Laser-modified Fe–30Mn surfaces with promoted biodegradability and biocompatibility toward biological applications
Source abstract
Abstract
FeMn alloy is a promising biodegradable metal because of its comparable mechanical properties and biodegradability, but the inadequate degradation and poor surface performance are still an important limitation of its development. In this work, laser surface modification was used to tailor the surface properties of Fe–30Mn alloy. After irradiation using continuous, nanosecond and femtosecond lasers, the Fe–30Mn surface characteristics were investigated, and the effect of surface structure on the corrosion behavior and antimicrobial activity was discussed. A micro-pattern of laser surface melting was obtained on Fe–30Mn by continuous laser and nanosecond laser irradiation, resulting in high roughness values as well as forming oxides on the surface. In contrast, a periodic nanostructure was generated on surface by femtosecond lasers, leading to a great increase in specific surface area. Compared with the others, the femtosecond laser-induced periodic nanostructure surface exhibits a significant improvement of the actual biodegradation rate after 30-day immersion. The antibacterial experimental results demonstrate that bacteria proliferation is not only affected by surface roughness, but also by surface flatness and surface structures. The results imply a great potential in local or complete surface characteristic of medical implants for functionalization by the flexible positioning of the laser beam.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Magnesium Alloys: Properties and Applications · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Zheng YF, Gu XN, Witte F (2014) Biodegradable metals. Mater Sci Eng R Rep 77:1–34. https://doi.org/10.1016/j.mser.2014.01.00110.1016/j.mser.2014.01.001 ↗
2. Hanzi AC, Gerber I, Schinhammer M, Loffler JF, Uggowitzer PJ (2010) On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg–Y–Zn alloys. Acta Biomater 6:1824–1833. https://doi.org/10.1016/j.actbio.2009.10.00810.1016/j.actbio.2009.10.008 ↗
3. Qin Y, Wen P, Guo H et al (2019) Additive manufacturing of biodegradable metals: current research status and future perspectives. Acta Biomater 98:3–22. https://doi.org/10.1016/j.actbio.2019.04.04610.1016/j.actbio.2019.04.046 ↗
4. Li HF, Xie XH, Zheng YF et al (2015) Corrigendum: development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg Ca and Sr. Sci Rep 5:12190. https://doi.org/10.1038/srep1219010.1038/srep12190 ↗
5. Li H, Yang H, Zheng Y, Zhou F, Qiu K, Wang X (2015) Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr. Mater Des 83:95–102. https://doi.org/10.1016/j.matdes.2015.05.08910.1016/j.matdes.2015.05.089 ↗
6. Chen Y, Xu Z, Smith C, Sankar J (2014) Recent advances on the development of magnesium alloys for biodegradable implants. Acta Biomater 10:4561–4573. https://doi.org/10.1016/j.actbio.2014.07.00510.1016/j.actbio.2014.07.005 ↗
7. Li JN, Cao P, Zhang XN, Zhang SX, He YH (2010) In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy. J Mater Sci 45:6038–6045. https://doi.org/10.1007/s10853-010-4688-910.1007/s10853-010-4688-9 ↗
8. Peuster HMJ (2001) A novel approach to temporary stenting: degradable cardiovascular stents produced from corrodible metal-results 6–18 months after implantation into New Zealand white rabbits. Heart 86:563–569. https://doi.org/10.1136/heart.86.5.56310.1136/heart.86.5.563 ↗
