Mechanical, dynamic mechanical and thermal properties of TiO2 nanoparticles treatment bamboo fiber-reinforced polypropylene composites
Source abstract
Abstract
To obtain better interfacial bonding between bamboo fibers (BFs) and matrix polypropylene (PP), PP/BFs composites were prepared by means of modifying BFs with TiO2 nanoparticles. The static mechanical and dynamic mechanical properties, thermal properties, morphology and water resistance of the fabricated composites were characterized. The results showed the static and dynamic mechanical properties, thermal stability and water resistance of the composite were all improved at different extents by the introduction of TiO2 nanoparticles, especially with the addition of 0.4 wt% TiO2 nanoparticles (PP/BF/T3). The performances enhancement of TiO2 nanoparticles modified composites was mainly attributed to the interfacial bonding improvement, demonstrated by the Cole–Cole curves of dynamic mechanical analysis and the morphological analysis of fracture surface, as well as the increased crystallinity revealed with differential scanning calorimetry measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Lian C, Liu R, Luo J, Yang F, Zhang S, Fei B (2020) The morphological characteristics and classification of vascular parenchyma cells in bamboo, Phyllostachys edulis (Carr.). J Houz Holzforschung 74:1–10. https://doi.org/10.1515/hf-2019-024110.1515/hf-2019-0241 ↗
2. Hsu CY, Yang TC, Wu TL, Hung KC, Wu JH (2018) The influence of bamboo fiber content on the non-isothermal crystallization kinetics of bamboo fiber-reinforced polypropylene composites (BPCs). Holzforschung 72:329–336. https://doi.org/10.1515/hf-2017-004610.1515/hf-2017-0046 ↗
3. Jariwala H, Jain P (2019) A review on mechanical behavior of natural fiber reinforced polymer composites and its applications. J Reinf Plast Comp. https://doi.org/10.1177/073168441982852410.1177/0731684419828524 ↗
4. Kumar N, Mireja S, Khandelwal V, Arun B, Manik G (2017) Light-weight high-strength hollow glass microspheres and bamboo fiber based hybrid polypropylene composite: a strength analysis and morphological study. Compos Part B-Eng 109:1–22. https://doi.org/10.1016/j.compositesb.2016.10.05210.1016/j.compositesb.2016.10.052 ↗
5. Liew FK, Hamdan S, Rahman MR, Rusop M, Khan A (2020) Thermo-mechanical properties of jute/bamboo/polyethylene hybrid composites: the combined effects of silane coupling agent and copolymer. Polym Composite. https://doi.org/10.1002/pc.2575510.1002/pc.25755 ↗
6. Xie J, Qi J, Hu T, De Hoop CF, Hse CY, Shupe TF (2016) Effect of fabricated density and bamboo species on physical-mechanical properties of bamboo fiber bundle reinforced composites. J Mater Sci 51:7480–7490. https://doi.org/10.1007/s10853-016-0024-310.1007/s10853-016-0024-3 ↗
7. Safwan A, Jawaid M, Sultan MTH, Hassan A (2018) Preliminary study on tensile and impact properties of Kenaf/bamboo fiber reinforced epoxy composites. J Renew Mater. https://doi.org/10.7569/JRM.2018.63410310.7569/JRM.2018.634103 ↗
8. Depuydt DEC, Billington L, Fuentes C, Sweygers N, Dupont C, Appels L, Ivens J, Van VAW (2019) European bamboo fibres for composites applications, study on the seasonal influence. Ind Crops Prod 133:304–316. https://doi.org/10.1016/j.indcrop.2019.03.02610.1016/j.indcrop.2019.03.026 ↗
9. Wang F, Yang M, Zhou S, Ran S, Zhang J (2018) Effect of fiber volume fraction on the thermal and mechanical behavior of polylactide-based composites incorporating bamboo fibers. J Appl Polym Sci 135:46148. https://doi.org/10.1002/app.4614810.1002/app.46148 ↗
