DataVXJournal of Materials SciencePaper
journal article·2024-05

Effect of graded microstructure on the modulus, hardness, and strength of hot-pressed ZrB2-B4C FGM

Ajit Kumar Naik, Lava Kumar Pillari, Manish Patel, Lukas Bichler, Tapas Laha, Siddhartha Roy

Journal of Materials Science· Volume 59· Issue 20
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Nisar A, Hassan R, Agarwal A, Balani K (2022) Ultra-high temperature ceramics: aspiration to overcome challenges in thermal protection systems. Ceram Int 48:8852–8881. https://doi.org/10.1016/j.ceramint.2021.12.19910.1016/j.ceramint.2021.12.199 ↗
2. Padture NP (2016) Advanced structural ceramics in aerospace propulsion. Nat Mater 15:804–809. https://doi.org/10.1038/nmat468710.1038/nmat4687 ↗
3. Parthasarathy TA, Petry MD, Jefferson G, Cinibulk MK, Mathur T, Gruber MR (2011) Development of a test to evaluate aerothermal response of materials to hypersonic flow using a scramjet wind tunnel. Int J Appl Ceram Technol 8:832–847. https://doi.org/10.1111/j.1744-7402.2010.02515.x10.1111/j.1744-7402.2010.02515.x ↗
4. Golla BR, Mukhopadhyay A, Basu B, Thimmappa SK (2020) Review on ultra-high temperature boride ceramics. Prog Mater Sci 111:100651. https://doi.org/10.1016/j.pmatsci.2020.10065110.1016/j.pmatsci.2020.100651 ↗
5. Justin JF, Jankowiak A (2011) Ultra high temperature ceramics: densification properties and thermal stability. AerospaceLab J 3:AL3-08
6. Venkateswaran T, Basu B, Raju GB, Kim DY (2006) Densification and properties of transition metal borides-based cermets via spark plasma sintering. J Eur Ceram Soc 26:2431–2440. https://doi.org/10.1016/j.jeurceramsoc.2005.05.01110.1016/j.jeurceramsoc.2005.05.011 ↗
7. Esposito L, Bellosi A (2005) Joining ZrB2-SiC composites using glass interlayers. J Mater Sci 40:4445–4453. https://doi.org/10.1007/s10853-005-2813-y10.1007/s10853-005-2813-y ↗
8. Inoue R, Arai Y, Kubota Y, Kogo Y, Goto K (2018) Oxidation of ZrB2 and its composites: a review. J Mater Sci 53:14885–14906. https://doi.org/10.1007/s10853-018-2601-010.1007/s10853-018-2601-0 ↗
9. Bansal NP (2005) Handbook of ceramic composites. Springer Kluwer Academic Publishers, Boston/Dordrecht/London, pp 1–53210.1007/b104068 ↗
10. Sengupta P, Basu S, Manna I (2021) Structure–property correlation in a novel ZrB2–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive. J Mater Sci 56:19029–19046. https://doi.org/10.1007/s10853-021-06427-710.1007/s10853-021-06427-7 ↗
11. Opila E, Levine S, Lorincz J (2004) Oxidation of ZrB2- and HfB2-based ultra-high temperature ceramics: effect of Ta additions. J Mater Sci 39:5969–5977. https://doi.org/10.1023/B:JMSC.0000041693.32531.d110.1023/B:JMSC.0000041693.32531.d1 ↗
12. Verma V, Cheverikin V, Câmara Cozza R (2020) Review: effect on physical, mechanical, and wear performance of ZrB2-based composites processed with or without additives. Int J Appl Ceram Technol 17:2509–2532. https://doi.org/10.1111/ijac.1356710.1111/ijac.13567 ↗
