journal article·2008-12

Precipitation hardening and grain refinement in an Al–4.2wt%Mg–1.2wt%Cu processed by ECAP

V. Vidal, Z. R. Zhang, B. Verlinden

Journal of Materials Science· Volume 43· Issue 23-24
Publisher page

Abstract

The precipitation and the strength evolution during equal channel angular pressing performed at 180 °C in an Al–4.2wt% Mg–1.2wt%Cu alloy have been studied by room temperature compression tests and transmission electron microscopy. The age hardening behaviour of these AlMgCu alloys, in which the precipitation sequence involves the S-phase and its precursors, was investigated and revealed a yield strength peak after 8 days at 180 °C. The influence of the Severe Plastic Deformation on the microstructure and mechanical properties of under-aged and peak-aged samples are presented. Notably, in the under-aged sample, a gradual increase of the strength after each ECAP pass is obtained while, the peak-aged samples loose much of their strength during the first ECAP pass. TEM characterization of the microstructure before and after ECAP is presented and linked to the evolution of the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Prog Mater Sci 45:103. doi:https://doi.org/10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
2. Valiev R (2004) Nat Mater 3:511. doi:https://doi.org/10.1038/nmat118010.1038/nmat1180 ↗
3. Valiev RZ, Langdon TG (2006) Prog Mater Sci 51:881. doi:https://doi.org/10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
4. Iwahashi Y, Horita Z, Nemoto M, Langdon TG (1998) Metall Mater Trans 29A:250310.1007/s11661-998-0222-y ↗
5. Horita Z, Fujinami T, Nemoto M, Langdon TG (2001) J Mater Process Tech 117:288. doi:https://doi.org/10.1016/S0924-0136(01)00783-X10.1016/S0924-0136(01)00783-X ↗
6. Szczygiel P, Roven HJ, Reiso O (2005) Mater Sci Eng A 410:261. doi:https://doi.org/10.1016/j.msea.2005.08.05110.1016/j.msea.2005.08.051 ↗
7. Murayama M, Horita Z, Hono K (2001) Acta Mater 49:21. doi:https://doi.org/10.1016/S1359-6454(00)00308-610.1016/S1359-6454(00)00308-6 ↗
8. Xu C, Furukawa M, Horita Z, Langdon TG (2003) Acta Mater 51:6139. doi:https://doi.org/10.1016/S1359-6454(03)00433-610.1016/S1359-6454(03)00433-6 ↗
9. Ringer SP, Hono K, Sakurai T, Polmear IJ (1997) Scripta Mater 36:517. doi:https://doi.org/10.1016/S1359-6462(96)00415-010.1016/S1359-6462(96)00415-0 ↗
10. Ratchev P, Verlinden B, De Smet P, Van Houtte P (1998) Acta Mater 46:3523. doi:https://doi.org/10.1016/S1359-6454(98)00033-010.1016/S1359-6454(98)00033-0 ↗
11. Verlinden B, Popovic M (2006) Mater Sci Forum 503–50410.4028/www.scientific.net/MSF.503-504.107 ↗
12. Charai A, Walther T, Alfonso C, Zahra AM, Zahra CY (2000) Acta Mater 48:2751. doi:https://doi.org/10.1016/S1359-6454(99)00422-X10.1016/S1359-6454(99)00422-X ↗
13. Kovarik L, Gouma PI, Kisielowski C, Court SA, Mills MJ (2004) Acta Mater 52:2509. doi:https://doi.org/10.1016/j.actamat.2004.01.04110.1016/j.actamat.2004.01.041 ↗
14. Ringer SP, Sakurai T, Polmear IJ (1997) Acta Mater 45:3731. doi:https://doi.org/10.1016/S1359-6454(97)00039-610.1016/S1359-6454(97)00039-6 ↗
15. Reich L, Murayama M, Hono K (1998) Acta Mater 46:6053. doi:https://doi.org/10.1016/S1359-6454(98)00280-810.1016/S1359-6454(98)00280-8 ↗
16. Ratchev P, Verlinden B, De Smet P, Van Houtte P (1999) Mater Trans JIM 40:3410.2320/matertrans1989.40.34 ↗
17. Kang SB, Lim CY, Kim HW, Mao J (2002) Mater Sci Forum 396:116310.4028/www.scientific.net/MSF.396-402.1163 ↗
18. Roven HJ, Liu M, Werenskiold JC (2008) Mater Sci Eng A 483–484:54. doi:https://doi.org/10.1016/j.msea.2006.09.14210.1016/j.msea.2006.09.142 ↗
19. Zhang Z-R, Van Houtte P, Verlinden B (2008) Int J Mater Res 3:27310.3139/146.101633 ↗