Modification of the thermal stability of doped CeO2–ZrO2 mixed oxides with the addition of triethylamine and its application as a Pd-only three-way catalyst
Source abstract
Abstract
In the present paper, triethylamine-assisted (CZS) and reference (CZ)-doped CeO2–ZrO2 mixed oxides were prepared by co-precipitation. The prepared samples were characterized by N2 adsorption–desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM and HRTEM), powder X-ray diffraction (XRD), Raman spectroscopy, and H2 temperature-programmed reduction (TPR). The results showed an improved thermal stability of CZS in textural properties with surface area of 32 and 12 m2 g−1 after aging at 1000 and 1100 °C for 10 h, respectively. Investigation of the sintering behavior disclosed that the sintering of crystallites during high-temperature thermal aging might be related to the packing mode of the grains, since the looser structure of CZS compared to that of CZ hindered the grain growth at high-temperature calcination. The results of XRD and Raman revealed identical structural properties for both materials which suggested a cubic phase in fresh samples and a mixture of cubic and tetragonal phases after thermal aging at severe high temperatures (1000 and 1100 °C). The TPR results showed reduction peaks with rather low-temperatures, which was 414 °C after thermal aging at 1000 °C and 367, 577 °C at 1100 °C. This suggested a high thermal stability of CZS in reduction property. Consequently, the high thermal stability of the mixed oxide in both textural and reduction properties would contribute to the stability of the catalytic activity of the Pd-only three-way catalyst after high-temperature thermal aging, that is, Pd/CZS-a exhibits conversion temperatures of the pollutants (T50 and T90) 10–20 °C lower than Pd/CZ-a.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Kašpar J, Fornasiero P, Grazinai M (1999) Use of CeO2-based oxides in the three-way catalysis. Catal Today 50:285–29810.1016/S0920-5861(98)00510-0 ↗
2. Di Monte R, Kašpar J (2005) Nanostructured CeO2–ZrO2 mixed oxides. J Mater Chem 15:633–64810.1039/B414244F ↗
3. Shinjoh H (2006) Rare earth metals for automotive exhaust catalysts. J. Alloys Compd. 408–412:1061–106410.1016/j.jallcom.2004.12.151 ↗
4. Ozawa M (1998) Role of cerium-zirconium mixed oxides as catalysts for car pollution: a short review. J. Alloys Compd. 275–277:886–89010.1016/S0925-8388(98)00477-0 ↗
5. Di Monte R, Kašpar J (2004) On the role of oxygen storage in three-way catalysis. Top Catal 28:47–5710.1023/B:TOCA.0000024333.08447.f7 ↗
6. Kašpar J, Fornasiero P, Hickey N (2003) Automotive catalytic converters: current status and some perspectives. Catal Today 77:419–44910.1016/S0920-5861(02)00384-X ↗
7. Di Monte R, Kašpar J (2005) Heterogeneous environmental catalysis-a gentle art: CeO2–ZrO2 mixed oxides as a case history. Catal Today 100:27–3510.1016/j.cattod.2004.11.005 ↗
8. Di Monte R, Kašpar J, Bradshaw H, Norman C (2008) A rationale for the development of thermally stable nanostructured CeO2–ZrO2-containing mixed oxides. J Rare Earths 26:136–14010.1016/S1002-0721(08)60053-8 ↗
9. Fornasiero P, Balducci G, Di Monte R, Kašpar J, Sergo V, Gubitosa G, Ferrero A, Graziani M (1996) Modification of the redox behaviour of CeO2 induced by structural doping with ZrO2. J Catal 164:173–18310.1006/jcat.1996.0373 ↗
