Work-hardening behavior, strain rate sensitivity, and failure behavior of in situ CuZr-based metallic glass matrix composite
Source abstract
Abstract
An in situ CuZr-based metallic glass matrix composite containing B2-CuZr phase was prepared by arc melting and injection casting. Mechanical behaviors of the composite under uniaxial compression were investigated over a wide strain rate range (2.0 × 10−4–3.6 × 103 s−1). The composite exhibited obvious work-hardening behavior, considerable plasticity, as well as positive strain rate sensitivity under quasi-static compression, which is attributed to the deformation-induced martensitic transformation and formation of multiple shear bands. In contrast, the composite failed by catastrophic fracture with nearly no macro plasticity and exhibited negative strain sensitivity under dynamic compression, which is owing to the strain rate softening of the amorphous matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Inoue A, Gook JS (1995) Fe-based ferromagnetic glassy alloys with wide supercooled liquid region. JIM 36:180–1183
2. Inoue A (2000) Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater 48:279–30610.1016/S1359-6454(99)00300-6 ↗
3. Louzguine DV, Kato H, Inoue A (2004) High-strength Cu-based crystal-glassy composite with enhanced ductility. Appl Phys Lett 84:1088–108910.1063/1.1647278 ↗
4. Kato H, Inoue A (1997) Synthesis and mechanical properties of bulk amorphous Zr-Al-Ni-Cu alloys containing ZrC particles. JIM 38:793–80010.2320/matertrans1989.38.793 ↗
5. Conner RD, Choi-Yim H, Johnson WL (1999) Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites. J Mater Res 14:3292–329710.1557/JMR.1999.0445 ↗
6. Kim CP, Busch R, Masuhr A, Choi-Yim H, Johnson WL (2001) Processing of carbon-fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites. Appl Phys Lett 79:1456–145810.1063/1.1390317 ↗
7. Choi-Yim H, Schroers J, Johnson WL (2002) Microstructures and mechanical properties of tungsten wire/particle reinforced Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix composites. Appl Phys Lett 80:1906–190810.1063/1.1459766 ↗
8. Sarac B, Schroers J (2013) Designing tensile ductility in metallic glasses. Nat Commun 4:215810.1038/ncomms3158 ↗
9. Siegrist ME, Löffler J (2007) Bulk metallic glass–graphite composites. Scr Mater 56:1079–108210.1016/j.scriptamat.2007.02.022 ↗
10. Fu HM, Liu N, Wang AM, Li H, Zhu ZW, Zhang HW, Zhang HF, Hu ZQ (2014) High-temperature deformation behaviors of W/Zr based amorphous interpenetrating composite. Mater Des 58:182–18610.1016/j.matdes.2013.12.063 ↗
11. Hirano T, Kato H, Matsuo A, Kawamura Y, Inoue A (2000) Synthesis and mechanical properties of Zr55Al10Ni5Cu30 bulk glass composites containing ZrC particles formed by the in situ reaction. JIM 41:1454–145910.2320/matertrans1989.41.1454 ↗
12. Hays CC, Kim CP, Johnson WL (2000) Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys Rev Lett 84:2901–290410.1103/PhysRevLett.84.2901 ↗
13. Fan C, Ott RT, Hufnagel TC (2002) Metallic glass matrix composite with precipitated ductile reinforcement. Appl Phys Lett 81:1020–102210.1063/1.1498864 ↗
14. Fu HM, Zhang HF, Wang H, Zhang QS, Hu ZQ (2005) Synthesis and mechanical properties of Cu-based bulk metallic glass composites containing in situ TiC particles. Scr Mater 52:669–67310.1016/j.scriptamat.2004.10.031 ↗
15. Chen G, Bei H, Cao Y, Gali A, Liu CT, George EP (2009) Enhanced plasticity in a Zr-based bulk metallic glass composite with in situ formed intermetallic phases. Appl Phys Lett 95:08190810.1063/1.3211912 ↗
