Refining the hierarchical structure of lath martensitic steel by in situ alloying with nickel: morphology, crystallography, and mechanical properties
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Olson GB (1992) Martensite. ASM International, Russell Township
2. Figiel LS (1991) On Damascus Steel. Atlantis Arts Press, Amsterdam
3. Krauss G (1999) Martensite in steel: strength and structure. Mater Sci Eng A 273–275:40–57. https://doi.org/10.1016/s0921-5093(99)00288-910.1016/s0921-5093(99)00288-9 ↗
4. Shehryar Khan M, Razmpoosh MH, Macwan A et al (2021) Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite. J Mater Process Technol 293:117093. https://doi.org/10.1016/j.jmatprotec.2021.11709310.1016/j.jmatprotec.2021.117093 ↗
5. Shehryar Khan M, Enrique P, Ghatei-Kalashami A et al (2022) The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al-Si coated 22MnB5. Mater Sci Eng A 839:142830. https://doi.org/10.1016/j.msea.2022.14283010.1016/j.msea.2022.142830 ↗
6. Zhou YN, Saha DC, Biro E et al (2021) Pre-coated steel sheet comprising an additional coating for increasing the mechanical strength of the weld metal zone of a welded steel part prepared from said pre-coated sheet. World Intellect Prop Organ 24:154–166
7. Bhadeshia H, Honeycombe R (2017) Formation of martensite. In: Steels: microstructure and properties10.1016/B978-0-08-100270-4.00005-6 ↗
8. Krauss G, Marder AR (1971) The morphology of martensite in iron alloys. Metall Trans 2:2343–2357. https://doi.org/10.1007/BF0281487310.1007/BF02814873 ↗
9. Umemoto M, Yoshitake E, Tamura I (1983) The morphology of martensite in Fe-C, Fe-Ni-C and Fe-Cr-C alloys. J Mater Sci 18:2893–2904. https://doi.org/10.1007/BF0070077010.1007/BF00700770 ↗
10. Owen WS, Wilson EA, Bell T (1965) High strength materials. Wiley, Hoboken
11. Sherby OD, Wadsworth J, Lesuer DR, Syn CK (2007) The c/a ratio in quenched Fe-C and Fe-N steels–a heuristic story. Mater Sci Forum 539–543:215–222. https://doi.org/10.4028/www.scientific.net/msf.539-543.21510.4028/www.scientific.net/msf.539-543.215 ↗
12. Fink WL, Campbell ED (1926) The nature of the alloys of iron and chromium. Trans Am Soc Steel Treat 9:717
13. Öhman E (1931) Crystal structure of martensite. Nature 127:270–27210.1038/127270b0 ↗
14. Liu TW, Ping DH, Ohmura T, Ohnuma M (2018) Electron diffraction analysis of quenched Fe–C martensite. J Mater Sci 53:2976–2984. https://doi.org/10.1007/s10853-017-1731-010.1007/s10853-017-1731-0 ↗
15. Maki T, Tsuzaki K, Tamura I (1980) The morphology of microstructure composed of lath martensites in steels. Trans Iron Steel Inst Japan 20:207–214. https://doi.org/10.2355/isijinternational1966.20.20710.2355/isijinternational1966.20.207 ↗
16. Bhadeshia H, Honeycombe R (2017) Solutes that substitute for iron. In: Steels: microstructure and properties10.1016/B978-0-08-100270-4.00004-4 ↗
17. Krauss G (2001) Deformation and fracture in martensitic carbon steels tempered at low temperatures. Metall Mater Trans B Process Metall Mater Process Sci 32:205–22110.1007/s11663-001-0044-4 ↗
18. Morsdorf L, Tasan CC, Ponge D, Raabe D (2015) 3D structural and atomic-scale analysis of lath martensite: effect of the transformation sequence. Acta Mater 95:366–377. https://doi.org/10.1016/j.actamat.2015.05.02310.1016/j.actamat.2015.05.023 ↗
