Excellent room temperature ductility of as-cast TRIP high-entropy alloy via Mo and C alloying
Source abstract
Abstract
The effect of C and Mo alloying elements on the microstructure and mechanical properties of transformation-induced plasticity (TRIP) high-entropy alloys (HEAs, Fe50Mn30Co10Cr10) was systematically investigated. The results showed that the as-cast TRIP-HEA doped with 2 at.% C presents an excellent combination of high tensile strength (~ 600 MPa) and high ductility (~ 67.4%) owing to solid-solution strengthening. Surprisingly, the addition of 1 at.% Mo promotes the improvement in tensile strength (~ 658 MPa) and significant increase in elongation (~ 89.8%), which is much larger than that of the most reported as-cast HEAs. This is attributed to the formation of finer equiaxed dendrite grain and the twinning-induced plasticity effect with more deformation twins in TRIP-HEAs added by C and Mo elements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Yeh JW, Chen SK, Lin SJ et al (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Energy Mater 6(5):299–30310.1002/adem.200300567 ↗
2. Miracle DB, Senkov ON (2016) A critical review of high entropy alloys and related concepts. Acta Mater xxx:1–64
3. Chen J, Zhou XY, Wang WL (2018) A review on fundamental of high entropy alloys with promising high–temperature properties. Alloy Compd 760:15–3010.1016/j.jallcom.2018.05.067 ↗
4. Chen J, Niu PY, Liu YZ (2016) Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy. Mater Des 94:39–4410.1016/j.matdes.2016.01.033 ↗
5. Lv YK, Hu RY, Yao ZH (2017) Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys. Mater Des 132:392–39910.1016/j.matdes.2017.07.008 ↗
6. Zhang Y, Zuo TT, Tang Z et al (2014) Microstructures and properties of high-entropy alloys. Prog Mater Sci 61:1–9310.1016/j.pmatsci.2013.10.001 ↗
7. Miracle DB, Majumdar B, Wertz K (2016) New strategies and tests to accelerate discovery and development of multi-principal element structural alloys. Scr Mater 127(1):195–200
8. Guo S, Ng C, Lu J, Liu CT (2011) Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys. J Appl Phys 109(10):1–510.1063/1.3587228 ↗
9. Santodonato LJ, Zhang Y, Feygenson M (2015) Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy. Nat Commun 6:59–6410.1038/ncomms6964 ↗
10. Yeh JW et al (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6:299–30310.1002/adem.200300567 ↗
11. Li Z, Pradeep KG, Deng Y (2016) Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off. Nature 5:227–53410.1038/nature17981 ↗
12. Li Z, Tasan CC, Springer H (2017) Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys. Sci Rep 7:4070410.1038/srep40704 ↗
13. Seol JB, Bae JW, Li Z (2018) Boron doped ultrastrong and ductile high-entropy alloys. Acta Mater 151:366–37610.1016/j.actamat.2018.04.004 ↗
14. Deng Y, Tasan CC, Pradeep KG (2015) Design of a twinning-induced plasticity high entropy alloy. Acta Mater 94:124–13310.1016/j.actamat.2015.04.014 ↗
15. Wang M, Li Z, Raabe D (2018) In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy. Acta Mater 147:236–24610.1016/j.actamat.2018.01.036 ↗
16. Li Z, Tasan CC, Pradeep KG, Raabe D (2017) A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior. Acta Mater 131:323–33510.1016/j.actamat.2017.03.069 ↗
17. Wu Z, Parish CM, Bei H (2015) Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys. J Alloy Compd 647:815–82210.1016/j.jallcom.2015.05.224 ↗
18. Wei D, Li X, Jiang J et al (2019) Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys. Scr Mater 165:39–4310.1016/j.scriptamat.2019.02.018 ↗
19. Wei D, Li X, Heng W (2019) Novel Co-rich high entropy alloys with superior tensile properties. Mater Res Lett 7:82–8810.1080/21663831.2018.1553803 ↗
20. Liu SF, Wu Y, Wan HT (2018) Stacking fault energy of face-centered-cubic high entropy alloys. Intermetallics 93:269–27310.1016/j.intermet.2017.10.004 ↗
21. Huang S, Li W, Lu S (2015) Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy. Scr Mater 108:44–4710.1016/j.scriptamat.2015.05.041 ↗
22. De Cooman BC, Estrin Y, Kim SK (2018) Twinning-induced plasticity (TWIP) steels. Acta Mater 142:283–36210.1016/j.actamat.2017.06.046 ↗
23. Wang Z, Baker I, Cai Z, Chen S (2016) The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40. 4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys. Acta Mater 120:228–23910.1016/j.actamat.2016.08.072 ↗
24. Chen J, Yao ZH, Wang XB et al (2018) Effect of C content on microstructure and tensile properties of as-cast CoCrFeMnNi high entropy alloy. Mater Chem Phys 210:136–14510.1016/j.matchemphys.2017.08.011 ↗
25. Fan JT, Zhang LJ, Yu PF (2018) Improved the microstructure and mechanical properties of AlFeCoNi high entropy alloy by carbon addition. Mater Sci Eng A 72:830–839
26. Wei DX, Li XQ, Schönecker S et al (2019) Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys, Acta Mater. SSRN: https://ssrn.com/abstract=3416324
27. Chen LB, Wei R, Tang K (2018) Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility. Mater Sci Eng A716:150–15610.1016/j.msea.2018.01.045 ↗
28. Wei R, Sun H, Han ZH (2018) Strengthening of Fe40Mn40Co10Cr10 high entropy alloy via Mo/C alloying. Mater Lett 219:85–8810.1016/j.matlet.2018.02.065 ↗
29. He JY, Wang H, Huang HL et al (2016) A precipitation-hardened high-entropy alloy with outstanding tensile properties. Acta Mater 102:187–19610.1016/j.actamat.2015.08.076 ↗