16. Qiu F, Shen P, Liu T, Jiang QH (2012) Enhanced ductility in a Zr65Cu15Al10Ni10 bulk metallic glass by nanocrystallization during compression. Mater Des 36:168–17110.1016/j.matdes.2011.10.034 ↗
17. Wu JL, Pan Y, Li XZ, Wang XF (2015) Microstructure evolution and mechanical properties of Nb-alloyed Cu-based bulk metallic glasses and composites. Mater Des 75:32–3910.1016/j.matdes.2015.03.013 ↗
18. Das J, Löser W, Kühn U, Eckert J, Roy SK, Schultz L (2003) High-strength Zr-Nb-(Cu, Ni, Al) composites with enhanced plasticity. Appl Phys Lett 82:4690–469210.1063/1.1587254 ↗
19. Löser W, Das J, Güth A, Klauß H-J, Mickel C, Kühn U, Eckert J, Roy SK, Schultz L (2004) Effect of casting conditions on dendrite-amorphous/nanocrystalline Zr-Nb-Cu-Ni-Al in situ composites. Intermetallics 12:1153–115810.1016/j.intermet.2004.04.017 ↗
20. Das J, Pauly S, Duhamel C, Wei BC, Eckert J (2007) Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5. J Mater Res 22:326–33310.1557/jmr.2007.0033 ↗
21. Ma WF, Kou HC, Li JS, Chang H, Zhou L (2009) Effect of strain rate on compressive behavior of Ti-based bulk metallic glass at room temperature. J Alloys Compd 472:214–21810.1016/j.jallcom.2008.04.043 ↗
22. Qiao JW, Ye HY, Wang YS, Pauly S, Yang HJ, Wang ZH (2013) Distinguished work-hardening capacity of a Ti-based metallic glass matrix composite upon dynamic loading. Sci Eng A 585:277–28010.1016/j.msea.2013.07.027 ↗
23. Qiao JW, Chu MY, Cheng L, Ye HY, Yang HJ, Mac SG, Wang ZH (2014) Plastic flows of in situ metallic glass matrix composites upon dynamic loading. Mater Lett 119:92–9510.1016/j.matlet.2013.12.110 ↗
24. Qiao JW, Sun AC, Huang EW, Zhang Y, Liaw PK, Chuang CP (2011) Tensile deformation micromechanisms for bulk metallic glass matrix composites: from work-hardening to softening. Acta Mater 59:4126–413710.1016/j.actamat.2011.03.036 ↗
25. Pan Y, Zeng YQ, Jing LJ, Zhang L, Pi JH (2014) Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses. Mater Des 55:773–77710.1016/j.matdes.2013.10.057 ↗
26. Sun YF, Wei BC, Wang YR, Li WH, Cheung TL, Shek CH (2005) Plasticity-improved Zr-Cu-Al bulk metallic glass matrix composites containing martensite phase. Appl Phys Lett 87:05190510.1063/1.2006218 ↗
27. Das J, Kim KB, Xu W, Wei BC, Zhang ZF, Wang WH, Yi S, Eckert J (2006) Ductile metallic glasses in supercooled martensitic alloys. JIM 47:2606–260910.2320/matertrans.47.2606 ↗
28. Jiang F, Zhang ZB, He L, Sun J, Zhang H, Zhang ZF (2006) The effect of primary crystallizing phases on mechanical properties of Cu46Zr47Al7 bulk metallic glass composites. Mater Res 21:2638–264510.1557/jmr.2006.0315 ↗
29. Jiang F, Zhang DH, Zhang LC, Zhang ZB, He L, Sun J, Zhang ZF (2007) Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases. Mater Sci Eng A 467:139–14510.1016/j.msea.2007.02.093 ↗
30. Pauly S, Das J, Duhamel C, Eckert J (2007) Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite. Adv Eng Mater 9:487–49110.1002/adem.200700044 ↗
31. Pauly S, Das J, Duhamel C, Eckert J (2008) Effect of titanium on microstructure and mechanical properties of Cu50Zr50-xTix (2.5 ≤ x ≤ 7.5) glass matrix composites. Metall Mater Trans A 39:1868–187310.1007/s11661-007-9291-6 ↗
32. Mu J, Zhu ZW, Su R, Wang YD, Zhang HF, Ren Y (2013) In situ high-energy X-ray diffraction studies of deformation-induced phase transformation in Ti-based amorphous alloy composites containing ductile dendrites. Acta Mater 61:5008–501710.1016/j.actamat.2013.04.045 ↗