10. Weng X, Perston B, Wang XZ, Abrahams I, Lin T, Yang S, Evans JRG, Morgan DJ, Carley AF, Bowker M, Knowles JC, Rehman I, Darr JA (2009) Synthesis and characterization of doped nano-sized ceria–zirconia solid solutions. Appl Catal B 90:405–41510.1016/j.apcatb.2009.03.031 ↗
11. Aneggi E, Boaro M, Leitenburg CD, Dolcetti G, Trovarelli A (2006) Insights into the redox properties of ceria-based oxides and their implications in catalysis. J. Alloys Compd. 408–412:1096–110210.1016/j.jallcom.2004.12.113 ↗
12. Yang X, Yang L, Lin S, Zhou R (2015) Investigation on properties of Pd/CeO2–ZrO2–Pr2O3 catalysts with different Ce/Zr molar ratios and its application for automotive emission control. J Hazard Mater 285:182–18910.1016/j.jhazmat.2014.10.062 ↗
13. Wang Q, Li G, Zhao B, Zhou R (2011) The effect of rare earth modification on ceria–zirconia solid solution and its application in Pd-only three-way catalyst. J. Mol. Catal. A 339:52–6010.1016/j.molcata.2011.02.011 ↗
14. Li G, Wang Q, Zhao B, Zhou R (2012) A new insight into the role of transition metals doping with CeO2–ZrO2 and its application in Pd-only three-way catalysts for automotive emission control. Fuel 92:360–36810.1016/j.fuel.2011.07.028 ↗
15. Lin S, Yang L, Yang X, Zhou R (2014) Redox behavior of active PdOx species on (Ce, Zr) x O2–Al2O3 mixed oxides and its influence on the three-way catalytic performance. Chem Eng J 247:42–4910.1016/j.cej.2014.03.015 ↗
16. Suda A, Yamamura K, Morikawa A, Nagai Y, Sobukawa H, Ukyo Y, Shinjo H (2008) Atmospheric pressure solvothermal synthesis of ceria–zirconia solid solutions and their large oxygen storage capacity. J Mater Sci 43:2258–226210.1007/s10853-007-2111-y ↗
17. Deshpande AS, Pinna N, Beato P, Antonietti M, Niederberger M (2004) Synthesis and characterization of stable and crystalline Ce1−x Zr x O2 nanoparticle sols. Chem Mater 16:2599–260410.1021/cm040155w ↗
18. Huang W, Yang J, Wang C, Zou B, Meng X, Wang Y, Cao X, Wang Z (2012) Effects of Zr/Ce molar ratio and water content on thermal stability and structure of ZrO2–CeO2 mixed oxides prepared via sol-gel process. Mater Res Bull 47:2349–235610.1016/j.materresbull.2012.05.025 ↗
19. Liu J, Liu B, Fang Y, Zhao Z, Wei Y, Gong XQ, Xu C, Duan A, Jiang G (2014) Preparation, characterization and origin of highly active and thermally stable Pd-Ce0.8Zr0.2O2 catalysts via sol-evaporation induced self-assembly method. Environ Sci Technol 48:12403–1241010.1021/es5027008 ↗
20. Bumajdad A, Zaki MI, Eastoe J, Pasupulety L (2004) Microemulsion-based synthesis of CeO2 powders with high surface area and high-temperature stabilities. Langmuir 20:11223–1123310.1021/la040079b ↗
21. Si R, Zhang YW, Li SJ, Lin BX, Yan CH (2004) Urea-based hydrothermally derived homogeneous nanostructured Ce1−x Zr x O2 (x = 0–0.8) solid solutions: a strong correlation between oxygen storage capacity and lattice strain. J. Phys. Chem. B 108:12481–1248810.1021/jp048084b ↗
22. Terribile D, Trovarelli A, Llorca J, de Leitenburg C, Dolcetti G (1998) The preparation of high surface area CeO2–ZrO2 mixed oxides by a surfactant-assisted approach. Catal Today 43:79–8810.1016/S0920-5861(98)00136-9 ↗
23. Terribile D, Trovarelli A, Llorca J, de Leitenburg C, Dolcetti G (1998) The synthesis and characterization of mesoporous high-surface area ceria prepared using a hybrid organic/inorganic route. J Catal 178:299–30810.1006/jcat.1998.2152 ↗
