Latent heat storage capacity of NiTi shape memory alloy
Source abstract
Abstract
The largest amount of latent heat of the martensitic transformation in nickel titanium shape memory alloy was explored. The measured amounts of heat in the alloys with different compositions between 48.0 at.% Ni and 51.0 at.% Ni were compared. The largest amounts of -37.8 J/g in absorption and 34.8 J/g in emission were obtained as the averaged values of several samples with equiatomic composition. These magnitudes are close to those of novel heat storage ceramics, VO2 (51 J/g) and Ti3O5 (60 J/g), suggesting the NiTi alloy is potential candidate for heat storage material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Transition Metal Oxide Nanomaterials · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Aprea C, Greco A, Maiorino A, Masselli C (2020) The employment of caloric-effect materials for solid-state heat pumping. Int J Refrigeration 109:1–11. https://doi.org/10.1016/j.ijrefrig.2019.09.01110.1016/j.ijrefrig.2019.09.011 ↗
2. Bonnot E, Romero R, Manosa L, Vives E, Planes A (2008) Elastocaloric effect associated with the martensitic transition in shape-memory alloys. Phys Rev Lett 100:125901. https://doi.org/10.1103/PhysRevLett.100.12590110.1103/PhysRevLett.100.125901 ↗
3. Wendler F, Ossmer H, Chluba C, Quandt E (2017) Mesoscale simulation of elastocaloric cooling in SMA films. Acta Mater 136:105–117. https://doi.org/10.1016/j.actamat.2017.06.04410.1016/j.actamat.2017.06.044 ↗
4. Manõsa L, Jarque-Farnos S, Vives E, Planes A (2013) Large temperature span and giant refrigerant capacity in elastocaloric Cu-Zn-Al shape memory alloys. Appl Phys Lett 103:211904. https://doi.org/10.1063/1.483233910.1063/1.4832339 ↗
5. Tuśek J, Engelbrecht K, Mikkelsen LP, Pryds N (2015) Elastocaloric effect of Ni-Ti wire for application in a cooling device. J Appl Phys 117:124901. https://doi.org/10.1063/1.491387810.1063/1.4913878 ↗
6. Abhat A (1983) Low temperature latent heat thermal energy storage: heat storage materials. Sol Energy 30:313–332. https://doi.org/10.1016/0038-092X(83)90186-X10.1016/0038-092X(83)90186-X ↗
7. Zare M, Ketabchi M (2017) Effect of chromium element on transformation, mechanical and corrosion behavior of thermomechanically induced Cu-Al-Ni shape memory alloys. J Therm Anal Calorim 127:2113–2123. https://doi.org/10.1007/s10973-016-5839-210.1007/s10973-016-5839-2 ↗
8. Balo SN, Sel N (2012) Effect of thermal aging on transformation temperatures and some physical parameters of Cu-13.5wt.%Al-4at.%Ni shape memory alloy. Thermochim Acta 536:1–5. https://doi.org/10.1016/j.tca.2012.02.00710.1016/j.tca.2012.02.007 ↗
9. Yang CH, Lin HC, Lina KM, Tsai HK (2008) Effect of thermo-mechanical treatment on a Fe-30Mn-6Si shape memory alloy. Mater Sci Eng A 497:445–450. https://doi.org/10.1016/j.msea.2008.07.05710.1016/j.msea.2008.07.057 ↗
10. Czeppe T, Koval YN, Monastyrsky GE (1997) The microstructure and martensitic transformation in Ni-Al alloys with Yttrium addition. J Phys IV France 7(C5):173. https://doi.org/10.1051/jp4:199752710.1051/jp4:1997527 ↗
11. He Z, Zhou J (2003) Calorimetric investigation of martensitic transformation behavior in NiAlMnFe high-temperature shape memory alloy. J Mater Sci Lett 22:375–37610.1023/A:1022649227541 ↗
