Fabrication and applications of two- and three-dimensional curved surfaces with robust underwater superoleophobic properties
Source abstract
Abstract
In this work, a method for the fabrication of two- and three-dimensional curved surfaces with robust underwater superoleophobicity is reported for the first time on light alloys (including 5083 Al and TC4 Ti alloys) through the high speed wire electrical discharge machining (HS-WEDM). The surface morphology and compositions were characterized by scanning electron microscope and energy-dispersive X-ray spectrometer. The results showed that rough structures and a layer of oxidization were created on the light alloys by HS-WEDM cutting. The two- and three-dimensional structured curved surfaces after an ethanol immersion exhibited the extreme underwater superoleophobic property with the high oil contact angle and low oil sliding angle. More importantly, the underwater superoleophobic surfaces with the three-dimensional curved features could have many new applications. In order to use the potential functions, the durability of the fabricated samples was tested and the results showed that the samples still exhibited the underwater superoleophobic property after the underwater storage and physical mechanism tests. Additionally, this method is versatile, simple, environment-friendly, and cost-effective.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Tuteja A, Choi W, Ma M, Mabry JM, Mazzella SA, Rutledge GC, McKinley GH, Cohen RE (2007) Designing superoleophobic surfaces. Science 318:1618–162210.1126/science.1148326 ↗
2. Deng X, Mammen L, Butt H, Vollmer D (2012) Candle soot as a template for a transparent robust superamphiphobic coating. Science 335:67–7010.1126/science.1207115 ↗
3. Wu XH, Fu QT, Kumara D, Ho JWC, Kanhere P, Zhou HF, Chen Z (2016) Mechanically robust superhydrophobic and superoleophobic coatings derived by sol–gel method. Mater Des 89:1302–130910.1016/j.matdes.2015.10.053 ↗
4. Liu XL, Zhou J, Xue ZX, Gao J, Meng JX, Wang ST, Jiang L (2012) Clam’s shell inspired high-energy inorganic coatings with underwater low adhesive superoleophobicity. Adv Mater 24:3401–340510.1002/adma.201200797 ↗
5. Zhang W, Zhu Y, Liu X, Wang D, Li J, Jiang L, Jin J (2014) Salt-induced fabrication of superhydrophilic and underwater superoleophobic PAA-g-PVDF membranes for effective separation of oil-in-water emulsions. Angew Chem Int Ed Engl 53:856–86010.1002/anie.201308183 ↗
6. Kim TI, Tahk D, Lee HH (2009) Wettability-controllable super water- and moderately oil-repellent surface fabricated by wet chemical etching. Langmuir 25:6576–657910.1021/la900106s ↗
7. Sun T, Feng L, Gao X, Jiang L (2005) Bioinspired surfaces with special wettability. Acc Chem Res 38:644–65210.1021/ar040224c ↗
8. Zhang XD, Wu P, Shen YY, Zhang LH, Xue YH, Zhu F, Zhang DC, Liu CL (2011) Structural and optical properties of Au-implanted ZnO films. Appl Surf Sci 258:151–15710.1016/j.apsusc.2011.08.022 ↗
9. Zhang F, Zhao L, Chen H, Xu S, Evans DG, Duan X (2008) Corrosion resistance of superhydrophobic layered double hydroxide films on aluminum. Angew Chem Int Ed Engl 47:2466–246910.1002/anie.200704694 ↗
10. Genzer J, Efimenko K (2006) Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review. Biofouling 22:339–36010.1080/08927010600980223 ↗
11. Farhadi S, Farzaneh M, Kulinich SA (2011) Anti-icing performance of superhydrophobic surfaces. Appl Surf Sci 257:6264–626910.1016/j.apsusc.2011.02.057 ↗
12. Wang Y, Xue J, Wang Q, Chen Q, Ding J (2013) Verification of icephobic/anti-icing properties of a superhydrophobic surface. ACS Appl Mater Interfaces 5:3370–338110.1021/am400429q ↗
13. Yang J, Li W (2013) Preparation of superhydrophobic surfaces on Al substrates and the anti-icing behavior. J Alloy Compd 576:215–21910.1016/j.jallcom.2013.04.060 ↗
