Mo–Cu pseudoalloys by combustion synthesis and spark plasma sintering
Source abstract
Abstract
The in situ preparation of Mo–Cu from copper molybdate in the combustion mode with the help of thermo-kinetic coupling approach using the combined magnesium/carbon reducer to provide controllable thermal conditions is reported. To determine the optimum processing parameters, the stepwise nature of reaction mechanism in the CuMoO4–Mg–C system was comprehensively explored with the help of a copper wedge quenching technique combined with X-ray diffraction and microstructural analysis of intermediate and final products. Precursor compositions of CuMoO4(I)–1.2 Mg–2.2C and CuMoO4(II)–1.5 Mg–1.6C reduced at 3 MPa pressure in a temperature range of 1350–1450 °C were found to be the optimal conditions for the combustion formation of Mo–Cu nanocomposite with spherical particles of 50–100 nm in diameter and narrow size distribution. Combustion-synthesized Mo–Cu powders were consolidated by means of spark plasma sintering (SPS) at 1000 °C and pressure of 100 MPa in vacuum. The bulk material has demonstrated twofold enhanced microhardness as compared to microhardness of mechanically alloyed specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Wang D, Xiaojia D, Pan Zh, Aokui S, Bohua D (2014) The sintering behavior of ultra-fine Mo–Cu composite powders and the sintering properties of the composite compacts. Int J Refract Metal Hard Mater 42:240–24510.1016/j.ijrmhm.2013.09.012 ↗
2. Srinivasan D, Subramanian PR (2007) Kirkendall porosity during thermal treatment of Mo–Cu nanomultilayers. Mater Sci Eng, A 459(1–2):145–15010.1016/j.msea.2007.01.037 ↗
3. Chwa SO, Klein D, Liao H, Dembinski L, Coddet Ch (2006) Temperature dependence of microstructure and hardness of vacuum plasma sprayed Cu–Mo composite coatings. Surf Coat Technol 200:5682–568610.1016/j.surfcoat.2005.08.114 ↗
4. Chen G, Wu G, Jiang L, Zhu D, Sun D (2007) Microstructure and mechanical properties of high densification Mo/Cu composites. Key Eng Mater 353:2883–288610.4028/www.scientific.net/KEM.353-358.2883 ↗
5. Ziebert C, Stueber M, Leiste H, Ulrich S, Holleck H (2011) Nanoscale PVD multilayer coatings. Encyclopedia of materials: science and technology. 1st edn. Elsevier Ltd., p 910.1016/B978-0-08-043152-9.02267-3 ↗
6. Chen G-Q, Wu G-H, Zhu D-Z, Zhang Q, Jiang L-T (2005) Microstructure and thermal and electric conductivities of high dense Mo/Cu composites. Trans Nonferr Met Soc China 15(3):110–114
7. Belay OV, Kiselev SP (2011) Molecular dynamics simulation of deformation and fracture of a Cu–Mo nanocomposite plate under uniaxial tension. Phys Mesomech 14(3–4):145–15310.1016/j.physme.2011.08.005 ↗
8. Fang F, Zhou YY, Yang W (2014) In-situ SEM study of temperature dependent tensile behavior of wrought molybdenum. Int J Refract Metal Hard Mater 42:120–12510.1016/j.ijrmhm.2013.08.012 ↗
9. Minakova V, Pachek AP, Kryachko LA, Kresanova AP, Zatovskii VG (2000) Texture formation in the cold rolling of pseudo-alloys. Powder Metall Met Ceram 39(1–2):78–8410.1007/BF02677447 ↗
10. Davis JR (2001) Copper and copper alloys. ASM International, USA
11. Wang X, Hu L, Wang H, Wang E (2011) Microstructure and properties of Mo–50%Cu alloy by mechanical milling and pressure-assisted solid state sintering. Rare Met Mater Eng 40(5):902–905
12. Martínez VP, Aguilar C, Marín J, Ordoñez S, Castro F (2007) Mechanical alloying of Cu–Mo powder mixtures and thermodynamic study of solubility. Mater Lett 61:929–93310.1016/j.matlet.2006.11.070 ↗
