Yu SL, Gao YH, Jiang SN (2020) Microstructure, texture and mechanical anisotropy of Mg-Gd-Y-Zr sheets processed via different rolling routes and reductions. Mater Charact 161:110120. https://doi.org/10.1016/j.matchar.2020.11012010.1016/j.matchar.2020.110120 ↗
12. Chaudry UM, Kim TH, Kim YS, Hamad K, Ko YG, Kim JG (2019) Dynamic recrystallization behavior of AZ31-0.5 Ca magnesium alloy during warm rolling. Mater Sci Eng A 762:13808510.1016/j.msea.2019.138085 ↗
13. Huang YX, Wang YB, Meng XC, Wan L, Cao J, Zhou L, Feng JC (2017) Dynamic recrystallization and mechanical properties of friction stir processed Mg-Zn-Y-Zr alloys. J Mater Process Technol 249:331–338. https://doi.org/10.1016/j.jmatprotec.2017.06.02110.1016/j.jmatprotec.2017.06.021 ↗
14. Alizadeh R, Mahmudi R, Pereira PHR, Huang Y, Langdon TG (2017) Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques. Mater Sci Eng A 682:577–585. https://doi.org/10.1016/j.msea.2016.11.08010.1016/j.msea.2016.11.080 ↗
15. Wu Y, Kou HC, Wu ZH, Tang B, Li JS (2018) Dynamic recrystallization and texture evolution of Ti-22Al-25Nb alloy during plane-strain compression. J Alloys Compd 749:844–852. https://doi.org/10.1016/j.jallcom.2018.03.37210.1016/j.jallcom.2018.03.372 ↗
16. Yang Z, Guo YC, Li JP, He F, Xia F, Liang MX (2008) Plastic deformation and dynamic recrystallization behaviors of Mg–5Gd–4Y–0.5Zn–0.5Zr alloy. Mater Sci Eng A 485:487–491. https://doi.org/10.1016/j.msea.2007.08.06910.1016/j.msea.2007.08.069 ↗
17. Zhou H, Wang QD, Ye B, Guo W (2013) Hot deformation and processing maps of as-extruded Mg–9.8Gd–2.7Y–0.4Zr Mg alloy. Mater Sci Eng A 576:101–107. https://doi.org/10.1016/j.msea.2013.03.09010.1016/j.msea.2013.03.090 ↗
18. Xia XS, Chen Q, Zhang K, Zhao ZD, Ma ML, Li XG, Li YJ (2013) Hot deformation behavior and processing map of coarse-grained Mg–Gd–Y–Nd–Zr alloy. Mater Sci Eng A 587:283–290. https://doi.org/10.1016/j.msea.2013.08.06610.1016/j.msea.2013.08.066 ↗
19. Xiao HC, Tang B, Liu CM, Gao YH, Yu SL, Jiang SN (2015) Dynamic precipitation in a Mg–Gd–Y–Zr alloy during hot compression. Mater Sci Eng A 645:241–247. https://doi.org/10.1016/j.msea.2015.08.02210.1016/j.msea.2015.08.022 ↗
20. Lu SH, Wu D, Chen RS, Han EH (2019) The effect of twinning on dynamic recrystallization behavior of Mg-Gd-Y alloy during hot compression. J Alloys Compd 803:277–290. https://doi.org/10.1016/j.jallcom.2019.06.27910.1016/j.jallcom.2019.06.279 ↗
21. Li JL, Zhang N, Wang XX, Wu D, Chen RS (2018) Effect of Solution Treatment on the Microstructure and Mechanical Properties of Sand-Cast Mg–9Gd–4Y–0.5Zr Alloy. Acta Metall Sin Engl Lett 31:189–198. https://doi.org/10.1007/s40195-017-0591-610.1007/s40195-017-0591-6 ↗
22. Lu SH, Wu D, Chen RS, Han EH (2020) Reasonable utilization of 10–12 twin for optimizing microstructure and improving mechanical property in a Mg-Gd-Y alloy. Mater Des 191:108600. https://doi.org/10.1016/j.matdes.2020.10860010.1016/j.matdes.2020.108600 ↗
23. Cai ZW, Chen FX, Guo JQ (2015) Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strain. J Alloys Compd 648:215–222. https://doi.org/10.1016/j.jallcom.2015.06.25710.1016/j.jallcom.2015.06.257 ↗
24. Sasaki TT, Yamamoto K, Honma T, Kamado S, Hono K (2008) A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature. Scr Mater 59:1111–1114. https://doi.org/10.1016/j.scriptamat.2008.07.04210.1016/j.scriptamat.2008.07.042 ↗
25. Liang SQ, Guan DK, Tan XP, Chen L, Tang Y (2011) Effect of isothermal aging on the microstructure and properties of as-cast Mg–Gd–Y–Zr alloy. Mater Sci Eng A 528:1589–1595. https://doi.org/10.1016/j.msea.2010.10.08210.1016/j.msea.2010.10.082 ↗