14. Lee C, Kim CJ (2011) Underwater restoration and retention of gases on superhydrophobic surfaces for drag reduction. Phys Rev Lett 106:014502. doi: 10.1103/PhysRevLett.106.01450210.1103/PhysRevLett.106.014502 ↗
15. Liu XL, Gao J, Xue ZX, Chen L, Lin L, Jiang L, Wang ST (2012) Bioinspired oil strider floating at the oil/water interface supported by huge superoleophobic force. ACS Nano 6:5614–562010.1021/nn301550v ↗
16. Chen L, Liu MJ, Bai H, Chen PP, Xia F, Han D, Jiang L (2009) Antiplatelet and thermally responsive poly(N-isopropylacrylamide) surface with nanoscale topography. J Am Chem Soc 131:10467–1047210.1021/ja9019935 ↗
17. Yong JL, Chen F, Yang Q, Zhang DS, Farooq U, Du GQ, Hou X (2014) Bioinspired underwater superoleophobic surface with ultralow oil-adhesion achieved by femtosecond laser microfabrication. J Mater Chem A 2:8790–879510.1039/c4ta01277a ↗
18. Ding CM, Zhu Y, Liu MJ, Feng L, Wan MX, Jiang L (2012) PANI nanowire film with underwater superoleophobicity and potential-modulated tunable adhesion for no loss oil. Soft Matter 8:9064–906810.1039/c2sm25987g ↗
19. Yong JL, Yang Q, Chen F, Bian H, Du GQ, Farooq U, Hou X (2015) Reversible underwater lossless oil droplet transportation. Adv Mater Interfaces 2:1400388. doi: 10.1002/admi.20157000910.1002/admi.201570009 ↗
20. Xue ZX, Wang ST, Lin L, Chen L, Liu MJ, Feng L, Jiang L (2011) A novel superhydrophilic and underwater superoleophobic hydrogel coated mesh for oil/water separation. Adv Mater 23:4270–427310.1002/adma.201102616 ↗
21. Yong JL, Chen F, Yang Q, Bian H, Du GQ, Shan C, Huo JL, Fang Y, Hou X (2016) Oil–water separation: a gift from the desert. Adv Mater Interfaces 3:1500650. doi: 10.1002/admi.20150065010.1002/admi.201500650 ↗
22. Manna U, Lynn DM (2015) Synthetic surfaces with robust and tunable underwater superoleophobicity. Adv Funct Mater 25:1672–168110.1002/adfm.201403735 ↗
23. Xu LP, Peng JT, Liu YB, Wen YQ, Zhang XJ, Jiang L, Wang ST (2013) Nacre-inspired design of mechanical stable coating with underwater superoleophobicity. ACS Nano 7:5077–508310.1021/nn400650f ↗
24. Cheng QF, Li MZ, Zheng YM, Su B, Wang ST, Jiang L (2011) Janus interface materials: superhydrophobic air/solid interface and superoleophobic water/solid interface inspired by a lotus leaf. Soft Matter 7:5948–595110.1039/c1sm05452j ↗
25. Lin L, Liu MJ, Chen L, Chen PP, Ma J, Han D, Jiang L (2010) Bio-inspired hierarchical macromolecule-nanoclay hydrogels for robust underwater superoleophobicity. Adv Mater 22:4826–483010.1002/adma.201002192 ↗
26. Wu D, Wu SZ, Chen QD, Zhao S, Zhang H, Jiao J, Piersol JA, Wang JN, Sun HB, Jiang L (2011) Facile creation of hierarchical PDMS microstructures with extreme underwater superoleophobicity for anti-oil application in microfluidic channels. Lab Chip 11:3873–387910.1039/c1lc20226j ↗
27. Gao SJ, Shi Z, Zhang WB, Zhang F, Lin J (2014) Photoinduced superwetting single-walled carbon nanotube/TiO2 ultrathin network films for ultrafast separation of oil-in-water emulsions. ACS Nano 8:6344–635210.1021/nn501851a ↗
28. Sawai Y, Nishimoto S, Kameshima Y, Fujii E, Miyake M (2013) Photoinduced underwater superoleophobicity of TiO2 thin films. Langmuir 29:6784–678910.1021/la401382g ↗
29. Ma W, Xu H, Takahara A (2014) Substrate-independent underwater superoleophobic surfaces inspired by fish-skin and mussel-adhesives. Adv Mater Interfaces 1:1300092. doi: 10.1002/admi.20130009210.1002/admi.201300092 ↗
30. Xu LP, Zhao J, Su B, Liu XL, Peng JT, Liu YB, Liu HL, Wen YQ, Zhang XJ, Wang ST (2013) An ion-induced low-oil-adhesion organic/inorganic hybrid film for stable superoleophobicity in seawater. Adv Mater 25:606–61110.1002/adma.201203461 ↗
