Corrosion and wear resistance of micro-arc oxidation coating on glass microsphere reinforced Mg alloy composite
Source abstract
Abstract
In this study, micro-arc oxidation (MAO) coatings were prepared on a novel glass microsphere reinforced Mg alloy composite to retard the degradation of the composite in the liquid environment containing Cl− for degradable downhole tool applications. The microstructure and chemical composition of the coatings were characterized by SEM, EDS, XPS and XRD. The growth characteristics of the MAO coatings on different matrix regions were analyzed. The corrosion and wear resistance of the coatings were evaluated through the immersion test, electrochemical measurements and friction test. Results showed that the MAO coatings consisted primarily of Mg2SiO4, MgO, little amount of MgAl2O4 and amorphous SiO2. The current density influenced the thickness and structure via affecting the voltage response of the MAO process, afterward influencing the properties of the coatings. The termination voltage of the MAO process and thickness of the coatings increased with the current density. With the current density increased from 8 to 160 mA/cm2, the compactness and microhardness of the coatings were increased, thereby improving the corrosion and wear resistance of the coatings. However, as the current density increased to 200 mA/cm2, the generation of large through-cracks caused the friction coefficient to increase and the corrosion resistance to deteriorate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Li K, Shi YX, Luo XP, Liu BS (2020) Influence of Al content on degradation behavior of Cu-doped Mg-Al alloys for drill-free plugging applications. Adv Mater Sci Eng 2020:8898669. https://doi.org/10.1155/2020/889866910.1155/2020/8898669 ↗
2. Zhang YZ, Wang XY, Kuang YF, Liu BS, Zhang KW, Fang DQ (2017) Enhanced mechanical properties and degradation rate of Mg-3Zn-1Y based alloy by Cu addition for degradable fracturing ball applications. Mater Lett 195:194–19710.1016/j.matlet.2017.02.024 ↗
3. Niu HY, Deng KK, Nie KB, Cao FF, Zhang XC, Li WG (2019) Microstructure, mechanical properties and corrosion properties of Mg-4Zn-xNi alloys for degradable fracturing ball applications. J Alloy Compd. https://doi.org/10.1016/j.jallcom.2019.02.08910.1016/j.jallcom.2019.02.089 ↗
4. Zheng C, Liu YH, Wang HX, Qin J, Chen C, Zhang SH (2017) Dissolvable fracturing tool based on a controlled electrolytic method. J Petrol Sci Eng 153:81–8710.1016/j.petrol.2017.03.035 ↗
5. Du BD, He TT, Liu GL, Chen W, Wang YM, Wang W, Chen DM (2018) Al-water reactivity of Al-Mg-Ga-In-Sn alloys used for hydraulic fracturing tools. Int J Hydrogen Energ 43:7201–721510.1016/j.ijhydene.2018.02.090 ↗
6. Chen L, Wu Z, Xiao DH, Geng ZW, Zhou PF (2015) Effects of copper on the microstructure and properties of Mg-17Al-3Zn alloys. Mater Corros 66:1159–116810.1002/maco.201408090 ↗
7. Xiao DH, Geng ZW, Chen L, Wu Z, Diao HY, Song M, Zhou PF (2015) Effects of alloying elements on microstructure and properties of magnesium alloys for tripling ball. Metall Mater Trans A 46:4793–480310.1007/s11661-015-3053-7 ↗
8. Li XW, Shi T, Li B, Zhou XG, Zhang CW, He ZY, Zhang BB, Zhang QX (2020) Microstructures and electrochemical behaviors of as-cast magnesium alloys with enhanced compressive strengths and corrosion decomposition. Mater Corros 71:1989–199810.1002/maco.202011865 ↗
9. Wang JF, Gao SQ, Liu XY, Peng X, Wang K, Liu SJ, Jiang WY, Guo SF, Pan FS (2020) Enhanced mechanical properties and degradation rate of Mg-Ni-Y alloy by introducing LPSO phase for degradable fracturing ball applications. J Magnes Alloy 8:127–13310.1016/j.jma.2019.11.010 ↗
