journal article·2016-10

Improvement of compressive strength of lime mortar with carboxymethyl cellulose

Hui Liu, Yunliang Zhao, Changsheng Peng, Shaoxian Song, Alejandro López–Valdivieso

Journal of Materials Science· Volume 51· Issue 20
Publisher page

Abstract

Air lime mortar is an important material for restoring ancient buildings, but its application is limited because of its low compressive strength, high shrinkage, and high porosity. In this work, improvement of the compressive strength of lime mortar by adding carboxymethyl cellulose (CMC) solution has been investigated. We characterized fine particles of Ca(OH)2 and lime mortars by scanning electron microscopy, infrared spectroscopy, the adsorption capacity, and the zeta potential. The experimental results show that the addition of CMC improves the compressive strength of lime mortar. Chemisorption of CMC to Ca(OH)2 particles leads to CMC bridging Ca(OH)2 particles, which is the key to form a more compact structure according to the porosity of the lime mortar. It was found that CMC acts as a skeleton in lime mortar because of the bridging effect of the molecules and the extended conformation of the molecules at high pH, which contributes to improvement of the compressive strength of lime mortar.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Andrejkovičová S, Alves C, Velosa A, Rocha F (2015) Bentonite as a natural additive for lime and lime–metakaolin mortars used for restoration of adobe buildings. Cem Concr Compos 60:99–11010.1016/j.cemconcomp.2015.04.005 ↗
2. Lanas J, Alvarez JI (2003) Masonry repair lime–based mortars: factors affecting the mechanical behavior. Cem Concr Res 33:1867–187610.1016/S0008-8846(03)00210-2 ↗
3. Lanas J, Sirera R, Alvarez JI (2006) Study of the mechanical behavior of masonry repair lime-based mortars cured and exposed under different conditions. Cem Concr Res 36:961–97010.1016/j.cemconres.2005.12.003 ↗
4. Yang F, Zhang B, Ma Q (2010) Study of sticky rice–lime mortar technology for the restoration of historical masonry construction. Acc Chem Res 43:936–94410.1021/ar9001944 ↗
5. Wei G, Zhang H, Wang H, Fang S et al (2012) An experimental study on application of sticky rice–lime mortar in conservation of the stone tower in the Xiangji Temple. Constr Build Mater 28:624–63210.1016/j.conbuildmat.2011.09.008 ↗
6. Fang S, Zhang H, Zhang B, Li G (2014) A study of Tung–oil–lime putty–A traditional lime based mortar. Int J Adhes 48:224–23010.1016/j.ijadhadh.2013.09.034 ↗
7. Fang S, Zhang K, Zhang H, Zhang B (2015) A study of traditional blood lime mortar for restoration of ancient buildings. Cem Concr Res 76:232–24110.1016/j.cemconres.2015.06.006 ↗
8. Ventolà L, Vendrell M, Giraldez P, Merino L (2011) Traditional organic additives improve lime mortars: new old materials for restoration and building natural stone fabrics. Constr Build Mater 25:3313–331810.1016/j.conbuildmat.2011.03.020 ↗
9. Franco AP, Recio MAL, Szpoganicz B, Delgado AL, Felcman J, Mercê ALR (2007) Complexes of carboxymethylcellulose in water. Part 2. Co2+ and Al3+ remediation studies of wastewaters with Co2+, Al3+, Cu2+, VO2+ and Mo6+. Hydrometallurgy 87:178–18910.1016/j.hydromet.2006.08.013 ↗
10. Mierczynska-Vasilev A, Beattie DA (2010) Adsorption of tailored carboxymethyl cellulose polymers on talc and chalcopyrite: correlation between coverage, wettability, and flotation. Miner Eng 23:985–99310.1016/j.mineng.2010.03.025 ↗
11. Pensini E, Yip CM, O’Carroll D, Sleep BE (2013) Carboxymethyl cellulose binding to mineral substrates: characterization by atomic force microscopy–based Force spectroscopy and quartz–crystal microbalance with dissipation monitoring. J Colloid Interface Sci 402:58–6710.1016/j.jcis.2013.03.053 ↗
12. Di Bella G, Fiore V, Galtieri G, Borsellino C, Valenza A (2014) Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene). Constr Build Mater 58:159–16510.1016/j.conbuildmat.2014.02.026 ↗
13. Iucolano F, Liguori B, Colella C (2013) Fibre–reinforced lime–based mortars: a possible resource for ancient masonry restoration. Constr Build Mater 38:785–78910.1016/j.conbuildmat.2012.09.050 ↗
14. Mishra PC, Singh VK, Narang KK, Singh NK (2003) Effect of carboxymethyl -cellulose on the properties of cement. Mater Sci Eng A 357:13–1910.1016/S0921-5093(02)00832-8 ↗
15. Franco AP, Mercê ALR (2006) Complexes of carboxymethylcellulose in water. 1: Cu2+, VO2+ and Mo6+. React Funct Polym 66:667–68110.1016/j.reactfunctpolym.2005.10.018 ↗
16. Hu D, Wang H, Wang L (2016) Physical properties and antibacterial activity of quaternized chitosan/carboxymethyl cellulose blend films, LWT–Food. Sci Technol 65:398–405
17. Liang CY, Marchessult RH (1959) Infrared spectra of crystalline polysaccharides I. Hydrogen bonds in native cellulose. J Polym Sci 37:385–39510.1002/pol.1959.1203713209 ↗
18. Wach RA, Mitomo H, Nagasawa N, Yoshii F (2003) Radiation crosslinking of carboxymethylcellulose of various degree of substitution at high concentration in aqueous solutions of natural pH. Radiat Phys Chem 68:771–77910.1016/S0969-806X(03)00403-1 ↗