Cost-effective fabrication and high-frequency response of non-ideal RC application based on 3D porous laser-induced graphene
Source abstract
Abstract
This work presents a design, fabrication, modeling and frequency response of 3D porous graphene circuit elements for a non-ideal resistor–capacitor (RC) circuit application based on a CO2 infrared laser direct writing method. The material properties of laser-induced graphene (LIG) were carefully analyzed by Raman, SEM and XRD. The room-temperature experiment of the non-ideal RC circuit from 3D porous LIG was conducted by three different electrical frequencies. The results showed that the parallel non-ideal capacitors had ~ 10% electrical response differences than with a single or a series porous graphene capacitor element. Furthermore, we demonstrated that the experiment result and the numerical simulation result of the porous graphene circuit elements were in good agreement. Moreover, the 3D porous graphene-based non-ideal RC circuit was demonstrated a 300 kHz cutoff frequency by an impedance analyzer. Compared with other methods for graphene of circuit elements system, this LIG method not only has the advantage of a one-step processing of 3D porous graphene circuit elements in air, but also provided a rapid realization of graphene-based circuit elements system on polymer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Aydogan P, Balci O, Kocabas C, Suzer S (2016) Monitoring the operation of a graphene transistor in an integrated circuit by XPS. Org Electron 37:178–18210.1016/j.orgel.2016.06.027 ↗
2. Bae SH, Lee Y, Sharma BK, Lee HJ, Kim JH, Ahn JH (2013) Graphene-based transparent strain sensor. Carbon 51:236–24210.1016/j.carbon.2012.08.048 ↗
3. Bozzi M, Pierantoni L, Bellucci S (2015) Applications of graphene at microwave frequencies. Radioengineering 24:661–66910.13164/re.2015.0661 ↗
4. Chae SH, Lee YH (2014) Carbon nanotubes and graphene towards soft electronics. Nano Converg 1:1–2610.1186/s40580-014-0015-5 ↗
5. Chen YM, He SM, Huang CH, Huang CC, Shih WP, Chu CL, Su CY (2016) Ultra-large suspended graphene as a highly elastic membrane for capacitive pressure sensors. Nanoscale 8:3555–356410.1039/C5NR08668J ↗
6. Chun S, Kim Y, Jin H, Choi E, Lee SB, Park W (2014) A graphene force sensor with pressure-amplifying structure. Carbon 78:601–60810.1016/j.carbon.2014.07.051 ↗
7. El-Kady MF, Kaner RB (2013) Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage. Nat Commun 4:1–910.1038/ncomms2446 ↗
8. Janczak D, Sloma M, Wroblewski G, Mlozniak A, Jakubowska M (2014) Screen-printed resistive pressure sensors containing graphene nanoplatelets and carbon nanotubes. Sensors (Basel) 14:17304–1731210.3390/s140917304 ↗
9. Lin J, Peng Z, Liu Y, Ruiz-Zepeda F, Ye R, Samuel EL, Tour JM (2014) Laser-induced porous graphene films from commercial polymers. Nat Commun 5:1–8
10. Luo J, Fan FR, Jiang T, Wang Z, Tang W, Zhang C, Wang ZL (2015) Integration of micro-supercapacitors with triboelectric nanogenerators for a flexible self-charging power unit. Nano Res 8:3934–394310.1007/s12274-015-0894-8 ↗
11. Maffucci A, Miano G (2014) Electrical properties of graphene for interconnect applications. Appl Sci 4:305–31710.3390/app4020305 ↗
12. Nagelli E, Naik R, Xue Y, Gao Y, Zhang M, Dai L (2013) Sensor arrays from multicomponent micropatterned nanoparticles and graphene. Nanotechnology 24(1–7):44401010.1088/0957-4484/24/44/444010 ↗
13. Peng Y, Lei J (2014) Fabrication, electrical characterization, and detection application of graphene-sheet-based electrical circuits. Nanoscale Res Lett 9(1–9):61710.1186/1556-276X-9-617 ↗
14. Ren TL, Tian H, Xie D, Yang Y (2012) Flexible graphite-on-paper piezoresistive sensors. Sensors (Basel) 12:6685–669410.3390/s120506685 ↗
