Recent trends in coating processes on various AISI steel substrates: A review
Source abstract
Abstract
Various spraying techniques have been used to apply engineered coatings on different industrial parts and components. Enhancing the properties of coated components for particular uses requires a surface treatment of thermally assisted as-sprayed coatings. In this study, we provide a study of various coating techniques and a thorough overview of the complexes in different AISI steels` corrosion, erosion, and wear behaviour. In-depth analysis and discussion are provided on the impact of processing techniques, microstructure, and alloying components on the behaviour of surface deterioration. We emphasize the underlying processes and synergy between the various degradation paths and point out significant information gaps in individual publications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Kumar N, Choubey VK (2023) Comparative evaluation of oxidation resistance of detonation gun-sprayed Al2O3–40%TiO2 coating on nickel-based superalloys at 800 °C and 900 °C. High Temp Corros Mater 99:359–373. https://doi.org/10.1007/s11085-023-10157-310.1007/s11085-023-10157-3 ↗
2. Mohan, S., & Mohan, A. (2015). Wear, friction and prevention of tribo-surfaces by coatings/nanocoatings. In Anti-Abrasive Nanocoatings (pp. 3–22). Woodhead Publishing.10.1016/B978-0-85709-211-3.00001-7 ↗
3. Qu J, Blau PJ, Jolly BC (2007) Tribological properties of stainless steels treated by colossal carbon supersaturation. Wear 263(2007):719–726. https://doi.org/10.1016/j.wear.2006.12.04910.1016/j.wear.2006.12.049 ↗
4. Lavvafi H, Lewandowski ME, Schwam D, Lewandowski JJ (2017) Effects of surface laser treatments on microstructure, tension, and fatigue behavior of AISI 316LVM biomedical wires. Mater Sci Eng, A 688:101–11310.1016/j.msea.2017.01.083 ↗
5. Sanjari M, Hadadzadeh A, Pirgazi H, Shahriari A, Shalchi Amirkhiz B, Kestens LA, Mohammadi M (2020) Selective laser melted stainless steel CX: role of built orientation on microstructure and micro-mechanical properties. Mater Sci Eng A 786:139365. https://doi.org/10.1016/j.msea.2020.13936510.1016/j.msea.2020.139365 ↗
6. Liang D, Hure J, Courcelle A, ElShawish S, Tanguy B (2021) A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel. Acta Mater 204:116482. https://doi.org/10.1016/j.actamat.2020.11648210.1016/j.actamat.2020.116482 ↗
7. Paccou E, Tanguy B, Legros M (2020) Irradiation-assisted stress corrosion cracking susceptibility and mechanical properties related to irradiation-induced microstructures of 304L austenitic stainless steel. J Nucl Mater 528:151880. https://doi.org/10.1016/j.jnucmat.2019.15188010.1016/j.jnucmat.2019.151880 ↗
8. Kim HJ, Hwang SY, Lee CH, Juvanon P (2003) Assessment of wear performance of flame sprayed and fused Ni-based coatings. Surf Coat Technol 172(2–3):262–26910.1016/S0257-8972(03)00348-7 ↗
9. Elsheikh AH, Yu J, Sathyamurthy R, Tawfik MM, Shanmugan S, Essa FA (2020) Improving the tribological properties of AISI M50 steel using Sns/Zno solid lubricants. J Alloy Compd 821:15349410.1016/j.jallcom.2019.153494 ↗
10. Ibrahim AMM, Omer MA, Das SR, Li W, Alsoufi MS, Elsheikh A (2022) Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alex Eng J 61(12):10925–1093810.1016/j.aej.2022.04.029 ↗
11. Essa FA, Elsheikh AH, Yu J, Elkady OA, Saleh B (2021) Studies on the effect of applied load, sliding speed and temperature on the wear behavior of M50 steel reinforced with Al2O3 and/or graphene nanoparticles. J Market Res 12:283–303
12. Das A, Padhan S, Das SR, Alsoufi MS, Ibrahim AMM, Elsheikh A (2021) Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals 11(12):193110.3390/met11121931 ↗
