journal article·2018-04

Investigation of flame-retarded poly(butylene succinate) composites using MHSH as synergistic and reinforced agent

Xiaopeng Yue, Jian Li, Pengjie Liu, Wenjuan Pu, Yicun Lin

Journal of Materials Science· Volume 53· Issue 7
Publisher page

Abstract

Magnesium hydroxide sulfate whisker (MHSH) was used as flame-retarded synergistic agent of intumescent flame retardant (IFR), and to prepare flame-retarded PBS composites. The mechanical performance and flame-retardant properties of composites were investigated. Experimental data showed that an appropriate MHSH loading favored the mechanical performance and flame-retardant properties of composites. When IFR and MHSH loadings were 23 and 2 wt%, respectively, the limited oxygen index value of 39.8% and UL-94 V0 rate of composite could be achieved. The tensile strength increased by 33.3% in comparison with that of composite only prepared by 25 wt% IFR. XRD analysis indicated that the addition of MHSH significantly increased the crystallization of composites. FT-IR analysis demonstrated that P–O–Mg–O–P bonds could be generated during pyrolysis process. TG and cone calorimeter analyses both indicated that the incorporation of MHSH and IFR lowered the flammability of composites by limiting heat and mass transfer. Based on the experimental and analyses data, especially the SEM analysis, possible mechanism was proposed. The combustion products of MHSH and IFR provided a flame shield during combustion process. MHSH played a reinforcement effect in the shield. A more stable three-dimensional intumescent charred layer could not only effectually prevent the melt from dripping but also hinder the diffusion of oxygen and heat into the interior substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Flame retardant materials and properties · Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Liu L, Yu J, Cheng L et al (2009) Mechanical properties of poly(butylenes succinate) (PBS) biocomposite reinforced with surface modified jute fiber. Compos Part A Appl Sci 40(5):669–67410.1016/j.compositesa.2009.03.002 ↗
2. Han SO, Lee SM, Park WH et al (2006) Mechanical and thermal properties of waste silk fiber-reinforced poly(butylene succinate) biocomposites. J Appl Polym Sci 100(6):4972–498010.1002/app.23300 ↗
3. Faludi G, Dora G, Renner K (2013) Biocomposite from polylactic acid and lignocellulosic fibers: structure-property correlations. Carbohydr Polym 92(2):1767–177510.1016/j.carbpol.2012.11.006 ↗
4. Kim KJ, White JL (2009) Effects of regenerated cellulose and natural fiber on interfacial adhesion, rheology and crystallization property in epsilon-polycaprolactone compounds. Compos Interface 16(7–9):619–63710.1163/092764409X12477406858223 ↗
5. Shen YL, Gong WG, Zheng BC et al (2016) Synergistic effect of Ni-based bimetallic catalyst with intumescent flame retardant on flame retardancy and thermal stability of polypropylene. Polym Degrad Stab 129:114–12410.1016/j.polymdegradstab.2016.04.006 ↗
6. Zheng ZH, Liu Y, Zhang L et al (2016) Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene. J Mater Sci 51(12):5857–587110.1007/s10853-016-9887-6 ↗
7. Bourbigot S, Duquesne S (2007) Fire retardant polymers: recent developments and opportunities. J Mater Chem 17(22):2283–230010.1039/b702511d ↗
8. Hu WZ, Wang BB, Wang X et al (2014) Effect of ethyl cellulose microencapsulated ammonium polyphosphate on flame retardancy, mechanical and thermal properties of flame retardant poly(butylene succinate) composites. J Therm Anal Calorim 117(1):27–2810.1007/s10973-014-3680-z ↗
9. Kuan CF, Kuan HC, Ma CCM et al (2006) Flame retardancy and nondripping properties of ammonium polyphosphate/poly(butylene succinate) composites enhanced by water crosslinking. J Appl Polym Sci 102(3):2935–294510.1002/app.24043 ↗
