Enhanced microwave absorption of plasma-sprayed Ti3SiC2/glass composite coatings
Source abstract
Abstract
The Ti3SiC2/glass composite coatings were prepared by atmospheric plasma spraying. There are no evident microcracks between Ti3SiC2 and glass matrix due to low residual stress resulting from the matching CTE of them. The XRD patterns of the as-sprayed Ti3SiC2/glass composite coatings are composed of glass matrix, Ti3SiC2, TiC, and a small amount of Ti5Si3. The short dwell time and quite low oxygen partial pressure in plasma jet flow restrain TiC and Ti5Si3 from further oxidation. Both the real and imaginary part of the complex permittivity increase with rising Ti3SiC2 content. The coating with 25 wt% Ti3SiC2 possesses excellent microwave absorption properties. The minimum reflection loss is −47.7 dB (> 99.99 % absorption) at 10.6 GHz with a thickness of 1.4 mm and the bandwidth (<−5 dB) can be obtained in the frequency range of 8.2–12.4 GHz. The impedance matching and dielectric loss of the coating result in the microwave absorption properties improved. The enhanced microwave absorption performance suggests that the Ti3SiC2/glass coating could be a good candidate for highly efficient microwave absorption material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Kong L, Li Z, Liu L, Huang R, Abshinova M, Yang Z, Tang C, Tan P, Deng C, Matitsine S (2013) Recent progress in some composite materials and structures for specific electromagnetic applications. Int Mater Rev 58:203–25910.1179/1743280412Y.0000000011 ↗
2. Qin F, Brosseau C (2012) A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles. J Appl Phys 111:06130110.1063/1.3688435 ↗
3. Najim M, Modi G, Mishra YK, Adelung R, Singh D, Agarwala V (2015) Ultra-wide bandwidth with enhanced microwave absorption of electroless Ni–P coated tetrapod-shaped ZnO nano-and microstructures. Phys Chem Chem Phys 17:22923–2293310.1039/C5CP03488D ↗
4. Zhang Y, Huang Y, Zhang T, Chang H, Xiao P, Chen H, Huang Z, Chen Y (2015) Broadband and tunable high-performance microwave absorption of an ultralight and highly compressible graphene foam. Adv Mater 27:2049–205310.1002/adma.201405788 ↗
5. Wei J, Liu X, Cui Z-K, Gu J, Li X, Qian J, Lin S, Zhuang Q (2016) Preparation of MWNT-g-poly (2,5-benzoxazole) (ABPBO) with excellent electromagnetic absorption properties in the Ku band via atom transfer radical polymerization (ATRP). J Mater Sci 51:7370–7382. doi: 10.1007/s10853-016-0027-010.1007/s10853-016-0027-0 ↗
6. Liu H, Tian H (2012) Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process. J Eur Ceram Soc 32:2505–251210.1016/j.jeurceramsoc.2012.02.009 ↗
7. Duan W, Yin X, Li Q, Schlier L, Greil P, Travitzky N (2016) A review of absorption properties in silicon-based polymer derived ceramics. J Eur Ceram Soc. doi: 10.1016/j.jeurceramsoc.2016.02.00210.1016/j.jeurceramsoc.2016.02.002 ↗
8. Melvin G-J-H, Ni Q-Q, Suzuki Y, Natsuki T (2014) Microwave-absorbing properties of silver nanoparticle/carbon nanotube hybrid nanocomposites. J Mater Sci 49:5199–5207. doi: 10.1007/s10853-014-8229-910.1007/s10853-014-8229-9 ↗
9. Durmus Z, Durmus A, Kavas H (2014) Synthesis and characterization of structural and magnetic properties of graphene/hard ferrite nanocomposites as microwave-absorbing material. J Mater Sci 50(3):1201–1213. doi: 10.1007/s10853-014-8676-310.1007/s10853-014-8676-3 ↗
10. Yu M, Yang P, Fu J, Liu S (2015) Flower-like carbonyl iron powder modified by nanoflakes: preparation and microwave absorption properties. Appl Phys Lett 106:16190410.1063/1.4919064 ↗
11. Vinayasree S, Soloman M, Sunny V, Mohanan P, Kurian P, Anantharaman M (2013) A microwave absorber based on strontium ferrite–carbon black–nitrile rubber for S and X-band applications. Compos Sci Technol 82:69–7510.1016/j.compscitech.2013.04.010 ↗