19. Stormvinter A, Miyamoto G, Furuhara T et al (2012) Effect of carbon content on variant pairing of martensite in Fe-C alloys. Acta Mater 60:7265–7274. https://doi.org/10.1016/j.actamat.2012.09.04610.1016/j.actamat.2012.09.046 ↗
20. Morito S, Tanaka H, Konishi R et al (2003) The morphology and crystallography of lath martensite in Fe-C alloys. Acta Mater 51:1789–1799. https://doi.org/10.1016/S1359-6454(02)00577-310.1016/S1359-6454(02)00577-3 ↗
21. Morito S, Huang X, Furuhara T et al (2006) The morphology and crystallography of lath martensite in alloy steels. Acta Mater 54:5323–5331. https://doi.org/10.1016/j.actamat.2006.07.00910.1016/j.actamat.2006.07.009 ↗
22. Kitahara H, Ueji R, Tsuji N, Minamino Y (2006) Crystallographic features of lath martensite in low-carbon steel. Acta Mater 54:1279–1288. https://doi.org/10.1016/j.actamat.2005.11.00110.1016/j.actamat.2005.11.001 ↗
23. Kurdjumov G, Sachs G (1930) Über den mechanismus der stahlhärtung. Zeitschrift für Phys 64:325–343. https://doi.org/10.1007/BF0139734610.1007/BF01397346 ↗
24. Kelly PM, Nutting J (1960) The martensite transformation in carbon steels. In: Proceedings of the royal society of London. pp 45–5810.1098/rspa.1960.0210 ↗
25. Marder AR, Krauss G (1969) The formation of low-carbon martensite in Fe-C alloys. Trans ASM 62:957–963
26. Schoen FJ, Nilles JL, Owen WS (1971) Crystallographic aspects of Fe-Ni and Fe-Ni-C dilute alloy martensites. Metall Trans 2:2489–2494. https://doi.org/10.1007/BF0281488710.1007/BF02814887 ↗
27. Chatterjee A, Ghosh A, Moitra A et al (2018) Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures. Int J Plast 104:104–133. https://doi.org/10.1016/j.ijplas.2018.02.00210.1016/j.ijplas.2018.02.002 ↗
28. Morsdorf L, Jeannin O, Barbier D et al (2016) Multiple mechanisms of lath martensite plasticity. Acta Mater 121:202–214. https://doi.org/10.1016/j.actamat.2016.09.00610.1016/j.actamat.2016.09.006 ↗
29. Kinney CC, Pytlewski KR, Khachaturyan AG, Morris JW (2014) The microstructure of lath martensite in quenched 9Ni steel. Acta Mater 69:372–385. https://doi.org/10.1016/j.actamat.2014.01.05810.1016/j.actamat.2014.01.058 ↗
30. Morito S, Saito H, Maki T et al (2005) Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels. ISIJ Int 45:91–94. https://doi.org/10.2355/isijinternational.45.9110.2355/isijinternational.45.91 ↗
31. Takayama N, Miyamoto G, Furuhara T (2012) Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel. Acta Mater 60:2387–2396. https://doi.org/10.1016/j.actamat.2011.12.01810.1016/j.actamat.2011.12.018 ↗
32. Takayama N, Miyamoto G, Furuhara T (2018) Chemistry and three-dimensional morphology of martensite-austenite constituent in the bainite structure of low-carbon low-alloy steels. Acta Mater 145:154–164. https://doi.org/10.1016/j.actamat.2017.11.03610.1016/j.actamat.2017.11.036 ↗
33. Hidalgo J, Santofimia MJ (2016) Effect of prior austenite grain size refinement by thermal cycling on the microstructural features of As-quenched lath martensite. Metall Mater Trans A Phys Metall Mater Sci 47:5288–5301. https://doi.org/10.1007/s11661-016-3525-410.1007/s11661-016-3525-4 ↗