10. Zakikhani P, Zahari R, Sultan MTH, Majid DL (2014) Extraction and preparation of bamboo fibre-reinforced composites. Mater Design 63:820–828. https://doi.org/10.1016/j.matdes.2014.06.05810.1016/j.matdes.2014.06.058 ↗
11. Mahir FI, Keya KN, Sarker B, Nahiun KM, Khan RA (2019) A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites. Mater Eng Res 1:88–99. https://doi.org/10.25082/MER.2019.02.00710.25082/MER.2019.02.007 ↗
12. Biswas S, Shahinur S, Hasan M, Ahsan Q (2015) Physical, mechanical and thermal properties of jute and bamboo fiber reinforced unidirectional epoxy composites. Proc Eng 105:933–939. https://doi.org/10.1016/j.proeng.2015.05.11810.1016/j.proeng.2015.05.118 ↗
13. Li Y, Jiang LY, Xiong CD, Peng WJ (2015) Effect of different surface treatment for bamboo fiber on the crystallization behavior and mechanical property of bamboo fiber/nanohydroxyapatite/poly(lactic-co-glycolic) composite. Ind Eng Chem Res 54:12017–12024. https://doi.org/10.1021/acs.iecr.5b0272410.1021/acs.iecr.5b02724 ↗
14. Tang S, Jiang L, Ma B, Tang C, Su S (2020) Preparation and characterization of bamboo fiber/chitosan/nano-hydroxyapatite composite membrane by ionic crosslinking. Cellulose 4:1–12. https://doi.org/10.1007/s10570-020-03145-210.1007/s10570-020-03145-2 ↗
15. Wang CC, Cai L, Shi SQ, Wang G, Cheng HT, Zhang SB (2019) Thermal and flammable properties of bamboo pulp fiber/high-density polyethylene composites: influence of preparation technology, nano calcium carbonate and fiber content. Renewable Energy 134(4):436–445. https://doi.org/10.1016/j.renene.2018.09.05110.1016/j.renene.2018.09.051 ↗
16. Fei P, Xiong HG, Cai J, Liu C, Zia-ud-Din YuY (2016) Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO2. Constr Build Mater 114:307–316. https://doi.org/10.1016/j.conbuildmat.2016.03.16610.1016/j.conbuildmat.2016.03.166 ↗
17. Chaudhary V, Ahmad F (2020) A review on plant fiber reinforced thermoset polymers for structural and frictional composites. Polym Testing 91:106792. https://doi.org/10.1016/j.polymertesting.2020.10679210.1016/j.polymertesting.2020.106792 ↗
18. Rahman MR, Hamdan S, Hashim DMA, Islam MS, Takagi H (2015) Bamboo fiber polypropylene composites: effect of fiber treatment and nano clay on mechanical and thermal properties. J Vinyl Addit Techn 21:253–258. https://doi.org/10.1002/vnl.2140710.1002/vnl.21407 ↗
19. Pradeep KK, Rakesh K (2011) Reinforcing effect of nanoclay in bamboo-reinforced thermosetting resin composites. Polym Plast Technol 50:127–135. https://doi.org/10.1080/03602559.2010.51235010.1080/03602559.2010.512350 ↗
20. Wang J, Dong J, Zhang J, Zhu B, Cui D (2018) Effects of fiber-surface modification on the properties of bamboo flour/polypropylene composites and their interfacial compatibility. J Polym Eng 38:157–166. https://doi.org/10.1515/polyeng-2016-043210.1515/polyeng-2016-0432 ↗
21. Zuo Y, Chen K, Li P, He X, Li W, Wu Y (2020) Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite. Int J Biol Macromol 157:177–186. https://doi.org/10.1016/j.ijbiomac.2020.04.20510.1016/j.ijbiomac.2020.04.205 ↗
22. Abeer AS, Rozli Z, Che HA (2020) Tensile properties and microstructure of single-cellulosic bamboo fiber strips after alkali treatment. Fibers 8:26. https://doi.org/10.3390/fib805002610.3390/fib8050026 ↗
23. Chen H, Yu Y, Zhong TH, Wu Y, Li YJ, Wu ZH, Fei BH (2017) Effect of alkali treatment on microstructure and mechanical properties of individual bamboo fiber. Cellulose 24:333–347. https://doi.org/10.1007/s10570-016-1116-610.1007/s10570-016-1116-6 ↗
24. Lee SY, Kang IA, Park BS, Doh GH, Park BD (2008) Effects of filler and coupling agent on the properties of bamboo fiber-reinforced polypropylene composites. J Reinf Plast Compos 9:1–17. https://doi.org/10.1177/073168440809407010.1177/0731684408094070 ↗