12. Lu M-M, Cao W-Q, Shi H-L, Fang X-Y, Yang J, Hou Z-L, Jin H-B, Wang W-Z, Yuan J, Cao M-S (2014) Multi-wall carbon nanotubes decorated with ZnO nanocrystals: mild solution-process synthesis and highly efficient microwave absorption properties at elevated temperature. J Mater Chem A 2:10540–1054710.1039/c4ta01715c ↗
13. Ren Y, Li S, Dai B, Huang X (2014) Microwave absorption properties of cobalt ferrite-modified carbonized bacterial cellulose. Appl Surf Sci 311:1–410.1016/j.apsusc.2014.04.150 ↗
14. Osouli-Bostanabad K, Hosseinzade E, Kianvash A, Entezami A (2015) Modified nano-magnetite coated carbon fibers magnetic and microwave properties. Appl Surf Sci 356:1086–109510.1016/j.apsusc.2015.08.115 ↗
15. Huang Yunxia, Wang Yan, Li Zhimin, Yang Zi, Shen Chunhao, He Chuangchuang (2014) Effect of Pore Morphology on the Dielectric Properties of Porous Carbons for Microwave Absorption Applications. J Phys Chem C 118(45):26027–2603210.1021/jp506999k ↗
16. Wang Guizhen, Gao Zhe, Tang Shiwei, Chen Chaoqiu, Duan Feifei, Zhao Shichao, Lin Shiwei, Feng Yuhong, Zhou Lei, Qin Yong (2012) Microwave absorption properties of carbon nanocoils coated with highly controlled magnetic materials by atomic layer deposition. ACS Nano 6(12):11009–1101710.1021/nn304630h ↗
17. Yang H, Ye T, Lin Y, Liu M (2015) Preparation and microwave absorption property of graphene/BaFe12O19/CoFe2O4 nanocomposite. Appl Surf Sci 357:1289–129310.1016/j.apsusc.2015.09.147 ↗
18. Wang A, Wang W, Long C, Li W, Guan J, Gu H, Xu G (2014) Facile preparation, formation mechanism and microwave absorption properties of porous carbonyl iron flakes. J Mater Chem C 2:3769–377610.1039/C4TC00108G ↗
19. Huang X, Zhang J, Xiao S, Chen G (2014) The cobalt zinc spinel ferrite nanofiber: lightweight and efficient microwave absorber. J Am Ceram Soc 97:1363–136610.1111/jace.12909 ↗
20. Song W-L, Cao M-S, Lu M-M, Liu J, Yuan J, Fan L-Z (2013) Improved dielectric properties and highly efficient and broadened bandwidth electromagnetic attenuation of thickness-decreased carbon nanosheet/wax composites. J Mater Chem C 1:1846–185410.1039/c2tc00494a ↗
21. Mu Y, Zhou W, Hu Y, Qing Y, Luo F, Zhu D (2015) Improvement of mechanical and dielectric properties of PIP-SiCf/SiC composites by using Ti3SiC2 as inert filler. Ceram Int 41:4199–420610.1016/j.ceramint.2014.12.108 ↗
22. Li Z, Wei X, Luo F, Zhou W, Hao Y (2014) Microwave dielectric properties of Ti3SiC2 powders synthesized by solid state reaction. Ceram Int 40:2545–254910.1016/j.ceramint.2013.07.144 ↗
23. Li Z, Luo F, He C, Yang Z, Li P, Hao Y (2015) Improving the microwave dielectric properties of Ti3SiC2 powders by Al doping. J Alloys Compd 618:50810.1016/j.jallcom.2014.08.199 ↗
24. Low I, Wren E, Prince K, Atanacio A (2007) Characterization of phase relations and properties in air-oxidised Ti3SiC2. Mater Sci Eng, A 466:140–14710.1016/j.msea.2007.02.034 ↗
25. Barsoum MW, El-Raghy T (1996) Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J Am Ceram Soc 79:1953–195610.1111/j.1151-2916.1996.tb08018.x ↗
26. Sun Z, Zhou Y, Li M (2001) Oxidation behaviour of Ti3SiC2-based ceramic at 900–1300 ∘C in air. Corros Sci 43:1095–110910.1016/S0010-938X(00)00142-6 ↗
27. Li S, Song G-M, Zhou Y (2012) A dense and fine-grained SiC/Ti3Si(Al)C2 composite and its high-temperature oxidation behavior. J Eur Ceram Soc 32:3435–344410.1016/j.jeurceramsoc.2012.04.029 ↗
28. Liu Y, Luo F, Su J, Zhou W, Zhu D (2015) Dielectric and microwave absorption properties of Ti3SiC2/cordierite composite ceramics oxidized at high temperature. J Alloys Compd 632:623–62810.1016/j.jallcom.2015.01.272 ↗
