Evaluation of residual stress in lead frame copper strips by nanoindentation
Source abstract
Abstract
Residual stress greatly influences the warping behavior of lead frame copper alloys and can be evaluated by nanoindentation. In this study, the residual stresses are calculated by Suresh’s model, Wang’s model, and Ghanbari’s model. In addition, an elastic work model, based on indentation unloading curve, is proposed. The results reveal that the residual stresses of all samples are determined to be compressive stresses. Furthermore, Wang’s model and the elastic work model may be considered to be most appropriative for the residual stress assessments in lead frame copper strips. More importantly, for the lead frame copper alloys, there will be an obvious pile-up effect during the indentation process. This effect is utilized to correct residual stresses in Suresh’s model, and identified that residual stresses decrease by about 300 MPa. This study has great significance for the development of the residual stress models by nanoindentation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Guan Y, Liu C, Gao Y, Zhu D, Han T, Jiang S (2017) Effect of annealing on microstructure and tensile properties of cold-rolled Cu-2.7Be sheets. Mater Charact 129: 156–162.10.1016/j.matchar.2017.04.026 ↗
2. Chen KX, Korzhavyi PA, Demange G, Zapolsky H, Patte R, Boisse J, Wang ZD (2019) Morphological instability of iron-rich precipitates in Cu-Fe-Co alloys. Acta Mater 163:55–6710.1016/j.actamat.2018.10.013 ↗
3. Cao H, Min JY, Wu SD, Xian AP, Shang JK (2006) Pinning of grain boundaries by second phase particles in equal-channel angularly pressed Cu-Fe-P alloy. Mater Sci Eng A 431(1–2):86–9110.1016/j.msea.2006.05.081 ↗
4. Zhou F, Zhang Y, Lu L, Song K, Gao H (2022) Effects of a thermal-ultrasonic stress relaxation process on the residual stress, mechanical properties and microstructures of C19400 copper alloy strips. Mater Sci Eng A 841:1–1310.1016/j.msea.2022.143014 ↗
5. Zhao DM, Dong QM, Liu P, Kang BX, Huang JL, Jin ZH (2003) Structure and strength of the age hardened Cu-Ni-Si alloy. Mater Chem Phys 79:81–86.10.1016/S0254-0584(02)00451-0 ↗
6. Shen L, Li Z, Zhang Z, Dong Q, Xiao Z, Lei Q, Qiu W (2014) Effects of silicon and thermo-mechanical process on microstructure and properties of Cu-10Ni-3Al-0.8Si alloy. Mater Des (1980–2015) 62:265–270.10.1016/j.matdes.2014.04.053 ↗
7. Hua Y, Nie Z, Wang L, Zhang H, Wang C, Tan C, Wang Y (2020) Studies of intergranular and intragranular stresses in cold-rolled Cu-Ni-Si alloys. J Alloy Compd 818:1–710.1016/j.jallcom.2019.152896 ↗
8. Li ZM, Li XN, Hu YL, Zheng YH, Yang M, Li NJ, Bi LX, Liu RW, Wang Q, Dong C, Jiang YX, Zhang XW (2021) Cuboidal γ’ phase coherent precipitation-strengthened Cu-Ni-Al alloys with high softening temperature. Acta Mater 203:1–1210.1016/j.actamat.2020.10.076 ↗
9. Fu H, Xu S, Li W, Xie J, Zhao H, Pan Z (2017) Effect of rolling and aging processes on microstructure and properties of Cu-Cr-Zr alloy. Mater Sci Eng, A 700:107–11510.1016/j.msea.2017.05.114 ↗
10. Fu S, Liu P, Chen X, Zhou H, Ma F, Li W, Zhang K (2021) Effect of aging process on the microstructure and properties of Cu-Cr-Ti alloy. Mater Sci Eng, A 802:1–910.1016/j.msea.2020.140598 ↗
11. Kim HS, Kim NH (2006) Toughening of thermosets by the creation of residual compressive stresses. J Appl Polym Sci 100(5):4045–405110.1002/app.23235 ↗
12. Guo J, Fu H, Pan B, Kang R (2021) Recent progress of residual stress measurement methods: a review. Chin J Aeronaut 34(2):54–7810.1016/j.cja.2019.10.010 ↗