24. Hung IM, Wang HP, Lai WH, Fung KZ, Hon MH (2004) Preparation of mesoporous cerium oxide templated by tri-block copolymer for solid oxide fuel cell. Electrochim Acta 50:745–74810.1016/j.electacta.2004.03.059 ↗
25. Hosokawa S, Iwamoto S, Inoue M (2008) Synthesis of nanocrystalline rare earth oxides by glycothermal method. Mater Res Bull 43:3140–314810.1016/j.materresbull.2007.11.002 ↗
26. Shigapov AN, Graham GW, McCabe RW, Plummer HK Jr (2001) The preparation of high-surface area, thermally-stable, metal-oxide catalysts and supports by a cellulose templating approach. Appl Catal A 210:287–30010.1016/S0926-860X(00)00820-6 ↗
27. Weng X, Zhang J, Wu Z, Liu Y, Wang H, Darr JA (2011) Continuous syntheses of highly dispersed composite nanocatalysts via simultaneous co-precipitation in supercritical water. Appl Catal B 103:453–46110.1016/j.apcatb.2011.02.009 ↗
28. Huang L, Chen S, Zhu Y, Gong M, Chen Y (2013) Preparation of Ce0.65Zr0.35O2 by co-precipitation: the role of hydrogen peroxide. J Rare Earths 31:461–46910.1016/S1002-0721(12)60304-4 ↗
29. Zhao B, Wang Q, Li G, Zhou R (2010) Effect of synthesis condition on properties of Ce0.67Zr0.33O2 mixed oxides and its application in Pd-only three-way catalysts. J. Alloys Compd. 508:500–50610.1016/j.jallcom.2010.08.101 ↗
30. Hartmann P, Brezesinski T, Sann J, Lotnyk A, Eufing er JP, Kienle L, Janek J (2013) Defect chemistry of oxide nanomaterials with high surface area: ordered mesoporous thin films of the oxygen storage catalyst CeO2–ZrO2. ACS Nano 7:2999–301310.1021/nn400255w ↗
31. Wang P, Lv A, Hu J, Xu J, Lu G (2012) The synthesis of SAPO-34 with mixed template and its catalytic performance for methanol to olefins reaction. Microporous Mesoporous Mater 152:178–18410.1016/j.micromeso.2011.11.037 ↗
32. Yang R, Liu J, Li M (2004) Sythesis of mesoporous ceria using a non-surfactant template approach. J. Chin. Rare Earth Soc. 22:739–745
33. Bumajdad A, Zaki MI, Eastoe J, Pasupulety L (2006) Characterization of nano-cerias synthesized in microemulsions by N2 sorptiometry and electron microscopy. J Colloid Interface Sci 302:501–50810.1016/j.jcis.2006.06.050 ↗
34. Mamontov E, Egami T, Brezny R, Koranne M, Tyagi S (2000) Lattice defects and oxygen storage capacity of nanocrystalline ceria and ceria–zirconia. J. Phys. Chem. B 104:11110–1111610.1021/jp0023011 ↗
35. Mamontov E, Brezny R, Koranne M, Egami T (2003) Nanoscale heterogeneities and oxygen storage capacity of Ce0.5Zr0.5O2. J. Phys. Chem. B 107:13007–1301410.1021/jp030662l ↗
36. Yao MH, Baird RJ, Kunz FW, Hoost TE (1997) An XRD and TEM investigation of the structure of alumina-supported ceria–zirconia. J Catal 166:67–7410.1006/jcat.1997.1504 ↗
37. Colón G, Valdivieso F, Pijolar M, Baker RT, Calvino JJ, Bernal S (1999) Textural and phase stability of Ce x Zr1−x O2 mixed oxides under high temperature oxidising conditions. Catal Today 50:271–28410.1016/S0920-5861(98)00509-4 ↗
38. Kašpar J, Fornasiero P, Balducci G, Di Monte R, Hickey N, Sergo V (2003) Effect of ZrO2 content on textural and structural properties of CeO2–ZrO2 solid solutions made by citrate complexation route. Inorg Chim Acta 349:217–22610.1016/S0020-1693(03)00034-3 ↗
39. Kašpar J, Fornasiero P (2003) Nanostructured materials for advanced automotive de-pollution catalysts. J Solid State Chem 171:19–2910.1016/S0022-4596(02)00141-X ↗