13. Padhan S, Das SR, Das A, Alsoufi MS, Ibrahim AMM, Elsheikh A (2022) Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials 15(7):236810.3390/ma15072368 ↗
14. Wagri NK, Jain NK, Petare A, Das SR, Tharwan MY, Alansari A, Elsheikh A (2023) Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials 16(2):66810.3390/ma16020668 ↗
15. Essa FA, Yu J, Elsheikh AH, Tawfik MM (2019) A new M50 matrix composite sintered with a hybrid Sns/Zno nanoscale solid lubricants: an experimental investigation. Mater Res Express 6(11):11652310.1088/2053-1591/ab4675 ↗
16. Chaturvedi M, Subbiah AV, Tharwan MY, Al Sofyani S, Kachinskiy V, Radder S, Elsheikh AH (2022) Welding of low carbon steel tubes using magnetically impelled arc butt welding: Experimental investigation and characterization. Metals 12(11):196510.3390/met12111965 ↗
17. Ahmadein M, El-Kady OA, Mohammed MM, Essa FA, Alsaleh NA, Djuansjah J, Elsheikh AH (2021) Improving the mechanical properties and coefficient of thermal expansion of molybdenum-reinforced copper using powder metallurgy. Mater Res Express 8(9):09650210.1088/2053-1591/ac209a ↗
18. Mohammed MM, Alrasheedi NH, El-Kady OA, Djuansjah J, Essa FA, Elsheikh AH (2023) Impact of using tungsten, cobalt, and aluminum additives on the tribological and mechanical properties of iron composites. Crystals 13(3):39510.3390/cryst13030395 ↗
19. Kumar N, Choubey VK (2023) Experimental investigation on hot corrosion, oxidation and microstructure of WC based cermet HVOF coating. High Temp Corros Mater. https://doi.org/10.1007/s11085-023-10179-x10.1007/s11085-023-10179-x ↗
20. Stokes J, Looney L (2001) HVOF system definition to maximise the thickness of formed components. Surf Coat Technol 148(1):18–2410.1016/S0257-8972(01)01272-5 ↗
21. Kumar N, Choubey VK (2023) Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour & microstructure characteristics at 650 degree celsius. Surf Coat Technol 469:12981210.1016/j.surfcoat.2023.129812 ↗
22. Ham GS, Kreethi R, Kim HJ, Yoon SH, Lee KA (2021) Effects of different HVOF thermal sprayed cermet coatings on tensile and fatigue properties of AISI 1045 steel. J Mater Res Technol 15:6647–665810.1016/j.jmrt.2021.11.102 ↗
23. Mishra, N. K., Kumar, N., & Mishra, S. B. (2014). Hot corrosion behaviour of detonation gun sprayed Al2O3–40TiO2 coating on nickel based superalloys at 900 °C. Indian J Mater Sci.10.1155/2014/453607 ↗
24. Kumar, N., & Choubey, V. K. (2021). Oxidation performance of Al2O3–40% TiO2 coating on Nickel and Cobalt based superalloys at 800 0 C. AIJR Abstracts, 26.
25. Rodriguez SG, Torres B, López AJ, Ram EOJ (2019) Characterization and mechanical properties of stainless steel coatings deposited by HVOF on ZE41 magnesium alloy. Surf Coat Tech 359:73–84. https://doi.org/10.1016/j.surfcoat.2018.12.05610.1016/j.surfcoat.2018.12.056 ↗
26. Rodriguez SG, Torres B, López AJ, Ram EOJ (2016) 316L stainless steel coatings on ZE41 magnesium alloy using HVOF thermal spray for corrosion protection. Surf Coat Tech 287:9–19. https://doi.org/10.1016/j.surfcoat.2015.12.07510.1016/j.surfcoat.2015.12.075 ↗
27. Kumar N, Kumar V, Mishra SB (2018) Oxidation and hot corrosion performance coating on nickel of Al2 based O3–40% TiO superalloys. Adv Manuf Mater Sci Sel Extend Papers ICAMMS 2018:349
28. Prengel HG, Pfouts WR, Santhanam AT (1998) State of the art in hard coatings for carbide cutting tools. Surf Coat Technol 102(3):183–19010.1016/S0257-8972(96)03061-7 ↗
29. De Damborenea J, Navas C, García J, Arenas M, Conde A (2007) Corrosion–erosion of TiN-PVD coatings in collagen and cellulose meat casing. Surf Coat Technol 201:5751–5757. https://doi.org/10.1016/j.surfcoat.2006.10.00910.1016/j.surfcoat.2006.10.009 ↗
