Temperature-dependent thermal conductivities of non-alloyed and high-alloyed heat-treatable steels in the temperature range between 20 and 500 °C
Source abstract
Abstract
This work investigates the temperature-dependent thermal conductivity of the heat-treatable steels C45, 40CrMnMo7, and X42Cr13 in a high-tempered condition. The results reveal that the temperature-dependent evolution of the thermal conductivity is strongly influenced by alloying composition. Furthermore, not only the thermal diffusivity but also the specific isobaric heat capacity has a major impact on the resulting thermal conductivity at higher temperatures. The results are discussed with respect to the resulting microstructures and under consideration of Calphad calculations. The results are relevant for the thermal design of tools, particularly those used for high-pressure die casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Anderson MJ, McGuire K, Zante RC, Ion WJ, Rosochowski A, Brooks JW (2013) Identifying the dominant failure mode in the hot extrusion tooling used to forge nickel based superalloy. J Mater Process Technol 213(1):11110.1016/j.jmatprotec.2012.09.002 ↗
2. Firrao D, Matteis P, Russo Spena P, Gerosa R (2013) Influence of the microstructure on fatigue and fracture toughness properties of large heat-treated mold steels. Mater Sci Eng A 559:371–38310.1016/j.msea.2012.08.113 ↗
3. Valls I, Casas R, Rodriguez N, Paar U (2010) Benefits from using high thermal conductivity tool steels in the hot forming of steels. La Metallurgia Italiana 11–12:23–28
4. Klobcar D, Tusek J, Taljat B (2008) Thermal fatigue of materials for die-casting tooling. Mater Sci Eng A 472:198–20710.1016/j.msea.2007.03.025 ↗
5. Valls I, Casas B, Rodriguez N (2009) Importacce of tool material thermal conductivity. In: Beiss P, Broeckmann C, Franke S, Keysselitz B (eds) The die longevity and product quality in HPDC. in Tool steels - deciding factor in worldwide production, vol 1. Mainz, Aachen, pp 127–140
6. Hamasaiid A, Valls I, Heid R, Eibisch H (2012) A comparative experimental study on the use of two hot work tool steels for high pressure die casting of aluminum alloys: High thermal conductivity HTCS $$\textregistered $$ ® and conventional 1.2343 (AISI 11). In: Leitner H, Kranz R, Tremmel A (eds) TOOL 2012. Verlag Gutenberghaus, Knittelfeld, pp 153–161
7. Zhang B, Chen W, Poirier DR (2000) Effect of solidification cooling rate on the fatigue life of A356.2-T6 cast aluminium alloy. Fatigue & Fracture of Engineering Materials & Structures 23(5):417–42310.1046/j.1460-2695.2000.00299.x ↗
8. Hill H (2011) Neuartige Metallmatrixverbundwerkstoffe (MMC) zur Standzeiterhöhung verschleißbeanspruchter Werkzeuge in der polymerverarbeitenden Industrie. Eigenverlag des Lehrstuhls Werkstofftechnik der Ruhr-Universität Bochum, Bochum
9. Liu XF, Liu FQ, Yu BH, Bi C, Zhang B (2012) Pelletization quality simulation for operation uncertainty of die-plate based on liquid-solid-liquid coupling model. Adv Mater Res 557–559:2266–2273
10. Geiger M, Merklein M, Hoff C (2005) Basic Investigations on the Hot Stamping Steel 22MnB5. Adv Mater Res 6–8:795–80410.4028/www.scientific.net/AMR.6-8.795 ↗
11. Lenze FJ, Sikora S, Banik J, Straube O (2009) Hot forming-new potentials for innovative manufacturing. Steel Grips 7(6):428–432
12. Wilzer JJ, Lüdtke FS, Weber S, Theisen W (2013) The influence of heat treatment and resulting microstructures on the thermophysical properties of martensitic steels. J Mater Sci 48(24):8483–8492. doi: 10.1007/s10853-013-7665-210.1007/s10853-013-7665-2 ↗
13. Berns H, Theisen W (2008) Eisenwerkstoffe: Stahl und Gusseisen, 4th edn. Springer, Berlin
14. Kohlhaas R, Kierspe W (1965) Wärmeleitfähigkeit von reinem Eisen und einigen ferritischen und austenitischen Stählen zwischen der Temperatur der flüssigen Luft und Raumtemperatur. Archiv für das Eisenhüttenwesen 36(4):301–30910.1002/srin.196504085 ↗