40. Sun Y, Sermon PA (1996) Surface reactivity and bulk properties of ZrO2 Part 2. Importance of homogeneity in the stabilisation of high surface area CeO2–ZrO2 aerogels. J Mater Chem 6:1025–102910.1039/JM9960601025 ↗
41. Bozo C, Gaillard F, Guilhaume N (2001) Characterisation of ceria–zirconia solid solutions after hydrothermal ageing. Appl Catal A 220:69–7710.1016/S0926-860X(01)00710-4 ↗
42. Wang R, Crozier PA, Sharma R, Adams JB (2006) Nanoscale heterogeneity in ceria zirconia with low-temperature redox properties. J. Phys. Chem. B 110:18278–1828510.1021/jp063113z ↗
43. Damyanova S, Pawelec B, Arishtirova K, Huerta MVM, Fierro JLG (2008) Study of the surface and redox properties of ceria–zirconia oxides. Appl Catal A 337:86–9610.1016/j.apcata.2007.12.005 ↗
44. Kim DJ, Jung HJ (1993) Raman spectroscopy of tetragonal zirconia solid solutions. J Am Ceram Soc 76:2106–210810.1111/j.1151-2916.1993.tb08341.x ↗
45. Yashima M, Arashi H, Kakihana M, Yoshimura M (1994) Raman scattering study of cubic-tetragonal phase transition in Zr1−x Ce x O2 solid solution. J Am Ceram Soc 77:1067–107110.1111/j.1151-2916.1994.tb07270.x ↗
46. Lan L, Chen S, Cao Y, Zhao M, Gong M, Chen Y (2015) Preparation of ceria–zirconia by modified coprecipitation method and its supported Pd-only three-way catalyst. J Colloid Interface Sci 450:404–41610.1016/j.jcis.2015.03.042 ↗
47. Boaro M, Vicario M, de Leitenburg C, Dolcetti G, Trovarelli A (2003) The use of temperature-programmed and dynamic/transient methods in catalysis: characterization of ceria–based, model three-way catalysts. Catal Today 77:407–41710.1016/S0920-5861(02)00383-8 ↗
48. Fornasiero P, Di Monte R, Rao GR, Kašpar J, Meriani S, Trovarelli A, Graziani M (1995) Rh-loaded CeO2–ZrO2 solid solutions as highly efficient oxygen exchangers: dependence of the reduction behavior and the oxygen storage capacity on the structural properties. J Catal 151:168–17710.1006/jcat.1995.1019 ↗
49. Fally F, Perrichon V, Vidal H, Kašpar J, Blanco G, Pintado JM, Bernal S, Colond G, Daturi M, Lavalley JC (2000) Modification of the oxygen storage capacity of CeO2–ZrO2 mixed oxides after redox cycling aging. Catal Today 59:373–38610.1016/S0920-5861(00)00302-3 ↗
50. Vidal H, Kašpar J, Pijolat M, Colonb G, Bernal S, Cordón A, Perrichon V, Fally F (2000) Redox behavior of CeO2–ZrO2 mixed oxides I. Influence of redox treatments on high surface area catalysts. Appl Catal B 27:49–6310.1016/S0926-3373(00)00138-7 ↗
51. Vidmar P, Fornasiero P, Kašpar J, Gubitosa G, Graziani M (1997) Effects of trivalent dopants on the redox properties of Ce0.6Zr0.4O2 mixed oxide. J Catal 171:160–16810.1006/jcat.1997.1784 ↗
52. Kašpar J, Di Monte R, Fornasiero P, Graziani M, Bradshaw H, Norman C (2001) Dependency of the oxygen storage capacity in zirconia-ceria solid solutions upon textural properties. Top Catal 16(17):83–8710.1023/A:1016682831177 ↗
53. Fornasiero P, Fonda E, Di Monte R, Vlaic G, Kašpar J, Graziani M (1999) Relationships between structural/textural properties and redox behavior in Ce0.6Zr0.4O2 mixed oxides. J Catal 187:177–18510.1006/jcat.1999.2589 ↗
54. González-Velasco JR, Gutiérrez-Ortiz MA, Marc JL, Botas JA, González-Marcos MP, Blanchard G (1999) Contribution of cerium/zirconium mixed oxides to the activity of a new generation of TWC. Appl Catal B 22:167–17810.1016/S0926-3373(99)00054-5 ↗