34. Hanamura T, Torizuka S, Tamura S et al (2013) Effect of austenite grain size on the mechanical properties in air-cooled 0.1c-5Mn martensitic steel. ISIJ Int 53:2218–2225. https://doi.org/10.4028/www.scientific.net/msf.783-786.102710.4028/www.scientific.net/msf.783-786.1027 ↗
35. Wang C, Wang M, Shi J et al (2008) Effect of microstructural refinement on the toughness of low carbon martensitic steel. Scr Mater 58:492–495. https://doi.org/10.1016/j.scriptamat.2007.10.05310.1016/j.scriptamat.2007.10.053 ↗
36. Morito S, Yoshida H, Maki T, Huang X (2006) Effect of block size on the strength of lath martensite in low carbon steels. Mater Sci Eng A 438–440:237–240. https://doi.org/10.1016/j.msea.2005.12.04810.1016/j.msea.2005.12.048 ↗
37. Shibata A, Nagoshi T, Sone M et al (2010) Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test. Mater Sci Eng A 527:7538–7544. https://doi.org/10.1016/j.msea.2010.08.02610.1016/j.msea.2010.08.026 ↗
38. Galindo-Nava EI, Rivera-Díaz-Del-Castillo PEJ (2015) A model for the microstructure behaviour and strength evolution in lath martensite. Acta Mater 98:81–93. https://doi.org/10.1016/j.actamat.2015.07.01810.1016/j.actamat.2015.07.018 ↗
39. Maruyama N, Tabata S, Kawata H (2020) Excess solute carbon and tetragonality in As-quenched Fe-1Mn-C (C:0.07 to 0.8 mass Pct) martensite. Metall Mater Trans A Phys Metall Mater Sci 51:1085–1097. https://doi.org/10.1007/s11661-019-05617-y10.1007/s11661-019-05617-y ↗
40. Koohdar H, Hakimipour P, Jafarian HR et al (2021) Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment. Mater Sci Eng A 804:140760. https://doi.org/10.1016/j.msea.2021.14076010.1016/j.msea.2021.140760 ↗
41. Chakraborty A, Webster RF, Primig S (2022) Lath martensite substructure evolution in low-carbon microalloyed steels. J Mater Sci 57:10359–10378. https://doi.org/10.1007/s10853-022-07275-910.1007/s10853-022-07275-9 ↗
42. Durlu TN (2001) Effects of high austenitizing temperature and austenite deformation on formation of martensite in Fe-Ni-C alloys. J Mater Sci 36:5665–5671. https://doi.org/10.1023/A:101258210332710.1023/A:1012582103327 ↗
43. Zhu K, Shi H, Chen H, Jung C (2018) Effect of Al on martensite tempering: comparison with Si. J Mater Sci 53:6951–6967. https://doi.org/10.1007/s10853-018-2037-610.1007/s10853-018-2037-6 ↗
44. Scott CP, Shalchi Amirkhiz B, Pushkareva I et al (2018) New insights into martensite strength and the damage behaviour of dual phase steels. Acta Mater 159:112–122. https://doi.org/10.1016/j.actamat.2018.08.01010.1016/j.actamat.2018.08.010 ↗
45. Fonda RW, Spanos G (2014) Effects of cooling rate on transformations in a Fe-9 Pct Ni steel. Metall Mater Trans A Phys Metall Mater Sci 45:5982–5989. https://doi.org/10.1007/s11661-014-2588-310.1007/s11661-014-2588-3 ↗
46. Bandyopadhyay A, Traxel KD, Lang M et al (2022) Alloy design via additive manufacturing: advantages, challenges, applications and perspectives. Mater Today 52:207–224. https://doi.org/10.1016/j.mattod.2021.11.02610.1016/j.mattod.2021.11.026 ↗
47. Merklein M, Wieland M, Lechner M et al (2016) Hot stamping of boron steel sheets with tailored properties: a review. J Mater Process Technol 228:11–24. https://doi.org/10.1016/j.jmatprotec.2015.09.02310.1016/j.jmatprotec.2015.09.023 ↗
