Size-controllable copper nanomaterials for flexible printed electronics
Source abstract
Abstract
Size-controllable copper nanomaterials were easily obtained via an improved polyol process by regulating the dosage of copper source and reducing agent. The monodisperse copper nanoparticles with strong antioxidation properties were employed as fillers to fabricate conductive ink. The copper-based ink could be screen-printed onto flexible substrates, which shows persistent stability and uniform properties without color change for a few days. After heating at 240 °C (40 min) in N2 atmosphere, a low electrical resistivity of 16.2 μΩ cm was obtained for the copper nanomaterial-based conductive pattern.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Tam SK, Fung KY, Ng KM (2016) Copper pastes using bimodal particles for flexible printed electronics. J Mater Sci 51:1914–1922. https://doi.org/10.1007/s10853-015-9498-710.1007/s10853-015-9498-7 ↗
2. Li JJ, Cheng CL, Shi TL, Fan JH, Yu X, Cheng SY, Liao GL, Tang ZR (2016) Surface effect induced Cu–Cu bonding by Cu nanosolder paste. Mater Lett 184:193–19610.1016/j.matlet.2016.08.085 ↗
3. Kim D, Jeong S, Moon J (2006) Synthesis of silver nanoparticles using the polyol process and the influence of precursor injection. Nanotechnology 17:4019–402410.1088/0957-4484/17/16/004 ↗
4. Perelaer J, Smith PJ, Mager D, Soltman D, Volkman SK, Subramanian V, Korvink JG, Schubert US (2010) Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials. J Mater Chem 20:8446–845310.1039/c0jm00264j ↗
5. Guo R, Yu Y, Xie Z, Liu X, Zhou X, Gao Y, Liu Z, Zhou F, Yang Y, Zheng Z (2013) Matrix-assisted catalytic printing for the fabrication of multiscale, flexible, foldable, and stretchable metal conductors. Adv Mater 25:3343–335010.1002/adma.201301184 ↗
6. Jiu J, Zhang H, Nagao S, Sugahara T, Kagami N, Suzuki Y, Akai Y, Suganuma K (2016) Die-attaching silver paste based on a novel solvent for high-power semiconductor devices. J Mater Sci 51:3422–3430. https://doi.org/10.1007/s10853-015-9659-810.1007/s10853-015-9659-8 ↗
7. Komoda N, Nogi M, Suganuma K, Otsuka K (2012) Highly sensitive antenna using inkjet overprinting with particle-free conductive inks. ACS Appl Mater Interfaces 4:5732–573610.1021/am301747p ↗
8. Dong Q, Huang C, Duan G, Zhang F, Yang D (2017) Facile synthesis and electrical performance of silica-coated copper powder for copper electronic pastes on low temperature co-fired ceramic. Mater Lett 186:263–26610.1016/j.matlet.2016.09.116 ↗
9. Deng D, Jin Y, Cheng Y, Qi T, Xiao F (2013) Copper nanoparticles: aqueous phase synthesis and conductive films fabrication at low sintering temperature. ACS Appl Mater Interfaces 5:3839–384610.1021/am400480k ↗
10. Perelaer J, Gans BJ, Schubert US (2006) Ink-jet printing and microwave sintering of conductive silver tracks. Adv Mater 18:2101–210410.1002/adma.200502422 ↗
11. Yan GQ, Wang L, Zhang L (2010) Recent research progress on preparation of silver nanowires by soft solution method, preparation of gold nanotubes and Pt nanotubes from resultant silver nanowires and their applications in conductive adhesive. Rev Adv Mater Sci 24:10–25
12. Ghosh S, Yang R, Kaumeyer M, Zorman C, Rowan S, Feng P, Sankaran R (2014) Fabrication of electrically conductive metal patterns at the surface of polymer films by microplasma-based direct writing. ACS Appl Mater Interfaces 6:3099–310410.1021/am406005a ↗
13. Jang S, Seo Y, Choi J, Kim T, Cho J, Kim S, Kim D (2010) Sintering of inkjet printed copper nanoparticles for flexible electronics. Scripta Mater 62:258–26110.1016/j.scriptamat.2009.11.011 ↗
14. Eivazihollagh A, Bäckström J, Dahlström C, Carlsson F (2017) One-pot synthesis of cellulose-templated copper nanoparticles with antibacterial properties. Mater Lett 187:170–17210.1016/j.matlet.2016.10.026 ↗
15. Zhang HX, Siegert U, Liu R, Cai WB (2009) Facile fabrication of ultrafine copper nanoparticles in organic solvent. Nanoscale Res Lett 4:705–70810.1007/s11671-009-9301-2 ↗
16. Sarkar A, Mukherjee T, Kapoor S (2008) PVP-stabilized copper nanoparticles: a reusable catalyst for “click” reaction between terminal alkynes and azides in nonaqueous solvents. J Phys Chem C 112:3334–334010.1021/jp077603i ↗
17. Park BK, Jeong S, Kim D, Moon J, Lim S, Kim JS (2007) Synthesis and size control of monodisperse copper nanoparticles by polyol method. J Colloid Interface Sci 311:417–42410.1016/j.jcis.2007.03.039 ↗
18. Xu M, Peng W, Cai J, Li X, Liu Z, Huai X (2015) Ultrasound-assisted synthesis and characterization of ultrathin copper nanowhiskers. Mater Lett 161:164–16710.1016/j.matlet.2015.08.092 ↗
19. Yan J, Zou G, Hu A, Zhou YN (2011) Preparation of PVP coated Cu NPs and the application for low-temperature bonding. J Mater Chem 21:15981–1598610.1039/c1jm12108a ↗
20. Magdassi S, Grouchko M, Kamyshny A (2010) Copper nanoparticles for printed electronics: routes towards achieving oxidation stability. Materials 3:4626–463810.3390/ma3094626 ↗
21. Sun JH, Jing Y, Jia YZ, Tillard M, Belin C (2005) Mechanism of preparing ultrafine copper powder by polyol process. Mater Lett 59:3933–393610.1016/j.matlet.2005.07.036 ↗
22. Mott D, Galkowski J, Wang LY, Luo J, Zhong CJ (2007) Synthesis of size-controlled and shaped copper nanoparticles. Langmuir 23:5740–574510.1021/la0635092 ↗
23. Engels V, Benaskar F, Jefferson DA, Johnson BF, Wheatley AE (2010) Nanoparticulate copper-routes towards oxidative stability. Dalton Trans 28:6496–6502