25. del Pilar L, Cabrera F, de Lima R, Santana MC, Chamorro CD (2020) Influence of coupling agent in mechanical, physical and thermal properties of polypropylene/bamboo fiber composites: under natural outdoor aging. Polymers 12:929. https://doi.org/10.3390/polym1204092910.3390/polym12040929 ↗
26. Li YJ, Yin LP, Huang CJ, Meng YJ, Fu F, Wang SQ, Wu Q (2015) Quasi-static and dynamic nanoindentation to determine the influence of thermal treatment on the mechanical properties of bamboo cell walls. Holzforschung 69:909–914. https://doi.org/10.1515/hf-2014-011210.1515/hf-2014-0112 ↗
27. Akinyemi AB, Omoniyi ET, Onuzulike G (2020) Effect of microwave assisted alkali pretreatment and other pretreatment methods on some properties of bamboo fibre reinforced cement composites. Constr Build Mater 245:118405. https://doi.org/10.1016/j.conbuildmat.2020.11840510.1016/j.conbuildmat.2020.118405 ↗
28. Cheng HT, Gao J, Wang G, Shi SQ, Zhang SB, Cai LP (2015) Enhancement of mechanical properties of composites made of calcium carbonate modified bamboo fibers and polypropylene. Holzforschung 69:215–221. https://doi.org/10.1515/hf-2014-002010.1515/hf-2014-0020 ↗
29. Ying SJ, Wang CB, Lin Q (2013) Effects of heat treatment on the properties of bamboo fiber/polypropylene composites. Fiber Polym 14:1894–1898. https://doi.org/10.1007/s12221-013-1894-510.1007/s12221-013-1894-5 ↗
30. Inácio André LN, Nonato Renato C, Bonse Baltus C (2017) Recycled PP/EPDM/talc reinforced with bamboo fiber: Assessment of fiber and compatibilizer content on properties using factorial design. Polym Test 61:214–222. https://doi.org/10.1016/j.polymertesting.2017.05.02210.1016/j.polymertesting.2017.05.022 ↗
31. Abdul Khalil HPS, Bhat IUH, Jawaid M, Zaidon A, Hadi YS (2012) Bamboo fibre reinforced biocomposites: a review. Mater Des 42:353–368. https://doi.org/10.1016/j.matdes.2012.06.01510.1016/j.matdes.2012.06.015 ↗
32. Sun ZY, Wu MM (2019) Effects of sol-gel modification on the interfacial and mechanical properties of sisal fiber reinforced polypropylene composites. Ind crops prod 137:89–97. https://doi.org/10.1016/j.indcrop.2019.05.02110.1016/j.indcrop.2019.05.021 ↗
33. Deng JC, Wei X, Zhou HY, Wang G, Zhang SB (2020) Inspiration from table tennis racket: preparation of rubber-wood-bamboo laminated composite (RWBLC) and its response characteristics to cyclic perpendicular compressive load. Compos Struct 241:112135. https://doi.org/10.1016/j.compstruct.2020.11213510.1016/j.compstruct.2020.112135 ↗
34. Nigel C, Paula D, Derya K, Jaipal G, Tony M (2018) Isothermal and non-isothermal crystallization kinetics of composites of poly(propylene) and MWCNTs. Adv Ind Eng Polymer Res 1:99–110. https://doi.org/10.1016/j.aiepr.2018.06.00110.1016/j.aiepr.2018.06.001 ↗
35. Sukanya S, Raju VSK (2018) Mechanical, dynamic mechanical and thermal properties of banana fiber/recycled high density polyethylene biocomposites filled with flyash cenospheres. J Polym Environ 1:200. https://doi.org/10.1007/s10924-017-0938-010.1007/s10924-017-0938-0 ↗
36. Zahedi M, Khanjanzadeh H, Pirayesh H, Saadatnia MA (2015) Utilization of natural montmorillonite modified with dimethyl, dehydrogenated tallow quaternary ammonium salt as reinforcement in almond shell flour–polypropylene bio-nanocomposites. Compos Part B-Eng 71:143–151. https://doi.org/10.1016/j.compositesb.2014.11.00910.1016/j.compositesb.2014.11.009 ↗
37. Wang ZD, Yang MM, Cheng YH, Liu JY, Xiao B, Chen SY, Huang JL, Xie Q, Wu GL, Wu HJ (2019) Dielectric properties and thermal conductivity of epoxy composites using quantum-sized silver decorated core/shell structured alumina/polydopamine. Compos A 118:302–311. https://doi.org/10.1016/j.compositesa.2018.12.02210.1016/j.compositesa.2018.12.022 ↗