48. Inokuti Y, Cantor B (1977) The formation of martensite in splat-quenched Fe-Mn and Fe-Ni-C alloys. J Mater Sci 12:946–958. https://doi.org/10.1007/BF0054097710.1007/BF00540977 ↗
49. Zhang WX, Chen YZ, Cong YB et al (2021) On the austenite stability of cryogenic Ni steels: microstructural effects: a review. J Mater Sci 56:12539–12558. https://doi.org/10.1007/s10853-021-06068-w10.1007/s10853-021-06068-w ↗
50. Shehryar Khan M, Razmpoosh MH, Biro E, Zhou Y (2020) A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks. Sci Technol Weld Join 25:447–467. https://doi.org/10.1080/13621718.2020.174247210.1080/13621718.2020.1742472 ↗
51. Shehryar Khan M, Ali S, Westerbaan D et al (2022) The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels. J Manuf Process 78:242–253. https://doi.org/10.1016/j.jmapro.2022.04.02210.1016/j.jmapro.2022.04.022 ↗
52. Shehryar Khan M, Shahabad SI, Yavuz M et al (2021) Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels. J Manuf Process 67:535–544. https://doi.org/10.1016/j.jmapro.2021.05.00610.1016/j.jmapro.2021.05.006 ↗
53. Shehryar Khan M, Enrique P, Song G et al (2021) Laser-assisted wire cladding using a retrofitted laser welding system. Surf Eng 37:634–641. https://doi.org/10.1080/02670844.2020.182026610.1080/02670844.2020.1820266 ↗
54. Shehryar Khan M, Macwan A, Biro E, Zhou Y (2021) α-ferrite Suppression during Fiber Laser Welding of Al-Si Coated 22MnB5 Press-Hardened Steel. J Weld. https://doi.org/10.29391/2021.100.01810.29391/2021.100.018 ↗
55. Mainprice D, Bachmann F, Hielscher R, Schaeben H (2015) Descriptive tools for the analysis of texture projects with large datasets using MTEX: strength, symmetry and components. Geol Soc Spec Publ 409:251–271. https://doi.org/10.1144/SP409.810.1144/SP409.8 ↗
56. Niessen F, Nyyssönen T, Gazder AA, Hielscher R (2022) Parent grain reconstruction from partially or fully transformed microstructures in MTEX. J Appl Crystallogr 55:180–194. https://doi.org/10.1107/S160057672101156010.1107/S1600576721011560 ↗
57. Fan DW, Kim HS, De CBC et al (2008) A review of the physical metallurgy related to the hot press forming of advanced high strength steel. Steel Res Int 80:241–248. https://doi.org/10.2374/SRI08SP13110.2374/SRI08SP131 ↗
58. Celada-Casero C, Sietsma J, Santofimia MJ (2019) The role of the austenite grain size in the martensitic transformation in low carbon steels. Mater Des. https://doi.org/10.1016/j.matdes.2019.10762510.1016/j.matdes.2019.107625 ↗
59. Capdevila C, Caballero FG, Garcia de Andres C (2002) Determination of Ms temperature in steels: a bayesian neural network model. ISIJ Int 42:894–90210.2355/isijinternational.42.894 ↗
60. Wang SC, Yang JR (1992) Effects of chemical composition, rolling and cooling conditions on the amount of martensite/austenite (M/A) constituent formation in low carbon bainitic steels. Mater Sci Eng A 154:43–49. https://doi.org/10.1016/0921-5093(92)90361-410.1016/0921-5093(92)90361-4 ↗
61. Das D, Chattopadhyay PP (2009) Influence of martensite morphology on the work-hardening behavior of high strength ferrite-martensite dual-phase steel. J Mater Sci 44:2957–2965. https://doi.org/10.1007/s10853-009-3392-010.1007/s10853-009-3392-0 ↗