13. Cheng YH, Han WB, Liu DZ, An JD, Wang P, Zhao GD (2015) Spark plasma sintering of B4C-ZrB2 and B4C-ZrB2-SiC ceramics. Mater Res Innov 19:S1343–S1346. https://doi.org/10.1179/1432891715Z.000000000150110.1179/1432891715Z.0000000001501 ↗
14. Moshtaghioun BM, Ortiz AL, Gómez-García D, Domínguez-Rodríguez A (2013) Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition. J Eur Ceram Soc 33:1395–1401. https://doi.org/10.1016/j.jeurceramsoc.2013.01.01810.1016/j.jeurceramsoc.2013.01.018 ↗
15. Farahbakhsh I, Ahmadi Z, Shahedi Asl M (2017) Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black. Ceram Int 43:8411–8417. https://doi.org/10.1016/j.ceramint.2017.03.18810.1016/j.ceramint.2017.03.188 ↗
16. Mestvirishvili Z, Bairamashvili I, Kvatchadze V, Rekhviashvili N (2015) Thermal and mechanical properties of B4C-ZrB2 ceramic composite. J Mater Sci Eng B 5:2015. https://doi.org/10.17265/2161-6221/2015.9-10.00710.17265/2161-6221/2015.9-10.007 ↗
17. Huang SG, Vanmeensel K, Vleugels J (2014) Powder synthesis and densification of ultrafine B4C-ZrB2 composite by pulsed electrical current sintering. J Eur Ceram Soc 34:1923–1933. https://doi.org/10.1016/j.jeurceramsoc.2014.01.02210.1016/j.jeurceramsoc.2014.01.022 ↗
18. Neuman EW, Hilmas GE, Fahrenholtz WG (2017) Processing, microstructure, and mechanical properties of zirconium diboride-boron carbide ceramics. Ceram Int 43:6942–6948. https://doi.org/10.1016/j.ceramint.2017.02.11710.1016/j.ceramint.2017.02.117 ↗
19. Wenbo H, Jiaxing G, Jihong Z, Jiliang Y (2013) Microstructure and properties of B4C-Zrb2 ceramic composites. Int J Eng Innov Technol 3(163):166
20. He R, Jing L, Qu Z, Zhou Z, Ai S, Kai W (2015) Effects of ZrB2 contents on the mechanical properties and thermal shock resistance of B4C-ZrB2 ceramics. Mater Design 71:56–61. https://doi.org/10.1016/j.matdes.2015.01.00210.1016/j.matdes.2015.01.002 ↗
21. Hu P, Guolin W, Wang Z (2009) Oxidation mechanism and resistance of ZrB2–SiC composites. Corros Sci 51:2724–2732. https://doi.org/10.1016/j.corsci.2009.07.00510.1016/j.corsci.2009.07.005 ↗
22. Hu P, Wang Z (2010) Flexural strength and fracture behavior of ZrB2–SiC ultra-high temperature ceramic composites at 1800 °C. J Eur Ceram Soc 30:1021–1026. https://doi.org/10.1016/j.jeurceramsoc.2009.09.02910.1016/j.jeurceramsoc.2009.09.029 ↗
23. Zhang SC, Hilmas GE, Fahrenholtz WG (2006) Pressureless densification of zirconium diboride with boron carbide additions. J Am Ceram Soc 89:1544–1550. https://doi.org/10.1111/j.1551-2916.2006.00949.x10.1111/j.1551-2916.2006.00949.x ↗
24. Zhu S, Fahrenholtz WG, Hilmas GE, Zhang SC, Yadlowsky EJ, Keitz MD (2008) Microwave sintering of a ZrB2-B4C particulate ceramic composite. Compos Part A Appl Sci Manuf 39:449–453. https://doi.org/10.1016/j.compositesa.2008.01.00310.1016/j.compositesa.2008.01.003 ↗
25. Sciti D, Silvestroni L, Medri V, Monteverde F (2014) Sintering and Densification Mechanisms of Ultra‐High Temperature Ceramics. In: Fahrenholtz WG, Wuchina EJ, Lee WE, Zhou Y (eds) Ultra‐High Temperature Ceramics: Materials for Extreme Environment Applications. Wiley, pp 112–143. https://doi.org/10.1002/9781118700853.ch610.1002/9781118700853.ch6 ↗
