Measurement of effective chemical shrinkage and equilibrium modulus of silicone elastomer used in potted electronic system
Source abstract
Abstract
A fiber Bragg grating sensor technique is employed to measure two critical properties of elastomers for residual stress evaluation (total effective chemical shrinkage and equilibrium modulus). A novel experimental procedure is developed to cope with technical challenges associated with the extremely low modulus of elastomers. A constraint-free mold is first developed to ensure “free” movement of the elastomer during curing. Then, a special optical fiber with a diameter smaller than the standard fiber is employed in the experiment to make a test configuration unaffected by the free-edge effect. Two critical assumptions made for measurements are verified by an extra specimen with the standard fiber and a conventional tension test. The measured properties are used as input variables to analyze the stress distribution in a potted electrolytic capacitor system using FEM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Wang J-S, Tsai C-C, Liou J-S, Cheng W-C, Huang S-Y, Chang G-H, Cheng W-H (2012) Mean-time-to-failure evaluations of encapsulation materials for LED package in accelerated thermal tests. Microelectron Reliab 52:813–81710.1016/j.microrel.2011.07.057 ↗
2. Zhang Y, Wang Y-W, Zhang L-P, Lin X-J (2011) Current situation of silicone materials for high-power LED encapsulation [J]. Silicone Mater 3:010–015
3. Weng C-J (2009) Advanced thermal enhancement and management of LED packages. Int Commun Heat Mass Transfer 36:245–24810.1016/j.icheatmasstransfer.2008.11.015 ↗
4. Croll SG (1979) Residual stress in a solventless amine-cured epoxy coating. J Coatings Technol 51:49–55
5. Shh S, Krguller M, Sarigaphuti M (1992) Effects of shrinkage-reducing admixtures on restrained shrinkage cracking of concrete. ACI Mater J 89:289–295
6. Lai M, Friedrich K, Botsis J, Burkhart T (2010) Evaluation of residual strains in epoxy with different nano/micro-fillers using embedded fiber Bragg grating sensor. Composites Science and Technology 70:2168–217510.1016/j.compscitech.2010.08.019 ↗
7. Sun Y, Wang Y, Jang C, Han B, Choi K (2013) Generalized hybrid modeling to determine chemical shrinkage and modulus evolutions at arbitrary temperatures. Exp Mech 53:1–810.1007/s11340-012-9689-y ↗
8. McKee CT, Last JA, Russell P, Murphy CJ (2011) Indentation versus tensile measurements of Young’s modulus for soft biological tissues. Tissue Eng B 17:155–16410.1089/ten.teb.2010.0520 ↗
9. Dokukin ME, Sokolov I (2012) On the measurements of rigidity modulus of soft materials in nanoindentation experiments at small depth. Macromolecules 45:4277–428810.1021/ma202600b ↗
10. Wang Y, Han B, Kim D, Bar-Cohen A, Joseph P (2008) Integrated measurement technique for curing process-dependent mechanical properties of polymeric materials using fiber bragg grating. Exp Mech 48:107–11710.1007/s11340-007-9067-3 ↗
11. Wang Y, Woodworth L, Han B (2011) Simultaneous measurement of effective chemical shrinkage and modulus evolutions during polymerization. Exp Mech 51:1155–116910.1007/s11340-010-9410-y ↗
12. Tanaka N, Okabe Y, Takeda N (2003) Temperature-compensated strain measurement using fiber Bragg grating sensors embedded in composite laminates. Smart Mater Struct 12:940–94710.1088/0964-1726/12/6/011 ↗
13. Tao X, Tang L, Du W-C, Choy C-L (2000) Internal strain measurement by fiber Bragg grating sensors in textile composites. Composit Sci Technol 60:657–66910.1016/S0266-3538(99)00163-3 ↗
14. Sun Y, Wang Y, Kim Y, Han B (2013) Dual-configuration fiber Bragg grating sensor technique to measure coefficients of thermal expansion and hygroscopic swelling. Exp Mech 54:1–11
15. Zhang Y, Feng D, Liu Z, Guo Z, Dong X, Chiang K, Chu BC (2001) High-sensitivity pressure sensor using a shielded polymer-coated fiber Bragg grating. Photon Technol Lett IEEE 13:618–61910.1109/68.924043 ↗
16. Gafsi R, El-Sherif MA (2000) Analysis of induced-birefringence effects on fiber Bragg gratings. Opt Fiber Technol 6:299–32310.1006/ofte.2000.0333 ↗
17. Hocker G (1979) Fiber-optic sensing of pressure and temperature. Appl Opt 18:1445–144810.1364/AO.18.001445 ↗
18. Rabii CD, Harrington JA (1999) Mechanical properties of hollow glass waveguides. Opt Eng 38:1490–149910.1117/1.602261 ↗
19. Eom Y, Boogh L, Michaud V, Sunderland P, Månson JA (2000) Time-cure-temperature superposition for the prediction of instantaneous viscoelastic properties during cure. Polym Eng Sci 40:1281–129210.1002/pen.11256 ↗
20. Costa M, Botelho E, Rezende M (2006) Monitoring of cure kinetic prepreg and cure cycle modeling. J Mater Sci 41:4349–4356. doi: 10.1007/s10853-006-6082-110.1007/s10853-006-6082-1 ↗
21. Gasperi ML (1996) Life prediction model for aluminum electrolytic capacitors. In: Industry applications conference, 1996. Thirty-first IAS annual meeting, IAS’96, conference record of the 1996 IEEE, pp 1347–135110.1109/IAS.1996.559241 ↗
22. Parsa E, Huang H, Dasgupta A (2014) Multi-physics simulations for combined temperature/humidity loading of potted electronic assemblies. Microelectron Reliab 54:1182–119110.1016/j.microrel.2014.02.016 ↗