12. Jiang C, Muhammad Y, Deng L, Wu W, Xu H (2004) Composition dependence on the martensitic structures of the Mn-rich NiMnGa alloys. Acta Mater 52:2779–2785. https://doi.org/10.1016/j.actamat.2004.02.02410.1016/j.actamat.2004.02.024 ↗
13. Wang Y, Huang C, Gao J, Yang S, Ding X, Song X, Ren X (2012) Evidence for ferromagnetic strain glass in Ni-Ti. Appl Phys Lett 101:101913. https://doi.org/10.1063/1.475125010.1063/1.4751250 ↗
14. Liu J, Xia M, Huang Y, Zheng H, Li J (2006) Effect of annealing on the microstructure and martensitic transformation of magnetic shape memory alloys CoNiGa. J Alloys Compd 417:96–99. https://doi.org/10.1016/j.jallcom.2005.09.02610.1016/j.jallcom.2005.09.026 ↗
15. Otubo J, Rigo O, Coelho A, Neto C, Mei P (2008) The influence of carbon and oxygen content on the martensitic transformation temperatures and enthalpies of NiTi shape memory alloys. Mater Sci Eng A 481–482:639–642. https://doi.org/10.1016/j.msea.2007.02.13710.1016/j.msea.2007.02.137 ↗
16. Frenzel J, George EP, Dlouhy A, Somsen Ch, Wagner M, Eggeler G (2010) Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Mater 58:3444–3458. https://doi.org/10.1016/j.actamat.2010.02.01910.1016/j.actamat.2010.02.019 ↗
17. Frenzel J, Wieczorek A, Opahle I, Maaβ B, Drautx R, Eggeler G (2015) On the effect of alloy composition on martensitic start temperatures and latent heats in Ni-Ti-based shape memory alloys. Acta Mater 90:213–231. https://doi.org/10.1016/j.actamat.2015.02.02910.1016/j.actamat.2015.02.029 ↗
18. Otsuka K, Sawamura T, Shimizu K (1971) Crystal structure and internal defects of equiatomic TiNi martensite. Physica Status Solidi 5:457. https://doi.org/10.1002/pssa.221005022010.1002/pssa.2210050220 ↗
19. Berman HA, West ED, Rozer AG (1967) Anomalous heat capacity of TiNi. J Appl Phys 38:4473–4476. https://doi.org/10.1063/1.170915110.1063/1.1709151 ↗
20. Tang W, Sundman B, Sandstrom R, Qiu C (1999) New modelling of the B2 phase and its associated martensitic transformation in the Ti-Ni system. Acta Mater 47:3457–3468. https://doi.org/10.1016/S1359-6454(99)00193-710.1016/S1359-6454(99)00193-7 ↗
21. Brailovski V, Terriault P, Prokoshkin S (2002) Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys. J Mater Eng Perform 11:614–621. https://doi.org/10.1361/10599490277034359310.1361/105994902770343593 ↗
22. Hou H, Simsek E, Stassak D, Al Hasan N, Qian S, Otto R, Cui J, Takeuchi I (2017) Elastocaloric cooling of additive manufactured shape memory alloys with large latent heat. J Phys D: Appl Phys. https://doi.org/10.1088/1361-6463/aa85bf10.1088/1361-6463/aa85bf ↗
23. Yasuda Y, Kato H, Sasaki K (2012) Clausius-Duhem inequality description of superelasticity in Ni-Ti polycrystal as dissipative process. Scripta Mater 66:939–942. https://doi.org/10.1016/j.scriptamat.2012.02.03610.1016/j.scriptamat.2012.02.036 ↗
24. Wasilewski RJ, Butler SR, Hanlon JE, Worden D (1971) Homogeneity range and the martensitic transformation in TiNi. Metall Trans 2:229–23710.1007/BF02662662 ↗
25. Murray JL (1987) Phase diagram of binary titanium alloys. The Ni-Ti system. ASM International, Metals Park, Ohio, p 197–211
26. Tadayyon G, Mazinai M, Guo Y, Zeharjad SM, Tofail S, Biggs JP (2016) The effect of annealing on the mechanical properties and microstructural evolution of Ti-rich NiTi shape memory alloy. Mater Sci Eng A 662:546–577. https://doi.org/10.1016/j.msea.2016.03.00410.1016/j.msea.2016.03.004 ↗