9. Peuster M, Hesse C, Schloo T, Fink C, Beerbaum P, Schnakenburg CV (2006) Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta. Biomaterials 27:4955–4962. https://doi.org/10.1016/j.biomaterials.2006.05.02910.1016/j.biomaterials.2006.05.029 ↗
10. Zhang E, Chen H, Shen F (2010) Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial. J Mater Sci Mater Med 21:2151–2163. https://doi.org/10.1007/s10856-010-4070-010.1007/s10856-010-4070-0 ↗
11. Zhu S, Huang N, Xu L, Zhang Y, Liu H, Sun H, Leng Y (2009) Biocompatibility of pure iron: In vitro assessment of degradation kinetics and cytotoxicity on endothelial cells. Mater Sci Eng C 29:1589–1592. https://doi.org/10.1016/j.msec.2008.12.01910.1016/j.msec.2008.12.019 ↗
12. Martínez J, Aurelio G, Cuello G, Cotes SM, Fernández Guillermet A, Desimoni J (2005) Mössbauer spectroscopy, dilatometry and neutron diffraction detection of the ɛ-phase fraction in Fe–Mn shape memory alloys. Hyperfine Interact 161:221–227. https://doi.org/10.1007/s10751-005-9194-010.1007/s10751-005-9194-0 ↗
13. Liu B, Zheng YF, Ruan LJ (2011) In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material. Mater Lett 65:540–543. https://doi.org/10.1016/j.matlet.2010.10.06810.1016/j.matlet.2010.10.068 ↗
14. Gorejová R, Haverová L, Oriňaková R, Oriňak A, Oriňak M (2018) Recent advancements in Fe-based biodegradable materials for bone repair. J Mater Sci 54:1913–1947. https://doi.org/10.1007/s10853-018-3011-z10.1007/s10853-018-3011-z ↗
15. Breur G, Jones-Hall Y, Nauman E, Stanciu L, Heiden M, Traverson M (2018) In vivo evaluation of biodegradability and biocompatibility of Fe30Mn alloy. Vet Comp Orthop Traumatol 31:010–016. https://doi.org/10.3415/vcot-17-06-008010.3415/vcot-17-06-0080 ↗
16. Hermawan H, Purnama A, Dube D, Couet J, Mantovani D (2010) Fe–Mn alloys for metallic biodegradable stents: degradation and cell viability studies. Acta Biomater 6:1852–1860. https://doi.org/10.1016/j.actbio.2009.11.02510.1016/j.actbio.2009.11.025 ↗
17. Koyama M, Sawaguchi T, Tsuzaki K (2011) Work hardening and uniform elongation of an ultrafine-grained Fe–33Mn binary alloy. Mater Sci Eng A 530:659–663. https://doi.org/10.1016/j.msea.2011.10.03810.1016/j.msea.2011.10.038 ↗
18. Wang T, Wan Y, Liu Z (2016) Fabrication of hierarchical micro/nanotopography on bio-titanium alloy surface for cytocompatibility improvement. J Mater Sci 51:9551–9561. https://doi.org/10.1007/s10853-016-0219-710.1007/s10853-016-0219-7 ↗
19. Demir AG, Previtali B, Lecis N (2013) Development of laser dimpling strategies on TiN coatings for tribological applications with a highly energetic Q-switched fibre laser. Opt Laser Technol 54:53–61. https://doi.org/10.1016/j.optlastec.2013.05.00710.1016/j.optlastec.2013.05.007 ↗
20. De Giorgi C, Furlan V, Demir AG, Tallarita E, Candiani G, Previtali B (2017) Laser micropolishing of AISI 304 stainless steel surfaces for cleanability and bacteria removal capability. Appl Surf Sci 406:199–211. https://doi.org/10.1016/j.apsusc.2017.02.08310.1016/j.apsusc.2017.02.083 ↗
21. Furlan V, Biondi M, Demir AG, Pariani G, Previtali B, Bianco A (2017) Sub-micrometric surface texturing of AZ31 Mg-alloy through two-beam direct laser interference patterning with a ns-pulsed green fiber laser. Appl Surf Sci 423:619–629. https://doi.org/10.1016/j.apsusc.2017.06.13810.1016/j.apsusc.2017.06.138 ↗
22. Cei S, Legitimo A, Barachini S et al (2011) Effect of laser micromachining of titanium on viability and responsiveness of osteoblast-like cells. Implant Dent 20:285–291. https://doi.org/10.1097/ID.0b013e31821bfa9f10.1097/ID.0b013e31821bfa9f ↗