30. Chun SY, Lee SJ, Lee CH, Chayahara A (2005) Nanometer-ranged metallic coatings by noble pulsed cathodic arc deposition. Mater Process Adv Electromagn Energy Sour 1:83–86
31. Annavarapu RK, Kim S, Wang M, Hart AJ, Sojoudi H (2019) Explaining evaporation-triggered wetting transition using local force balance model and contact line-fraction. Sci Rep 9(1):40510.1038/s41598-018-37093-6 ↗
32. Sojoudi H, Kim S, Zhao H, Annavarapu RK, Mariappan D, Hart AJ, McKinley GH, Gleason KKS (2017) Control of nanoporous microstructures by iCVD coating of carbon nanotubes. ACS Appl Mater Interfaces 9:43287–43299. https://doi.org/10.1021/acsami.7b1371310.1021/acsami.7b13713 ↗
33. Nemani SK, Barrier SH (2018) Performance of CVD graphene films using a facile P3HT thin film optical transmission test. J Nanomater 12:9681432. https://doi.org/10.1155/2018/968143210.1155/2018/9681432 ↗
34. Sojoudi H, Nemani SK, Mullin K, Wilson MG, Al-Adwani H, Lababidi HM, Gleason KK (2019) A micro/nanoscale approach for studying scale formation and developing of scale-resistant surfaces. ACS Appl Mater Interfaces 11:7330–7337. https://doi.org/10.1021/acsami.8b1852310.1021/acsami.8b18523 ↗
35. Tavakoli MM, Azzellino G, Hempel M, Lu AY, Martin-Martinez FJ, Zhao J, Kong J (2020) Synergistic roll-to-roll transfer and doping of CVD-graphene using parylene for ambient-stable and ultra-lightweight photovoltaics. Adv Func Mater 30(31):200192410.1002/adfm.202001924 ↗
36. Priyan MS, Santhosh K, Sivaraman MA, Subith S, Sunil M (2016) Wear performance of Ti based powders coating on SS 304 by PVD method. J Mater Sci Surf Eng 4(3):372–375
37. Yang X, Zhang R, Pu J, He Z, Xiong L (2021) 2D graphene and h-BN layers application in protective coatings. Corros Rev 39(2):93–10710.1515/corrrev-2020-0080 ↗
38. Dehghanghadikolaei A, Namdari N, Mohammadian B, Fotovvati BJJOS (2018) Additive manufacturing methods: a brief overview. J Sci Eng Res 5(8):123–131
39. Dehghanghadikolaei A, Ansary J, Ghoreishi R (2018) Sol-gel process applications: A mini-review. Proc Nat Res Soc 2:02008. https://doi.org/10.11605/j.pnrs.20180200810.11605/j.pnrs.201802008 ↗
40. Thorpe M, Richter H (1992) A pragmatic analysis and comparison of HVOF processes. J Therm Spray Technol 1:161–17010.1007/BF02659017 ↗
41. Tomiguchi, A., Sochi, Y., & Matsubara, Y. (1998, May). Advantages of induction heat treatment in the application of self-fluxing alloy to boiler tubes. In ITSC 1998 (pp. 1061–1065). ASM International.10.31399/asm.cp.itsc1998p1061 ↗
42. Shrestha S, Hodgkiess T, Neville A (2005) Erosion-corrosion behaviour of high-velocity oxy-fuel Ni-Cr-Mo-Si-B coatings under high-velocity seawater jet impingement. Wear 259:208–218. https://doi.org/10.1016/j.wear.2005.01.03810.1016/j.wear.2005.01.038 ↗
43. Antonov M, Surzenkov A, Hussainova I, Goljandin D, Mikli V (2012) Effect of basalt addition on tribological performance of FeCrSiB HVOF coatings. Est J Eng 18(3):21110.3176/eng.2012.3.06 ↗
44. Kalashnikova IA, Kalashnikov AV (2010) Weld Int 24:301–30310.1080/09507110903320048 ↗
45. Bulloch J, Callagy A (1999) An in situ wear-corrosion study on a series of protective coatings in large induced draft fans. Wear 233:284–292. https://doi.org/10.1016/S0043-1648(99)00229-X10.1016/S0043-1648(99)00229-X ↗
46. Skarvelis P, Papadimitriou G (2009) Plasma transferred arc composite coatings with self lubricating properties, based on Fe and Ti sulfides: Microstructure and tribological behavior. Surf Coat Technol 203:1384–1394. https://doi.org/10.1016/j.surfcoat.2008.11.01010.1016/j.surfcoat.2008.11.010 ↗
47. Goebel JA, Pettit FS, Gowar GW (1973) Mechanisms for the hot corrosion of nickel-base alloys. Metall Trans 4:26110.1007/BF02649626 ↗