29. Su J, Zhou W, Liu Y, Qing Y, Luo F, Zhu D (2015) Effect of Ti3SiC2 addition on microwave absorption property of Ti3SiC2/cordierite coatings. Surf Coat Technol 270:39–4610.1016/j.surfcoat.2015.03.021 ↗
30. Barsoum M, El-Raghy T, Rawn C, Porter W, Wang H, Payzant E, Hubbard C (1999) Thermal properties of Ti3SiC2. J Phys Chem Solids 60:429–43910.1016/S0022-3697(98)00313-8 ↗
31. Smeacetto F, Salvo M, Bytner FDH, Leone P, Ferraris M (2010) New glass and glass–ceramic sealants for planar solid oxide fuel cells. J Eur Ceram Soc 30:933–94010.1016/j.jeurceramsoc.2009.09.033 ↗
32. Holand W, Beall GH (2012) Glass ceramic technology. Wiley, Hoboken10.1002/9781118265987 ↗
33. Davis JR (2004) Handbook of thermal spray technology. ASM international, Materials park
34. Gan JA, Berndt CC (2015) Nanocomposite coatings: thermal spray processing, microstructure and performance. Int Mater Rev 60:195–24410.1179/1743280414Y.0000000048 ↗
35. Wen Q, Zhou W, Su J, Qing Y, Luo F, Zhu D (2015) Dielectric and microwave absorption properties of plasma sprayed short carbon fibers/glass composite coatings. J Mater Sci: Mater Electron 27:1783–1790
36. Heimann RB (2008) Plasma-spray coating: principles and applications. Wiley, Hoboken
37. Zhang J, He YM, Sun Y, Liu CF (2010) Microstructure evolution of Si3N4/Si3N4 joint brazed with Ag–Cu–Ti + SiCp composite filler. Ceram Int 36:1397–140410.1016/j.ceramint.2010.02.010 ↗
38. Choi Y, Rhee S-W (1994) Equilibrium in the reaction of Ti and C to form substoichiometric TiCx. J Mater Sci Lett 13:323–32510.1007/BF00420786 ↗
39. Khoptiar Y, Gotman I (2003) Synthesis of dense Ti3SiC2-based ceramics by thermal explosion under pressure. J Eur Ceram Soc 23:47–5310.1016/S0955-2219(02)00076-6 ↗
40. Sun Z, Zhou Y, Li M (2001) High temperature oxidation behavior of Ti3SiC2-based material in air. Acta Mater 49:4347–435310.1016/S1359-6454(01)00247-6 ↗
41. Kao KC (2004) Dielectric phenomena in solids. Academic press, Cambridge
42. Qing Y, Wen Q, Luo F, Zhou W, Zhu D (2016) Graphene nanosheets/BaTiO3 ceramics as highly efficient electromagnetic interference shielding materials in the X-band. J Mater Chem C 4:371–37510.1039/C5TC03035H ↗
43. Regalado CM (2004) A physical interpretation of logarithmic TDR calibration equations of volcanic soils and their solid fraction permittivity based on Lichtenecker’s mixing formulae. Geoderma 123:41–5010.1016/j.geoderma.2004.01.026 ↗
44. Wang B, Guo Z, Han Y, Zhang T (2013) Electromagnetic Wave Absorbing Properties of Multi-walled Carbon Nanotube/Cement Composites. Constr Build Mater 46:98–10310.1016/j.conbuildmat.2013.04.006 ↗
45. Wang H, Zhu D, Zhou W, Luo F (2015) Temperature dependence of the electromagnetic and microwave absorption properties of polyimide/Ti3SiC2 composites in the X band. RSC Adv 5:86656–8666410.1039/C5RA17758H ↗
46. Qing Y, Zhou W, Luo F, Zhu D (2012) Effect of magnetic fillers on the electromagnetic properties of CaCu3Ti4O12–epoxy composites within the 2–18 GHz range. J Mater Chem C 1:536–54110.1039/C2TC00150K ↗
47. Tian L, Yan X, Xu J, Wallenmeyer P, Murowchick J, Liu L, Chen X (2015) Effect of hydrogenation on the microwave absorption properties of BaTiO3 nanoparticles. J Mater Chem A 3:12550–1255610.1039/C5TA02109J ↗
48. Sudeep P, Vinayasree S, Mohanan P, Ajayan P, Narayanan T, Anantharaman M (2015) Fluorinated graphene oxide for enhanced S and X-band microwave absorption. Appl Phys Lett 106:22160310.1063/1.4922209 ↗
49. Ansari A, Akhtar MJ (2016) Investigation on electromagnetic characteristics, microwave absorption, thermal and mechanical properties of ferromagnetic cobalt–polystyrene composites in the X-band (8.4–12.4 GHz). RSC Adv 6:13846–1385710.1039/C5RA26489H ↗