26. Fahrenholtz WG, Hilmas GE, Zhang SC, Zhu S (2008) Pressureless sintering of zirconium diboride: particle size and additive effects. J Am Ceram Soc 91:1398–1404. https://doi.org/10.1111/j.1551-2916.2007.02169.x10.1111/j.1551-2916.2007.02169.x ↗
27. Chakraborty S, Debnath D, Mallick AR, Das PK (2015) Mechanical, tribological, and thermal properties of hot-pressed ZrB2-B4C composite. Int J Appl Ceram Technol 12:568–576. https://doi.org/10.1111/ijac.1229010.1111/ijac.12290 ↗
28. Sai Charan M, Naik AK, Kota N, Laha T, Roy S (2022) Review on developments of bulk functionally graded composite materials. Int Mater Rev 67:797–863. https://doi.org/10.1080/09506608.2022.202686310.1080/09506608.2022.2026863 ↗
29. Naik AK, Nazeer M, Prasad DKVD, Laha T, Roy S (2022) Development of functionally graded ZrB2–B4C composites for lightweight ultrahigh-temperature aerospace applications. Ceram Int 48:33332–33339. https://doi.org/10.1016/j.ceramint.2022.07.27610.1016/j.ceramint.2022.07.276 ↗
30. Oza MJ, Schell KG, Bucharsky EC, Laha T, Roy S (2021) Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties. Mater Sci Eng A 805:140625. https://doi.org/10.1016/j.msea.2020.14062510.1016/j.msea.2020.140625 ↗
31. Pietrzak K, Kaliński D, Chmielewski M (2007) Interlayer of Al2O3–Cr functionally graded material for reduction of thermal stresses in alumina–heat resisting steel joints. J Eur Ceram Soc 27:1281–1286. https://doi.org/10.1016/j.jeurceramsoc.2006.04.10210.1016/j.jeurceramsoc.2006.04.102 ↗
32. Birman V, Byrd LW (2007) Modeling and analysis of functionally graded materials and structures. Appl Mech Rev 60:195–216. https://doi.org/10.1115/1.277716410.1115/1.2777164 ↗
33. Rouf S, Malik A, Raina A, Irfan Ul Haq M, Naveed N, Zolfagharian A, Bodaghi M (2022) Functionally graded additive manufacturing for orthopedic applications. J Orthop 33:70–80. https://doi.org/10.1016/j.jor.2022.06.01310.1016/j.jor.2022.06.013 ↗
34. Maciejewski G, Mróz Z (2013) Optimization of functionally gradient materials in valve design under cyclic thermal and mechanical loading. Comput Assist Methods Eng Sci 20:99–112
35. Schwarzer E, Holtzhausen S, Scheithauer U, Ortmann C, Oberbach T, Moritz T, Michaelis A (2019) Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application. J Eur Ceram Soc 39:522–530. https://doi.org/10.1016/j.jeurceramsoc.2018.09.00310.1016/j.jeurceramsoc.2018.09.003 ↗
36. Zhang C, Chen F, Huang Z, Jia M, Chen G, Ye Y, Lin Y, Liu W, Chen B, Shen Q, Zhang L, Lavernia EJ (2019) Additive manufacturing of functionally graded materials: a review. Mater Sci Eng A 764:138209. https://doi.org/10.1016/j.msea.2019.13820910.1016/j.msea.2019.138209 ↗
37. Neuman EW, Thompson M, Fahrenholtz WG, Hilmas GE (2022) Elevated temperature thermal properties of ZrB2-B4C ceramics. J Eur Ceram Soc 42:4024–4029. https://doi.org/10.1016/j.jeurceramsoc.2022.03.02910.1016/j.jeurceramsoc.2022.03.029 ↗
38. He R, Jing L, Qu Z, Zhou Z, Ai S, Kai W (2015) Effects of ZrB2 contents on the mechanical properties and thermal shock resistance of B4C-ZrB2 ceramics. Mater Des 71:56–61. https://doi.org/10.1016/j.matdes.2015.01.00210.1016/j.matdes.2015.01.002 ↗