26. Guan DK, Nutter J, Sharp J, Gao JH, MarkRainforth W (2017) Direct observation of precipitation along twin boundaries and dissolution in a magnesium alloy annealing at high temperature. Scr Mater 138:39–43. https://doi.org/10.1016/j.scriptamat.2017.05.01510.1016/j.scriptamat.2017.05.015 ↗
27. Xu SW, Matsumoto N, Kamado S, Honma T, Kojima Y (2009) Dynamic microstructural changes in Mg–9Al–1Zn alloy during hot compression. Scr Mater 61:249–252. https://doi.org/10.1016/j.scriptamat.2009.03.05110.1016/j.scriptamat.2009.03.051 ↗
28. Zhang Q, Li Q, Chen XY, Zhao JX, Bao J, Chen ZY (2021) Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy. J Mater Res Technol 15:37–51. https://doi.org/10.1016/j.jmrt.2021.08.01310.1016/j.jmrt.2021.08.013 ↗
29. Humphreys FJ, Hatherly M (2004) Recrystallization and Related Annealing Phenomena 2nd ed. Elsevier Oxford https://doi.org/10.1016/B978-0-08-098235-9.00006-9.10.1016/B978-0-08-098235-9.00006-9 ↗
30. Xu SW, Matsumoto N, Kamado S, Honma T, Kojima Y (2009) Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy. Mater Sci Eng A 523:47–52. https://doi.org/10.1016/j.msea.2009.05.03210.1016/j.msea.2009.05.032 ↗
31. Yang Y, Wang Z, Jiang LH (2017) Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation. J Alloys Compd 705:566–571. https://doi.org/10.1016/j.jallcom.2017.02.15810.1016/j.jallcom.2017.02.158 ↗
32. Zhang JY, Peng P, Luo AA, She J, Tang AT, Pan FS (2022) Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion. Mater Sci Eng A 829:142–143. https://doi.org/10.1016/j.msea.2021.14214310.1016/j.msea.2021.142143 ↗
33. Hort N, Huang YD, Kainer KU (2006) Intermetallics in Magnesium Alloys. Adv Eng Mater 4:235–24010.1002/adem.200500202 ↗
34. Li YP, Suzuki T, Tang N, Koizum Y, Chiba A (2013) Microstructure evolution of SUS303 free-cutting steel during hot compression process. Mater Sci Eng A 583:161–168. https://doi.org/10.1016/j.msea.2013.06.06910.1016/j.msea.2013.06.069 ↗
35. Biswas S, Beausir B, Toth LS, Suwas S (2013) Evolution of texture and microstructure during hot torsion of a magnesium alloy. Acta Mater 61:5263–5277. https://doi.org/10.1016/j.actamat.2013.05.01810.1016/j.actamat.2013.05.018 ↗
36. Jin L, Lin DL, Mao DL, Zeng XQ, Chen B, Ding WJ (2006) Microstructure evolution of AZ31 Mg alloy during equal channel angular extrusion. Mater Sci Eng A 423:247–252. https://doi.org/10.1016/j.msea.2006.02.04510.1016/j.msea.2006.02.045 ↗
37. Qin DH, Wang MJ, Sun CY, Su ZX, Qian LY, Sun ZH (2020) Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2020.13953710.1016/j.msea.2020.139537 ↗
38. Gui YW, Ouyang LX, Cui YJ, Bian HK, Li QN, Chiba A (2021) Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg–9.80Gd–3.78Y–1.12Sm–0.48Zr alloy. J Magnes Alloy 9:456–466. https://doi.org/10.1016/j.jma.2020.06.00110.1016/j.jma.2020.06.001 ↗
39. Zhang H, Yang MX, Hou MJ, Wang LF, Zhang Q, Fan JF, Li WG, Dong HB et al (2019) Effect of pre-existing 10 1 2 extension twins on mechanical properties, microstructure evolution and dynamic recrystallization of AZ31 Mg alloy during uniaxial compression. Mater Sci Eng A 744:456–470. https://doi.org/10.1016/j.msea.2018.11.14610.1016/j.msea.2018.11.146 ↗
40. Wang MJ, Sun CY, Fu MW, Liu ZL, Qian LY (2020) Study on the dynamic recrystallization mechanisms of Inconel 740 superalloy during hot deformation. J Alloys Compd 820:153325. https://doi.org/10.1016/j.jallcom.2019.15332510.1016/j.jallcom.2019.153325 ↗
41. Wilsdorf DK, Hansen N (1991) Geometrically necessary, incidental and subgrain boundaries. Scr Metall Mater 25:1557–1562. https://doi.org/10.1016/0956-716X(91)90451-610.1016/0956-716X(91)90451-6 ↗