31. Cheng ZJ, Wang JW, Lai H, Du Y, Hou R, Li C, Zhang NQ, Sun KN (2015) pH-controllable on-demand oil/water separation on the switchable superhydrophobic/superhydrophilic and underwater low-adhesive superoleophobic copper mesh film. Langmuir 31:1393–139910.1021/la503676a ↗
32. Zheng X, Guo Z, Tian D, Zhang X, Li W, Jiang L (2015) Underwater self-cleaning scaly fabric membrane for oily water separation. ACS Appl Mater Interfaces 7:4336–434310.1021/am508814g ↗
33. Yang R, Moni P, Gleason KK (2015) Ultrathin zwitterionic coatings for roughness-independent underwater superoleophobicity and gravity-driven oil–water separation. Adv Mater Interfaces 2:1400489. doi: 10.1002/admi.20140048910.1002/admi.201400489 ↗
34. Ma XL, Luo H, Ma J, Wang PW, Xu XL, Jing GY (2013) A facile approach for fabrication of underwater superoleophobic alloy. Appl Phys A 113:693–70210.1007/s00339-013-7701-8 ↗
35. Wang H, Guo ZG (2014) Design of underwater superoleophobic TiO2 coatings with additional photo-induced self-cleaning properties by one-step route bio-inspired from fish scales. Appl Phys Lett 104:183703. doi: 10.1063/1.487611610.1063/1.4876116 ↗
36. Zeng JW, Guo ZG (2014) Superhydrophilic and underwater superoleophobic MFI zeolite-coated film for oil/water separation. Colloids Surf A Physicochem Eng Aspects 444:283–28810.1016/j.colsurfa.2013.12.071 ↗
37. Yong JL, Chen F, Yang Q, Du GQ, Shan C, Bian H, Farooq U, Hou X (2015) Bioinspired transparent underwater superoleophobic and anti-oil surfaces. J Mater Chem A 3:9379–938410.1039/C5TA01104C ↗
38. Bae WG, Song KY, Rahmawan Y, Chu CN, Kim D, Chung DK, Suh KY (2012) One-step process for superhydrophobic metallic surfaces by wire electrical discharge machining. ACS Appl Mater Interfaces 4:3685–369110.1021/am3007802 ↗
39. Weisensee PB, Torrealba EJ, Raleigh M, Jacobi AM, King WP (2014) Hydrophobic and oleophobic re-entrant steel microstructures fabricated using micro electrical discharge machining. J Micromech Microeng 24:095020. doi: 10.1088/0960-1317/24/9/09502010.1088/0960-1317/24/9/095020 ↗
40. Yu HD, Lian ZX, Wan YL, Weng ZK, Xu JK, Yu ZJ (2015) Fabrication of durable superamphiphobic aluminum alloy surfaces with anisotropic sliding by HS-WEDM and solution immersion processes. Surf Coat Technol 275:112–11910.1016/j.surfcoat.2015.05.032 ↗
41. Kunieda M, Lauwers B, Rajurkar KP, Schumacher BM (2005) Advancing EDM through fundamental insight into the process. CIRP Ann 54:64–8710.1016/S0007-8506(07)60020-1 ↗
42. Bleys P, Kruth JP, Lauwers B, Schacht B, Balasubramanian V, Froyen L, Van Humbeeck J (2006) Surface and sub-surface quality of steel after EDM. Adv Eng Mater 8:15–2510.1002/adem.200500211 ↗
43. Liu MJ, Wang ST, Wei ZX, Song YL, Jiang L (2009) Bioinspired design of a superoleophobic and low adhesive water/solid interface. Adv Mater 21:665–66910.1002/adma.200801782 ↗
44. Cassie ABD, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40:546–55110.1039/tf9444000546 ↗
45. Jin MH, Li SS, Wang J, Xue ZX, Liao MY, Wang ST (2012) Underwater superoleophilicity to superoleophobicity: role of trapped air. Chem Commun 48:11745–1174710.1039/c2cc34805e ↗
46. Sharipov AS, Starik AM (2015) Theoretical study of the reactions of ethanol with aluminum and aluminum oxide. J Phys Chem A 119:3897–390410.1021/acs.jpca.5b01718 ↗
47. Aussillous P, Quéré D (2001) Liquid marbles. Nature 411:924–92710.1038/35082026 ↗
48. Mertaniemi H, Forchheimer R, Ikkala O, Ras RHA (2012) Rebounding droplet–droplet collisions on superhydrophobic surfaces: from the phenomenon to droplet logic. Adv Mater 24:5738–574310.1002/adma.201202980 ↗
49. Seo K, Kim M, Kim DH (2014) Candle-based process for creating a stable superhydrophobic surface. Carbon 68:583–59610.1016/j.carbon.2013.11.038 ↗
50. Gao XF, Jiang L (2004) Biophysics: water-repellent legs of water striders. Nature 432:36. doi: 10.1038/432036a10.1038/432036a ↗