10. Wang X, Hu Y, Song L et al (2012) Comparative study on the synergistic effect of POSS and graphene with melamine phosphate on the flame retardance of poly(butylene succinate). Thermochim Acta 543:156–16410.1016/j.tca.2012.05.017 ↗
11. Chen YJ, Zhan J, Zhang P et al (2010) Preparation of intumescent flame retardant poly(butylene succinate) using fumed silica as synergistic agent. Ind Eng Chem Res 49(17):8200–820810.1021/ie100989j ↗
12. Gallo E, Braun U, Schartel B et al (2009) Halogen-free flame retarded poly(butylene terephthalate) (PBT) using metal oxides/PBT nanocomposites in combination with aluminium phosphinates. Polym Degrad Stab 94(8):1245–125310.1016/j.polymdegradstab.2009.04.014 ↗
13. Laachachi A, Cochez M, Leroy E et al (2007) Fire retardant systems in poly(methyl methacrylate): interactions between metal oxide nanoparticles and phosphinates. Polym Degrad Stab 92(1):61–6910.1016/j.polymdegradstab.2006.09.011 ↗
14. Zhao WP, Gao CH, Wang T (2015) Effect of alcohols additives on hydrothermal formation of magnesium hydroxide sulfate hydrate whiskers. Cryst Res Technol 50(8):676–68110.1002/crat.201500115 ↗
15. Gao CH, Li XG, Feng LJ et al (2010) Surface modification and characterization of magnesium hydroxide sulfate hydrate nanowhiskers. Appl Surf Sci 256(10):3234–323910.1016/j.apsusc.2009.12.011 ↗
16. Lu HD, Hu Y, Xiao JF et al (2006) Magnesium hydroxide sulfate hydrate whisker flame retardant polyethylene/montmorillonite nanocomposites. J Mater Sci 41(2):363–36710.1007/s10853-005-2374-0 ↗
17. Liao SF, Deng C, Huang SC (2016) An efficient halogen-free flame retardant for polyethylene: piperazine-modified ammonium polyphosphates with different structures. Chin J Polym Sci 34(11):1339–135310.1007/s10118-016-1855-8 ↗
18. Liang H, Shi WF (2004) Thermal behaviour and degradation mechanism of phosphate di/triacrylate used for UV curable flame-retardant coatings. Polym Degrad Stab 84(3):525–53210.1016/j.polymdegradstab.2003.11.006 ↗
19. Shih YF, Chieh YC (2007) Thermal degradation behavior and kinetic analysis of biodegradable polymers using various comparative models, 1-poly(butylene succinate). Macromol Theory Simul 16(1):101–11010.1002/mats.200600059 ↗
20. Tai HJ (2011) Dielectric spectroscopy of poly(butylene succinate-co-butylene adipate) films. Polym Eng Sci 51(2):386–39010.1002/pen.21819 ↗
21. Yan C, Zhang Y, Hu Y et al (2008) Melt crystallization and crystal transition ofpoly(butylene adipate) revealed by infrared spectroscopy. J Phys Chem B 112(11):3311–331410.1021/jp077195i ↗
22. Levchik SV, Levchik GF, Camino G et al (1995) Mechanism of action of phosphorus-based flame retardants in nylon-6 II. Ammonium polyphosphate/talc. J Fire Sci 13(1):43–5810.1177/073490419501300103 ↗
23. Wang ZZ, Zhou S, Hu Y (2009) Intumescent flame retardation and silane crosslinking of PP/EPDM elastomer. Polym Adv Technol 20(4):393–40310.1002/pat.1277 ↗
24. Li N, Xia Y, Mao ZW (2012) Influence of antimony oxide on flammability of polypropylene/intumescent flame retardant system. Polym Degrad Stab 97(9):1737–174410.1016/j.polymdegradstab.2012.06.011 ↗
25. Xia Y, Jin FF, Mao ZW et al (2014) Effects of ammonium polyphosphate to pentaerythritol ratio on composition and properties of carbonaceous foam deriving from intumescent flame-retardant polypropylene. Polym Degrad Stab 107(4):64–7310.1016/j.polymdegradstab.2014.04.016 ↗
26. Formosaa J, Chimenosa JM, Lacastac AM et al (2011) Thermal study of low-grade magnesium hydroxide used as fire retardant and in passive fire protection. Thermochim Acta 515(1):43–5010.1016/j.tca.2010.12.018 ↗
27. Bourbigot B, Bras ML, Duquesne S et al (2004) Recent advances for intumescent polymers. Macromol Mater Eng 289(6):499–51110.1002/mame.200400007 ↗
28. Bourbigot B, Bras ML, Delobel R et al (1993) Carbonization mechanisms resulting from intumescence-part II. Association with an ethylene terpolymer and the ammonium polyphosphate–pentaerythritol fire retardant system. Carbon 31(3):1219–123010.1016/0008-6223(93)90079-P ↗