27. Khalil-Allafi J, Dloughy A, Eggeler G (2002) Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations. Acta Mater 50:4255–4274. https://doi.org/10.1016/S1359-6454(02)00257-410.1016/S1359-6454(02)00257-4 ↗
28. Miyazaki S, Ohmi Y, Otsuka K, Suzuki Y (1982) Characteristics of deformation and transformation pseudoelasticity in Ti-Ni alloys. J de physique 43 supple 12:C4-255. https://doi.org/10.1051/jphyscol:198243410.1051/jphyscol:1982434 ↗
29. Todoroki T, Tamura H (1987) Effect of heat treatment after cold working on the phase transformation in TiNi alloy. Trans Japan Inst Metals 28:83–94. https://doi.org/10.2320/matertrans1960.28.8310.2320/matertrans1960.28.83 ↗
30. Michutta J, Somsen Ch, Yawny A, Dlouhy A, Eggeler G (2006) Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitates. Acta Mater 54:3525–3542. https://doi.org/10.1016/j.actamat.2006.03.03610.1016/j.actamat.2006.03.036 ↗
31. Khalil-Allafi J, Eggeler G, Schmahl WW, Sheptyakov D (2006) Quantitative phase analysis in microstructures which display multiple step martensitic transformations in Ni-rich NiTi shape memory alloys. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2006.02.14310.1016/j.msea.2006.02.143 ↗
32. Fan QC, Zhang YH, Wang YY, Sun MY, Meng YT, Huang SK, Wen YH (2017) Influence of transformation behavior and precipitates on the deformation behavior of Ni-rich NiTi alloys. Mater Sci Eng A 700:269–280. https://doi.org/10.1016/j.msea.2017.05.10710.1016/j.msea.2017.05.107 ↗
33. Kwarciak J, Morawiec H (1988) Some interpretation problem of thermal studies of the reversible martensitic transformation. J Mater Sci 23:551–557. https://doi.org/10.1007/BF0117468410.1007/BF01174684 ↗
34. Kato H, Sasaki K (2012) Avoiding error of determining the martensite finish temperature due to thermal inertia in differential scanning calorimetry: model and experiment of Ni-Ti and Cu-Al-Ni shape memory alloys. J Mater Sci 47:1399–1410. https://doi.org/10.1007/s10853-011-5919-410.1007/s10853-011-5919-4 ↗
35. Yamashita F, Wakoh M, Ishikawa K, Shibata H (2017) In situ observation of nonmetallic inclusion formation in NiTi alloys. Mater Trans 58:1729–1734. https://doi.org/10.2320/matertrans.M201715610.2320/matertrans.M2017156 ↗
36. Kato H, Yasuda Y, Sasaki K (2011) Thermodynamic assessment of the stabilization effect in deformed shape memory alloy martensite. Acta Mater 59:3955–3964. https://doi.org/10.1016/j.actamat.2011.03.02110.1016/j.actamat.2011.03.021 ↗
37. Berglund CN, Guggenheim HJ (1969) Electronic properties of VO2 near the semiconductor -metal transition. Phys Rev 185:1022. https://doi.org/10.1103/PhysRev.185.103410.1103/PhysRev.185.1034 ↗
38. Kato K, Lee J, Fujita A, Shirai T, Kinemuchi Y (2018) Influence of strain on latent heat of VO2 ceramics. J Alloys Compd 751(30):241–246. https://doi.org/10.1016/j.jallcom.2018.04.09410.1016/j.jallcom.2018.04.094 ↗
39. Tokoro H, Yoshikiyo M, Imoto K, Namai A, Nasu T, Nakagawa K, Ozaki N, Hakoe F, Tanaka K, Chiba K, Makiura R, Prassides K, Ohkoshi S (2015) External stimulation -controllable heat-storage ceramics. Nat Comm 6:7037. https://doi.org/10.1038/ncomms803710.1038/ncomms8037 ↗
40. Ohkoshi S, Tokoro H, Nagasawa K, Yoshikiyo M, Jia F, Namai A (2019) Low-pressure-responsive heat-storage ceramics for automobiles. Sci Reports 9(1303):10. https://doi.org/10.1038/s41598-019-49690-010.1038/s41598-019-49690-0 ↗