48. Yadav, S. K., Verma, A. S., & Gupta, V. (2015). Role of coating in improving high temperature oxidation of steel.
49. Bressers J, Arzt E (1986) High temperature low cycle fatigue of inconel MA 6000. High Temp Alloys Gas Turb Other Appl 12:1067–1080
50. Kubarych, K. G., Boone, D. H., & Duncan, R. L. (1984, June). A long-term field test of advanced gas turbine airfoil coatings under a severe industrial environment. In Turbo expo: power for land, sea, and air (Vol. 79504, p. V005T11A007). American Society of Mechanical Engineers.10.1115/84-GT-277 ↗
51. De Menezes AWA, de Souza IA, de Carvalho Costa TH, de Carvalho Costa TC, de Sousa RRM, Nascimento RM, Feitor MC (2022) Study of the deposition of hydroxyapatite by plasma electrolytic oxidation (PEO) in stainless steel AISI 316LVM samples. J Mater Res Technol 18:1578–158910.1016/j.jmrt.2022.03.011 ↗
52. Bidabadi MHS, Siripongsakul T, Thublaor T, Wiman P, Chandra-ambhorn S (2022) Oxidation and Cr-evaporation behavior of MnCo based spinel and composite coated AISI 430 steel. Surf Coat Technol 434:12817610.1016/j.surfcoat.2022.128176 ↗
53. Chaudhari TS, Pise AS, Mahato AK, Satyam K (2022) Study on the scale formation of AISI–1018 carbon steel in walking beam steel reheat furnace. Mater Today Proc 62:3916–392110.1016/j.matpr.2022.04.551 ↗
54. Silva JL, Carneiro ARC, Castro GM, MartinsNunes EH, de Freitas V, Lins C, Junqueira RMR (2022) Influence of temperature on the electrochemical coloration process and properties of the AISI 304 and 430 colored stainless steel. J Market Res 16:102–109. https://doi.org/10.1016/j.jmrt.2021.11.11710.1016/j.jmrt.2021.11.117 ↗
55. Spotorno R, Paravidino D, Delsante S, Piccardo P (2022) Volatilization of chromium from AISI 441 stainless steel: Time and temperature dependence. Surf Coat Technol 433:128125. https://doi.org/10.1016/j.surfcoat.2022.12812510.1016/j.surfcoat.2022.128125 ↗
56. Chyrkin A, Gunduz KO, Asokan V, Svensson JE, Froitzheim J (2022) High temperature oxidation of AISI 441 in simulated solid oxide fuel cell anode side conditions. Corros Sci 203:11033810.1016/j.corsci.2022.110338 ↗
57. Norouzi A, Soltanieh M, Rastegari S (2022) An electrophoretic co-deposition of metal oxides followed by in-situ copper manganese spinel synthesis on AISI-430 for application in SOFC interconnects. Int J Hydrogen Energy 47(31):14346–14360. https://doi.org/10.1016/j.ijhydene.2022.02.18210.1016/j.ijhydene.2022.02.182 ↗
58. Singh D, Cemin F, Jimenez MJM, Vinícius A, Alvarez F, Orlov D, Figueroa CA, Hosmani SS (2022) High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel. Appl Surf Sci 581:152437. https://doi.org/10.1016/j.apsusc.2022.15243710.1016/j.apsusc.2022.152437 ↗
59. Chang C, Yan X, Deng Z, Lu B, Bolot R, Gardan J, Deng S, Chemkhi M, Liu M, Liao H (2022) Heat treatment induced microstructural evolution, oxidation behavior and tribological properties of Fe-12Cr-9Ni-2Al steel (CX steel) prepared using selective laser melting. Surf Coat Technol 429:12798210.1016/j.surfcoat.2021.127982 ↗
60. Ma Z, Shen T, Wang Z, Zhou T, Chang H, Jin P, Liu C (2022) Improving the oxidation resistance of SIMP steel to liquid Pb-Bi eutectic by shot peening treatments. Appl Surf Sci 578:15191010.1016/j.apsusc.2021.151910 ↗