23. Lee TM, Chang E, Yang CY (2004) Attachment and proliferation of neonatal rat calvarial osteoblasts on Ti6Al4V: effect of surface chemistries of the alloy. Biomaterials 25:23–32. https://doi.org/10.1016/s0142-9612(03)00465-410.1016/s0142-9612(03)00465-4 ↗
24. Liu X, Chu P, Ding C (2004) Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R Rep 47:49–121. https://doi.org/10.1016/j.mser.2004.11.00110.1016/j.mser.2004.11.001 ↗
25. Goldman M, Juodzbalys G, Vilkinis V (2014) Titanium surfaces with nanostructures influence on osteoblasts proliferation: a systematic review. J Oral Maxillofac Res 5:e1. https://doi.org/10.5037/jomr.2014.530110.5037/jomr.2014.5301 ↗
26. Jager M, Jennissen HP, Dittrich F, Fischer A, Kohling HL (2017) Antimicrobial and osseointegration properties of nanostructured titanium orthopaedic implants. Materials 10:1302. https://doi.org/10.3390/ma1011130210.3390/ma10111302 ↗
27. Gokhan Demir A, Furlan V, Lecis N, Previtali B (2014) Laser surface structuring of AZ31 Mg alloy for controlled wettability. Biointerphases 9:029009. https://doi.org/10.1116/1.486824010.1116/1.4868240 ↗
28. Chichkov BN, Momma C, Nolte S, Von Alvensleben F, Tünnermann A (1996) Femtosecond, picosecond and nanosecond laser ablation of solids. Appl Phys A 63:109–115. https://doi.org/10.1007/BF0156763710.1007/BF01567637 ↗
29. Menci G, Demir AG, Waugh DG, Lawrence J, Previtali B (2019) Laser surface texturing of β-Ti alloy for orthopaedics: effect of different wavelengths and pulse durations. Appl Surf Sci 489:175–186. https://doi.org/10.1016/j.apsusc.2019.05.11110.1016/j.apsusc.2019.05.111 ↗
30. Chen J, Ulerich JP, Abelev E, Fasasi A, Arnold CB, Soboyejo WO (2009) An investigation of the initial attachment and orientation of osteoblast-like cells on laser grooved Ti–6Al–4V surfaces. Mater Sci Eng C 29:1442–1452. https://doi.org/10.1016/j.msec.2008.11.01410.1016/j.msec.2008.11.014 ↗
31. Martinez-Calderon M, Manso-Silvan M, Rodriguez A, Gomez-Aranzadi M, Garcia-Ruiz JP, Olaizola SM, Martin-Palma RJ (2016) Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration. Sci Rep 6:36296. https://doi.org/10.1038/srep3629610.1038/srep36296 ↗
32. Furlan V, Demir AG, Previtali B (2015) Micro and sub-micron surface structuring of AZ31 by laser re-melting and dimpling. Opt Laser Technol 75:164–172. https://doi.org/10.1016/j.optlastec.2015.06.03010.1016/j.optlastec.2015.06.030 ↗
33. Manne B, Thiruvayapati H, Bontha S, Motagondanahalli Rangarasaiah R, Das M, Balla VK (2018) Surface design of Mg–Zn alloy temporary orthopaedic implants: tailoring wettability and biodegradability using laser surface melting. Surf Coat Technol 347:337–349. https://doi.org/10.1016/j.surfcoat.2018.05.01710.1016/j.surfcoat.2018.05.017 ↗
34. Taltavull C, Torres B, Lopez AJ, Rodrigo P, Otero E, Atrens A, Rams J (2014) Corrosion behaviour of laser surface melted magnesium alloy AZ91D. Mater Des 57:40–50. https://doi.org/10.1016/j.matdes.2013.12.06910.1016/j.matdes.2013.12.069 ↗
35. Carluccio D, Xu C, Venezuela J et al (2020) Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomater 103:346–360. https://doi.org/10.1016/j.actbio.2019.12.01810.1016/j.actbio.2019.12.018 ↗
36. Sotoudehbagha P, Sheibani S, Khakbiz M, Ebrahimi-Barough S, Hermawan H (2018) Novel antibacterial biodegradable Fe–Mn–Ag alloys produced by mechanical alloying. Mater Sci Eng C 88:88–94. https://doi.org/10.1016/j.msec.2018.03.00510.1016/j.msec.2018.03.005 ↗
37. Heiden M, Nauman E, Stanciu L (2017) Bioresorbable Fe–Mn and Fe–Mn–HA materials for orthopedic implantation: enhancing degradation through porosity control. Adv Healthc Mater 6:1700120. https://doi.org/10.1002/adhm.20170012010.1002/adhm.201700120 ↗