33. Gargarella P, Pauly S, Song KK, Hu J, Barekar NS, Khoshkhoo MS, Teresiak A, Wendrock H, Kühn U, Ruffing C, Kerscher E, Eckert J (2013) Ti-Cu-Ni shape memory bulk metallic glass composites. Acta Mater 61:151–16210.1016/j.actamat.2012.09.042 ↗
34. Wu Y, Xiao YH, Chen GL, Liu CT, Lu ZP (2010) Bulk metallic glass composites with transformation-mediated work-hardening and ductility. Adv Mater 22:2770–277310.1002/adma.201000482 ↗
35. Xue YF, Wang L, Chen XW, Wang FC, Cheng HW, Zhang HF, Wang AM (2012) Strain rate dependent plastic mutation in a bulk metallic glass under compression. Mater Des 36:284–28810.1016/j.matdes.2011.11.025 ↗
36. Dalla FH, Torre AD, Siegrist ME, Löffler JF (2006) Negative strain rate sensitivity in bulk metallic glass and its similarities with the dynamic strain aging effect during deformation. Appl Phys Lett 89:09191810.1063/1.2234309 ↗
37. Bruck HA, Rosakis AJ, Johnson WL (1996) The dynamic compressive behavior of beryllium bearing bulk metallic glasses. J Mater Res 11:503–51110.1557/JMR.1996.0060 ↗
38. Subhash G, Dowding RJ, Kecskes LJ (2002) Characterization of uniaxial compressive response of bulk amorphous Zr-Ti-Cu-Ni-Be alloy. Mater Sci Eng A 334:33–4010.1016/S0921-5093(01)01768-3 ↗
39. González S, Xie GQ, Louzguine-Luzgin DV, Perepezko JH, Inoue A (2011) Deformation and strain rate sensitivity of a Zr-Cu-Fe-Al metallic glass. Mater Sci Eng A 528:3506–351210.1016/j.msea.2011.01.049 ↗
40. Liu LF, Dai LH, Bai YL, Wei BC, Yu GS (2005) Strain rate-dependent compressive deformation behavior of Nd-based bulk metallic glass. Intermetallics 13:827–83210.1016/j.intermet.2005.01.012 ↗
41. Xue YF, Wang L, Cheng XW, Wang FC, Cheng HW, Zhang HF, Wang AM (2012) Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature. J Mater Res 27:701–70810.1557/jmr.2011.430 ↗
42. Ketov SV, Chen N, Caron A, Inoue A, Louzguine-Luzgin DV (2012) Structural features and high quasi-static strain rate sensitivity of Au49Cu26.9Ag5.5Pd2.3Si16.3 bulk metallic glass. Appl Phys Lett 101:24190510.1063/1.4770072 ↗
43. Wang BP, Wang L, Xue YF, Wang SY, Wang YQ, Wang HF, Wang HM (2014) Strain rate-dependent compressive deformation and failure behavior of porous SiC/Ti-based metallic glass composite. Mater Sci Eng A 609:53–5910.1016/j.msea.2014.04.097 ↗
44. Pauly S, Das J, Bednarcik N, Mattern N, Kim KB, Kim DH, Eckert J (2009) Deformation-induced martensitic transformation in Cu–Zr–(Al, Ti) bulk metallic glass composites. Scr Mater 60:431–43410.1016/j.scriptamat.2008.11.015 ↗
45. Jiao T, Kecskes LJ, Hufnagel TC, Ramesh KT (2004) Deformation and failure of Zr57Nb5Al10Cu15.4Ni12.6/W particle composites under quasi-static and dynamic compression. Mater Trans A 35:3439–344410.1007/s11661-004-0180-y ↗
46. Qiao JW, Feng P, Zhang Y, Zhang QM, Liaw PK, Chen GL (2010) Quasi-static and dynamic deformation behaviors of in situ Zr-based bulk-metallic-glass-matrix composites. J Mater Res 25:2264–227010.1557/jmr.2010.0289 ↗
47. Jiang WH, Fan GJ, Liu FX, Wang GY, Choo H, Liaw PK (2006) Rate dependence of shear banding and serrated flows in a bulk metallic glass. J Mater Res 21:2164–216710.1557/jmr.2006.0266 ↗
48. Jiang WH, Liao HH, Liu FX, Choo H, Liaw PK (2008) Rate-dependent temperature increases in shear bands of a bulk-metallic glass. Metall Mater Trans A 39:1822–183010.1007/s11661-007-9321-4 ↗
49. Maaß R, Löffler J (2015) Shear-band dynamics in metallic glasses. Adv Funct Mater 25:2353–236810.1002/adfm.201404223 ↗