61. Vedaei-Sabegh A, Morin J-B, Jahazi M (2022) Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots. Mater Chem Phys 275:125269. https://doi.org/10.1016/j.matchemphys.2021.12526910.1016/j.matchemphys.2021.125269 ↗
62. Dhillon SS, Chawla V, Singh G (2022) Analysis of plasma gun sprayed coatings on SS-304 steel to evaluate cyclic oxidation and hot corrosion. Mater Today Proc 50:1580–159010.1016/j.matpr.2021.09.120 ↗
63. Wang X, Zhang M, Zou Z, Song S, Han F, Qu S (2006) In situ production of Fe–TiC surface composite coatings by tungsten-inert gas heat source. Surf Coat Technol 200(20–21):6117–6122. https://doi.org/10.1016/j.surfcoat.2005.09.02110.1016/j.surfcoat.2005.09.021 ↗
64. Xinhong W, Zengda Z, Sili S, Shiyao Q (2006) Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding. Wear 260(1–2):25–29. https://doi.org/10.1016/j.wear.2005.03.01810.1016/j.wear.2005.03.018 ↗
65. Shen Q, Li Y, Zhao J, Liu D, Yang Y (2021) Effects of annealing on the microstructure and wear resistance of laser cladding CrFeMoNbTiW high-entropy alloy coating. Crystals 11(9):109610.3390/cryst11091096 ↗
66. Zhao C, Xing X, Guo J, Shi Z, Zhou Y, Ren X, Yang Q (2019) Micro-properties of (Nb, M) C carbide (M= V, Mo, W and Cr) and precipitation behavior of (Nb, V) C in carbide reinforced coating. J Alloy Compd 788:852–86010.1016/j.jallcom.2019.02.284 ↗
67. Dyuti S, Mridha S, Shaha SK (2011) Wear behavior of modified surface layer produced by TIG melting of preplaced Ti powder in nitrogen environment. Adv Mater Res 264:1427–143210.4028/www.scientific.net/AMR.264-265.1427 ↗
68. Wang L, Tian H, Gao H, Xie F, Zhao K, Cui Z (2019) “Electrochemical and XPS analytical investigation of the accelerative effect of bicarbonate/carbonate ions on AISI 304 in alkaline environment. Appl Surf Sci 492:792–807. https://doi.org/10.1016/j.apsusc.2019.06.19810.1016/j.apsusc.2019.06.198 ↗
69. Tian HL, Wei SC, Chen YX, Tong H, Liu Y, Xu BS (2013) Surface remelting treated high velocity arc sprayed FeNiCrAlBRE coating by tungsten inert gas. Phys Procedia 50:322–327. https://doi.org/10.1016/j.phpro.2013.11.05110.1016/j.phpro.2013.11.051 ↗
70. Sharifitabar M, Vahdati Khaki J, Haddad Sabzevar M, Sharifitabar M, Vahdati Khaki J, Haddad Sabzevar M, Sharifitabar M, Vahdati Khaki J, Haddad Sabzevar M, Sharifitabar M, Vahdati Khaki J, Haddad Sabzevar M (2016) Microstructure and wear resistance of in-situ TiC–Al2O3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding. Surf Coat Technol 285:47–56. https://doi.org/10.1016/j.surfcoat.2015.11.01910.1016/j.surfcoat.2015.11.019 ↗
71. Ya-long Li, Tian-shuna D, Guo-lua Li, Wang Hai-doub Fu, Bin-Guoa Z-D, Xiu-kai Z (2018) Microstructure and mechanical property of Ni-based thick coating remelted by gas tungsten arc. Vacuum 155(2018):260–269. https://doi.org/10.1016/j.vacuum.2018.05.05310.1016/j.vacuum.2018.05.053 ↗
72. Guo-lu Li, Ya-long Li, Dong Tian-shun Fu, Bin-Guo W-D, Xiao-dong Z, Xiu-kai Z (2018) Microstructure and interface characteristics of NiCrBSi thick coating remelted by TIG process. Vacuum 156(2018):440–448. https://doi.org/10.1016/j.vacuum.2018.07.02010.1016/j.vacuum.2018.07.020 ↗
73. Dong, H. (Ed.). (2010). Surface engineering of light alloys: Aluminium, magnesium and titanium alloys.10.1533/9781845699451 ↗