15. Smith AD, Vaziri S, Niklaus F, Fischer AC, Sterner M, Delin A, Lemme MC (2013) Pressure sensors based on suspended graphene membranes. Solid-State Electron 88:89–9410.1016/j.sse.2013.04.019 ↗
16. Tao L, Wang D, Jiang S, Liu Y, Xie Q, Tian H, Ren T (2016) Fabrication techniques and applications of flexible graphene-based electronic devices. J Semicond 37(1–8):04100110.1088/1674-4926/37/4/041001 ↗
17. Wu HQ, Ling CY, Lu HM, Qian H (2013) Graphene applications in electronic and optoelectronic devices and circuits. Chin Phys B 22(1–10):09810610.1088/1674-1056/22/9/098106 ↗
18. Xue Y, Zhu L, Chen H, Qu J, Dai L (2015) Multiscale patterning of graphene oxide and reduced graphene oxide for flexible supercapacitors. Carbon 92:305–31010.1016/j.carbon.2015.04.046 ↗
19. Yang X, Liu G, Rostami M, Balandin AA, Mohanram K (2011) Graphene ambipolar multiplier phase detector. IEEE Electron Dev Lett 32:1328–133010.1109/LED.2011.2162576 ↗
20. Tao LQ, Tian H, Liu Y, Ju ZY, Pang Y, Chen YQ, Wang DY, Tian XG, Yan JC, Deng NQ, Yang Y, Ren TL (2017) An intelligent artificial throat with sound-sensing ability based on laser induced graphene. Nat Commun 8(1–8):1457910.1038/ncomms14579 ↗
21. Ye RQ, Chyan Y, Zhang JB, Li YL, Han X, Kittrell C, Tour JM (2017) Laser-induced graphene formation on wood. Adv Mater 29(1–7):170221110.1002/adma.201702211 ↗
22. Duy LX, Peng ZW, Li YL, Zhang JB, Ji YS, Tour JM (2018) Laser-induced graphene fibers. Carbon 126:472–47910.1016/j.carbon.2017.10.036 ↗
23. Singh SP, Li YL, Be’er A, Oren Y, Tour JM, Arnusch CJ (2017) Laser-induced graphene layers and electrodes prevents microbial fouling and exerts antimicrobial action. ACS Appl Mater Interf 9:18238–1824710.1021/acsami.7b04863 ↗
24. Yao Y, Kats MA, Genevet P, Yu N, Song Y, Kong J, Capasso F (2013) Broad electrical tuning of graphene-loaded plasmonic antennas. Nano Lett 13:1257–126410.1021/nl3047943 ↗
25. Zhao J, Zhang GY, Shi DX (2013) Review of graphene-based strain sensors. Chin Phys B 22(1–9):05770110.1088/1674-1056/22/5/057701 ↗
26. Zhu SE, Krishna Ghatkesar M, Zhang C, Janssen GCAM (2013) Graphene based piezoresistive pressure sensor. Appl Phys Lett 102(1–3):16190410.1063/1.4802799 ↗
27. Zhou MJ, Ren LM, Wei ZJ, Zhao HB, Hu BD, Jia YH, Shi ZJ, Fu YY, Huang R, Zhang X (2013) Graphene-based inductors: fabrication and performance. ECS Trans 52:1027–103210.1149/05201.1027ecst ↗
28. Wang ZD, Zhang QP, Peng P, Tian ZZ, Ren LM, Zhang X, Huang R, Wen JC, Fu YY (2017) Q-factors of CVD monolayer graphene and graphite inductors. J Phys D Appl Phys 50(1–6):34510310.1088/1361-6463/aa78b5 ↗
29. Tian J, Nagarkoti DS, Rajab KZ, Hao Y (2016) Graphene-based tunable non-foster circuit for VHF applications. AIP Adv 6(1–7):06520210.1063/1.4953354 ↗
30. Yogeesh MN, Parrish KN, Lee JH, Park S, Tao L, Akinwande D (2015) Towards the realization of graphene based flexible radio frequency receiver. Electronics 4(4):933–94610.3390/electronics4040933 ↗
31. Ke QQ, Wang J (2016) Graphene-based materials for supercapacitor electrodes-a review. J Materiomics 2:37–5410.1016/j.jmat.2016.01.001 ↗
32. Ajuria J, Arnaiz M, Botas C, Carriazo D, Mysyk R, Rojo T, Talyzin AV, Goikolea E (2017) Graphene-based lithium ion capacitor with high gravimetric energy and power densities. J Power Sources 363:422–42710.1016/j.jpowsour.2017.07.096 ↗
33. Kwak H, Kim S, Kim J (2004) Nonlinear dynamic analysis of RC frames using cyclic moment-curvature relation. Struct Eng Mech 17:357–37810.12989/sem.2004.17.3_4.357 ↗
34. Ortega R, Shi BE (2014) A note on passivity of nonlinear RL and RC circuit. IFAC Proc 35:31–3510.3182/20020721-6-ES-1901.00255 ↗