13. Buchanan D, John R (2008) Relaxation of shot-peened residual stresses under creep loading. Scripta Mater 59(3):286–28910.1016/j.scriptamat.2008.03.021 ↗
14. Rossini NS, Dassisti M, Benyounis KY, Olabi AG (2012) Methods of measuring residual stresses in components. Mater Des 35:572–58810.1016/j.matdes.2011.08.022 ↗
15. Mothosi KL, Chikosha S, Madyira DM, Chikwanda HK (2017) Determination of residual stresses in roll compacted Titanium strips. Proc Manufact 7:309–31510.1016/j.promfg.2016.12.077 ↗
16. Beghini M, Bertini L, Monelli BD, Santus C, Bandini M (2014) Experimental parameter sensitivity analysis of residual stresses induced by deep rolling on 7075–T6 aluminium alloy. Surf Coat Technol 254:175–18610.1016/j.surfcoat.2014.06.008 ↗
17. Han K, Zhang D, Yao C, Tan L, Zhou Z, Zhao Y (2020) Investigation of residual stress distribution induced during deep rolling of Ti-6Al-4V alloy. Proc Inst Mech Eng B J Eng Manufact 235(1–2):186–197
18. Coules HE, Colegrove P, Cozzolino LD, Wen SW, Ganguly S, Pirling T (2013) Effect of high pressure rolling on weld-induced residual stresses. Sci Technol Weld Joining 17(5):394–40110.1179/1362171812Y.0000000021 ↗
19. Reddy KV, Pal S (2021) Cold-rolling induced residual stress effect on the shock response of crystalline-metallic glass (Cu-CuZr) nanolaminates by molecular dynamics simulation. Mater Chem Phys 272:1–1110.1016/j.matchemphys.2021.125010 ↗
20. Braga DFO, Coules HE, Pirling T, Richter-Trummer V, Colegrove P, de Castro PMST (2013) Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction. J Mater Process Technol 213(12):2323–232810.1016/j.jmatprotec.2013.07.004 ↗
21. Mahmoudi AH, Ghasemi A, Farrahi GH, Sherafatnia K (2016) A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening. Mater Des 90:478–48710.1016/j.matdes.2015.10.162 ↗
22. Abvabi A, Rolfe B, Hodgson PD, Weiss M (2015) The influence of residual stress on a roll forming process. Int J Mech Sci 101–102:124–13610.1016/j.ijmecsci.2015.08.004 ↗
23. Schneider J, Haindl H (2008) Mechanic treatment of fastener holes: the influence of compressive residual stress on the corrosion behaviour of aluminium alloys. Mater Corros 59(9):753–76110.1002/maco.200804149 ↗
24. Cretu SS, Benchea MI, Cretu OS (2007) Compressive residual stresses effect on fatigue life of rolling bearings. Int Mech Eng Congress Exposition 07:11–15
25. Terres MA, Laalai N, Sidhom H (2012) Effect of nitriding and shot-peening on the fatigue behavior of 42CrMo4 steel: experimental analysis and predictive approach. Mater Des 35:741–74810.1016/j.matdes.2011.09.055 ↗
26. Reis AC, Menezes MA, Moreira Filho LA (2007) Finite element analysis of warpage in laminated aluminium alloy plates for machining of primary aeronautic parts. In: AIP Conference Proceedings, pp 1360–1365.10.1063/1.2729704 ↗
27. Dayik M, Kayacan MC, Çaliş H, Çakmak E (2006) Control of warp tension during weaving procedure using evaluation programming. J Textile Institute 97(4):313–324.10.1533/joti.2005.0132 ↗
28. Grant P, Lord J, Whitehead P, Fry AT (2006) The application of fine increment hole drilling for measuring machining-induced residual stresses. Appl Mech Mater 3–4:105–11010.4028/www.scientific.net/AMM.3-4.105 ↗
29. Lord J, Grant PV, Fry AT, Kandil FA (2002) A UK residual stress intercomparison exercise-development of measurement good practice for the XRD and hole drilling techniques. Mater Sci Forum 404–407:567–57210.4028/www.scientific.net/MSF.404-407.567 ↗
30. Bendek E, Lira I, François M, Vial C (2006) Uncertainty of residual stresses measurement by layer removal. Int J Mech Sci 48(12):1429–143810.1016/j.ijmecsci.2006.07.002 ↗