74. Liu J, Zhang J, Liu P, Deng L, Zhang S (2020) Microstructure and wear behaviour of laser-cladded γ-Niss/Mo2Ni3Si coating. Surf Eng 36(12):1270–127710.1080/02670844.2019.1586301 ↗
75. Guo-lu L, Jing-min Y, Tian-shun D, Xiang-wei Z, Bin-guo F, Jiadong S (2020) Wear resistance under different temperatures of NiCr-Cr 3 C 2 coating remelted by tungsten inert gas arc. J Mater Eng Perform 29:8013–802410.1007/s11665-020-05254-2 ↗
76. Wang PZ, Yang YS, Ding G, Qu JX, Shao HS (1997) Laser cladding coating against erosion-corrosion wear and its application to mining machine parts. Wear 209(1–2):96–10010.1016/S0043-1648(97)00018-5 ↗
77. Herrera Y, Grigorescu IC, Ramirez J, Di Rauso C, Staia MH (1998) Microstructural characterization of vanadium carbide laser clad coatings. Surf Coat Technol 108:308–31110.1016/S0257-8972(98)00662-8 ↗
78. Li Q, Lei T, Chen W (1999) Microstructural characterization of laser-clad TiCp-reinforced Ni–Cr–B–Si–C composite coatings on steel. Surf Coat Technol 114(2–3):278–284. https://doi.org/10.1016/S0257-8972(99)00055-910.1016/S0257-8972(99)00055-9 ↗
79. Wang K, Zhang Q, Sun M, Wei X, Zhu Y (2001) Rare earth elements modification of laser-clad nickel-based alloy coatings. Appl Surf Sci 174(3–4):191–200. https://doi.org/10.1016/S0169-4332(01)00017-410.1016/S0169-4332(01)00017-4 ↗
80. Yang S, Liu W, Zhong M, Wang Z, Kokawa H (2005) Fabrication of in-situ synthesized TiC particles reinforced composite coating by powder feeding laser cladding. J Mater Sci 40(9–10):2751–275410.1007/s10853-005-2122-5 ↗
81. Navas C, Conde A, Cadenas M, Damborenea J (2006) Tribological properties of laser clad Stellite 6 coatings on steel substrates. Surf Eng 22(1):26–34. https://doi.org/10.1179/174329406X8494910.1179/174329406X84949 ↗
82. Xu J, Liu W, Zhong M (2006) Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding. Surf Coat Technol 200(14–15):4227–4232. https://doi.org/10.1016/j.surfcoat.2005.01.03610.1016/j.surfcoat.2005.01.036 ↗
83. Zhu QJ, Wang XH, Qu SY, Zou ZD (2008) Amorphization of Fe38Ni30Si16B14V2 surface layers by laser cladding. Trans Nonferrous Metals Soc China 18(2):270–27310.1016/S1003-6326(08)60047-3 ↗
84. Wang X, Zhang M, Liu X, Qu S, Zou Z (2008) Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding. Surf Coat Technol 202(15):3600–3606. https://doi.org/10.1016/j.surfcoat.2007.12.03910.1016/j.surfcoat.2007.12.039 ↗
85. Qu S, Wang X, Zhang M, Zou Z (2008) Microstructure, and wear properties of Fe–TiC surface composite coating by laser cladding. J Mater Sci 43(5):1546–155110.1007/s10853-007-2350-y ↗
86. Ye X, Ma M, Liu W, Li L, Zhong M, Liu Y, Wu Q (2011) Synthesis and characterization of high-entropy alloy FeCoNiCuCr by laser cladding. Adv Mater Sci Eng 2011:1–7. https://doi.org/10.1155/2011/48594210.1155/2011/485942 ↗
87. Zhou S, Dai X, Zheng H (2013) Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding. Opt Laser Technol 44(1):190–197. https://doi.org/10.1016/j.optlastec.2011.06.01710.1016/j.optlastec.2011.06.017 ↗
88. Wang XH, Pan XN, Du BS, Li S (2013) Production of in situ TiB2+TiC/Fe composite coating from precursor containing B4C-TiO2-Al powders by laser cladding. Trans Nonferrous Metals Soc China 23(6):1689–1693. https://doi.org/10.1016/S1003-6326(13)62649-710.1016/S1003-6326(13)62649-7 ↗