38. Pan C, Kou KC, Zhang Y, Li ZY, Wu GL (2018) Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride particles. Compos B 153:1–8. https://doi.org/10.1016/j.compositesb.2018.07.01910.1016/j.compositesb.2018.07.019 ↗
39. Pan C, Kou KC, Jia Q, Zhang Y, Wu GL, Ji TZ (2017) Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent. Compos B Eng 111:83–90. https://doi.org/10.1016/j.compositesb.2016.11.05010.1016/j.compositesb.2016.11.050 ↗
40. Pan C, Zhang JQ, Kou KC, Zhang Y, Wu GL (2018) Investigation of the through-plane thermal conductivity of polymer composites with in-plane oriented hexagonal boron nitride. Int J Heat Mass Tran 120:1–8. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.01510.1016/j.ijheatmasstransfer.2017.12.015 ↗
41. Mishra R, Wiener J, Militky J, Petru M, Tomkova B, Novotna J (2020) Bio-composites reinforced with natural fibers: comparative analysis of thermal, static and dynamic-mechanical properties. Fiber Polym 21:619–627. https://doi.org/10.1007/s12221-020-9804-010.1007/s12221-020-9804-0 ↗
42. Saba N, Jawaid M, Alothman OY, Paridah MT (2016) A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Constr Build Mater 106:149–159. https://doi.org/10.1016/j.conbuildmat.2015.12.07510.1016/j.conbuildmat.2015.12.075 ↗
43. Bassyouni M (2018) Dynamic mechanical properties and characterization of chemically treated sisal fiber-reinforced polypropylene biocomposites. J Reinf Plast Compos 37:1402–1417. https://doi.org/10.1177/073168441879804910.1177/0731684418798049 ↗
44. Sanjay MR, Jyotishkumar Parameswaranpillai SS, Jawaid M, Pruncu CI, Khan A (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation. Process Charact Carbohydr Polym 11:108. https://doi.org/10.1016/j.carbpol.2018.11.08310.1016/j.carbpol.2018.11.083 ↗
45. Kodgire P, Kalgaonkar R, Hambir S, Bulakh N (2010) PP/Clay nanocomposites: effect of clay treatment on morphology and dynamic mechanical properties. J Appl Polym Sci 81:1786–1792. https://doi.org/10.1002/app.161110.1002/app.1611 ↗
46. Karaduman Y, Sayeed MMA, Onal L, Rawal A (2014) Viscoelastic properties of surface modified jute fiber/polypropylene nonwoven composite. Compos Part B-Eng 67:111–118. https://doi.org/10.1016/j.compositesb.2014.06.01910.1016/j.compositesb.2014.06.019 ↗
47. Etaati A, Pather S, Fang Z, Wang H (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Compos Part B-Eng 62:19–28. https://doi.org/10.1016/j.compositesb.2014.02.01110.1016/j.compositesb.2014.02.011 ↗
48. Nayak SK, Mohanty S, Samal SK (2009) Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites. Mat Sci Eng A-Struct 523:32–38. https://doi.org/10.1016/j.msea.2009.06.02010.1016/j.msea.2009.06.020 ↗
49. Doan T-T-L, Brodowsky H, Mäder E (2007) Jute fibre/polypropylene composites II. Thermal, hydrothermal and dynamic mechanical behaviour. Compos Sci Technol 67:2707–2714. https://doi.org/10.1016/j.compscitech.2007.02.01110.1016/j.compscitech.2007.02.011 ↗
50. Zahedi M, Pirayesh H, Khanjanzadeh H, Tabar MM (2013) Organo-modified montmorillonite reinforced walnut shell/polypropylene composites. Mater Design 51:803–809. https://doi.org/10.1016/j.matdes.2013.05.00710.1016/j.matdes.2013.05.007 ↗
51. Ibrahim ID, Jamiru T, Sadiku RE, Kupolati WK, Agwuncha SC (2016) Dependency of the mechanical properties of sisal fiber reinforced recycled polypropylene composites on fiber surface treatment. Fiber Content Nanoclay J Polym Environ 25:427–434. https://doi.org/10.1007/s10924-016-0823-210.1007/s10924-016-0823-2 ↗