39. Le TD, Hirota K, Kato M, Miyamoto H, Yuasa M, Nishimura T (2020) Fabrication of dense ZrB2/B4C composites using pulsed electric current pressure sintering and evaluation of their high-temperature bending strength. Ceram Int 46:18478–18486. https://doi.org/10.1016/j.ceramint.2020.04.15310.1016/j.ceramint.2020.04.153 ↗
40. ASTM C20–00 (2015) Standard test methods for apparent porosity, water absorption, apparent specific gravity, and bulk density of burned refractory brick and shapes by boiling water. Am Soc Test Mater. 00: 1–3. https://doi.org/10.1520/C0020-00R10.210.1520/C0020-00R10.2 ↗
41. Naik AK, Maharana S, Bichler L, Laha T, Roy S (2023) Study of the influence of ZrB2 content and thermal shock on the elastic modulus of spark plasma sintered ZrB2-B4C composites using a non-destructive ultrasonic technique. J Eur Ceram Soc. https://doi.org/10.1016/j.jeurceramsoc.2023.09.06510.1016/j.jeurceramsoc.2023.09.065 ↗
42. Roy S, Gebert JM, Stasiuk G, Piat R, Weidenmann KA, Wanner A (2011) Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling. Mater Sci Eng A 528:8226–8235. https://doi.org/10.1016/j.msea.2011.07.02910.1016/j.msea.2011.07.029 ↗
43. Jana P, Ray S, Goldar D, Kota N, Kar SK, Roy S (2022) Study of the elastic properties of porous copper fabricated via the lost carbonate sintering process. Mater Sci Eng A 836:142713. https://doi.org/10.1016/j.msea.2022.14271310.1016/j.msea.2022.142713 ↗
44. Roy S, Stoll O, Weidenmann KA, Nagel A, Wanner A (2011) Analysis of the elastic properties of an interpenetrating AlSi12-Al2O3 composite using ultrasound phase spectroscopy. Compos Sci Technol 71:962–968. https://doi.org/10.1016/j.compscitech.2011.02.01410.1016/j.compscitech.2011.02.014 ↗
45. Roy S, Wanner A (2008) Metal/ceramic composites from freeze-cast ceramic preforms: domain structure and elastic properties. Compos Sci Technol 68:1136–1143. https://doi.org/10.1016/j.compscitech.2007.06.01310.1016/j.compscitech.2007.06.013 ↗
46. Roy S, Nagel A, Weidenmann KA (2020) Anisotropic thermal expansion behavior of an interpenetrating metal/ceramic composite. Thermochim Acta 684:178488. https://doi.org/10.1016/j.tca.2019.17848810.1016/j.tca.2019.178488 ↗
47. Roy S, Schell KG, Bucharsky EC, Hettich P, Dietrich S, Weidenmann KA, Wanner A, Hoffmann MJ (2012) Processing and elastic property characterization of porous SiC preform for interpenetrating metal/ceramic composites. J Am Ceram Soc 95:3078–3083. https://doi.org/10.1111/j.1551-2916.2012.05347.x10.1111/j.1551-2916.2012.05347.x ↗
48. Nazeer M, Jana P, Oza MJ, Bucharsky EC, Laha T, Roy S (2022) Ultrasonic study of the elastic properties of functionally graded and equivalent monolithic composites. Mater Lett. https://doi.org/10.1016/j.matlet.2022.13259410.1016/j.matlet.2022.132594 ↗
49. Chamberlain AL, Fahrenholtz WG, Hilmas GE (2004) High-strength zirconium diboride-based ceramics. J Am Ceram Soc 1172:1170–117210.1111/j.1551-2916.2004.01170.x ↗