31. Hatafuku H, Sarudate C, Konno A (2002) Estimation of residual stresses in magnetic metals by using ultrasonic method. IEEE Trans Magn 38(5):3309–331110.1109/TMAG.2002.802299 ↗
32. Hayashi M, Okido S, Morii Y, Minakawa N, Root JH (2003) Residual stress measurements of structural components by neutron diffraction and proposal measurement standard. Mater Sci Forum 426–432:3969–397410.4028/www.scientific.net/MSF.426-432.3969 ↗
33. Schneider L, Hainsworth S, Cocks A, Fitzpatrick M (2005) Neutron diffraction measurements of residual stress in a powder metallurgy component. Scripta Mater 52(9):917–92110.1016/j.scriptamat.2004.12.030 ↗
34. Genzel CH (2013) X-ray residual stress analysis in thin films under grazing incidence-basic aspects and applications. Mater Sci Technol 21(1):10–1810.1179/174328405X14100 ↗
35. Suresh S, Giannakopoulos AE (1998) A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater 46(16):5755–576710.1016/S1359-6454(98)00226-2 ↗
36. Swadener JG, Taljat B, Pharr GM (2001) Measurement of residual stress by load and depth sensing indentation with spherical indenters. J Mater Res 16:2091–210210.1557/JMR.2001.0286 ↗
37. Wang Q, Ozaki K (2006) Surface stress evaluation from indentation load-depth curves. Key Eng Mater 324–325:89–9210.4028/www.scientific.net/KEM.324-325.89 ↗
38. Ghanbari S, Bahr DF (2019) An energy-based nanoindentation method to assess localized residual stresses and mechanical properties on shot-peened materials. J Mater Res 34(07):1121–112910.1557/jmr.2019.41 ↗
39. Dey A, Mukhopadhyay AK (2014) Evaluation of residual stress in microplasma sprayed hydroxyapatite coating by nanoindentation. Ceram Int 40(1):1263–127210.1016/j.ceramint.2013.06.073 ↗
40. Ling L, Long S, Ma Z, Liang X (2010) Numerical study on the effects of equi-biaxial residual stress on mechanical properties of nickel film by means of nanoindentation. J Mater Sci Technol 26(11):1001–100510.1016/S1005-0302(10)60164-8 ↗
41. Liu J, Xu B, Wang H, Cui X, Zhu L, Jin G (2016) Effects of film thickness and microstructures on residual stress. Surf Eng 32(3):178–18410.1179/1743294415Y.0000000028 ↗
42. Liu J-N, Xu B-S, Wang H-D, Cui X-F, Zhu L-N, Jin G (2015) Measurement for mechanical behavior and fatigue property of Cu films by nanoscale dynamic load method. Mater Des (1980–2015) 65:1136–1142.10.1016/j.matdes.2014.08.043 ↗
43. Rong DS, Jiang Y, Gong JM (2016) Residual stress in low temperature carburised layer of austenitic stainless steel. Mater Sci Technol 33(3):277–28410.1080/02670836.2016.1190537 ↗
44. Sahami-Nejad M, Lashgari HR, Zangeneh S, Kong C (2019) Determination of residual stress on TIG-treated surface via nanoindentation technique in Co-Cr-Mo-C alloy. Surf Coat Technol 380:1–1110.1016/j.surfcoat.2019.125020 ↗
45. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19:1–1810.1557/jmr.2004.19.1.3 ↗
46. Liu M, Zheng Q, Wang X, Xu C (2022) Characterization of distribution of residual stress in shot-peened layer of nickel-based single crystal superalloy DD6 by nanoindentation technique. Mech Mater 164:1–1510.1016/j.mechmat.2021.104143 ↗
47. Bolshakov A, Pharr GM (1998) Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J Mater Res 13:1049–105810.1557/JMR.1998.0146 ↗
48. Guo Z, Jie J, Liu J, Yue S, Liu S, Li T (2020) Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu-15Ni-8Sn alloy. J Alloy Compd 848:1–1310.1016/j.jallcom.2020.156275 ↗
49. Ma M, Li Z, Xiao Z, Zhu H, Zhang X, Zhao F (2020) Microstructure and properties of a novel Cu-Cr-Yb alloy with high strength, high electrical conductivity and good softening resistance. Mater Sci Eng, A 795:1–810.1016/j.msea.2020.140001 ↗
