Combustion synthesis/quasi-isostatic pressing of TiC–NiTi cermets: processing and mechanical response

TiC-NiTi composites were produced by a technique combining self-propagating high-temperature synthesis (SHS) of elemental powders of Ni, Ti, and C with densification by quasi-isostatic pressing (QIP). In order to create a one-step synthesis/densification process, the Ti ? Ni ? C reactant material was surrounded in a bed of graphite and alumina particulate before initiation of the combustion reaction. The sample was ignited within the particulate and subjected to a uniaxial load immediately after passage of the combustion wave. The constitutive response, composition and resulting structures of the composites with varying volume fractions of NiTi are characterized. Powder mixtures prepared anticipating the formation of stoichiometric TiC result in the formation of composites with a eutectic matrix of Ni3Ti and NiTi. This titanium impoverishment of the matrix is consistent with the formation of nonstoichiometric TiCx during the com- bustion reaction. The Ni3Ti phase can be suppressed by anticipating the formation of TiC0.7 and adjusting the chemical content of the reactant mixture to include addi- tional titanium. These cermets combine the high hardness of the ceramic phase with the possible shape memory and superelastic effects of NiTi. Introduction and objectives