15. Richter F, Kohlhaas R (1965) Wärmeleitfähigkeit des reinen Eisens zwischen -180 und 1000 $$\circ $$ ∘ C unter besonderer Berücksichtigung von Phasenumwandlungen. Archiv für das Eisenhüttenwesen 36(11):827–83310.1002/srin.196504155 ↗
16. Lange KW (1970) Zur Temperaturleitfähigkeit des Eisens. Archiv für das Eisenhüttenwesen 41(6):559–56210.1002/srin.197001644 ↗
17. Bungardt K, Spyra W (1965) Wärmeleitfähigkeit unlegierter und legierter Stähle und Legierungen bei Temperaturen zwischen 20 und 700 $$\circ $$ ∘ C. Archiv für das Eisenhüttenwesen 36(4):257–26710.1002/srin.196504080 ↗
18. Richter F (1973) ie wichtigsten physikalischen Eigenschaften von 52 Eisenwerkstoffen: Mitteilung aus dem Forschungsinstitut der Mannesmann AG, vol Heft 8. Stahleisen, Düsseldorf
19. Richter F (1983) Physikalische eigenschaften von Stählen und ihre temperaturabhängigkeit: polynome und graphische darstellungen, vol Heft 10. Stahleisen, Düsseldorf
20. Maurer E (1936) Wärmeleitfähigkeit von chromhaltigen Stählen bei hohen Temperaturen. Archiv für das Eisenhüttenwesen 10(4):145–15510.1002/srin.193600511 ↗
21. Esser H, Eilender W, Pütz E (1938) Die Wärmeleitfähigkeit von technisch reinem Eisen und verschiedenen Stählen. Archiv für das Eisenhüttenwesen 11(12):619–62210.1002/srin.193801067 ↗
22. Terada Y, Ohkubo K, Mohri T, Suzuki T (2002) Effects of alloying additions on thermal conductivity of ferritic iron. ISIJ Int 42(3):322–32410.2355/isijinternational.42.322 ↗
23. Mayerhofer J (2012) Aspect of machining advanced mould and die steels. In: Leitner H, Kranz R, Tremmel A (eds) TOOL 2012. Verlag Gutenberghaus, Knittelfeld, pp 325–333
24. Berns H, Kettel J (1976) Ermittlung der Zusammensetzung von Grundmasse und Carbiden durch Rückstandsisolierung bei ledeburitischen Chromstählen. Archiv für das Eisenhüttenwesen 47(6):391–39310.1002/srin.197603743 ↗
25. P. Shi, B. Sundmann. Tcc™: Thermo-calc $$\textregistered $$ ® software, Stockholm (2010)
26. Hust JG (1983) Thermal conductivity and thermal diffusivity. In: Reed RP, Clark AF (eds) Materials at low temperatures. American Society for Metals, Metals Park, pp 133–16110.31399/asm.tb.mlt.t62860133 ↗
27. Tritt T, Weston D (2010) Measurement techniques and considerations for determining thermal conductivity of bulk materials. In: Tritt T (ed) Thermal conductivity. Springer, New York, pp 187–203
28. Patterson J, Morris E (1994) Measurement of absolute water density, 1 $$\circ $$ ∘ C to 40 $$\circ $$ ∘ C. Metrologia 31(4):277–28810.1088/0026-1394/31/4/001 ↗
29. Parker WJ, Jenkins RJ, Butler CP, Abbott GL (1961) Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity. J Appl Phys 32(9):1679–168410.1063/1.1728417 ↗
30. Kaschnitz E, Ebner R (2007) Thermal diffusivity of the aluminum alloy Al-17Si-4Cu (A390) in the solid and liquid states. Int J Thermophys 28(2):71110.1007/s10765-007-0172-4 ↗
31. Kaschnitz E, Küblböck M (2008) Thermal diffusivity of the aluminum alloy Al-5Mg-2Si-Mn (Magsimal-59) in the solid and liquid states. High Temp High Press 37:221–230
32. Pepperhoff W, Acet M (2001) Constitution and magnetism of iron and its alloys. Springer, Berlin10.1007/978-3-662-04345-5 ↗
33. Krauss G, Grossmann MA (1980) Principles of heat treatment of steel. American Society for Metals, Metals Park. http://www.worldcat.org/oclc/6357331
34. Porter D, Easterling KE, Sherif M (2009) Phase transformations in metals and alloys, 3rd edn. CRC Press, Boca Raton
35. Bjärbo A, Hättestrand M (2001) Complex carbide growth, dissolution, and coarsening in a modified 12 pct chromium steel: an experimental and theoretical study. Metall Mater Trans A 32:19–2710.1007/s11661-001-0247-y ↗
36. Schneider A, Inden G (2005) Simulation of the kinetics of precipitation reactions in ferritic steels. Acta Materialia 53:519–53110.1016/j.actamat.2004.10.008 ↗
37. Rokhmanov NY, Sirenko AF, Bakharev SA (1997) Thermal expansion of cementite in hypereutectoid iron-carbon alloy. Met Sci Heat Treat 39(1–2):7–1010.1007/BF02467199 ↗