13. Aguilar C, Guzman D, Rojas PA, Ordoñez S, Rios R (2011) Simple thermodynamic model of the extension of solid solution of Cu–Mo alloys processed by mechanical alloying. Mater Chem Phys 128:539–54210.1016/j.matchemphys.2011.03.047 ↗
14. Aguilar C, Ordoñez S, Marín J, Castro F, Martínez V (2007) Study and methods of analysis of mechanically alloyed Cu–Mo powders. Mater Sci Eng, A 464:288–29410.1016/j.msea.2007.02.017 ↗
15. Sabooni S, Mousavi T, Karimzadeh F (2010) Mechanochemical assisted synthesis of Cu(Mo)/Al2O3 nanocomposite. J Alloy Compd 497:95–9910.1016/j.jallcom.2010.03.048 ↗
16. Sun S, Wang D, Wu Zh, Cheng Q (2011) Mechanochemical synthesis of Mo–Cu nanocomposite powders. J Alloy Compd 509:74–7710.1016/j.jallcom.2010.11.019 ↗
17. Li Y, Wang D, Sun A (2013) Preparation and characterization of Mo–Cu nanocomposite powders by chemical liquid reduction process. J Cent South Univ 20:587–59110.1007/s11771-013-1522-y ↗
18. Kang Z, Chen W, Ding B (2005) Fabrication of composite nanopowders of MoCu by sol-gel. Rare Met Mater Eng 34(6):990–993
19. Peng S, Jigui Ch, Lei W, Jingsong Zh, Yifang W, Yanbo C (2009) Preparation and characterization of Mo–15 Cu superfine powders by a gelatification-reduction process. J Alloy Compd 476:226–23010.1016/j.jallcom.2008.09.064 ↗
20. Zhao M, Wang J, Liu W, Zhou M (2009) Preparation and reduction behavior of Mo–Cu powders by sol–gel. J Phys: Conf Ser 188:1–7
21. Sun A, Wang D, Wu Z, Zan X (2010) Synthesis of ultra-fine Mo–Cu nanocomposites by coreduction of mechanical-activated CuMoO4–MoO3 mixtures at low temperature. J Alloy Compd 505:588–59110.1016/j.jallcom.2010.06.080 ↗
22. Li Z, Zhai Y (2010) Preparation of Mo60-Cu40 composite nano-powder by hydrogen reaction. Rare Met Mater Eng 39(1):6–910.1016/S1875-5372(10)60072-0 ↗
23. Minasyan T, Aydinyan S, Kharatyan S (2016) Combustion synthesis of Mo–Cu composite powders from oxide precursors with various proportions of metals. Chem J Armen 69(1–2):47–57
24. Merzhanov AG (2011) Thermally coupled SHS reactions. Int J Self Propag High Temp Synth 20(1):61–6310.3103/S1061386211010109 ↗
25. Kharatyan SL, Merzhanov AG (2012) Coupled SHS reactions as a useful tool for synthesis of materials: an overview. Int J Self Propag High Temp Synth 21(1):59–7310.3103/S1061386212010074 ↗
26. Shiryaev AA (1995) Thermodynamic of SHS: modern approach. Int J Self Propag High Temp Synth 4(4):351–362
27. Aydinyan SV, Kirakosyan HV, Kharatyan SL (2016) Cu–Mo composite powders obtained by combustion-coreduction process. Int J Refract Metal Hard Mater 54:455–46310.1016/j.ijrmhm.2015.09.002 ↗
28. Yang GL, Yu Q, Feng DK, Wang P (2015) Fabrication of functionally graded W(Mo)–Cu composites by explosive consolidation. Mater Res Innovations 19:S1–45
29. Johnson JL, German RM (2001) Role of solid-state skeletal sintering during processing of Mo–Cu composites. Metall Mater Trans A 32(3):605–61310.1007/s11661-001-0077-y ↗
30. Xinfeng S (2015) Microstructure and properties of Cu–50Mo contact materials prepared by spark plasma sintering process. Spec Cast Nonferr Alloys 11:042
31. Wang JL, Lin WS, Jiang ZW, Yang GL, Duan LH (2014) Fabrication and structure properties of fiber-structured Mo–Cu composites. Chin J Nonferr Met 24(1):174–178
32. Kumar A, Jayasankar K, Debata M, Mandal A (2015) Mechanical alloying and properties of immiscible Cu–20 wt% Mo alloy. J Alloy Compd 647:1040–104710.1016/j.jallcom.2015.06.129 ↗