10. Liu L, Yu SR, Niu YF, Liu EY (2020) Preparation and properties of hollow glass microspheres reinforced Mg alloy degradable composites. J Alloys Compd 835:15519810.1016/j.jallcom.2020.155198 ↗
11. Liu L, Yu SR, Liu EY, Zhao Y, Wang BY, Niu YF (2021) Effect of Ni addition on the mechanical and degradation properties of hollow glass microsphere/Mg alloy composites. J Alloys Compd 853:15712510.1016/j.jallcom.2020.157125 ↗
12. Lei T, Ouyang C, Tang W, Li LF, Zhou L (2010) Enhanced corrosion protection of MgO coatings on magnesium alloy deposited by an anodic electrodeposition process. Corros Sci 52:3504–350810.1016/j.corsci.2010.06.028 ↗
13. Ishizaki T, Shimada Y, Tsunakawa M, Lee H, Yokomizo T, Hisada S, Nakamura K (2017) Rapid fabrication of a crystalline myristic acid-based superhydrophobic film with corrosion resistance on magnesium alloys by the facile one-step immersion process. ACS Omega 2:7904–791510.1021/acsomega.7b01256 ↗
14. Soliman H, Qian J, Tang S, Xian P, Wan G (2020) Hydroxyquinoline/nano-graphene oxide composite coating of self-healing functionality on treated Mg alloys AZ31. Surf Coat Technol 385:12539310.1016/j.surfcoat.2020.125395 ↗
15. Li T, Wang SW, Liu HT, Wu JH, Tang SQ, Yang YS, Wang XT, Zhou JX (2021) Improved corrosion resistance of Mg alloy by a green phosphating: insights into pre-activation, temperature, and growth mechanism. J Mater Sci 56:828–843. https://doi.org/10.1007/s10853-020-05288-w10.1007/s10853-020-05288-w ↗
16. Kalaiyarasan M, Saranya K, Rajendran N (2020) In-vitro corrosion assessment of silicate-coated AZ31 Mg alloy in Earle’s solution. J Mater Sci 55:3571–3587. https://doi.org/10.1007/s10853-019-04039-w10.1007/s10853-019-04039-w ↗
17. Yin ZZ, Qi WC, Zeng RC, Chen XB, Gu CD, Guang SK, Zheng YF (2020) Advances in coatings on biodegradable magnesium alloys. J Magnes Alloy 8:42–6510.1016/j.jma.2019.09.008 ↗
18. Muhaffel F, Cimenoglu H (2019) Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy. Surf Coat Tech 357:822–83210.1016/j.surfcoat.2018.10.089 ↗
19. Liu EY, Niu YF, Yu SR, Liu L, Zhang K, Bi XJ, Liang JH (2020) Micro-arc oxidation behavior of fly ash cenospheres/magnesium alloy degradable composite and corrosion resistance of coatings. Surf Coat Tech 391:12569310.1016/j.surfcoat.2020.125693 ↗
20. Jia ZJ, Li M, Liu Q, Xu XC, Cheng Y, Zheng YF, Xi TF, Wei SC (2014) Micro-arc oxidization of a novel Mg-1Ca alloy in three alkaline KF electrolytes: corrosion resistance and cytotoxicity. Appl Surf Sci 292:1030–103910.1016/j.apsusc.2013.11.038 ↗
21. Kaseem M, Hoom J, Gun Ko Y (2017) Corrosion behavior of Al-1wt% Mg-0.85wt%Si alloy coated by microarc-oxidation using TiO2 and Na2MoO4 additives: Role of current density. J Alloys Compd 723:448–45510.1016/j.jallcom.2017.06.275 ↗
22. Ghasemi A, Raja VS, Blawert C, Dietzel W, Kainer KU (2010) The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings. Surf Coat Technol 204:1469–147810.1016/j.surfcoat.2009.09.069 ↗
23. Gao H, Zhang M, Yang X, Huang P, Xu K (2014) Effect of Na2SiO3 solution concentration of micro-arc oxidation process on lap-shear strength of adhesive-bonded magnesium alloys. Appl Surf Sci 314:447–45210.1016/j.apsusc.2014.06.117 ↗
24. Yue Y, Hua W (2012) Effect of current density on corrosion resistance of micro-arc oxide coatings on magnesium alloy. Trans Nonferrous Met Soc China 20:688–692
25. Duan HP, Yan CW, Wang FH (2007) Growth process of plasma electrolytic oxidation films formed on magnesium alloy AZ91D in silicate solution. Electrochim Acta 52:5002–500910.1016/j.electacta.2007.02.021 ↗