50. Asl MS, Kakroudi MG, Noori S (2015) Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure. J Alloys Compd 619:481–487. https://doi.org/10.1016/j.jallcom.2014.09.00610.1016/j.jallcom.2014.09.006 ↗
51. Aguirre TG, Cramer CL, Cakmak E, Lance MJ, Lowden RA (2021) Processing and microstructure of ZrB2–SiC composite prepared by reactive spark plasma sintering. Results Mater 11:100217. https://doi.org/10.1016/j.rinma.2021.10021710.1016/j.rinma.2021.100217 ↗
52. Krishnarao RV (2017) Preparation of ZrB2 and ZrB2-SiC powders in a single step reduction of zircon (ZrSiO4) with B4C. Ceram Int 43:1205–1209. https://doi.org/10.1016/j.ceramint.2016.10.06410.1016/j.ceramint.2016.10.064 ↗
53. Rehman SS, Ji W, Fu Z, Wang W, Wang H, Asif M, Zhang J (2015) In situ synthesis and sintering of B4C/ZrB2 composites from B4C and ZrH2 mixtures by spark plasma sintering. J Eur Ceram Soc 35:1139–1145. https://doi.org/10.1016/j.jeurceramsoc.2014.10.01310.1016/j.jeurceramsoc.2014.10.013 ↗
54. Levin L, Frage N, Dariel MP (2000) A novel approach for the preparation of B4C-based cermets. Int J Refract Met Hard Mater 18:131–135. https://doi.org/10.1016/S0263-4368(00)00012-310.1016/S0263-4368(00)00012-3 ↗
55. Xu C, Cai Y, Flodström K, Li Z, Esmaeilzadeh S, Zhang G-J (2012) Spark plasma sintering of B4C ceramics: the effects of milling medium and TiB2 addition. Int J Refract Met Hard Mater 30:139–144. https://doi.org/10.1016/j.ijrmhm.2011.07.01610.1016/j.ijrmhm.2011.07.016 ↗
56. Li P, Ma M, Wu Y, Zhang X, Chang Y, Zhuge Z, Sun L, Hu W, Yu D, Xu B, Zhao Z, Chen J, He J, Tian Y (2021) Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles. J Eur Ceram Soc 41:3929–3936. https://doi.org/10.1016/j.jeurceramsoc.2021.02.03610.1016/j.jeurceramsoc.2021.02.036 ↗
57. Shahedi Asl M, Ghassemi Kakroudi M, Nayebi B (2015) A fractographical approach to the sintering process in porous ZrB2-B4C binary composites. Ceram Int 41:379–387. https://doi.org/10.1016/j.ceramint.2014.08.08110.1016/j.ceramint.2014.08.081 ↗
58. Mashhadi M, Taheri-Nassaj E, Sglavo VM, Sarpoolaky H, Ehsani N (2009) Effect of Al addition on pressureless sintering of B4C. Ceram Int 35:831–837. https://doi.org/10.1016/j.ceramint.2008.03.00310.1016/j.ceramint.2008.03.003 ↗
59. Rehman SS, Ji W, Khan SA, Fu Z, Zhang F (2015) Microstructure and mechanical properties of B4C densified by spark plasma sintering with Si as a sintering aid. Ceram Int 41:1903–1906. https://doi.org/10.1016/j.ceramint.2014.09.11510.1016/j.ceramint.2014.09.115 ↗
60. Mizrahi I, Raviv A, Dilman H, Aizenshtein M, Dariel MP, Frage N (2007) The effect of Fe addition on processing and mechanical properties of reaction infiltrated boron carbide-based composites. J Mater Sci 42:6923–6928. https://doi.org/10.1007/s10853-006-1304-010.1007/s10853-006-1304-0 ↗
61. Xie KY, Toksoy MF, Kuwelkar K, Zhang B, Krogstad JA, Haber RA, Hemker KJ (2014) Effect of alumina on the structure and mechanical properties of spark plasma sintered boron carbide. J Am Ceram Soc 97:3710–3718. https://doi.org/10.1111/jace.1317810.1111/jace.13178 ↗