42. Wang X, Brünger E, Gottstein G (2000) Microstructure characterization and dynamic recrystallization in an Alloy 800H. Mater Sci Eng A 290:180–185. https://doi.org/10.1016/S0921-5093(00)00915-110.1016/S0921-5093(00)00915-1 ↗
43. Yamanaka K, Mori M, Kurosu S, Matsumoto H, Chiba A (2009) Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation. Metall Mater Trans A 40(8):1980–199410.1007/s11661-009-9879-0 ↗
44. Kamaya M, Kawamura Y, Kitamura T (2007) Three-dimensional local stress analysis on grain boundaries in polycrystalline material. Int J Solids Struct 44:3267–3277. https://doi.org/10.1016/j.ijsolstr.2006.09.02010.1016/j.ijsolstr.2006.09.020 ↗
45. Mandal S, Sivaprasad PV, Dube RK (2007) Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr–15Ni–2.2Mo–Ti modified austenitic stainless steel. J Mater Sci 42:2724–2734. https://doi.org/10.1007/s10853-006-1275-110.1007/s10853-006-1275-1 ↗
46. Li L, Luo J, Yan JJ, Li MQ (2015) Dynamic globularization and restoration mechanism of Ti–5Al–2Sn–2Zr–4Mo–4Cr alloy during isothermal compression. J Alloys Compd 622:174–183. https://doi.org/10.1016/j.jallcom.2014.10.04310.1016/j.jallcom.2014.10.043 ↗
47. Ponge D, Gottstein G (1998) Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior. Acta Mater 46:69–80. https://doi.org/10.1016/S1359-6454(97)00233-410.1016/S1359-6454(97)00233-4 ↗
48. Lin YC, Wu XY, Chen XM, Chen J, Wen DX, Zhang JL, Li LT (2015) EBSD study of a hot deformed nickel-based superalloy. J Alloys Compd 640:101–113. https://doi.org/10.1016/j.jallcom.2015.04.00810.1016/j.jallcom.2015.04.008 ↗
49. Wang Y, Shao WZ, Zhen L, Yang L, Zhang XM (2008) Flow behavior and microstructures of superalloy 718 during high temperature deformation. Mater Sci Eng A 497:479–486. https://doi.org/10.1016/j.msea.2008.07.04610.1016/j.msea.2008.07.046 ↗
50. Samman TA, Gottstein G (2008) Influence of strain path change on the rolling behavior of twin roll cast magnesium alloy. Scr Mater 59:760–763. https://doi.org/10.1016/j.scriptamat.2008.06.02310.1016/j.scriptamat.2008.06.023 ↗
51. Huang K, Logé RE (2016) A review of dynamic recrystallization phenomena in metallic materials. Mater Des 111:548–574. https://doi.org/10.1016/j.matdes.2016.09.01210.1016/j.matdes.2016.09.012 ↗
52. Momeni A, Dehghani K, Ebrahimi GR (2011) Modeling the initiation of dynamic recrystallization using a dynamic recovery model. J Alloys Compd 509:9387–9393. https://doi.org/10.1016/j.jallcom.2011.07.01410.1016/j.jallcom.2011.07.014 ↗
53. Momeni A, Ebrahimi GR, Jahazi M, Bocher P (2014) Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size. J Alloys Compd 587:199–210. https://doi.org/10.1016/j.jallcom.2013.10.18010.1016/j.jallcom.2013.10.180 ↗
54. Ding R, Guo ZX (2001) Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta mater 49:3163–3175. https://doi.org/10.1016/S1359-6454(01)00233-610.1016/S1359-6454(01)00233-6 ↗
55. Li DF, Guo QM, Guo SL, Peng HJ, Wu ZG (2011) The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy. Mater Des 32:696–705. https://doi.org/10.1016/j.matdes.2010.07.04010.1016/j.matdes.2010.07.040 ↗
56. Yin BQ, Xue XY, Tang B, Wang Y, Kou HC, Li JS (2020) Hot deformation behaviors of WE71 alloy under plain strain compression at elevated temperature. Prog Nat Sci 30:526–532. https://doi.org/10.1016/j.pnsc.2020.08.00710.1016/j.pnsc.2020.08.007 ↗
57. Yang XY, Sanada M, Miura H, Sakai T (2005) Effect of initial grain size on deformation behavior and dynamic recrystallization of magnesium alloy AZ31. Mater Sci Forum 488:223–226. https://doi.org/10.4028/www.scientific.net/MSF.488-489.22310.4028/www.scientific.net/MSF.488-489.223 ↗