26. Chai L, Xia Y, Yang Z, Wang Y, Okido M (2008) Anodizing of magnesium alloy AZ31 in alkaline solutions with silicate under continuous sparking. Corros Sci 50:3274–327910.1016/j.corsci.2008.08.038 ↗
27. Li CY, Feng XL, Yu XT, Yin ZZ, Kannan MB, Chen XB, Guan SK, Zhang J, Zeng RC (2019) Corrosion and wear resistance of micro-arc oxidation composite coatings on magnesium alloy AZ31-the influence of inclusions of carbon spheres. Adv Eng Mater 21:190044610.1002/adem.201900446 ↗
28. Hussein RO, Nie X, Northwood DO (2013) An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing. Electrochim Acta 112:111–11910.1016/j.electacta.2013.08.137 ↗
29. Nashrah N, Kamil MP, Yoon DK, Kim YG, Ko YG (2019) Formation mechanism of oxide layer on AZ31 Mg alloy subjected to microarc oxidation considering surface roughness. Appl Surf Sci 497:14377210.1016/j.apsusc.2019.143772 ↗
30. Xue WB (2006) Features of film growth during plasma anodizing of Al 2024/SiC metal matrix composite. Appl Surf Sci 252:6195–620010.1016/j.apsusc.2005.08.029 ↗
31. Guo HF, An MZ (2005) Growth of ceramic coatings on AZ91D magnesium alloys by microarc oxidation in aluminate-fluoride solutions and evaluation of corrosion resistance. Appl Surf Sci 246:229–23810.1016/j.apsusc.2004.11.031 ↗
32. Yin D, Niu X, Zhang K, Wang J, Cui D (2018) Preparation of MgO doped colloidal SiO2 abrasive and their chemical mechanical polishing performance on c-, r- and a-plane sapphire substrate. Ceram Int 44:14631–1463710.1016/j.ceramint.2018.05.087 ↗
33. Brambilla E, Radtke C, Dos Santos JHZ, Miranda MSL (2009) An investigation on structure and texture of silica-magnesia xerogels. J Sol-Gel Sci Technol 51:70–7710.1007/s10971-009-1937-y ↗
34. Tian N, Zhou Z, Tian X, Yang C, Li Y (2017) Superior capability of MgAl2O4 for selenite removal from contaminated groundwater during its reconstruction of layered double hydroxides. Sep Purif Technol 176:66–7210.1016/j.seppur.2016.11.062 ↗
35. Brambilla R, Pires GP, Dos Santos JHZ, Miranda MSL, Chornik B (2007) Octadecylsilane-modified silicas prepared by grafting and sol-gel methods. J Electron Spectrosc 156–158:413–42010.1016/j.elspec.2006.12.053 ↗
36. Sun C, Liu X, Zhou C, Wang C, Cao H (2019) Preparation and wear properties of magnetic assisted pulse electrodeposited Ni-SiC nano-coatings. Ceram Int 45:1348–135510.1016/j.ceramint.2018.07.242 ↗
37. Yang W, Xu DP, Wang JL, Yao XF, Chen J (2018) Microstructure and corrosion resistance of micro-arc oxidation plus electrostatic powder spraying composite coating on magnesium alloy. Corros Sci 136:174–17910.1016/j.corsci.2018.03.004 ↗
38. Tang H, Gao Y (2016) Preparation and characterization of hydroxyapatite containing coating on AZ31 magnesium alloy by micro-arc oxidation. J Alloys Compd 688:699–70810.1016/j.jallcom.2016.07.079 ↗
39. Gu YH, Bandopadhyay B, Chen CF, Ning CY, Guo YJ (2013) Long-term corrosion inhibition mechanism of microarc oxidation coated AZ31 Mg alloys for biomedical applications. Mater Design 46:66–7510.1016/j.matdes.2012.09.056 ↗
40. Ribeiro LH, Li HN, Bryant JE (2016) Use of a CO2-hybrid fracturing design to enhance production from unpropped-fracture networks. SPE Prod Op. https://doi.org/10.2118/173380-pa10.2118/173380-pa ↗
41. Chong KK, Grieser B, Jaripatke O, Passman A (2010) A completions roadmap to shale-play development: a review of successful approaches toward shale-play stimulation in the last two decades. SPE. https://doi.org/10.2118/130369-MS10.2118/130369-MS ↗
42. Cui LY, Zeng RC, Guan SK, Qi WC, Zhang F, Li SQ, Han EH (2017) Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity. J Alloys Compd 695:2464–247610.1016/j.jallcom.2016.11.146 ↗