62. Cavaliere P (ed) (2019) Spark plasma sintering of materials: advances in processing and applications. Springer International Publishing, Cham. https://doi.org/10.1007/978-3-030-05327-710.1007/978-3-030-05327-7 ↗
63. Grasso S, Sakka Y, Maizza G (2009) Pressure effects on temperature distribution during spark plasma sintering with graphite sample. Mater Trans 50:2111–2114. https://doi.org/10.2320/matertrans.M200914810.2320/matertrans.M2009148 ↗
64. Kashyap SK, Mitra R (2019) Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering. J Eur Ceram Soc 39:2782–2793. https://doi.org/10.1016/j.jeurceramsoc.2019.03.04310.1016/j.jeurceramsoc.2019.03.043 ↗
65. Mohammad Bagheri S, Vajdi M, Sadegh Moghanlou F, Sakkaki M, Mohammadi M, Shokouhimehr M, Shahedi Asl M (2020) Numerical modeling of heat transfer during spark plasma sintering of titanium carbide. Ceram Int 46:7615–7624. https://doi.org/10.1016/j.ceramint.2019.11.26210.1016/j.ceramint.2019.11.262 ↗
66. Tiwari D, Basu B, Biswas K (2009) Simulation of thermal and electric field evolution during spark plasma sintering. Ceram Int 35:699–708. https://doi.org/10.1016/j.ceramint.2008.02.01310.1016/j.ceramint.2008.02.013 ↗
67. Diatta J, Antou G, Pradeilles N, Maître A (2017) Numerical modeling of spark plasma sintering—discussion on densification mechanism identification and generated porosity gradients. J Eur Ceram Soc 37:4849–4860. https://doi.org/10.1016/j.jeurceramsoc.2017.06.05210.1016/j.jeurceramsoc.2017.06.052 ↗
68. Wang J, Long F, Wang W, Mo S, Zou Z, Fu Z (2016) Reaction coupling preparation of high sintering activity boron carbide nano-powders. Ceram Int 4:6969–6977. https://doi.org/10.1016/j.ceramint.2016.01.08310.1016/j.ceramint.2016.01.083 ↗
69. Madhav Reddy K, Guo JJ, Shinoda Y, Fujita T, Hirata A, Singh JP, McCauley JW, Chen MW (2012) Enhanced mechanical properties of nanocrystalline boron carbide by nanoporosity and interface phases. Nat Commun 3:1052. https://doi.org/10.1038/ncomms204710.1038/ncomms2047 ↗
70. He R, Zhou Z, Qu Z, Cheng X (2016) High temperature flexural strength and oxidation behavior of hot-pressed B4C–ZrB2 ceramics with various ZrB2 contents at 1000–1600°C in air. Int. J. Refract. Met. Hard Mater. 57:125–133. https://doi.org/10.1016/j.ijrmhm.2016.03.00510.1016/j.ijrmhm.2016.03.005 ↗
71. Haggerty RP, Sarin P, Apostolov ZD, Driemeyer PE, Kriven WM (2014) Thermal expansion of HfO2 and ZrO2. J Am Ceram Soc 97:2213–2222. https://doi.org/10.1111/jace.1297510.1111/jace.12975 ↗
72. Keihn FG, Keplin EJ (1967) High-temperature thermal expansion of certain group IV and group V diborides. J Am Ceram Soc 50:81–84. https://doi.org/10.1111/j.1151-2916.1967.tb15044.x10.1111/j.1151-2916.1967.tb15044.x ↗
73. Tsagareishvili GV, Nakashidze TG, Jobava JS, Lomidze GP, Khulelidze DE, Tsagareishvili DS, Tsagareishvili OA (1986) Thermal expansion of boron and boron carbide. J Less Common Met 117:159–161. https://doi.org/10.1016/0022-5088(86)90025-110.1016/0022-5088(86)90025-1 ↗