38. Gao L, Liu Z, Ge Y, Feng C, Chu M, Tang J (2019) Synthesis and characterization of manganese ferrite MnxFe3-xO4 from ferruginous manganese ores by multi-step roasting and magnetic separation. Powder Technol 356:373–382. https://doi.org/10.1016/j.powtec.2019.08.03210.1016/j.powtec.2019.08.032 ↗
39. Wen Z, Lu J, Zhang Y et al (2020) Simultaneous oxidation and immobilization of arsenite from water by nanosized magnetic mesoporous iron manganese bimetal oxides (Nanosized-MMIM): Synergistic effect and interface catalysis. Chem Eng J 391:123578. https://doi.org/10.1016/j.cej.2019.12357810.1016/j.cej.2019.123578 ↗
40. Chen Y, Zeng Z, Li Y et al (2020) Glucose enhanced the oxidation performance of iron-manganese binary oxides: Structure and mechanism of removing tetracycline. J Colloid Interface Sci 573:287–298. https://doi.org/10.1016/j.jcis.2020.04.00610.1016/j.jcis.2020.04.006 ↗
41. Vorobyev AY, Makin VS, Guo CJ (2007) Periodic ordering of random surface nanostructures induced by femtosecond laser pulses on metals. J Appl Phys 101:034903–034904. https://doi.org/10.1063/1.243228810.1063/1.2432288 ↗
42. Zhao QZ, Malzer S, Wang LJ (2007) Formation of subwavelength periodic structures on tungsten induced by ultrashort laser pulses. Opt Lett 32:1932–1934. https://doi.org/10.1364/OL.32.00193210.1364/OL.32.001932 ↗
43. Cunha A, Serro AP, Oliveira V, Almeida A, Vilar R, Durrieu M-C (2013) Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces. Appl Surf Sci 265:688–696. https://doi.org/10.1016/j.apsusc.2012.11.08510.1016/j.apsusc.2012.11.085 ↗
44. Kietzig A-M, Hatzikiriakos SG, Englezos P (2009) Patterned Superhydrophobic Metallic Surfaces. Langmuir 25:4821–4827. https://doi.org/10.1021/la803758210.1021/la8037582 ↗
45. Yong J, Chen F, Yang Q, Huo J, Hou X (2017) Superoleophobic surfaces. Chem Soc Rev 46:4168–4217. https://doi.org/10.1039/c6cs00751a10.1039/c6cs00751a ↗
46. Huang SM, Nauman EA, Stanciu LA (2019) Investigation of porosity on mechanical properties, degradation and in-vitro cytotoxicity limit of Fe30Mn using space holder technique. Mater Sci Eng C Mater Biol Appl 99:1048–1057. https://doi.org/10.1016/j.msec.2019.02.05510.1016/j.msec.2019.02.055 ↗
47. Sing NB, Mostavan A, Hamzah E, Mantovani D, Hermawan H (2015) Degradation behavior of biodegradable Fe35Mn alloy stents. J Biomed Mater Res B Appl Biomater 103:572–577. https://doi.org/10.1002/jbm.b.3324210.1002/jbm.b.33242 ↗
48. Heiden M, Walker E, Nauman E, Stanciu L (2015) Evolution of novel bioresorbable iron-manganese implant surfaces and their degradation behaviors in vitro. J Biomed Mater Res A 103:185–193. https://doi.org/10.1002/jbm.a.3515510.1002/jbm.a.35155 ↗
49. Sharma N, Jandaik S, Kumar S, Chitkara M, Sandhu IS (2015) Synthesis, characterisation and antimicrobial activity of manganese- and iron-doped zinc oxide nanoparticles. J Exp Nanosci 11:54–71. https://doi.org/10.1080/17458080.2015.102530210.1080/17458080.2015.1025302 ↗
50. Cheng Y, Yang Q, Lu Y, Yong J, Fang Y, Hou X, Chen F (2020) A femtosecond Bessel laser for preparing a nontoxic slippery liquid-infused porous surface (SLIPS) for improving the hemocompatibility of NiTi alloys. Biomater Sci 8:6505–6514. https://doi.org/10.1039/d0bm01369b10.1039/d0bm01369b ↗
51. Pogodin S, Hasan J, Baulin VA et al (2013) Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces. Biophys J 104:835–840. https://doi.org/10.1016/j.bpj.2012.12.04610.1016/j.bpj.2012.12.046 ↗