38. Friedrich C, Berg G, Broszeit E, Berger C (1997) Datensammlung zu Hartstoffeigenschaften. Materialwissenschaft und Werkstofftechnik 28:59–7610.1002/mawe.19970280206 ↗
39. Weiss RJ, Tauer KJ (1956) Components of the thermodynamic functions of iron. Phys Rev 102(6):1490–149510.1103/PhysRev.102.1490 ↗
40. Braun M, Kohlhaas R (1965) Die spezifische Wärme von Eisen, Kobalt und Nickel im Bereich hoher Temperaturen. Physica Status Solidi 12(1):424–42910.1002/pssb.19650120142 ↗
41. Cezairliyan A, Ho CY, Anderson AC (1988) Specific heat of solids, vol I–2. Hemisphere Publishing Corporation, New York
42. Richter F, Born L (1984) Die spezifische Wärmekapazität von metallischen Werkstoffen: 1. Teil: Ferritische, umwandlungsfähige Stähle. Archiv für das Eisenhüttenwesen 55(3):127–13210.1002/srin.198405322 ↗
43. Olsson P, Abrikosov IA, Wallenius J (2006) Electronic origin of the anomalous stability of Fe-rich bcc Fe-Cr alloys. Phys Rev B 73:10441610.1103/PhysRevB.73.104416 ↗
44. Lavrentiev MY, Dudarev SL, Nguyen-Manh D (2011) Magnetic cluster expansion model for high-temperature magnetic properties of iron and iron-chromium alloys. J Appl Phys 109:07E12310.1063/1.3556900 ↗
45. Xiong W, Hedström P, Selleby M, Odqvist J, Thuvander M, Chen Q (2011) An improved thermodynamic modeling of the Fe–Cr system down to zero kelvin coupled with key experiments. CALPHAD 35:355–36610.1016/j.calphad.2011.05.002 ↗
46. Lavrentiev MY, Mergia K, Gjoka M, Nguyen-Manh D (2012) Magnetic cluster expansion simulation and experimental study of high temperature magnetic properties of Fe–Cr alloys. J Phys Condense Matter 24:32600110.1088/0953-8984/24/32/326001 ↗
47. Ruban AV, Razumovskiy VI (2012) First-principles based thermodynamic model of phase equilibria in bcc Fe–Cr alloys. Phys Rev B 86:17411110.1103/PhysRevB.86.174111 ↗
48. Reed RP, Clark AF (eds.) (1983) Materials at low temperatures. American Society for Metals, Metals Park. http://www.worldcat.org/oclc/972645810.31399/asm.tb.mlt.9781627083485 ↗
49. The American Society for Testing and Materials (2001) Standard test method for thermal diffusivity by the flash method, 1st edn. ASTM, West Conshohocken
50. Carslaw HS, Jaeger JC (1986) Conduction of heat in solids, 2nd edn. Clarendon Press, Oxford
51. Venkanna BK (2010) Fundamentals of heat and mass transfer. PHI Learning Private Limited, New Delhi
52. Bürgel R, Maier HJ, Niendorf T (2011) Handbuch Hochtemperatur-Werkstofftechnik: Grundlagen, Werkstoffbeanspruchungen, Hochtemperaturlegierungen und -beschichtungen, 4th edn. Vieweg + Teubner, Wiesbaden10.1007/978-3-8348-9907-1 ↗
53. Gavriljuk VG, Shanina BD, Berns H (2000) On the correlation between electron structure and short range atomic order in iron-based alloys. Acta Materialia 48:3879–389310.1016/S1359-6454(00)00192-0 ↗
54. Korzhavyi PA, Ruban AV (2009) Electronic structure and effective chemical and magnetic exchange interactions in bcc Fe-Cr alloys. Phys Rev B 79(5): 054202 (1–16)10.1103/PhysRevB.79.054202 ↗
55. Fert A, Campell IA (1968) Two-current conduction in nickel. Phys Rev Lett 21(16):1190–119210.1103/PhysRevLett.21.1190 ↗
56. Fert A (2008) Ursprung, Entwicklung und Zukunft der Spintronik: Nobel-Vortrag. Angewandte Chemie 120:6042–605410.1002/ange.200801093 ↗
57. Bäcklund NG (1961) An experimental investigation of the electrical and thermal conductivity of iron and some dilute iron alloys at temperatures above 100 K. J Phys Chem Solids 20(1/2):1–1610.1016/0022-3697(61)90132-9 ↗
58. Yang J (2010) Theory of Thermal Conductivity. In: Tritt T (ed) Thermal conductivity. Springer, New York, pp 1–20
59. Uher C (2010) Thermal Conductivity of Metals. In: Tritt T (ed) Thermal conductivity. Springer, New York, pp 22–88
60. Kittel C (2006) Einführung in die Festkörperphysik, 14th edn. Oldenbourg, München
61. Hofmann JA, Paskin A, Tauer KJ, Weiss RJ (1956) Analysis of ferromagnetic and antiferromagnetic second-order transitions. J Phys Chem Solids 1:45–6010.1016/0022-3697(56)90010-5 ↗