74. Deng Z-Y, Ferreira JMF, Tanaka Y, Isoda Y (2007) Microstructure and thermal conductivity of porous ZrO2 ceramics. Acta Mater 55:3663–3669. https://doi.org/10.1016/j.actamat.2007.02.01410.1016/j.actamat.2007.02.014 ↗
75. Medveď D, Balko J, Sedlák R, Kovalčíková A, Shepa I, Naughton-Duszová A, Bączek E, Podsiadło M, Dusza J (2019) Wear resistance of ZrB2 based ceramic composites. Int J Refract Met Hard Mater 81:214–224. https://doi.org/10.1016/j.ijrmhm.2019.03.004410.1016/j.ijrmhm.2019.03.0044 ↗
76. Sengupta P, Basu S, Manna I (2023) Comparative evaluation of TiC and/or WC addition on microstructure, mechanical properties, thermal residual stress and reciprocating wear behaviour of ZrB2–20SiC composites. J Mater Sci 58:420–442. https://doi.org/10.1007/s10853-022-08021-x10.1007/s10853-022-08021-x ↗
77. Ghosh D, Subhash G, Orlovskaya N (2008) Measurement of scratch-induced residual stress within SiC grains in ZrB2-SiC composite using micro-Raman spectroscopy. Acta Mater 56:5345–5354. https://doi.org/10.1016/j.actamat.2008.07.03110.1016/j.actamat.2008.07.031 ↗
78. Watts J, Hilmas G, Fahrenholtz WG, Brown D, Clausen B (2011) Measurement of thermal residual stresses in ZrB2-SiC composites. J Eur Ceram Soc 31:1811–1820. https://doi.org/10.1016/j.jeurceramsoc.2011.03.02410.1016/j.jeurceramsoc.2011.03.024 ↗
79. Taya M, Hayashi S, Kobayashi AS, Yoon HS (1990) Toughening of a particulate-reinforced ceramic-matrix composite by thermal residual stress. J Am Ceram Soc 73:1382–1391. https://doi.org/10.1111/j.1151-2916.1990.tb05209.x10.1111/j.1151-2916.1990.tb05209.x ↗
80. Lugovy M, Slyunyayev V, Orlovskaya N, Mitrentsis E, Aneziris CG, Graule T, Kuebler J (2016) Temperature dependence of elastic properties of ZrB2–SiC composites. Ceram Int 42:2439–2445. https://doi.org/10.1016/j.ceramint.2015.10.04410.1016/j.ceramint.2015.10.044 ↗
81. Kuliiev R (2020) Mechanical properties of boron carbide (B4C). pp 1–80. https://purls.library.ucf.edu/go/DP0023265
82. Ravichandran KS (1995) Thermal residual stresses in a functionally graded material system. Mater Sci Eng A 201:269–276. https://doi.org/10.1016/0921-5093(95)09773-210.1016/0921-5093(95)09773-2 ↗
83. Sharma A, Karunakar DB (2022) Influence of TiC addition on ablation and thermal shock behaviour of microwave sintered ZrB2–SiC–TiC composites. Ceram Int 48:34504–34515. https://doi.org/10.1016/j.ceramint.2022.08.03110.1016/j.ceramint.2022.08.031 ↗
84. Wei C, Zhang X, Hu P, Han W, Tian G (2011) The fabrication and mechanical properties of bionic laminated ZrB2–SiC/BN ceramic prepared by tape casting and hot pressing. Scr Mater 65:791–794. https://doi.org/10.1016/j.scriptamat.2011.07.031410.1016/j.scriptamat.2011.07.0314 ↗
85. Wei C, Liu X, Niu J, Feng L, Yue H (2016) High temperature mechanical properties of laminated ZrB2–SiC based ceramics. Ceram Int 42:18148–18153. https://doi.org/10.1016/j.ceramint.2016.08.12910.1016/j.ceramint.2016.08.129 ↗
86. Zhang L, Wei C, Li S, Wen G, Liu Y, Wang P (2019) Mechanical and thermal shock properties of laminated ZrB2-SiC/SiCw ceramics. Ceram Int 45:6503–6508. https://doi.org/10.1016/j.ceramint.2018.12.14010.1016/j.ceramint.2018.12.140 ↗