62. Hasan SM, Kumar S, Chakrabarti D, Singh SB (2020) Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite. Philos Mag 100:797–821. https://doi.org/10.1080/14786435.2020.171248610.1080/14786435.2020.1712486 ↗
63. Morsdorf L, Emelina E, Gault B et al (2021) Carbon redistribution in quenched and tempered lath martensite. Acta Mater 205:116521. https://doi.org/10.1016/j.actamat.2020.11652110.1016/j.actamat.2020.116521 ↗
64. Qi L, Khachaturyan AG, Morris JW (2014) The microstructure of dislocated martensitic steel: Theory. Acta Mater 76:23–39. https://doi.org/10.1016/j.actamat.2014.04.03810.1016/j.actamat.2014.04.038 ↗
65. Krauss G (2017) Tempering of lath martensite in low and medium carbon steels: assessment and challenges. Steel Res Int 88:1–18. https://doi.org/10.1002/srin.20170003810.1002/srin.201700038 ↗
66. Saha DC, Biro E, Gerlich AP, Zhou NY (2016) Fusion zone microstructure evolution of fiber laser welded press-hardened steels. Scr Mater 121:18–22. https://doi.org/10.1016/j.scriptamat.2016.04.03210.1016/j.scriptamat.2016.04.032 ↗
67. Hayashi T, Morito S, Ohba T (2020) Local distribution of orientation relationship and microstructure evolution of lath martensite in an ultra-low-carbon steel. Scr Mater 180:1–5. https://doi.org/10.1016/j.scriptamat.2020.01.01110.1016/j.scriptamat.2020.01.011 ↗
68. Sun D, Li C, Xue X et al (2020) Optimization scheme of the orientation relationship from crystallographic statistics of variants and its application to lath martensite. Mater Des 195:109022. https://doi.org/10.1016/j.matdes.2020.10902210.1016/j.matdes.2020.109022 ↗
69. Wright SI, Suzuki S, Nowell MM (2016) In Situ EBSD Observations of the Evolution in Crystallographic Orientation with Deformation. Jom 68:2730–2736. https://doi.org/10.1007/s11837-016-2084-x10.1007/s11837-016-2084-x ↗
70. MTEX Mis2Mean / GROD. https://mtex-toolbox.github.io/EBSDGROD.html
71. Iwashit K, Murata Y, Tsukada Y, Koyama T (2011) Formation mechanism of the hierarchic structure in the lath martensite phase in steels. Philos Mag 91:4495–4513. https://doi.org/10.1080/14786435.2011.61076310.1080/14786435.2011.610763 ↗
72. Lin L, Li B, shun, Zhu G ming, et al (2018) Effect of niobium precipitation behavior on microstructure and hydrogen induced cracking of press hardening steel 22MnB5. Mater Sci Eng A 721:38–46. https://doi.org/10.1016/j.msea.2018.02.02110.1016/j.msea.2018.02.021 ↗
73. Cho L, Bradley PE, Lauria DS et al (2021) Characteristics and mechanisms of hydrogen-induced quasi-cleavage fracture of lath martensitic steel. Acta Mater 206:116635. https://doi.org/10.1016/j.actamat.2021.11663510.1016/j.actamat.2021.116635 ↗
74. Chai Z, Lu Q, Hu J et al (2023) Effect of retained austenite on the fracture behavior of a novel press-hardened steel. J Mater Sci Technol 135:34–45. https://doi.org/10.1016/j.jmst.2022.06.05010.1016/j.jmst.2022.06.050 ↗
75. Saha DC, Westerbaan D, Nayak SS et al (2014) Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels. Mater Sci Eng A 607:445–453. https://doi.org/10.1016/j.msea.2014.04.03410.1016/j.msea.2014.04.034 ↗