89. Ayyagari A, Hasannaeimi V, Grewal HS, Arora H, Mukherjee S (2018) Corrosion, erosion and wear behavior of complex concentrated alloys: A review. Metals 8(8):60310.3390/met8080603 ↗
90. Wiman P, Thublaor T, Rojhirunsakool T, Bidabadi MHS, Yang Z-G, Siripongsakul T, Chandra-ambhorn W, Chandra-ambhorn S (2022) Corrosion behaviour of AISI 430 stainless steel in O2–40%H2O at 800 °C. Corros Sci 56:110323. https://doi.org/10.1016/j.corsci.2022.11032310.1016/j.corsci.2022.110323 ↗
91. Pineda F, Walczak M, Vilchez F, Guerra C, Escobar R, Sancy M (2022) “Evolution of corrosion products on ASTM A36 and AISI 304L steels formed in exposure to molten NaNO3–KNO3 eutectic salt: Electrochemical study. Corros Sci 196:110047. https://doi.org/10.1016/j.corsci.2021.11004710.1016/j.corsci.2021.110047 ↗
92. Yong Xu, Huang Y, Cai F, Dongzhu Lu, Wang X (2022) Study on corrosion behavior and mechanism of AISI 4135 steel in marine environments based on field exposure experiment. Sci Total Environ 830:154864. https://doi.org/10.1016/j.scitotenv.2022.15486410.1016/j.scitotenv.2022.154864 ↗
93. Bozkurt YB, Kovac H, Yetim AF, Çelik A (2022) Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel. Surf Coat Technol 440:128444. https://doi.org/10.1016/j.surfcoat.2022.12844410.1016/j.surfcoat.2022.128444 ↗
94. López-Ojeda L, Vargas-Gutiérrez G (2022) High wear resistance and better pitting corrosion resistance of AISI 316L stainless steel by a self-protective oxy-nitrocarburizing paste. J Mater Res Technol 16:1803–1813. https://doi.org/10.1016/j.jmrt.2021.12.11810.1016/j.jmrt.2021.12.118 ↗
95. Cruz-Hernández VL, García-Hernández R, López-Morelos VH, García-Rentería MA, González-Sánchez J (2022) Intergranular corrosion of AISI 347 stainless steel welds obtained under electromagnetic interaction of low intensity. Mater Lett 312:131679. https://doi.org/10.1016/j.matlet.2022.13167910.1016/j.matlet.2022.131679 ↗
96. Wang W, Tamakloe S, Deng Z, Li L, Cai W, Lu K (2022) Effects of processing temperature on the corrosion and tribocorrosion resistance of perhydropolysilazane-derived coatings on AISI 304 steel. Surf Coat Technol 439:12846310.1016/j.surfcoat.2022.128463 ↗
97. Liu Q, Qian J, Barker R, Wang C, Pessu ANF (2022) Effect of thermal cycling on the corrosion behaviour of stainless steels and Ni-based alloys in molten salts under air and argon. Sol Energy 238:248–257. https://doi.org/10.1016/j.solener.2022.04.04110.1016/j.solener.2022.04.041 ↗
98. Caraguay SJ, Pereira TS, Giacomelli RO, Cunha A, Pereira M, Xavier FA (2022) “The effect of laser surface textures on the corrosion resistance of epoxy coated steel exposed to aggressive environments for offshore applications. Surf Coat Technol 437:12837. https://doi.org/10.1016/j.surfcoat.2022.12837110.1016/j.surfcoat.2022.128371 ↗
99. Yanardağ T, Danışman Ş, Maşlak M (2023) Corrosion performance of the Zn coatings on AISI 1212 mild steel in 0.5 M NaCl medium: influence of thicknesses of metallic film. Protect Metals Phys Chem Surf 6:1–12
100. Archard JF (1953) Contact and rubbing of flat surfaces. J Appl Phys 24:981–98810.1063/1.1721448 ↗