50. Peng X, Li Y, Liang X, Guo Q, Xu G, Peng Y, Yin Z (2018) Precipitate behavior and mechanical properties of enhanced solution treated Al-Zn-Mg-Cu alloy during non-isothermal ageing. J Alloy Compd 735:964–97410.1016/j.jallcom.2017.11.178 ↗
51. Gao L, Yang X, Zhang X, Zhang Y, Sun H, Li N (2019) Aging behavior and phase transformation of the Cu-0.2 wt%Zr-0.15 wt%Y alloy. Vacuum 159:367–373.10.1016/j.vacuum.2018.10.054 ↗
52. Beach JA, Wang M, Bellon P, Dillon S, Ivanisenko Y, Boll T, Averback RS (2017) Self-organized, size-selection of precipitates during severe plastic deformation of dilute Cu-Nb alloys at low temperatures. Acta Mater 140:217–22310.1016/j.actamat.2017.08.041 ↗
53. Wu X, Wang R, Peng C, Feng Y, Cai Z (2020) Effects of cold rolling and low-temperature annealing on microstructure and mechanical properties of rapidly solidified Cu-3Ag-0.5Zr alloy. Mater Sci Eng A 773:1–15.10.1016/j.msea.2019.138829 ↗
54. Tian YZ, Zhao LJ, Park N, Liu R, Zhang P, Zhang ZJ, Shibata A, Zhang ZF, Tsuji N (2016) Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility. Acta Mater 110:61–7210.1016/j.actamat.2016.03.015 ↗
55. Subramanya Sarma V, Sivaprasad K, Sturm D, Heilmaier M (2008) Microstructure and mechanical properties of ultra fine grained Cu-Zn and Cu-Al alloys produced by cryorolling and annealing. Mater Sci Eng A 489(1–2):253–258.10.1016/j.msea.2007.12.016 ↗
56. Nikitin I, Besel M (2008) Residual stress relaxation of deep-rolled austenitic steel. Scripta Mater 58(3):239–24210.1016/j.scriptamat.2007.09.045 ↗
57. Guo FA, Xiang CJ, Yang CX, Cao XM, Mu SG, Tang YQ (2008) Study of rare earth elements on the physical and mechanical properties of a Cu-Fe-P-Cr alloy. Mater Sci Eng B 147(1):1–610.1016/j.mseb.2007.10.011 ↗
58. Lee HH, Yoon JI, Park HK, Kim HS (2019) Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling. Acta Mater 166:638–64910.1016/j.actamat.2019.01.021 ↗
59. Dong Q, Shen L, Cao F, Jia Y, Liao K, Wang M (2015) Effect of thermomechanical processing on the microstructure and properties of a Cu-Fe-P Alloy. J Mater Eng Perform 24(4):1531–153910.1007/s11665-014-1352-6 ↗
60. Zhu L-N, Xu B-S, Wang H-D, Wang C-B (2012) Effect of residual stress on the nanoindentation response of (100) copper single crystal. Mater Chem Phys 136(2–3):561–56510.1016/j.matchemphys.2012.07.026 ↗
61. Xu Z-H, Li X (2005) Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation. Acta Mater 53(7):1913–191910.1016/j.actamat.2005.01.002 ↗
62. Zhu L-N, Xu B-S, Wang H-D, Wang C-B (2012) On the evaluation of residual stress and mechanical properties of FeCrBSi coatings by nanoindentation. Mater Sci Eng A 536:98–10210.1016/j.msea.2011.12.078 ↗
63. Kim J-H, Choi S, Lee J, Ahn H-J, Kim Y-C, Choi M-J, Kwon D (2019) An indentation method for evaluation of residual stress: Estimation of stress-free indentation curve using stress-independent indentation parameters. J Mater Res 34(07):1103–111110.1557/jmr.2018.492 ↗
64. Nazari F, Honarpisheh M, Zhao H (2019) Effect of stress relief annealing on microstructure, mechanical properties, and residual stress of a copper sheet in the constrained groove pressing process. Int J Adv Manufact Technol 102(9–12):4361–437010.1007/s00170-019-03511-w ↗
65. Giannakopoulos AE, Suresh S (1999) Determination of elastoplastic properties by instrumented sharp indentation. Scripta Mater 40(10):1191–119810.1016/S1359-6462(99)00011-1 ↗
66. Zhu L-N, Xu B-S, Wang H-D, Wang C-B (2010) Determination of hardness of plasma-sprayed FeCrBSi coating on steel substrate by nanoindentation. Mater Sci Eng A 528(1):425–42810.1016/j.msea.2010.09.028 ↗